0xffff is not an allowed value for NCQR and NSQR in Set Features on
Number of Queues.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Acked-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Message-Id: <20200706061303.246057-14-its@irrelevant.dk>
Since the device does not have any persistent state storage, no
features are "saveable" and setting the Save (SV) field in any Set
Features command will result in a Feature Identifier Not Saveable status
code.
Similarly, if the Select (SEL) field is set to request saved values, the
devices will (as it should) return the default values instead.
Since this also introduces "Supported Capabilities", the nsid field is
now also checked for validity wrt. the feature being get/set'ed.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200706061303.246057-13-its@irrelevant.dk>
If the write cache is disabled with a Set Features command, flush it if
currently enabled.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200706061303.246057-11-its@irrelevant.dk>
The NvmeFeatureVal does not belong with the spec-related data structures
in include/block/nvme.h that is shared between the block-level nvme
driver and the emulated nvme device.
Move it into the nvme device specific header file as it is the only
user of the structure. Also, remove the unused members.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200706061303.246057-10-its@irrelevant.dk>
Add support for the Asynchronous Event Request command. Required for
compliance with NVMe revision 1.3d. See NVM Express 1.3d, Section 5.2
("Asynchronous Event Request command").
Mostly imported from Keith's qemu-nvme tree. Modified with a max number
of queued events (controllable with the aer_max_queued device
parameter). The spec states that the controller *should* retain
events, so we do best effort here.
Signed-off-by: Klaus Jensen <klaus.jensen@cnexlabs.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Acked-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Message-Id: <20200706061303.246057-9-its@irrelevant.dk>
Add support for the Get Log Page command and basic implementations of
the mandatory Error Information, SMART / Health Information and Firmware
Slot Information log pages.
In violation of the specification, the SMART / Health Information log
page does not persist information over the lifetime of the controller
because the device has no place to store such persistent state.
Note that the LPA field in the Identify Controller data structure
intentionally has bit 0 cleared because there is no namespace specific
information in the SMART / Health information log page.
Required for compliance with NVMe revision 1.3d. See NVM Express 1.3d,
Section 5.14 ("Get Log Page command").
Signed-off-by: Klaus Jensen <klaus.jensen@cnexlabs.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Acked-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200706061303.246057-8-its@irrelevant.dk>
Mark firmware slot 1 as read-only and only support that slot.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200706061303.246057-7-its@irrelevant.dk>
It might seem weird to implement this feature for an emulated device,
but it is mandatory to support and the feature is useful for testing
asynchronous event request support, which will be added in a later
patch.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Acked-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Message-Id: <20200706061303.246057-6-its@irrelevant.dk>
Required for compliance with NVMe revision 1.3d. See NVM Express 1.3d,
Section 5.1 ("Abort command").
The Abort command is a best effort command; for now, the device always
fails to abort the given command.
Signed-off-by: Klaus Jensen <klaus.jensen@cnexlabs.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Acked-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Message-Id: <20200706061303.246057-5-its@irrelevant.dk>
Add various additional tracing and streamline nvme_identify_ns and
nvme_identify_nslist (they do not need to repeat the command, it is
already in the trace name).
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200706061303.246057-4-its@irrelevant.dk>
Fix a missing cpu_to conversion by moving conversion to just before
returning instead.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200706061303.246057-3-its@irrelevant.dk>
Add missing fields in the Identify Controller and Identify Namespace
data structures to bring them in line with NVMe v1.3.
This also adds data structures and defines for SGL support which
requires a couple of trivial changes to the nvme block driver as well.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Acked-by: Fam Zheng <fam@euphon.net>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Message-Id: <20200706061303.246057-2-its@irrelevant.dk>
Simplify the NVMe emulated device by aligning the I/O BAR to 4 KiB.
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200630110429.19972-5-philmd@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
At some point the URL changed, update it to avoid other
developers to search for it.
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200630110429.19972-2-philmd@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Add the previously created sbsa-ec device to the sbsa-ref machine in
secure memory so the PSCI implementation in ARM-TF can access it, but
not expose it to non secure firmware or OS except by via ARM-TF.
Signed-off-by: Graeme Gregory <graeme@nuviainc.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Tested-by: Leif Lindholm <leif@nuviainc.com>
Message-id: 20200826141952.136164-3-graeme@nuviainc.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A difference between sbsa platform and the virt platform is PSCI is
handled by ARM-TF in the sbsa platform. This means that the PSCI code
there needs to communicate some of the platform power changes down
to the qemu code for things like shutdown/reset control.
Space has been left to extend the EC if we find other use cases in
future where ARM-TF and qemu need to communicate.
Signed-off-by: Graeme Gregory <graeme@nuviainc.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Tested-by: Leif Lindholm <leif@nuviainc.com>
Message-id: 20200826141952.136164-2-graeme@nuviainc.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The sbsa-ref platform uses a minimal device tree to pass amount of memory
as well as number of cpus to the firmware. However, when dumping that
minimal dtb (with -M sbsa-virt,dumpdtb=<file>), the resulting blob
generates a warning when decompiled by dtc due to lack of reg property.
Add a simple reg property per cpu, representing a 64-bit MPIDR_EL1.
This also ends up being cleaner than having the firmware calculating its
own IDs for generating APCI.
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200827124335.30586-1-leif@nuviainc.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Support a following SPI flashes:
* mx66l51235f
* mt25ql512ab
Signed-off-by: Igor Kononenko <i.kononenko@yadro.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200811203724.20699-1-i.kononenko@yadro.com>
Message-Id: <20200819100956.2216690-22-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This change works around the HW default values to be able to test the
Tacoma board with -kernel command line option. This was required when
we had both flash chips enabled in the device tree, otherwise Linux
would fail to probe the entire controller leaving it with no rootfs.
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20200819100956.2216690-20-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Changes in commit 533eb415df ("arm/aspeed: actually check RAM size")
introduced a 'valid_ram_sizes' array which can be used to compute the
associated bit field value encoding the RAM size. The field is simply
the index of the array.
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20200819100956.2216690-19-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
A subset of registers are not protected by the lock behaviour, so allow
unconditionally writing to those.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20200819100956.2216690-18-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This allows qemu to run the "normal" power on reset boot path through
u-boot, where the DDR is trained.
An enhancement would be to have the SCU bit stick across qemu reboots,
but be unset on initial boot.
Proper modelling would be to discard all writes to the phy setting regs
at offset 0x100 - 0x400 and to model the phy status regs at offset
0x400.
The status regs model would only need to account for offets 0x00,
0x50, 0x68 and 0x7c.
Signed-off-by: Joel Stanley <joel@jms.id.au>
[ clg: checkpatch fixes ]
Message-Id: <20200819100956.2216690-17-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The software reset of the MAC needs a finer granularity. Some settings
in MACCR are kept.
Cc: Frederic Konrad <konrad.frederic@yahoo.fr>
Fixes: bd44300d1a ("net: add FTGMAC100 support")
Message-Id: <20200819100956.2216690-16-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
When inserting the VLAN tag in packets, memmove() can generate an
integer overflow for packets whose length is less than 12 bytes.
Move the VLAN insertion when the last segment of the frame is reached
and check length against the size of the ethernet header (14 bytes) to
avoid the crash. Return FTGMAC100_INT_XPKT_LOST status if the frame is
too small. This seems like a good modeling choice even if Aspeed does
not specify anything in that case.
Cc: Frederic Konrad <konrad.frederic@yahoo.fr>
Cc: Mauro Matteo Cascella <mcascell@redhat.com>
Reported-by: Ziming Zhang <ezrakiez@gmail.com>
Message-Id: <20200819100956.2216690-15-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
According to the Aspeed specs, no interrupts are raised in that case
but a "Tx-packets lost" status seems like a good modeling choice for
all implementations. It is covered by the Linux kernel.
Cc: Frederic Konrad <konrad.frederic@yahoo.fr>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20200819100956.2216690-14-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The model uses today the "Normal priority transmit buffer unavailable"
interrupt status which it is not appropriate. According to the Aspeed
specs, no interrupts are raised in that case. An "AHB error" status
seems like a better modeling choice for all implementations since it
is covered by the Linux kernel.
Cc: Frederic Konrad <konrad.frederic@yahoo.fr>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20200819100956.2216690-13-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
As we don't model the RX or TX FIFO, raise the "Packet moved to RX
FIFO" interrupt status bit as soon as we are handling a RX packet.
Cc: Frederic Konrad <konrad.frederic@yahoo.fr>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20200819100956.2216690-12-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The second field of the TX descriptor has a set of flags to choose
when the transmit interrupt is raised : after the packet has been sent
on the ethernet or after it has been moved into the TX FIFO. But we
don't model that today.
Simply raise the "Packet transmitted on ethernet" interrupt status bit
as soon as the packet is sent by QEMU.
Cc: Frederic Konrad <konrad.frederic@yahoo.fr>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20200819100956.2216690-11-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Receive Ring Base Address Register (RXR_BADR) and the Normal Priority
Transmit Receive Ring Base Address Register (NPTXR_BADR) can also be
read.
Cc: Frederic Konrad <konrad.frederic@yahoo.fr>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20200819100956.2216690-10-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
BIT(0) of the ASPEED_SDHCI_INFO register is set by SW and polled until
the bit is cleared by HW.
Use the number of supported slots to define the default value of this
register (The AST2600 eMMC Controller only has one). Fix the reset
sequence by clearing automatically the RESET bit.
Cc: Eddie James <eajames@linux.ibm.com>
Fixes: 2bea128c3d ("hw/sd/aspeed_sdhci: New device")
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20200819100956.2216690-9-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The legacy controller only has one slave.
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20200819100956.2216690-8-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Unaligned access support is a leftover from the initial commit. There
is no such need on this device register mapping. Remove it.
Cc: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20200819100956.2216690-7-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The BMC Firmware can be downloaded from :
https://www.supermicro.com/en/products/motherboard/X11SSL-F
Signed-off-by: Erik Smit <erik.lucas.smit@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: Prettified Erik's name in email
Modified commit log ]
Message-Id: <20200715173418.186-1-erik.lucas.smit@gmail.com>
Message-Id: <20200819100956.2216690-6-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The read access size of the SCU registers can be 1/2/4 bytes and write
is 4 bytes and all Aspeed models would need a .valid.accepts() handler.
For the moment, set the min access size to 1 byte to cover both read
and write operations on the AST2400 but keep the min access size of
the other SoCs to 4 bytes as this is an unusual access size.
This fixes support for some old firmware doing 2 bytes reads on the
AST2400 SoC.
Reported-by: Erik Smit <erik.lucas.smit@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20200819100956.2216690-5-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The mx25l25635e returns the JEDEC ID twice when issuing a RDID command :
[ 2.512027] aspeed-smc 1e630000.spi: reading JEDEC ID C2:20:19:C2:20:19
This can break some firmware testing for this condition on the
supermicrox11-bmc machine.
Reported-by: Erik Smit <erik.lucas.smit@gmail.com>
Message-Id: <20200819100956.2216690-2-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Clang static code analyzer show warning:
hw/intc/exynos4210_combiner.c:231:9: warning: Value stored to 'val' is never read
val = s->reg_set[offset >> 2];
The default register return value should be return 'val'.
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200827110311.164316-10-kuhn.chenqun@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Clang static code analyzer show warning:
hw/net/virtio-net.c:2077:5: warning: Value stored to 'tcp_flag' is never read
tcp_flag &= VIRTIO_NET_TCP_FLAG;
^ ~~~~~~~~~~~~~~~~~~~
The 'VIRTIO_NET_TCP_FLAG' is '0x3F'. The last ‘tcp_flag’ assignment statement is
the same as that of the first two statements.
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20200827110311.164316-7-kuhn.chenqun@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Most of the MDIOBus fields are unused. The ADVERTISE_10HALF
definition is unused. Remove unused code.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-Id: <20200814133007.16850-1-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use self-explicit definitions instead of magic '512' value.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20200814082841.27000-8-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
