We don't use the term "integration tests" for these kind of tests
anymore, it's "functional tests" nowadays.
Suggested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-ID: <20250318061420.20378-1-thuth@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
To avoid problems with the meson installation from the host
system, we should always use the meson from our venv instead.
Thus use this in the documentation, too.
While we're at it, also mention that it has to be run from
the build folder (in the igb.rst file; the other two files
were already fine).
Suggested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-ID: <20250318055415.16501-1-thuth@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This also creates the `qapi-qsd-index` and `qapi-qga-index` QMP indices.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250313044312.189276-12-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Before we enable the QGA and QSD namespaces, we need to disambiguate
some of the references that would become ambiguous as a result!
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250313044312.189276-11-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This also creates the qapi-qmp-index.html index and cross-reference
target.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250313044312.189276-10-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Generate an index-per-namespace for the QAPI domain. Due to a limitation
with Sphinx's architecture, these indices must be defined during setup
time and cannot be dynamically created on-demand when a namespace
directive is encountered.
Owing to that limitation, add a configuration value to conf.py that
specifies which QAPI namespaces we'll generate indices for.
Indices will be named after their namespace, e.g. the "QMP" namespace
will generate to "qapi-qmp-index.html" and can be referenced using
`qapi-qmp-index`.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250313044312.189276-9-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This patch does three things:
1. Record the current namespace context in pending_xrefs so it can be
used for link resolution later,
2. Pass that recorded namespace context to find_obj() when resolving a
reference, and
3. Wildly and completely rewrite find_obj().
cross-reference support is expanded to tolerate the presence or absence
of either namespace or module, and to cope with the presence or absence
of contextual information for either.
References now work like this:
1. If the explicit reference target is recorded in the domain's object
registry, we link to that target and stop looking. We do this lookup
regardless of how fully qualified the target is, which allows direct
references to modules (which don't have a module component to their
names) or direct references to definitions that may or may not belong
to a namespace or module.
2. If contextual information is available from qapi:namespace or
qapi:module directives, try using those components to find a direct
match to the implied target name.
3. If both prior lookups fail, generate a series of regular expressions
looking for wildcard matches in order from most to least
specific. Any explicitly provided components (namespace, module)
*must* match exactly, but both contextual and entirely omitted
components are allowed to differ from the search result. Note that if
more than one result is found, Sphinx will emit a warning (a build
error for QEMU) and list all of the candidate references.
The practical upshot is that in the large majority of cases, namespace
and module information is not required when creating simple `references`
to definitions from within the same context -- even when identical
definitions exist in other contexts.
Even when using simple `references` from elsewhere in the QEMU
documentation manual, explicit namespace info is not required if there
is only one definition by that name.
Disambiguation *will* be required from outside of the QAPI documentation
when referencing e.g. block-core definitions, which are shared between
QEMU QMP and the QEMU Storage Daemon. In that case, there are two
options:
A: References can be made partially or fully explicit,
e.g. `QMP:block-dirty-bitmap-add` will link to the QEMU version of
the definition, while `QSD:block-dirty-bitmap-add` would link to the
QSD version.
B: If all of the references in a document are intended to go to the same
place, you can insert a "qapi:namespace:: QMP" directive to influence
the fuzzy-searching for later references.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250313044312.189276-8-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
[Commit message typo fixed]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add a :namespace: option to the qapi-doc directive, which inserts a
qapi:namespace directive into the start of the generated document. This,
in turn, associates all auto-generated definitions by this directive
with the specified namespace.
The source info for these generated lines are credited to the start of
the qapi-doc directive, which isn't precisely correct, but I wasn't sure
how to get it more accurate without some re-parsing shenanigans.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250313044312.189276-7-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add a new directive that marks the beginning of a QAPI "namespace", for
example; "QMP", "QGA" or "QSD". This directive will associate all
subsequent QAPI directives in a document with the specified
namespace. This does not change the visual display of any of the
definitions or index entries, but does change the "Fully Qualified Name"
inside the QAPI domain's object table. This allows for two different
"namespaces" to define entities with otherwise identical names -- which
will come in handy for documenting both QEMU QMP and the QEMU Storage
Daemon.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250313044312.189276-6-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Akin to the :module: override option, the :namespace: options allows you
to forcibly override the contextual namespace associatied with a
definition.
We don't necessarily actually need this, but I felt compelled to stick
close to how the Python domain works that offers context overrides.
As of this commit, it is possible to add e.g. ":namespace: QMP" to any
QAPI directive to forcibly associate that definition with a given
namespace.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250313044312.189276-5-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This patch adds a namespace component to the "Fully Qualified Name", in
the form of "domain:module.name". As there are no namespace directives
or options yet, this component will simply be empty as of this patch.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250313044312.189276-4-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Currently, only the definition name is stored in the tree metadata; but
the node property is confusingly called "fullname". Rectify this by
always storing the FQN in the tree metadata.
... While we're here, re-organize the code in preparation for namespace
support to make it a bit easier to add additional components of the
FQN. With this change, there is now extremely little code left that's
taken directly from the Python domain :)
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250313044312.189276-3-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
When using the annotations feature, type hints do not need to be
imported at runtime, only at type check time. Move type-check-only
imports into a conditional to reduce the number of imports needed at
runtime.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250313044312.189276-2-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The tests have been converted to the functional framework, so
we should not talk about Avocado here anymore.
Fixes: f7d6b77220 ("tests/functional: Convert BananaPi tests to the functional framework")
Fixes: 380f7268b7 ("tests/functional: Convert the OrangePi tests to the functional framework")
Fixes: 4c0a2df81c ("tests/functional: Convert some tests that download files via fetch_asset()")
Message-ID: <20250311160847.388670-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This was missed at the time.
Fixes: 812b31d3f9 ("configs: rename default-configs to configs and reorganise")
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250306174113.427116-1-groug@kaod.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add NVRAM and hint on how to make it persistent. Also update Linux
boot section which should now boot automatically with the new NVRAM
defaults so manual settings in menu may not be needed normally.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <20250304205926.87E364E6010@zero.eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The default PNOR image is erased and not recognised by skiboot, so NVRAM
gets disabled. This change adds a tiny pnor file that is a proper FFS
image with a formatted NVRAM partition. This is recognised by skiboot and
will persist across machine reboots.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The ref405ep machine is scheduled for removal in QEMU 10.0. Keep the
405 CPU implementation for a while because it is theoretically
possible to model the power management (OCC) co-processor found on the
IBM POWER [8-11] processors.
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <20250204080649.836155-4-clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The ref405ep machine is the only PPC 405 machine. Drop all support by
removing the SoC and associated devices as-well as the machine.
Link: https://lore.kernel.org/qemu-devel/20250110141800.1587589-3-clg@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <20250204080649.836155-3-clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Who documents the documentation?
Me, I guess.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250311034303.75779-63-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We are not enabling the transmogrifier for QSD or QGA yet because we
don't (yet) have a way to create separate indices, and all of the
definitions will bleed together, which isn't so nice.
For now, QMP is better than nothing at all!
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250311034303.75779-62-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The next patch will engage the qapidoc transmogrifier, which creates a
lot of cross-reference targets. Some of the existing targets
("migration", "qom", "replay") will become ambiguous as a result. Nail
them down more explicitly to prevent ambiguous cross-reference warnings.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250311034303.75779-61-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Presently, we never have any empty text entries for members. The next
patch will explicitly generate such sections, so enable support for it
in advance.
The parser will generate placeholder sections to indicate undocumented
members, but it's the qapidoc generator that's responsible for deciding
what to do with that stub section.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250311034303.75779-59-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
[Tweak the stub section text]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add "the members of ..." pointers to Members and Arguments lists where
appropriate, with clickable cross-references - so it's a slight
improvement over the old system :)
This patch is meant to be a temporary solution until we can review and
merge the inliner.
The implementation of this patch is a little bit of a hack: Sphinx is
not designed to allow you to mix fields of different "type"; i.e. mixing
member descriptions and free-form text under the same heading. To
accomplish this with a minimum of hackery, we technically document a
"dummy field" and then just strip off the documentation for that dummy
field in a post-processing step. We use the "q_dummy" variable for this
purpose, then strip it back out before final processing. If this
processing step should fail, you'll see warnings for a bad
cross-reference. (So if you don't see any, it must be working!)
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250311034303.75779-58-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add debugging output for the qapidoc transmogrifier - setting DEBUG=1
will produce .ir files (one for each qapidoc directive) that write the
generated rst file to disk to allow for easy debugging and verification
of the generated document.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250311034303.75779-57-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add support for the special QAPI doc syntax to process @references as
``preformatted text``. At the moment, there are no actual
cross-references for individual members, so there is nothing to link
against. For now, process it identically to how we did in the old
qapidoc system.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250311034303.75779-56-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This is the true top-level processor for the new transmogrifier;
responsible both for generating the intermediate rST and then running
the nested parse on that generated document to produce the final
docutils tree that is then - very finally - postprocessed by sphinx for
final rendering to HTML &c.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250311034303.75779-55-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
[Use the opportunity to move the __version__ assignment to where
PEP 8 wants it]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Finally, the core entry method for a qapi entity.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250311034303.75779-54-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Implement the actual main dispatch method that processes and handles the
list of doc sections for a given QAPI entity.
Process doc sections in strict source order. This is good; reordering
doc text is undesirable. Improvement over the old doc generator, which
can reorder doc comments that don't adhere to (largely unspoken)
conventions.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250311034303.75779-53-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
[Commit message extended]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This method is used for generating the "members" of a wide variety of
things, including structs, unions, enums, alternates, etc. The field
name it uses to do so is dependent on the type of entity the "member"
belongs to.
Currently, IF conditionals for individual members are not handled or
rendered, a small regression from the prior documentation
generator. This will be fixed in a future patch.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250311034303.75779-52-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Generates :return: fields for explicit returns statements. Note that
this does not presently handle undocumented returns, which is handled in
a later commit.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250311034303.75779-51-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Prepare to keep a record of which entity we're working on documenting
for the purposes of being able to change certain generative features
conditionally and create stronger assertions.
If you find yourself asking: "Wait, but where does the current entity
actually get recorded?!", you're right! That part comes with the
visit_entity() implementation, which gets added later.
This patch is front-loaded for the sake of type checking in the
forthcoming commits before visit_entity() is ready to be added.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250311034303.75779-50-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This adds a simple ":feat name: lorem ipsum ..." line to the generated
rST document, so at the moment it's only for "top level" features.
Features not attached directly to a QAPI definition are not currently
handled! This is a small regression over the prior documentation
generator that will be addressed in a future patch.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250311034303.75779-49-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
These are simple rST generation methods that assist in getting the types
and formatting correct for a field list entry. add_field() is a more
raw, direct call while generate_field() is intended to be used for
generating the correct field from a member object.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250311034303.75779-48-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This method is responsible for generating a type name for a given member
with the correct annotations for the QAPI domain. Features and enums do
not *have* types, so they return None. Everything else returns the type
name with a "?" suffix if that type is optional, and ensconced in
[brackets] if it's an array type.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250311034303.75779-47-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Notably, this method does not currently address the formatting issues
present with the "errors" section in QAPIDoc and just vomits the text
verbatim into the rST doc, with somewhat inconsistent results.
To be addressed in a future patch.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250311034303.75779-46-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This transforms "formerly known as untagged sections" into our pure
intermediate rST format. These sections are already pure rST, so this
method doesn't do a whole lot except ensure appropriate newlines.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250311034303.75779-45-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This method adds the options/preamble to each definition block. Notably,
:since: and :ifcond: are added, as are any "special features" such as
:deprecated: and :unstable:.
If conditionals, if attached to special features, are currently
unhandled in this patch and will be addressed at a future date. We
currently do not have any if conditionals attached to special features.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250311034303.75779-44-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add the transmogrifier implementation for converting freeform doc blocks
to rST.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250311034303.75779-43-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This method annotates the start of a new module, crediting the source
location to the first line of the module file.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250311034303.75779-41-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add the beginnings of the Transmogrifier class by adding the rST
conversion helpers that will be used to build the virtual rST document.
This version of the class does not actually "do anything" yet; each
individual feature is added one-at-a-time in the forthcoming commits.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250311034303.75779-40-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now that the legacy code is factored out, fix up the typing on the
remaining code in qapidoc.py. Add a type ignore to qapi_legacy.py to
prevent the errors there from bleeding out into qapidoc.py.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250311034303.75779-38-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This is being done primarily to be able to type check and delint the new
implementation without needing to worry about fixing up the old
implementation.
I'm adding the new implementation into the existing file instead of into
a new file so that when the dust settles, qapidoc.py will contain the
full history of development on this generative module.
This patch *should* be pure motion, give or take the import statements.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250311034303.75779-37-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This commit adds a stubbed option to the qapi-doc directive that opts-in
to the new rST generator; the implementation of which will follow in
subsequent commits.
Once all QAPI documents have been converted, this option and the old
qapidoc implementation can be dropped.
Note that moving code outside of the try...except block has no impact
because the code moved outside of that block does not ever raise a
QAPIError.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250311034303.75779-36-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We have several kinds of sections, and to tell them apart, we use
Section attribute @tag and also the section object's Python type:
type @tag
untagged Section None
@foo: ArgSection 'foo'
Returns: Section 'Returns'
Errors: Section 'Errors'
Since: Section 'Since'
TODO: Section 'TODO'
Note:
* @foo can be a member or a feature description, depending on context.
* tag == 'Since' can be a Since: section or a member or feature
description. If it's a Section, it's the former, and if it's an
ArgSection, it's the latter.
Clean this up as follows. Move the member or feature name to new
ArgSection attribute @name, and replace @tag by enum @kind like this:
type kind name
untagged Section PLAIN
@foo: ArgSection MEMBER 'foo' if member or argument
ArgSection FEATURE 'foo' if feature
Returns: Section RETURNS
Errors: Section ERRORS
Since: Section SINCE
TODO: Section TODO
The qapi-schema tests are updated to account for the new section names;
"TODO" becomes "Todo" and `None` becomes "Plain" there.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250311034303.75779-34-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Sphinx 5.3.0 to Sphinx 6.2.0 has a bug where nested content in an
ObjectDescription content block has its error position reported
incorrectly due to an oversight when they added nested section support
to this directive.
(This bug is present in Sphinx's own Python and C domains; test it
yourself by creating a py:func directive and creating a syntax error in
the directive's content block. The reporting will be incorrect.)
To avoid overriding and re-implementing the entirety of the run()
method, a workaround is employed where we parse the content block
ourselves in before_content(), then null the content block to make
Sphinx's own parsing a no-op. Then, in transform_content (which occurs
after Sphinx's nested parse), we simply swap our own parsed content tree
back in for Sphinx's.
It appears a little tricky, but it's the nicest solution I can find.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250311034303.75779-32-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This patch adds a warning (which is a build failure under our current
build settings) whenever a QAPI cross-reference fails to resolve.
This applies to any cross-references of the form :qapi:{role}:`foo`,
which covers all of the automatically generated references by the qapi
domain, and any such references that are manually written into the
documentation rst files.
Cross-references of the form `foo` do not use this system, but are
already configured to issue a warning (Again, a build failure) if the
cross-reference isn't found anywhere.
Adds warnings that look like the following:
docs/qapi/index.rst:48: WARNING: qapi:type reference target not found: 'footype' [ref.qapi]
docs/qapi/index.rst:50: WARNING: qapi:mod reference target not found: 'foomod' [ref.qapi]
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250311034303.75779-31-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Sphinx < 4.1 handles cross-references ... differently. Factor out and
isolate the compatibility goop we need to make cross references work
properly in old versions of Sphinx.
Yes, it's ugly. Yes, it works. No, I don't want to talk about
it.
Understand that this patch exists because of the overflowing love in my
heart.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250311034303.75779-30-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
