The vring call fd is set even when the guest does not use MSI-X (e.g., in the
case of virtio PMD), leading to unnecessary CPU overhead for processing
interrupts.
The commit 96a3d98d2c("vhost: don't set vring call if no vector") optimized the
case where MSI-X is enabled but the queue vector is unset. However, there's an
additional case where the guest uses INTx and the INTx_DISABLED bit in the PCI
config is set, meaning that no interrupt notifier will actually be used.
In such cases, the vring call fd should also be cleared to avoid redundant
interrupt handling.
Fixes: 96a3d98d2c("vhost: don't set vring call if no vector")
Reported-by: Zhiyuan Yuan <yuanzhiyuan@chinatelecom.cn>
Signed-off-by: Jidong Xia <xiajd@chinatelecom.cn>
Signed-off-by: Huaitong Han <hanht2@chinatelecom.cn>
Message-Id: <20250522100548.212740-1-hanht2@chinatelecom.cn>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A device can send a PRI request to the IOMMU using pci_pri_request_page.
The PRI response is sent back using the notifier managed with
pci_pri_register_notifier and pci_pri_unregister_notifier.
Signed-off-by: Clement Mathieu--Drif <clement.mathieu--drif@eviden.com>
Co-authored-by: Ethan Milon <ethan.milon@eviden.com>
Message-Id: <20250520071823.764266-12-clement.mathieu--drif@eviden.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Devices implementing ATS can send translation requests using
pci_ats_request_translation. The invalidation events are sent
back to the device using the iommu notifier managed with
pci_iommu_register_iotlb_notifier / pci_iommu_unregister_iotlb_notifier.
Signed-off-by: Clement Mathieu--Drif <clement.mathieu--drif@eviden.com>
Co-authored-by: Ethan Milon <ethan.milon@eviden.com>
Message-Id: <20250520071823.764266-11-clement.mathieu--drif@eviden.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is meant to be used by ATS-capable devices.
Signed-off-by: Clement Mathieu--Drif <clement.mathieu--drif@eviden.com>
Message-Id: <20250520071823.764266-10-clement.mathieu--drif@eviden.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This kind of information is needed by devices implementing ATS in order
to initialize their translation cache.
Signed-off-by: Clement Mathieu--Drif <clement.mathieu--drif@eviden.com>
Message-Id: <20250520071823.764266-8-clement.mathieu--drif@eviden.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The cached is_master value is necessary to know if a device is
allowed to issue ATS/PRI requests or not as these operations do not go
through the master_enable memory region.
Signed-off-by: Clement Mathieu--Drif <clement.mathieu--drif@eviden.com>
Message-Id: <20250520071823.764266-7-clement.mathieu--drif@eviden.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pri_enabled can be used to check whether the capability is present and
enabled on a PCIe device
Signed-off-by: Clement Mathieu--Drif <clement.mathieu--drif@eviden.com>
Message-Id: <20250520071823.764266-6-clement.mathieu--drif@eviden.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Clement Mathieu--Drif <clement.mathieu--drif@eviden.com>
Message-Id: <20250520071823.764266-5-clement.mathieu--drif@eviden.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
ats_enabled checks whether the capability is
present or not. If so, we read the configuration space to get
the status of the feature (enabled or not).
Signed-off-by: Clement Mathieu--Drif <clement.mathieu--drif@eviden.com>
Message-Id: <20250520071823.764266-4-clement.mathieu--drif@eviden.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pasid_enabled checks whether the capability is
present or not. If so, we read the configuration space to get
the status of the feature (enabled or not).
Signed-off-by: Clement Mathieu--Drif <clement.mathieu--drif@eviden.com>
Message-Id: <20250520071823.764266-3-clement.mathieu--drif@eviden.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Clement Mathieu--Drif <clement.mathieu--drif@eviden.com>
Message-Id: <20250520071823.764266-2-clement.mathieu--drif@eviden.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pci_host_data_be_ops became unused after endianness fixes
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Rakesh Jeyasingh <rakeshjb010@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20250429170354.150581-3-rakeshjb010@gmail.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vhost-scsi now supports scsi hotplug
cxl gained a bag of new operations, motably media operations
virtio-net now supports SR-IOV emulation
pci-testdev now supports backing memory bar with host memory
amd iommu now supports migration
fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCgAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmgkg0UPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpcDIH+wbrq7DzG+BVOraYtmD69BQCzYszby1mAWry
2OUYuAx9Oh+DsAwbzwbBdh9+SmJoi1oJ/d8rzSK328hdDrpCaPmc7bcBdAWJ3YcB
bGNPyJ+9eJLRXtlceGIhfAOMLIB0ugXGkHLQ61zlVCTg4Xwnj7/dQp2tAQ1BkTwW
Azc7ujBoJOBF3WVpa1Pqw0t1m3K74bwanOlkIg/JUWXk27sgP2YMnyrcpOu9Iz1T
VazgobyHo5y15V0wvd05w4Bk7cJSHwgW+y3DtgTtIffetIaAbSRgl3Pl5Ic1yKcX
ofg9aDFN6m0S8tv4WgFc+rT3Xaa/aPue9awjD5sEEldRasWKKNo=
=847R
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pci,pc: fixes, features
vhost-scsi now supports scsi hotplug
cxl gained a bag of new operations, motably media operations
virtio-net now supports SR-IOV emulation
pci-testdev now supports backing memory bar with host memory
amd iommu now supports migration
fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCgAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmgkg0UPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpcDIH+wbrq7DzG+BVOraYtmD69BQCzYszby1mAWry
# 2OUYuAx9Oh+DsAwbzwbBdh9+SmJoi1oJ/d8rzSK328hdDrpCaPmc7bcBdAWJ3YcB
# bGNPyJ+9eJLRXtlceGIhfAOMLIB0ugXGkHLQ61zlVCTg4Xwnj7/dQp2tAQ1BkTwW
# Azc7ujBoJOBF3WVpa1Pqw0t1m3K74bwanOlkIg/JUWXk27sgP2YMnyrcpOu9Iz1T
# VazgobyHo5y15V0wvd05w4Bk7cJSHwgW+y3DtgTtIffetIaAbSRgl3Pl5Ic1yKcX
# ofg9aDFN6m0S8tv4WgFc+rT3Xaa/aPue9awjD5sEEldRasWKKNo=
# =847R
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 14 May 2025 07:49:25 EDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (27 commits)
hw/i386/amd_iommu: Allow migration when explicitly create the AMDVI-PCI device
hw/i386/amd_iommu: Isolate AMDVI-PCI from amd-iommu device to allow full control over the PCI device creation
intel_iommu: Take locks when looking for and creating address spaces
intel_iommu: Use BQL_LOCK_GUARD to manage cleanup automatically
virtio: Move virtio_reset()
virtio: Call set_features during reset
vhost-scsi: support VIRTIO_SCSI_F_HOTPLUG
vhost-user: return failure if backend crash when live migration
vhost: return failure if stop virtqueue failed in vhost_dev_stop
system/runstate: add VM state change cb with return value
pci-testdev.c: Add membar-backed option for backing membar
pcie_sriov: Make a PCI device with user-created VF ARI-capable
docs: Document composable SR-IOV device
virtio-net: Implement SR-IOV VF
virtio-pci: Implement SR-IOV PF
pcie_sriov: Allow user to create SR-IOV device
pcie_sriov: Check PCI Express for SR-IOV PF
pcie_sriov: Ensure PF and VF are mutually exclusive
hw/pci: Fix SR-IOV VF number calculation
hw/pci: Do not add ROM BAR for SR-IOV VF
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A user can create a SR-IOV device by specifying the PF with the
sriov-pf property of the VFs. The VFs must be added before the PF.
A user-creatable VF must have PCIDeviceClass::sriov_vf_user_creatable
set. Such a VF cannot refer to the PF because it is created before the
PF.
A PF that user-creatable VFs can be attached calls
pcie_sriov_pf_init_from_user_created_vfs() during realization and
pcie_sriov_pf_exit() when exiting.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20250314-sriov-v9-5-57dae8ae3ab5@daynix.com>
Tested-by: Yui Washizu <yui.washidu@gmail.com>
Tested-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A device cannot be a SR-IOV PF and a VF at the same time.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20250314-sriov-v9-3-57dae8ae3ab5@daynix.com>
Tested-by: Yui Washizu <yui.washidu@gmail.com>
Tested-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pci_config_get_bar_addr() had a division by vf_stride. vf_stride needs
to be non-zero when there are multiple VFs, but the specification does
not prohibit to make it zero when there is only one VF.
Do not perform the division for the first VF to avoid division by zero.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20250314-sriov-v9-2-57dae8ae3ab5@daynix.com>
Tested-by: Yui Washizu <yui.washidu@gmail.com>
Tested-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A SR-IOV VF cannot have a ROM BAR.
Co-developed-by: Yui Washizu <yui.washidu@gmail.com>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20250314-sriov-v9-1-57dae8ae3ab5@daynix.com>
Tested-by: Yui Washizu <yui.washidu@gmail.com>
Tested-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Remove PCI_DPRINTF() macro and use trace events instead.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Mechanical change using gsed, then style manually adapted
to pass checkpatch.pl script.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250424194905.82506-4-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250424194905.82506-3-philmd@linaro.org>
PropertyInfo member @name becomes ObjectProperty member @type, while
Property member @name becomes ObjectProperty member @name. Rename the
former.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20250227085601.4140852-4-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[One missed instance of @type fixed]
The memory and IO BARs for devices are only accessible in the D0 power
state. In other power states the PCI spec defines that the device
responds to TLPs and messages with an Unsupported Request response.
To approximate this behavior, consider the BARs as unmapped when the
device is not in the D0 power state. This makes the BARs inaccessible
and has the additional bonus for vfio-pci that we don't attempt to DMA
map BARs for devices in a non-D0 power state.
To support this, an interface is added for devices to register the PM
capability, which allows central tracking to enforce valid transitions
and unmap BARs in non-D0 states.
NB. We currently have device models (eepro100 and pcie_pci_bridge)
that register a PM capability but do not set wmask to enable writes to
the power state field. In order to maintain migration compatibility,
this new helper does not manage the wmask to enable guest writes to
initiate a power state change. The contents and write access of the
PM capability are still managed by the caller.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250225215237.3314011-2-alex.williamson@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Features:
SR-IOV emulation for pci
virtio-mem-pci support for s390
interleave support for cxl
big endian support for vdpa svq
new QAPI events for vhost-user
Also vIOMMU reset order fixups are in.
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAme4b8sPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpHKcIAKPJsVqPdda2dJ7b7FdyRT0Q+uwezXqaGHd4
7Lzih1wsxYNkwIAyPtEb76/21qiS7BluqlUCfCB66R9xWjP5/KfvAFj4/r4AEduE
fxAgYzotNpv55zcRbcflMyvQ42WGiZZHC+o5Lp7vDXUP3pIyHrl0Ydh5WmcD+hwS
BjXvda58TirQpPJ7rUL+sSfLih17zQkkDcfv5/AgorDy1wK09RBKwMx/gq7wG8yJ
twy8eBY2CmfmFD7eTM+EKqBD2T0kwLEeLfS/F/tl5Fyg6lAiYgYtCbGLpAmWErsg
XZvfZmwqL7CNzWexGvPFnnLyqwC33WUP0k0kT88Y5wh3/h98blw=
=tej8
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: features, fixes, cleanups
Features:
SR-IOV emulation for pci
virtio-mem-pci support for s390
interleave support for cxl
big endian support for vdpa svq
new QAPI events for vhost-user
Also vIOMMU reset order fixups are in.
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAme4b8sPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpHKcIAKPJsVqPdda2dJ7b7FdyRT0Q+uwezXqaGHd4
# 7Lzih1wsxYNkwIAyPtEb76/21qiS7BluqlUCfCB66R9xWjP5/KfvAFj4/r4AEduE
# fxAgYzotNpv55zcRbcflMyvQ42WGiZZHC+o5Lp7vDXUP3pIyHrl0Ydh5WmcD+hwS
# BjXvda58TirQpPJ7rUL+sSfLih17zQkkDcfv5/AgorDy1wK09RBKwMx/gq7wG8yJ
# twy8eBY2CmfmFD7eTM+EKqBD2T0kwLEeLfS/F/tl5Fyg6lAiYgYtCbGLpAmWErsg
# XZvfZmwqL7CNzWexGvPFnnLyqwC33WUP0k0kT88Y5wh3/h98blw=
# =tej8
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 21 Feb 2025 20:21:31 HKT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (41 commits)
docs/devel/reset: Document reset expectations for DMA and IOMMU
hw/vfio/common: Add a trace point in vfio_reset_handler
hw/arm/smmuv3: Move reset to exit phase
hw/i386/intel-iommu: Migrate to 3-phase reset
hw/virtio/virtio-iommu: Migrate to 3-phase reset
vhost-user-snd: correct the calculation of config_size
net: vhost-user: add QAPI events to report connection state
hw/virtio/virtio-nsm: Respond with correct length
vdpa: Fix endian bugs in shadow virtqueue
MAINTAINERS: add more files to `vhost`
cryptodev/vhost: allocate CryptoDevBackendVhost using g_mem0()
vhost-iova-tree: Update documentation
vhost-iova-tree, svq: Implement GPA->IOVA & partial IOVA->HVA trees
vhost-iova-tree: Implement an IOVA-only tree
amd_iommu: Use correct bitmask to set capability BAR
amd_iommu: Use correct DTE field for interrupt passthrough
hw/virtio: reset virtio balloon stats on machine reset
mem/cxl_type3: support 3, 6, 12 and 16 interleave ways
hw/mem/cxl_type3: Ensure errp is set on realization failure
hw/mem/cxl_type3: Fix special_ops memory leak on msix_init_exclusive_bar() failure
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Nothing should be doing this, but it doesn't get caught by
pci_register_bar(). Add an assertion to prevent misuse.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20250117172842.406338-3-npiggin@gmail.com>
Reviewed-by: Phil Dennis-Jordan <phil@philjordan.eu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Of the MSI-X PBA pending bits, the PCI Local Bus Specification says:
Software should never write, and should only read
Pending Bits. If software writes to Pending Bits, the
result is undefined.
Log a GUEST_ERROR message if the PBA is written to by software.
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Dmitry Fleytman <dmitry.fleytman@gmail.com>
Cc: Sriram Yagnaraman <sriram.yagnaraman@ericsson.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20250117172842.406338-2-npiggin@gmail.com>
Reviewed-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pcie_sriov doesn't have code to restore its state after migration, but
igb, which uses pcie_sriov, naively claimed its migration capability.
Add code to register VFs after migration and fix igb migration.
Fixes: 3a977deebe ("Intrdocue igb device emulation")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20250116-reuse-v20-11-7cb370606368@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
num_vfs is not migrated so use PCI_SRIOV_CTRL_VFE and PCI_SRIOV_NUM_VF
instead.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20250116-reuse-v20-10-7cb370606368@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Release VFs failed to realize just as we do in unregister_vfs().
Fixes: 7c0fa8dff8 ("pcie: Add support for Single Root I/O Virtualization (SR/IOV)")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20250116-reuse-v20-9-7cb370606368@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Disable SR-IOV VF devices by reusing code to power down PCI devices
instead of removing them when the guest requests to disable VFs. This
allows to realize devices and report VF realization errors at PF
realization time.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20250116-reuse-v20-8-7cb370606368@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pci_new() aborts when creating a VF with addr >= PCI_DEVFN_MAX.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20250116-reuse-v20-7-7cb370606368@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A device gets automatically unrealized when being unparented.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20250116-reuse-v20-6-7cb370606368@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The general expectation is that header files should follow the same
file/path naming scheme as the corresponding source file. There are
various historical exceptions to this practice in QEMU, with one of
the most notable being the include/qapi/qmp/ directory. Most of the
headers there correspond to source files in qobject/.
This patch corrects most of that inconsistency by creating
include/qobject/ and moving the headers for qobject/ there.
This also fixes MAINTAINERS for include/qapi/qmp/dispatch.h:
scripts/get_maintainer.pl now reports "QAPI" instead of "No
maintainers found".
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com> #s390x
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20241118151235.2665921-2-armbru@redhat.com>
[Rebased]
The end vector calculation has a bug that results in polling fewer
than required vectors when reading at a non-zero offset in PBA memory.
Fixes: bbef882cc1 ("msi: add API to get notified about pending bit poll")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20241212120402.1475053-1-npiggin@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PCI hotplug for downstream endpoints on arm fails because Linux'
PCIe hotplug driver doesn't like the QEMU provided LNKSTA:
pcieport 0000:08:01.0: pciehp: Slot(2): Card present
pcieport 0000:08:01.0: pciehp: Slot(2): Link Up
pcieport 0000:08:01.0: pciehp: Slot(2): Cannot train link: status 0x2000
There's 2 cases where LNKSTA isn't setup properly:
* the downstream device has no express capability
* max link width of the bridge is 0
Move the sanity checks added via 88c869198a
("pci: Sanity test minimum downstream LNKSTA") outside of the
branch to make sure downstream ports always have a valid LNKSTA.
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Tested-by: Zhenyu Zhang <zhenyzha@redhat.com>
Message-Id: <20241203121928.14861-1-sebott@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The renamed state will not only represent powering state of PFs, but
also represent SR-IOV VF enablement in the future.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250109-reuse-v19-1-f541e82ca5f7@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
vfio_pci_size_rom() distinguishes whether rombar is explicitly set to 1
by checking dev->opts, bypassing the QOM property infrastructure.
Use -1 as the default value for rombar to tell if the user explicitly
set it to 1. The property is also converted from unsigned to signed.
-1 is signed so it is safe to give it a new meaning. The values in
[2 ^ 31, 2 ^ 32) become invalid, but nobody should have typed these
values by chance.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250104-reuse-v18-13-c349eafd8673@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Headers in include/sysemu/ are not only related to system
*emulation*, they are also used by virtualization. Rename
as system/ which is clearer.
Files renamed manually then mechanical change using sed tool.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Message-Id: <20241203172445.28576-1-philmd@linaro.org>
Now that all of the Property arrays are counted, we can remove
the terminator object from each array. Update the assertions
in device_class_set_props to match.
With struct Property being 88 bytes, this was a rather large
form of terminator. Saves 30k from qemu-system-aarch64.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Link: https://lore.kernel.org/r/20241218134251.4724-21-richard.henderson@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
pci_bus_add_fw_cfg_extra_pci_roots() calls the fw_cfg
API with PCI bus specific arguments.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20241206181352.6836-5-philmd@linaro.org>
The FW_CFG_DATA_GENERATOR interface allows any object to
produce a blob of data consumable by the fw_cfg device.
Implement that for PCI bus objects.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20241213133352.10915-5-philmd@linaro.org>
