The PL011 Technical Reference Manual lists the "real" size of the
registers in table 3-1, and only rounds up to the next byte when
describing the registers; for example, UARTDR is listed as having
width 12/8 (12 bits read, 8 written) and only bits 15:0 are listed
in "Table 3-2 UARTDR Register".
However, in practice these are 32-bit registers, accessible only
through 32-bit MMIO accesses; preserving the fiction that they're
smaller introduces multiple casts (to go from the bilge bitfield
type to e.g u16 to u64) and more importantly it breaks the
migration stream because the Rust vmstate macros are not yet
type safe.
So, just make everything 32-bits wide.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Data struct is wrong, and does not show how bits 8-15 of DR
are the receive status. Fix it, and use it to fix break
errors ("c >> 8" in the C code does not translate to
"c.to_be_bytes()[3]").
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For CR, the ugly-ish "0.into()" idiom is already hidden within the
reset method. Do not repeat it.
For FR, standardize on reset() being equivalent to "*self = Self::default()"
and let reset_fifo toggle only the bits that are related to FIFOs. This
commit also reproduces C commit 02b1f7f619 ("hw/char/pl011: Split RX/TX
path of pl011_reset_fifo()", 2024-09-13).
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Check loopback_enabled(), not fifo_enabled(), like the C code.
Also, set_break_error() must not happen until the break is read from
the FIFO.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The bits in the LineControl struct were backwards. :(
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since commit 5286c36622 ("target/i386: properly reset TSC on reset")
QEMU writes the special value of "1" to each online vCPU TSC on VM reset
to reset it.
However parked vCPUs don't get that handling and due to that their TSCs
get desynchronized when the VM gets reset.
This in turn causes KVM to turn off PVCLOCK_TSC_STABLE_BIT in its exported
PV clock.
Note that KVM has no understanding of vCPU being currently parked.
Without PVCLOCK_TSC_STABLE_BIT the sched clock is marked unstable in
the guest's kvm_sched_clock_init().
This causes a performance regressions to show in some tests.
Fix this issue by writing the special value of "1" also to TSCs of parked
vCPUs on VM reset.
Reproducing the issue:
1) Boot a VM with "-smp 2,maxcpus=3" or similar
2) device_add host-x86_64-cpu,id=vcpu,node-id=0,socket-id=0,core-id=2,thread-id=0
3) Wait a few seconds
4) device_del vcpu
5) Inside the VM run:
# echo "t" >/proc/sysrq-trigger; dmesg | grep sched_clock_stable
Observe the sched_clock_stable() value is 1.
6) Reboot the VM
7) Once the VM boots once again run inside it:
# echo "t" >/proc/sysrq-trigger; dmesg | grep sched_clock_stable
Observe the sched_clock_stable() value is now 0.
Fixes: 5286c36622 ("target/i386: properly reset TSC on reset")
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Link: https://lore.kernel.org/r/5a605a88e9a231386dc803c60f5fed9b48108139.1734014926.git.maciej.szmigiero@oracle.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In case of incorrect parameters, kvm_convert_memory() was returning
-1 instead of -EINVAL. The guest won't notice because it will move
anyway to RUN_STATE_INTERNAL_ERROR, but fix this for consistency and
clarity.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
One recurring issue when writing Rust bindings is how to convert a Rust
function ("fn" or "impl Fn") to a C function, and how to pass around
"self" to a C function that only takes a void*.
An easy solution would be to store on the heap a pair consisting of
a pointer to the Rust function and the pointer to "self", but it is
possible to do better. If an "Fn" has zero size (that is, if it is a
zero-capture closures or a function pointer---which in turn includes all
methods), it is possible to build a generic Rust function that calls it
even if you only have the type; you don't need either the pointer to the
function itself (because the address of the code is part of the type)
or any closure data (because it has size zero).
Introduce a wrapper that provides the functionality of calling the
function given only its type.
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add an example of implementing instance methods and converting the
result back to a Rust type. In this case the returned types are a
string (actually a Cow<str>; but that's transparent as long as it derefs
to &str) and a QOM class.
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add traits that let client cast typecast safely between object types.
In particular, an upcast is compile-time guaranteed to succeed, and a
YOLO C-style downcast must be marked as unsafe.
The traits are based on an IsA<> trait that declares what
is a subclass of what, which is an idea taken from glib-rs
(https://docs.rs/glib/latest/glib/object/trait.IsA.html).
The four primitives are also taken from there
(https://docs.rs/glib/latest/glib/object/trait.Cast.html). However,
the implementation of casting itself is a bit different and uses the
Deref trait.
This removes some pointer arithmetic from the pl011 device; it is also a
prerequisite for the definition of methods, so that they can be invoked
on all subclass structs. This will use the IsA<> trait to detect the
structs that support the methods.
glib also has a "monadic" casting trait which could be implemented on
Option (as in https://docs.rs/glib/latest/glib/object/trait.CastNone.html)
and perhaps even Result. For now I'm leaving it out, as the patch is
already big enough and the benefit seems debatable.
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Right now, the stub BQL in stubs/iothread-lock.c always reports itself as
unlocked. However, Rust would like to run its tests in an environment where
the BQL *is* locked. Provide an extremely dirty function that flips the
return value of bql_is_locked() to true.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Long term we do not want device code to use "bindings" at all, so make it
possible to get the relevant types from the other modules of qemu-api.
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A full match would mean calling them qom::object and hw::core::qdev. For now,
keep the names shorter but still a bit easier to find.
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a blanket definition of ClassInitImpl<ObjectClass> that thunks
ObjectImpl::UNPARENT and overrides it in ObjectClass if it is not
None.
ClassInitImpl<DeviceClass> can now call its superclass's ClassInitImpl,
so that the C and Rust hierarchies match more closely.
This is mostly done as an example of implementing the metaclass
hierarchy under ClassInitImpl.
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Parameterize the implementation of ClassInitImpl so that it is
possible to call up the chain of implementations, one superclass at
a time starting at ClassInitImpl<Self::Class>.
In order to avoid having to implement (for example)
ClassInitImpl<PL011Class>, also remove the dummy PL011Class and
PL011LuminaryClass structs and specify the same ObjectType::Class as
the superclass. In the future this default behavior can be handled by
a procedural macro, by looking at the first field in the struct.
Note that the new trait is safe: the calls are started by
rust_class_init<>(), which is not public and can convert the class
pointer to a Rust reference.
Since CLASS_BASE_INIT applies to the type that is being defined,
and only to it, move it to ObjectImpl.
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Via sed "s/ Property [*]/ const Property */".
The opaque pointers passed to ObjectProperty callbacks are
the last instances of non-const Property pointers in the tree.
For the most part, these callbacks only use object_field_prop_ptr,
which now takes a const pointer itself.
This logically should have accompanied d36f165d95 which
allowed const Property to be registered.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Link: https://lore.kernel.org/r/20241218134251.4724-25-richard.henderson@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This logically should have accompanied d36f165d95 which
allowed const Property to be registered.
There is exactly one instance of this method: print_pci_devfn.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Link: https://lore.kernel.org/r/20241218134251.4724-24-richard.henderson@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This logically should have accompanied d36f165d95 which
allowed const Property to be registered.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Link: https://lore.kernel.org/r/20241218134251.4724-23-richard.henderson@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that all of the Property arrays are counted, we can remove
the terminator object from each array. Update the assertions
in device_class_set_props to match.
With struct Property being 88 bytes, this was a rather large
form of terminator. Saves 30k from qemu-system-aarch64.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Link: https://lore.kernel.org/r/20241218134251.4724-21-richard.henderson@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These are not arrays of Property and had no business
using DEFINE_PROP_END_OF_LIST. Use plain { } instead.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Link: https://lore.kernel.org/r/20241218134251.4724-20-richard.henderson@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All uses of device_class_set_props() are now using arrays.
Validate this compile-time in the device_class_set_props macro and
call device_class_set_props_n using the known size of the array.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Link: https://lore.kernel.org/r/20241218134251.4724-19-richard.henderson@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This means we can update declare_properties to drop the
zero terminator at the end of the array as well.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Link: https://lore.kernel.org/r/20241218134251.4724-18-richard.henderson@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Export the migration_properties array size from options.c;
use that to feed device_class_set_props_n. We must remove
DEFINE_PROP_END_OF_LIST so the count is correct.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Link: https://lore.kernel.org/r/20241218134251.4724-15-richard.henderson@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Record the size of the array in DeviceClass.props_count_.
Iterate with known count in qdev_prop_walk.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Link: https://lore.kernel.org/r/20241218134251.4724-14-richard.henderson@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a macro expansion of device_class_set_props which can check
on the type and size of PROPS before calling the function.
Avoid the macro in migration.c because migration_properties
is defined externally with indeterminate size.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Link: https://lore.kernel.org/r/20241218134251.4724-13-richard.henderson@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no point in registering no properties.
Remove xen_sysdev_class_init entirely, as it did nothing else.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Link: https://lore.kernel.org/r/20241218134251.4724-10-richard.henderson@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not register an empty set of properties.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Link: https://lore.kernel.org/r/20241218134251.4724-7-richard.henderson@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Avoid the empty property list for user-only mode.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Link: https://lore.kernel.org/r/20241218134251.4724-5-richard.henderson@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove definition about LoongArchExtIOI and LOONGARCH_EXTIOI, and
replace them with LoongArchExtIOICommonState and macro
LOONGARCH_EXTIOI_COMMON separately. Also remove unnecessary header
files.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Add vmstate pre_save interface, which can be used extioi kvm driver
in future.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Set TYPE_LOONGARCH_EXTIOI inherit from TYPE_LOONGARCH_EXTIOI_COMMON
object, it shares vmsate and property of TYPE_LOONGARCH_EXTIOI_COMMON,
and has its own realize() function.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Add new common file loongarch_extioi_common.c, and move vmstate
and property structure to common file.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
For loongarch extioi emulation driver, add unrealize interface and
remove instance_finalize interface and move the code to unrealize
interface.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Add common realize function, it is only to check validity of property.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
With some structure such as vmstate and property, rename LoongArchExtIOI
with LoongArchExtIOICommonState, these common structure will be moved
to common file.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Rename structure LoongArchExtIOI with LoongArchExtIOICommonState,
since it is defined in file loongarch_extioi_common.h
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Move definiton of structure LoongArchExtIOI from header file loongarch_extioi.h
to file loongarch_extioi_common.h.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Add common header file include/hw/intc/loongarch_extioi_common.h, and
move some macro definition from include/hw/intc/loongarch_extioi.h to
the common header file.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
