Header file helper.h is specified for tcg mode, move this file to
directory tcg. And create new file helper.h to include header
file in tcg mode.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20250423080417.3739809-2-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
MSI interrupt is triggered by writing message on specified memory address.
In generic it is used by PCI devices, and no device is connected pch MSI
irqchip with GPIO pin line method, here remove gpio input setting for MSI
controller.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Tested-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20250410085004.3577627-1-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Instead of having a compile-time TARGET_SUPPORTS_MTTCG definition,
have each target set the 'mttcg_supported' field in the TCGCPUOps
structure.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250405161320.76854-17-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Expose x86_tcg_ops symbol, then directly set it as
CPUClass::tcg_ops in TYPE_X86_CPU's class_init(),
using CONFIG_TCG #ifdef'ry. No need for the
AccelCPUClass::cpu_class_init() handler anymore.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250405161320.76854-3-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Expose riscv_tcg_ops symbol, then directly set it as
CPUClass::tcg_ops in TYPE_RISCV_CPU's class_init(),
using CONFIG_TCG #ifdef'ry. No need for the
AccelCPUClass::cpu_class_init() handler anymore.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250405161320.76854-2-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Delay the warning to tcg_init_machine, because we will
have resolved the CPUClass at that point.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use the OnOffAuto type as 3-state.
Since the TCGState instance is zero-initialized, the
mttcg_enabled is initialzed as AUTO (ON_OFF_AUTO_AUTO).
In tcg_init_machine(), if mttcg_enabled is still AUTO,
set a default value (effectively inlining the
default_mttcg_enabled() method content).
In the tcg_get_thread() getter, consider AUTO / OFF states
as "single", otherwise ON is "multi".
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In qemu_tcg_mttcg_enabled, read the value from TCGState
and eliminate the separate global variable.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
qemu_tcg_mttcg_enabled() is specific to 1/ TCG and
2/ system emulation. Move the prototype declaration
to "system/tcg.h", reducing 'mttcg_enabled' variable
scope.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250403220420.78937-17-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In effect, hoist the check for mttcg from tcg_n_regions()
to tcg_init_machine().
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
By directly using TCGCPUOps::guest_default_memory_order,
we don't need the TCG_GUEST_DEFAULT_MO definition anymore.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In order to use TCG with multiple targets, replace the
compile time use of TCG_GUEST_DEFAULT_MO by a runtime access
to TCGCPUOps::guest_default_memory_order via CPUState.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In preparation of having tcg_req_mo() access CPUState in
the next commit, pass it to cpu_req_mo(), its single caller.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use TCGCPUOps::guest_default_memory_order to set TCGContext::guest_mo.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add the TCGCPUOps::guest_default_memory_order field and have
each target initialize it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that TCG_GUEST_DEFAULT_MO is always defined,
simplify the tcg_req_mo() macro.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We only require the TCG_GUEST_DEFAULT_MO for MTTCG-enabled
frontends, otherwise we use a default value of TCG_MO_ALL.
In order to simplify, require the definition for all targets,
defining it for hexagon, m68k, rx, sh4 and tricore.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Only 2 files requiring "accel/tcg/cpu-ldst.h" API do not
include it:
- accel/tcg/cpu-exec.c
- target/arm/tcg/sve_helper.c
Include it there and remove it from "exec/exec-all.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Do not define TARGET_INSN_START_EXTRA_WORDS under the
hood, have each target explicitly define it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
To avoid including the huge "cpu.h" for a simple definition,
move TARGET_INSN_START_EXTRA_WORDS to "cpu-param.h".
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
tb_check_watchpoint() calls cpu_get_tb_cpu_state(),
which is declared in each "cpu.h" header. It is indirectly
included via "tcg/insn-start-words.h". Since we want to
rework "tcg/insn-start-words.h", removing "cpu.h" in the
next commit, add the missing header now, otherwise we'd
get:
accel/tcg/translate-all.c:598:9: error: call to undeclared function 'cpu_get_tb_cpu_state' [-Wimplicit-function-declaration]
598 | cpu_get_tb_cpu_state(env, &pc, &cs_base, &flags);
| ^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
As Richard mentioned:
We should allow RV128 in user-mode at all until there's a
kernel abi for it.
Remove the experimental 'x-rv128' CPU on user emulation
(since it is experimental, no deprecation period is required).
Reported-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now we eliminated poisoned identifiers from headers, this file can now
be compiled once for all arm targets.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250325045915.994760-25-pierrick.bouvier@linaro.org>
Those files will be compiled once per base architecture ("arm" in this
case), instead of being compiled for every variant/bitness of
architecture.
We make sure to not include target cpu definitions (exec/cpu-defs.h) by
defining header guard directly. This way, a given compilation unit can
access a specific cpu definition, but not access to compile time defines
associated.
Previous commits took care to clean up some headers to not rely on
cpu-defs.h content.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250325045915.994760-24-pierrick.bouvier@linaro.org>
At worst, for 32-bit arm binary, using these methods will
now produce a link time error, instead of a compile time one.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250403235821.9909-37-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
To eliminate TARGET_AARCH64, we need to make various definitions common
between 32 and 64 bit Arm targets.
Added registers are used only by aarch64 code, and the only impact is on
the size of CPUARMState, and added zarray
(ARMVectorReg zarray[ARM_MAX_VQ * 16]) member (+64KB)
It could be eventually possible to allocate this array only for aarch64
emulation, but I'm not sure it's worth the hassle to save a few KB per
vcpu. Running qemu-system takes already several hundreds of MB of
(resident) memory, and qemu-user takes dozens of MB of (resident) memory
anyway.
As part of this, we define ARM_MAX_VQ once for aarch32 and aarch64,
which will affect zregs field for aarch32.
This field is used for MVE and SVE implementations. MVE implementation
is clipping index value to 0 or 1 for zregs[*].d[],
so we should not touch the rest of data in this case anyway.
This change is safe regarding migration, because aarch64 registers still
have the same size, and for aarch32, only zregs is modified.
Migration code explicitly specify a size of 2 for env.vfp.zregs[0].d,
VMSTATE_UINT64_SUB_ARRAY(env.vfp.zregs[0].d, ARMCPU, 0, 2). So extending
the storage size has no impact.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250325045915.994760-22-pierrick.bouvier@linaro.org>
Do not rely on target dependent type, but use a fixed type instead.
Since the original type is unsigned, it is safe to extend its size
without any side effect.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250325045915.994760-21-pierrick.bouvier@linaro.org>
This does not hurt, even if they are not used.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250325045915.994760-20-pierrick.bouvier@linaro.org>
We prevent common code to use this define by mistake.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250325045915.994760-19-pierrick.bouvier@linaro.org>
This define is used only in accel/kvm/kvm-all.c, so we push directly the
definition there. Add more visibility to kvm_arch_on_sigbus_vcpu() to
allow removing this define from any header.
The architectures defining KVM_HAVE_MCE_INJECTION are i386, x86_64 and
aarch64.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250325045915.994760-18-pierrick.bouvier@linaro.org>
Now we made sure important defines are included using their direct
path, we can remove cpu.h from cpu-all.h.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250325045915.994760-14-pierrick.bouvier@linaro.org>
We prepare to remove cpu.h from cpu-all.h, which will transitively
remove it from accel/tcg/tb-internal.h, and thus from most of tcg
compilation units.
Note: this was caught by a test regression for s390x-softmmu.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250325045915.994760-13-pierrick.bouvier@linaro.org>
We prepare to remove cpu.h from cpu-all.h, which will transitively
remove it from accel/tcg/tb-internal.h, and thus from most of tcg
compilation units.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250325045915.994760-12-pierrick.bouvier@linaro.org>
We include this header where needed. When includes set already have
ifdef CONFIG_USER_ONLY, we add it here, else, we don't condition the
include.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250325045915.994760-5-pierrick.bouvier@linaro.org>
