../tests/qtest/libqos/igb.c:106:5: runtime error: load of misaligned address 0x562040be8e33 for type 'uint32_t', which requires 4 byte alignment
Instead of straight casting the uint8_t array, we can use ldl_le_p and
lduw_l_p to assure the unaligned access works properly against
uint32_t and uint16_t.
Signed-off-by: Nabih Estefan <nabihestefan@google.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250429155621.2028198-1-nabihestefan@google.com>
[AJB: fix commit message, remove unneeded casts]
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Akihiko Odaki <odaki@rsg.ci.i.u-tokyo.ac.jp>
Message-ID: <20250603110204.838117-5-alex.bennee@linaro.org>
The logic in the qvirtio_read/write function is rather a headache,
involving byte-swapping when the target is big endian, just to
maybe involve another byte-swapping in the qtest_read/write
function immediately afterwards (on the QEMU side). Let's do it in
a more obvious way here: For virtio 1.0, we know that the values have
to be little endian, so let's read/write the bytes in that well known
order here.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-ID: <20250430132817.610903-1-thuth@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Add and implement functions to 9pfs test client for sending a 9p2000.L
'Tsetattr' request and receiving its 'Rsetattr' response counterpart.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20250312152933.383967-6-groug@kaod.org>
A few functions now end with a label. The next commit will clean them
up.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250407082643.2310002-3-armbru@redhat.com>
[Straightforward conflict with commit 988ad4cceb (hw/loongarch/virt:
Fix cpuslot::cpu set at last in virt_cpu_plug()) resolved]
Features:
SR-IOV emulation for pci
virtio-mem-pci support for s390
interleave support for cxl
big endian support for vdpa svq
new QAPI events for vhost-user
Also vIOMMU reset order fixups are in.
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAme4b8sPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpHKcIAKPJsVqPdda2dJ7b7FdyRT0Q+uwezXqaGHd4
7Lzih1wsxYNkwIAyPtEb76/21qiS7BluqlUCfCB66R9xWjP5/KfvAFj4/r4AEduE
fxAgYzotNpv55zcRbcflMyvQ42WGiZZHC+o5Lp7vDXUP3pIyHrl0Ydh5WmcD+hwS
BjXvda58TirQpPJ7rUL+sSfLih17zQkkDcfv5/AgorDy1wK09RBKwMx/gq7wG8yJ
twy8eBY2CmfmFD7eTM+EKqBD2T0kwLEeLfS/F/tl5Fyg6lAiYgYtCbGLpAmWErsg
XZvfZmwqL7CNzWexGvPFnnLyqwC33WUP0k0kT88Y5wh3/h98blw=
=tej8
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: features, fixes, cleanups
Features:
SR-IOV emulation for pci
virtio-mem-pci support for s390
interleave support for cxl
big endian support for vdpa svq
new QAPI events for vhost-user
Also vIOMMU reset order fixups are in.
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAme4b8sPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpHKcIAKPJsVqPdda2dJ7b7FdyRT0Q+uwezXqaGHd4
# 7Lzih1wsxYNkwIAyPtEb76/21qiS7BluqlUCfCB66R9xWjP5/KfvAFj4/r4AEduE
# fxAgYzotNpv55zcRbcflMyvQ42WGiZZHC+o5Lp7vDXUP3pIyHrl0Ydh5WmcD+hwS
# BjXvda58TirQpPJ7rUL+sSfLih17zQkkDcfv5/AgorDy1wK09RBKwMx/gq7wG8yJ
# twy8eBY2CmfmFD7eTM+EKqBD2T0kwLEeLfS/F/tl5Fyg6lAiYgYtCbGLpAmWErsg
# XZvfZmwqL7CNzWexGvPFnnLyqwC33WUP0k0kT88Y5wh3/h98blw=
# =tej8
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 21 Feb 2025 20:21:31 HKT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (41 commits)
docs/devel/reset: Document reset expectations for DMA and IOMMU
hw/vfio/common: Add a trace point in vfio_reset_handler
hw/arm/smmuv3: Move reset to exit phase
hw/i386/intel-iommu: Migrate to 3-phase reset
hw/virtio/virtio-iommu: Migrate to 3-phase reset
vhost-user-snd: correct the calculation of config_size
net: vhost-user: add QAPI events to report connection state
hw/virtio/virtio-nsm: Respond with correct length
vdpa: Fix endian bugs in shadow virtqueue
MAINTAINERS: add more files to `vhost`
cryptodev/vhost: allocate CryptoDevBackendVhost using g_mem0()
vhost-iova-tree: Update documentation
vhost-iova-tree, svq: Implement GPA->IOVA & partial IOVA->HVA trees
vhost-iova-tree: Implement an IOVA-only tree
amd_iommu: Use correct bitmask to set capability BAR
amd_iommu: Use correct DTE field for interrupt passthrough
hw/virtio: reset virtio balloon stats on machine reset
mem/cxl_type3: support 3, 6, 12 and 16 interleave ways
hw/mem/cxl_type3: Ensure errp is set on realization failure
hw/mem/cxl_type3: Fix special_ops memory leak on msix_init_exclusive_bar() failure
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The PCI Local Bus Specification says the result of writes to MSI-X
PBA memory is undefined. QEMU implements them as no-ops, so remove
the pointless write from qpci_msix_pending().
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20250117172244.406206-2-npiggin@gmail.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- add a check-rust test to docker builds
- re-factor the qtest logic to be cleaner
- fix tests to not clock_step when no timers enabled
- roll-up log prefix into qtest_send
- cleaner error reporting when qtest_clock_set fails
- revert old deadlock fix now tests are updated
- only run full set of migration tests under HW acceleration
- support late attachment to user-mode gdbstubs
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmeqBSsACgkQ+9DbCVqe
KkQS/Af+K0hpdGc1msiuMsqmuESBvhoQniYZFLN1/pwe2KpG8i/+fq2fsCuxJhJ1
2TzPH7aj54p9MGCZf2k9JLhO22XldN+oezZMc1crhoWK0AtrWhnLs58I2oEPIsUo
NmGO6Zfm98ge89o2y8GCvd0QXAtUf+jduDKnW0mfnOnw+w/mky5KzWS7/1091VGW
42LSY4KnqgdLSqLyuLBOrgADEjB1ChWS4/bSC+kEYSGrmNQB+n1KeIzzlJBGpOr0
Z9yzmhMCm7TWdkFNPmnVfYH/7ZUNcpv6PtQSpkku4f6b/gybyvJBknHpM4i+Gpb5
87wSjljrCpdNm/9KFRjiJuUWdS/jCg==
=UF0n
-----END PGP SIGNATURE-----
Merge tag 'pull-10.0-testing-and-gdstub-updates-100225-1' of https://gitlab.com/stsquad/qemu into staging
testing and gdbstub updates:
- add a check-rust test to docker builds
- re-factor the qtest logic to be cleaner
- fix tests to not clock_step when no timers enabled
- roll-up log prefix into qtest_send
- cleaner error reporting when qtest_clock_set fails
- revert old deadlock fix now tests are updated
- only run full set of migration tests under HW acceleration
- support late attachment to user-mode gdbstubs
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmeqBSsACgkQ+9DbCVqe
# KkQS/Af+K0hpdGc1msiuMsqmuESBvhoQniYZFLN1/pwe2KpG8i/+fq2fsCuxJhJ1
# 2TzPH7aj54p9MGCZf2k9JLhO22XldN+oezZMc1crhoWK0AtrWhnLs58I2oEPIsUo
# NmGO6Zfm98ge89o2y8GCvd0QXAtUf+jduDKnW0mfnOnw+w/mky5KzWS7/1091VGW
# 42LSY4KnqgdLSqLyuLBOrgADEjB1ChWS4/bSC+kEYSGrmNQB+n1KeIzzlJBGpOr0
# Z9yzmhMCm7TWdkFNPmnVfYH/7ZUNcpv6PtQSpkku4f6b/gybyvJBknHpM4i+Gpb5
# 87wSjljrCpdNm/9KFRjiJuUWdS/jCg==
# =UF0n
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 10 Feb 2025 08:54:51 EST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-10.0-testing-and-gdstub-updates-100225-1' of https://gitlab.com/stsquad/qemu:
tests/tcg: Add late gdbstub attach test
docs/user: Document the %d placeholder and suspend=n QEMU_GDB features
gdbstub: Allow late attachment
osdep: Introduce qemu_kill_thread()
user: Introduce host_interrupt_signal
user: Introduce user/signal.h
gdbstub: Try unlinking the unix socket before binding
gdbstub: Allow the %d placeholder in the socket path
tests/qtest/migration: Pick smoke tests
tests/qtest/migration: Add --full option
Revert "util/timer: avoid deadlock when shutting down"
tests/qtest: tighten up the checks on clock_step
tests/qtest: rename qtest_send_prefix and roll-up into qtest_send
tests/qtest: simplify qtest_process_inbuf
tests/qtest: don't step clock at start of npcm7xx periodic IRQ test
tests/qtest: don't attempt to clock_step while waiting for virtio ISR
tests/docker: replicate the check-rust-tools-nightly CI job
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The general expectation is that header files should follow the same
file/path naming scheme as the corresponding source file. There are
various historical exceptions to this practice in QEMU, with one of
the most notable being the include/qapi/qmp/ directory. Most of the
headers there correspond to source files in qobject/.
This patch corrects most of that inconsistency by creating
include/qobject/ and moving the headers for qobject/ there.
This also fixes MAINTAINERS for include/qapi/qmp/dispatch.h:
scripts/get_maintainer.pl now reports "QAPI" instead of "No
maintainers found".
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com> #s390x
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20241118151235.2665921-2-armbru@redhat.com>
[Rebased]
This replicates the changes from 92cb8f8bf6 (tests/qtest: remove
clock_steps from virtio tests) as there are no timers in the virtio
code. We still busy wait and timeout though.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250207153112.3939799-3-alex.bennee@linaro.org>
At present, the libqos/fw_cfg.c library does not support the modern DMA
interface which is required to write to the fw_cfg files. It only uses the IO
interface. Implement read and write methods based on DMA. This will enable
developers to add tests that writes to the fw_cfg file(s). The structure of
the code is taken from edk2 fw_cfg implementation. It has been tested by
writing a qtest that writes to a fw_cfg file.
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Message-ID: <20250120043847.954881-3-anisinha@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
fw-cfg file directory iteration code can be used by other functions that may
want to implement fw-cfg file operations. Refactor it into a smaller helper
so that it can be reused.
No functional change.
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Message-ID: <20250120043847.954881-2-anisinha@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Split IPACK Kconfig key as {IPACK, TPCI200, IP_OCTAL_232}
- IPack is a bus
- TPCI200 is a PCI device providing an IPack bus
- IP-Octal232 is an IPack device plugged on an IPack bus
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Fabiano Rosas <farosas@suse.de>
Message-Id: <20250121155526.29982-3-philmd@linaro.org>
Per [*]:
"we're only interested in adopting SPDX for recording the
licensing info, [not] any other SPDX metadata."
Replace the 'SPDX-FileCopyrightText' and 'SPDX-FileContributor'
tags added by Linaro by 'Copyright (c)' and 'Authors' words
respectively.
[*] https://lore.kernel.org/qemu-devel/20241007154548.1144961-4-berrange@redhat.com/
Inspired-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
DEVICE state was introduced back in 2017:
https://lore.kernel.org/qemu-devel/20171020090556.18631-1-dgilbert@redhat.com/
Quote from Dave's cover letter, when the pre-switchover phase was enabled,
the state transition looks like this:
The precopy flow is:
active->pre-switchover->device->completed
The postcopy flow is:
active->pre-switchover->postcopy-active->completed
To supplement above, when the cap is not enabled:
The precopy flow is:
active->completed
The postcopy flow is:
active->postcopy-active->completed
It works for us, though we have some code just to special case these state
transitions, so the DEVICE state currently is special only to precopy, and
only conditionally.
I had a quick discussion with Libvirt developers, it turns out that this
may not be necessary. IOW, it seems okay we can have DEVICE state to be
generic, so that we don't have over-complicated state machines. It not
only helps align all the migration state machine, help cleanup the code
path especially on pre-switchover handling (see the patch itself), another
side benefit is we can unconditionally have a specific state to mark the
switchover phase, which might be helpful for debugging too.
This patch makes the DEVICE state to be present always, marking that source
QEMU is switching over. Then the state machine will be always as simple
as:
active-> [pre-switchover->] -> device -> [postcopy-active->] -> complete
After the change, no matter whether pre-switchover or postcopy is enabled
or not, we always have DEVICE state showing the switchover phase. When
pre-switchover enabled, we'll have an extra stage before that. When
postcopy is enabled, we'll have an extra stage after that.
A few qtests need touch up in QEMU tree for this change:
- A few iotest outputs (194, 203, 234, 262, 280)
- Teach libqos's migrate() on "device" state
Cc: Jiri Denemark <jdenemar@redhat.com>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Dr. David Alan Gilbert <dave@treblig.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Tested-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Juraj Marcin <jmarcin@redhat.com>
Link: https://lore.kernel.org/r/20250114230746.3268797-15-peterx@redhat.com
Signed-off-by: Fabiano Rosas <farosas@suse.de>
A number of copy and paste kdoc comments are referring to the wrong
definition. Fix those cases.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250116160306.1709518-29-alex.bennee@linaro.org>
In the qtest environment time will not step forward if the system is
paused (timers disabled) or we have no timer events to fire. As a
result VirtIO events are responded to directly and we don't need to
step time forward.
We still do timeout processing to handle the fact the target QEMU may
not be ready to respond right away. This will usually be due to a slow
CI system or if QEMU is running under something like rr.
Future qtest patches will assert that time actually changes when a
step is requested.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250108121054.1126164-17-alex.bennee@linaro.org>
'Tgetattr' 9p request and its 'Rgetattr' response types are already used
by test client, however this response type is yet missing in function
rmessage_name(), so add it.
Fixes: a6821b8284 ("tests/9pfs: compare QIDs in fs_walk_none() test")
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <e183da80d390cfd7d55bdbce92f0ff6e3e5cdced.1732465720.git.qemu_oss@crudebyte.com>
All 9p response types are prefixed with an "R", therefore fix
"READDIR" -> "RREADDIR" in function rmessage_name().
Fixes: 4829469fd9 ("tests/virtio-9p: added readdir test")
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <daad7af58b403aaa2487c566032beca36664b30e.1732465720.git.qemu_oss@crudebyte.com>
Add an additional test to further exercise the IOMMU where we attempt to
initialize the command, fault and page-request queues.
These steps are taken from chapter 6.2 of the RISC-V IOMMU spec,
"Guidelines for initialization". It emulates what we expect from the
software/OS when initializing the IOMMU.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241016204038.649340-12-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
To test the RISC-V IOMMU emulation we'll use its PCI representation.
Create a new 'riscv-iommu-pci' libqos device that will be present with
CONFIG_RISCV_IOMMU. This config is only available for RISC-V, so this
device will only be consumed by the RISC-V libqos machine.
Start with basic tests: a PCI sanity check and a reset state register
test. The reset test was taken from the RISC-V IOMMU spec chapter 5.2,
"Reset behavior".
More tests will be added later.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241016204038.649340-8-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Remove the 'n800' and 'n810' machine types, which modelled
Nokia internet tablets. These were deprecated in 9.0 and
so we can remove them for 9.2.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-26-peter.maydell@linaro.org
[PMM: added removal of arm-n800-machine.c post-review]
Currently setup_sd_card() asks the card its address,
but discard the response and use hardcoded 0x4567.
Set the SDHC_CMD_RESPONSE bit to have the controller
record the bus response, and read the response from
the RSPREG0 register. Then we can select the card with
its real address.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240702140842.54242-4-philmd@linaro.org>
The non-standard .fa library suffix breaks the link source
de-duplication done by Meson so drop it.
The lack of link source de-duplication causes AddressSanitizer to
complain ODR violations, and makes GNU ld abort when combined with
clang's LTO.
Fortunately, the non-standard suffix is not necessary anymore for
two reasons.
First, the non-standard suffix was necessary for fork-fuzzing.
Meson wraps all standard-suffixed libraries with --start-group and
--end-group. This made a fork-fuzz.ld linker script wrapped as well and
broke builds. Commit d2e6f9272d ("fuzz: remove fork-fuzzing
scaffolding") dropped fork-fuzzing so we can now restore the standard
suffix.
Second, the libraries are not even built anymore, because it is
possible to just use the object files directly via extract_all_objects().
The occurences of the suffix were detected and removed by performing
a tree-wide search with 'fa' and .fa (note the quotes and dot).
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20240524-xkb-v4-4-2de564e5c859@daynix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We used to request declare_dependency() to link_whole static libraries.
If a static library is a thin archive, GNU ld keeps all object files
referenced by the archive open, and sometimes exceeds the open file limit.
Another problem with link_whole is that suboptimal handling of nested
dependencies.
link_whole by itself does not propagate dependencies. In particular,
gnutls, a dependency of crypto, is not propagated to its users, and we
currently workaround the issue by declaring gnutls as a dependency for
each crypto user. On the other hand, if you write something like
libfoo = static_library('foo', 'foo.c', dependencies: gnutls)
foo = declare_dependency(link_whole: libfoo)
libbar = static_library('bar', 'bar.c', dependencies: foo)
bar = declare_dependency(link_whole: libbar, dependencies: foo)
executable('prog', sources: files('prog.c'), dependencies: [foo, bar])
hoping to propagate the gnutls dependency into bar.c, you'll see a
linking failure for "prog", because the foo.c.o object file is included in
libbar.a and therefore it is linked twice into "prog": once from libfoo.a
and once from libbar.a. Here Meson does not see the duplication, it
just asks the linker to link all of libfoo.a and libbar.a into "prog".
Instead of using link_whole, extract objects included in static libraries
and pass them to declare_dependency(); and then the dependencies can be
added as well so that they are propagated, because object files on the
linker command line are always deduplicated.
This requires Meson 1.1.0 or later.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20240524-objects-v1-1-07cbbe96166b@daynix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The spapr QEMU machine defaults is useful outside libqos, so create a
new header for ppc specific qtests and move it there.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Add loongarch virt machine to the graph. It is a modified copy of
the existing riscv virtmachine in riscv-virt-machine.c
It contains a generic-pcihost controller, and an extra function
loongarch_config_qpci_bus() to configure GPEX pci host controller
information, such as ecam and pio_base addresses.
Also hotplug handle checking about TYPE_VIRTIO_IOMMU_PCI device is
added on loongarch virt machine, since virtio_mmu_pci device requires
it.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240528082053.938564-1-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
The messages for assertions using hexadecimal numbers will be
easier to understand with `g_assert_cmphex`.
Cases changed : "cmpuint.*0x", "cmpuint.*<<"
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Ninad Palsule <ninad@linux.ibm.com>
Message-ID: <20240414173349.31194-1-ines.varhol@telecom-paris.fr>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since size_to_prdtl() is only used within ahci.c,
declare it statically. This removes the last use
of "inlined function with external linkage". See
previous commit and commit 9de9fa5cf2 for rationale.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240326171009.26696-4-philmd@linaro.org>
In qvirtqueue_kick(), the 'flags' were previously being incorrectly read from
vq->avail instead of the correct vq->used location. This update ensures 'flags'
are read from the correct location as per the virtio standard.
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240320090442.267525-1-zheyuma97@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a RISC-V 'virt' machine to the graph. This implementation is a
modified copy of the existing arm machine in arm-virt-machine.c
It contains a virtio-mmio and a generic-pcihost controller. The
generic-pcihost controller hardcodes assumptions from the ARM 'virt'
machine, like ecam and pio_base addresses, so we'll add an extra step to
set its parameters after creating it.
Our command line is incremented with 'aclint' parameters to allow the
machine to run MSI tests.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240217192607.32565-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We "fixed" a bug with LTO builds with 100c459f19 (tests/qtest: bump
up QOS_PATH_MAX_ELEMENT_SIZE) but it seems it has triggered again.
The array is sized according to the maximum anticipated length of a
path on the graph. However, the worst case for a depth-first search is
to push all nodes on the graph. So it's not really LTO, it depends on
the ordering of the constructors.
Lets be more assertive raising QOS_PATH_MAX_ELEMENT_SIZE to make it go
away again.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1186 (again)
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-2-alex.bennee@linaro.org>
In qvring_init() we're writing vq->used->avail_event at "vq->used + 2 +
array_size". The struct pointed by vq->used is, from virtio_ring.h
Linux header):
* // A ring of used descriptor heads with free-running index.
* __virtio16 used_flags;
* __virtio16 used_idx;
* struct vring_used_elem used[num];
* __virtio16 avail_event_idx;
So 'flags' is the word right at vq->used. 'idx' is vq->used + 2. We need
to skip 'used_idx' by adding + 2 bytes, and then sum the vector size, to
reach avail_event_idx. An example on how to properly access this field
can be found in qvirtqueue_kick():
avail_event = qvirtio_readw(d, qts, vq->used + 4 +
sizeof(struct vring_used_elem) * vq->size);
This error was detected when enabling the RISC-V 'virt' libqos machine.
The 'idx' test from vhost-user-blk-test.c errors out with a timeout in
qvirtio_wait_used_elem(). The timeout happens because when processing
the first element, 'avail_event' is read in qvirtqueue_kick() as non-zero
because we didn't initialize it properly (and the memory at that point
happened to be non-zero). 'idx' is 0.
All of this makes this condition fail because "idx - avail_event" will
overflow and be non-zero:
/* < 1 because we add elements to avail queue one by one */
if ((flags & VRING_USED_F_NO_NOTIFY) == 0 &&
(!vq->event || (uint16_t)(idx-avail_event) < 1)) {
d->bus->virtqueue_kick(d, vq);
}
As a result the virtqueue is never kicked and we'll timeout waiting for it.
Fixes: 1053587c3f ("libqos: Added EVENT_IDX support")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240217192607.32565-3-dbarboza@ventanamicro.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The loop isn't setting the values for the last element. Every other
element is being initialized with addr = 0, flags = VRING_DESC_F_NEXT
and next = i + 1. The last elem is never touched.
This became a problem when enabling a RISC-V 'virt' libqos machine in
the 'indirect' test of virti-blk-test.c. The 'flags' for the last
element will end up being an odd number (since we didn't touch it).
Being an odd number it will be mistaken by VRING_DESC_F_NEXT, which
happens to be 1.
Deep into hw/virt/virtio.c, in virtqueue_split_pop(), into
virtqueue_split_read_next_desc(), a check for VRING_DESC_F_NEXT will be
made to see if we're supposed to chain. The code will keep up chaining
in the last element because the uninitialized value happens to be odd.
We'll error out right after that because desc->next (which is also
uninitialized) will be >= max. A VIRTQUEUE_READ_DESC_ERROR will be
returned, with an error message like this in the stderr:
qemu-system-riscv64: Desc next is 49391
Since we never returned, we'll end up timing out at qvirtio_wait_used_elem():
ERROR:../tests/qtest/libqos/virtio.c:236:qvirtio_wait_used_elem:
assertion failed: (g_get_monotonic_time() - start_time <= timeout_us)
The root cause is using uninitialized values from guest_alloc() in
qvring_indirect_desc_setup(). There's no guarantee that the memory pages
retrieved will be zeroed, so we can't make assumptions. In fact, commit
5b4f72f5e8 ("tests/qtest: properly initialise the vring used idx") fixed a
similar problem stating "It is probably not wise to assume guest memory
is zeroed anyway". I concur.
Initialize all elems in qvring_indirect_desc_setup().
Fixes: f294b029aa ("libqos: Added indirect descriptor support to virtio implementation")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240217192607.32565-2-dbarboza@ventanamicro.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Refactoring is done in preparation for support of multiple advanced
descriptors RX modes, especially packet-split modes.
Signed-off-by: Tomasz Dzieciol <t.dzieciol@partner.samsung.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
with some rewording in
tests/qemu-iotests/298
tests/qtest/fuzz/generic_fuzz.c
tests/unit/test-throttle.c
as suggested by Eric.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>
For NCQ, PxCI is cleared on command queued successfully.
For non-NCQ, PxCI is cleared on command completed successfully.
Successfully means ERR_STAT, BUSY and DRQ are all cleared.
A command that has ERR_STAT set, does not get to clear PxCI.
See AHCI 1.3.1, section 5.3.8, states RegFIS:Entry and RegFIS:ClearCI,
and 5.3.16.5 ERR:FatalTaskfile.
In the case of non-NCQ commands, not clearing PxCI is needed in order
for host software to be able to see which command slot that failed.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Message-id: 20230609140844.202795-7-nks@flawful.org
Signed-off-by: John Snow <jsnow@redhat.com>
vhost-user-gpu: edid
vhost-user-scmi device
vhost-vdpa: _F_CTRL_RX and _F_CTRL_RX_EXTRA support for svq
cleanups, fixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmSsjYMPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp2vYH/20u6TAMssE/UAJoUU0ypbJkbHjDqiqDeuZN
qDYazLUWIJTUbDnSfXAiRcdJuukEpEFcoHa9O6vgFE/SNod51IrvsJR9CbZxNmk6
D+Px9dkMckDE/yb8f6hhcHsi7/1v04I0oSXmJTVYxWSKQhD4Km6x8Larqsh0u4yd
n6laZ+VK5H8sk6QvI5vMz+lYavACQVryiWV/GAigP21B0eQK79I5/N6y0q8/axD5
cpeTzUF+m33SfLfyd7PPmibCQFYrHDwosynSnr3qnKusPRJt2FzWkzOiZgbtgE2L
UQ/S4sYTBy8dZJMc0wTywbs1bSwzNrkQ+uS0v74z9wCUYTgvQTA=
=RsOh
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
pc,pci,virtio: cleanups, fixes, features
vhost-user-gpu: edid
vhost-user-scmi device
vhost-vdpa: _F_CTRL_RX and _F_CTRL_RX_EXTRA support for svq
cleanups, fixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmSsjYMPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp2vYH/20u6TAMssE/UAJoUU0ypbJkbHjDqiqDeuZN
# qDYazLUWIJTUbDnSfXAiRcdJuukEpEFcoHa9O6vgFE/SNod51IrvsJR9CbZxNmk6
# D+Px9dkMckDE/yb8f6hhcHsi7/1v04I0oSXmJTVYxWSKQhD4Km6x8Larqsh0u4yd
# n6laZ+VK5H8sk6QvI5vMz+lYavACQVryiWV/GAigP21B0eQK79I5/N6y0q8/axD5
# cpeTzUF+m33SfLfyd7PPmibCQFYrHDwosynSnr3qnKusPRJt2FzWkzOiZgbtgE2L
# UQ/S4sYTBy8dZJMc0wTywbs1bSwzNrkQ+uS0v74z9wCUYTgvQTA=
# =RsOh
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 11 Jul 2023 12:00:19 AM BST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (66 commits)
vdpa: Allow VIRTIO_NET_F_CTRL_RX_EXTRA in SVQ
vdpa: Restore packet receive filtering state relative with _F_CTRL_RX_EXTRA feature
vdpa: Allow VIRTIO_NET_F_CTRL_RX in SVQ
vdpa: Avoid forwarding large CVQ command failures
vdpa: Accessing CVQ header through its structure
vhost: Fix false positive out-of-bounds
vdpa: Restore packet receive filtering state relative with _F_CTRL_RX feature
vdpa: Restore MAC address filtering state
vdpa: Use iovec for vhost_vdpa_net_load_cmd()
pcie: Specify 0 for ARI next function numbers
pcie: Use common ARI next function number
include/hw/virtio: document some more usage of notifiers
include/hw/virtio: add kerneldoc for virtio_init
include/hw/virtio: document virtio_notify_config
hw/virtio: fix typo in VIRTIO_CONFIG_IRQ_IDX comments
include/hw: document the device_class_set_parent_* fns
include: attempt to document device_class_set_props
vdpa: Fix possible use-after-free for VirtQueueElement
pcie: Add hotplug detect state register to cmask
virtio-iommu: Rework the traces in virtio_iommu_set_page_size_mask()
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We don't have a virtio-scmi implementation in QEMU and only support a
vhost-user backend. This is very similar to virtio-gpio and we add the same
set of tests, just passing some vhost-user messages over the control socket.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230628100524.342666-4-mzamazal@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
These two functions can be useful for other qtests beside the
qos-test, too, so move them to libqtest instead.
Message-Id: <20230704071655.75381-3-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
GPIE.Multiple_MSIX is not set by default, and needs to be set to get
interrupts from multiple MSI-X vectors.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Free allocated directory entries in v9fs_rreaddir() if argument
`entries` was passed as NULL, to avoid a memory leak. It is
explicitly allowed by design for `entries` to be NULL. [1]
[1] https://lore.kernel.org/all/1690923.g4PEXVpXuU@silver
Reported-by: Coverity (CID 1487558)
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <E1psh5T-0002XN-1C@lizzy.crudebyte.com>
This change is derived from qtest for e1000e device.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Acked-by: Thomas Huth <thuth@redhat.com>
[Jason: make qtest work for win32 (only hotplug)]
Signed-off-by: Jason Wang <jasowang@redhat.com>
They will be useful for igb testing.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
e1000e understands ethernet header so fabricate something convincing.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The register definitions in tests/qtest/libqos/e1000e.h had names
different from hw/net/e1000_regs.h, which made it hard to understand
what test codes corresponds to the implementation. Use
hw/net/e1000_regs.h from tests/qtest/libqos/e1000e.c to remove
these duplications.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230114035919.35251-20-akihiko.odaki@daynix.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
igb implementation first starts off by copying e1000e code. Correct the
code style before that.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230114035919.35251-19-akihiko.odaki@daynix.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20221219130205.687815-6-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
