Currently every board that uses the PL011 duplicates the logic that
selects the Rust implementation if Rust was enabled and the C
implementation if it does not. Factor this out into a separate
Kconfig stanza, so that boards can go back to simply doing "select
PL011" and get whichever implementation is correct for the build.
This fixes a compilation failure if CONFIG_VMAPPLE is enabled
in a Rust build, because hw/vmapple/Kconfig didn't have the
"pick the Rust PL011 if Rust is enabled" logic in it.
Fixes: 59f4d65584 ("hw/vmapple/vmapple: Add vmapple machine type")
Reported-by: Tanish Desai <tanishdesai37@gmail.com>
Analyzed-by: Tanish Desai <tanishdesai37@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20250319193110.1565578-2-peter.maydell@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Diva GSP ("Guardian Service Processor") PCI boards are Remote
Management cards for PA-RISC machines. They come with built-in 16550A
UARTs for serial consoles and modem functionalities, as well as a
mailbox-like memory area for hardware auto-reboot functionality.
Latest generation HP PA-RISC server machines use those Diva cards
for console output.
Signed-off-by: Helge Deller <deller@gmx.de>
Split IPACK Kconfig key as {IPACK, TPCI200, IP_OCTAL_232}
- IPack is a bus
- TPCI200 is a PCI device providing an IPack bus
- IP-Octal232 is an IPack device plugged on an IPack bus
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Fabiano Rosas <farosas@suse.de>
Message-Id: <20250121155526.29982-3-philmd@linaro.org>
hw/char/serial currently contains the implementation of both TYPE_SERIAL and
TYPE_SERIAL_MM. According to serial_class_init(), TYPE_SERIAL is an internal
class while TYPE_SERIAL_MM is used by numerous machine types directly. Let's
move the latter into its own module which makes the dependencies more obvious
and the code more tidy.
The includes and the dependencies have been converted mechanically except in the
hw/char directories which were updated manually. The result was compile-tested.
Now, only hw/char makes direct use of TYPE_SERIAL:
# grep -r -e "select SERIAL" | grep -v SERIAL_
hw/char/Kconfig: select SERIAL
hw/char/Kconfig: select SERIAL
hw/char/Kconfig: select SERIAL
hw/char/Kconfig: select SERIAL
hw/char/Kconfig: select SERIAL
# grep -r -e "/serial\\.h"
include/hw/char/serial-mm.h:#include "hw/char/serial.h"
hw/char/serial-pci-multi.c:#include "hw/char/serial.h"
hw/char/serial.c:#include "hw/char/serial.h"
hw/char/serial-isa.c:#include "hw/char/serial.h"
hw/char/serial-pci.c:#include "hw/char/serial.h"
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Link: https://lore.kernel.org/r/20240905073832.16222-4-shentey@gmail.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We just removed the single machine using it (axis-dev88).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-ID: <20240904143603.52934-9-philmd@linaro.org>
Add the basic infrastructure (register read/write, type...)
to implement the STM32L4x5 USART.
Also create different types for the USART, UART and LPUART
of the STM32L4x5 to deduplicate code and enable the
implementation of different behaviors depending on the type.
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240329174402.60382-2-arnaud.minier@telecom-paris.fr
[PMM: update to new reset hold method signature;
fixed a few checkpatch nits]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We use the user_ss[] array to hold the user emulation sources,
and the softmmu_ss[] array to hold the system emulation ones.
Hold the latter in the 'system_ss[]' array for parity with user
emulation.
Mechanical change doing:
$ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-10-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The code for these two devices seems to be independent from any
target specific macros. "riscv_htif.c" is used for both, riscv32 and
riscv64, so by moving this to the common code source set, we can
avoid to compile it twice every time.
"goldfish_tty.c" is only used for one target at the moment, but
since it is a paravirtualized device, it could get useful for other
targets one day, so let's move it now, too.
Message-Id: <20230411173206.1511621-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Now that we have the redirectable Xen backend operations we can build the
PV backends even without the Xen libraries.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Use a dedicated UART config(CONFIG_SHAKTI_UART) to select
shakti uart.
Signed-off-by: Vijai Kumar K <vijai@behindbytes.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210731190229.137483-1-vijai@behindbytes.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Target lm32 was deprecated in commit d849800512, v5.2.0. See there
for rationale.
Some of its code lives on in device models derived from milkymist
ones: hw/char/digic-uart.c and hw/display/bcm2835_fb.c.
Cc: Michael Walle <michael@walle.cc>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210503084034.3804963-2-armbru@redhat.com>
Acked-by: Michael Walle <michael@walle.cc>
[Trivial conflicts resolved, reST markup fixed]
This is the initial implementation of Shakti UART.
Signed-off-by: Vijai Kumar K <vijai@behindbytes.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210401181457.73039-4-vijai@behindbytes.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We want to be able to use the 'LM32' config for architecture
specific features. As CONFIG_LM32 is only used to select
peripherals, rename it CONFIG_LM32_DEVICES.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210221225626.2589247-3-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We want to be able to use the 'SH4' config for architecture
specific features. Add more fine-grained selection by adding
a CONFIG_SH_SCI selector for the SH4 serial controller.
Add the missing MAINTAINERS entries.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210222141514.2646278-5-f4bug@amsat.org>
This is an effort to clean up the hw/riscv directory. Ideally it
should only contain the RISC-V SoC / machine codes plus generic
codes. Let's move sifive_uart model to hw/char directory.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <1599129623-68957-9-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This is an effort to clean up the hw/riscv directory. Ideally it
should only contain the RISC-V SoC / machine codes plus generic
codes. Let's move riscv_htif model to hw/char directory.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <1599129623-68957-8-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Microchip PolarFire SoC MMUART is ns16550 compatible, with some
additional registers. Create a simple MMUART model built on top
of the existing ns16550 model.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <1598924352-89526-6-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
