To achieve desired "x-ignore-shared" functionality, we should not
discard all RAM when realizing the device and not mess with
preallocation/postcopy when loading device state. In essence, we should
not touch RAM content.
As "x-ignore-shared" gets set after realizing the device, we cannot
rely on that. Let's simply skip discarding of RAM on incoming migration.
Note that virtio_mem_post_load() will call
virtio_mem_restore_unplugged() -- unless "x-ignore-shared" is set. So
once migration finished we'll have a consistent state.
The initial system reset will also not discard any RAM, because
virtio_mem_unplug_all() will not call virtio_mem_unplug_all() when no
memory is plugged (which is the case before loading the device state).
Note that something like VM templating -- see commit b17fbbe55c
("migration: allow private destination ram with x-ignore-shared") -- is
currently incompatible with virtio-mem and ram_block_discard_range() will
warn in case a private file mapping is supplied by virtio-mem.
For VM templating with virtio-mem, it makes more sense to either
(a) Create the template without the virtio-mem device and hotplug a
virtio-mem device to the new VM instances using proper own memory
backend.
(b) Use a virtio-mem device that doesn't provide any memory in the
template (requested-size=0) and use private anonymous memory.
Message-ID: <20230706075612.67404-5-david@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Already when starting QEMU we perform one system reset that ends up
triggering virtio_mem_unplug_all() with no actual memory plugged yet.
That, in turn will trigger ram_block_discard_range() and perform some
other actions that are not required in that case.
Let's optimize virtio_mem_unplug_all() for the case that no memory is
plugged. This will be beneficial for x-ignore-shared support as well.
Message-ID: <20230706075612.67404-3-david@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
QEMU uses vhost_svq_translate_addr() to translate addresses
between the QEMU's virtual address and the SVQ IOVA. In order
to validate this translation, QEMU checks whether the translated
range falls within the mapped range.
Yet the problem is that, the value of `needle_last`, which is calculated
by `needle.translated_addr + iovec[i].iov_len`, should represent the
exclusive boundary of the translated range, rather than the last
inclusive addresses of the range. Consequently, QEMU fails the check
when the translated range matches the size of the mapped range.
This patch solves this problem by fixing the `needle_last` value to
the last inclusive address of the translated range.
Note that this bug cannot be triggered at the moment, because QEMU
is unable to translate such a big range due to the truncation of
the CVQ command in vhost_vdpa_net_handle_ctrl_avail().
Fixes: 34e3c94eda ("vdpa: Add custom IOTLB translations to SVQ")
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Message-Id: <ee31c5420ffc8e6a29705ddd30badb814ddbae1d.1688743107.git.yin31149@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fixes: 544f0278af (virtio: introduce macro VIRTIO_CONFIG_IRQ_IDX)
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230710153522.3469097-4-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The current error messages in virtio_iommu_set_page_size_mask()
sound quite similar for different situations and miss the IOMMU
memory region that causes the issue.
Clarify them and rework the comment.
Also remove the trace when the new page_size_mask is not applied as
the current frozen granule is kept. This message is rather confusing
for the end user and anyway the current granule would have been used
by the driver.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20230705165118.28194-3-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
When running on a 64kB page size host and protecting a VFIO device
with the virtio-iommu, qemu crashes with this kind of message:
qemu-kvm: virtio-iommu page mask 0xfffffffffffff000 is incompatible
with mask 0x20010000
qemu: hardware error: vfio: DMA mapping failed, unable to continue
This is due to the fact the IOMMU MR corresponding to the VFIO device
is enabled very late on domain attach, after the machine init.
The device reports a minimal 64kB page size but it is too late to be
applied. virtio_iommu_set_page_size_mask() fails and this causes
vfio_listener_region_add() to end up with hw_error();
To work around this issue, we transiently enable the IOMMU MR on
machine init to collect the page size requirements and then restore
the bypass state.
Fixes: 90519b9053 ("virtio-iommu: Add bypass mode support to assigned device")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20230705165118.28194-2-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
With TPM CRM device, vhost-vdpa reports an error when it tries
to register a listener for a non aligned memory region:
qemu-system-x86_64: vhost_vdpa_listener_region_add received unaligned region
qemu-system-x86_64: vhost_vdpa_listener_region_del received unaligned region
This error can be confusing for the user whereas we only need to skip
the region (as it's already done after the error_report())
Rather than introducing a special case for TPM CRB memory section
to not display the message in this case, simply replace the
error_report() by a trace function (with more information, like the
memory region name).
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20230704071931.575888-2-lvivier@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A device reset is issued per device, not per VQ. The legacy device reset
message, VHOST_USER_RESET_OWNER, is already a per device message. Therefore,
this change adds the proper message, VHOST_USER_RESET_DEVICE, to per device
messages.
Signed-off-by: Tom Lonergan <tom.lonergan@nutanix.com>
Message-Id: <20230628163927.108171-3-tom.lonergan@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Some devices, like virtio-scsi, consist of one vhost_dev, while others, like
virtio-net, contain multiple vhost_devs. The QEMU vhost-user code has a
concept of one-time messages which is misleading. One-time messages are sent
once per operation on the device, not once for the lifetime of the device.
Therefore, as discussed in [1], vhost_user_one_time_request should be
renamed to vhost_user_per_device_request and the relevant comments updated
to match the real functionality.
[1] https://lore.kernel.org/qemu-devel/20230127083027-mutt-send-email-mst@kernel.org/
Signed-off-by: Tom Lonergan <tom.lonergan@nutanix.com>
Message-Id: <20230628163927.108171-2-tom.lonergan@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
This allows is to instantiate a vhost-user-scmi device as part of a PCI bus.
It is mostly boilerplate similar to the other vhost-user-*-pci boilerplates
of similar devices.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Message-Id: <20230628100524.342666-3-mzamazal@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This creates the QEMU side of the vhost-user-scmi device which connects to
the remote daemon. It is based on code of similar vhost-user devices.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Message-Id: <20230628100524.342666-2-mzamazal@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The guest can disable or never enable Device-TLB. In these cases,
it can't be used even if enabled in QEMU. So, check Device-TLB state
before registering IOMMU notifier and select unmap flag depending on
that. Also, implement a way to change IOMMU notifier flag if Device-TLB
state is changed.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2001312
Signed-off-by: Viktor Prutyanov <viktor@daynix.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230626091258.24453-2-viktor@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It is always 0 and it is not useful to route call through file
descriptor.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230526153736.472443-1-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add MEMORY_LISTENER_PRIORITY_DEV_BACKEND for the symbolic value
for memory listener to replace the hard-coded value 10 for the
device backend.
No functional change intended.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <8314d91688030d7004e96958f12e2c83fb889245.1687279702.git.isaku.yamahata@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Slave/master nomenclature was replaced with backend/frontend in commit
1fc19b6527 ("vhost-user: Adopt new backend naming")
This patch replaces all remaining uses of master and slave in the
codebase.
Signed-off-by: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <20230613080849.2115347-1-manos.pitsidianakis@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
in vhost_dev_enable_notifiers(), if virtio_bus_set_host_notifier(true)
fails, we call vhost_dev_disable_notifiers() that executes
virtio_bus_set_host_notifier(false) on all queues, even on queues that
have failed to be initialized.
This triggers a core dump in memory_region_del_eventfd():
virtio_bus_set_host_notifier: unable to init event notifier: Too many open files (-24)
vhost VQ 1 notifier binding failed: 24
.../softmmu/memory.c:2611: memory_region_del_eventfd: Assertion `i != mr->ioeventfd_nb' failed.
Fix the problem by providing to vhost_dev_disable_notifiers() the
number of queues to disable.
Fixes: 8771589b6f ("vhost: simplify vhost_dev_enable_notifiers")
Cc: longpeng2@huawei.com
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20230602162735.3670785-1-lvivier@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The vdpa devices that use va addresses neeeds these maps shared.
Otherwise, vhost_vdpa checks will refuse to accept the maps.
The mmap call will always return a page aligned address, so removing the
qemu_memalign call. Keeping the ROUND_UP for the size as we still need
to DMA-map them in full.
Not applying fixes tag as it never worked with va devices.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230602143854.1879091-4-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let's separate plug and unplug handling to prepare for future changes
and make the code a bit easier to read -- working on block states
(plugged/unplugged) instead of on a bitmap.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Gavin Shan <gshan@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230523183036.517957-1-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost_dev_start function does not release virtqueue objects when
event_notifier_init() function fails. Release virtqueue objects
and log a message about function failure.
Signed-off-by: Prasad Pandit <pjp@fedoraproject.org>
Message-Id: <20230529114333.31686-3-ppandit@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fixes: f9a09ca3ea ("vhost: add support for configure interrupt")
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: qemu-stable@nongnu.org
Acked-by: Jason Wang <jasowang@redhat.com>
vhost_dev_start function does not release memory_listener object
in case of an error. This may crash the guest when vhost is unable
to set memory table:
stack trace of thread 125653:
Program terminated with signal SIGSEGV, Segmentation fault
#0 memory_listener_register (qemu-kvm + 0x6cda0f)
#1 vhost_dev_start (qemu-kvm + 0x699301)
#2 vhost_net_start (qemu-kvm + 0x45b03f)
#3 virtio_net_set_status (qemu-kvm + 0x665672)
#4 qmp_set_link (qemu-kvm + 0x548fd5)
#5 net_vhost_user_event (qemu-kvm + 0x552c45)
#6 tcp_chr_connect (qemu-kvm + 0x88d473)
#7 tcp_chr_new_client (qemu-kvm + 0x88cf83)
#8 tcp_chr_accept (qemu-kvm + 0x88b429)
#9 qio_net_listener_channel_func (qemu-kvm + 0x7ac07c)
#10 g_main_context_dispatch (libglib-2.0.so.0 + 0x54e2f)
Release memory_listener objects in the error path.
Signed-off-by: Prasad Pandit <pjp@fedoraproject.org>
Message-Id: <20230529114333.31686-2-ppandit@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Fixes: c471ad0e9b ("vhost_net: device IOTLB support")
Cc: qemu-stable@nongnu.org
Acked-by: Jason Wang <jasowang@redhat.com>
The previous commit remove the unnecessary "virtio-access.h"
header. These files no longer have target-specific dependency.
Move them to the generic 'softmmu_ss' source set.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230524093744.88442-11-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
None of these files use the VirtIO Load/Store API declared
by "hw/virtio/virtio-access.h". This header probably crept
in via copy/pasting, remove it.
Note, "virtio-access.h" is target-specific, so any file
including it also become tainted as target-specific.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230524093744.88442-10-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
In order to have virtio-iommu.c become target-agnostic,
we need to avoid using TARGET_PAGE_MASK. Get it with the
qemu_target_page_mask() helper.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20230524093744.88442-9-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Instead of having "virtio/virtio-bus.h" implicitly included,
explicitly include it, to avoid when rearranging headers:
hw/virtio/vhost-vsock-common.c: In function ‘vhost_vsock_common_start’:
hw/virtio/vhost-vsock-common.c:51:5: error: unknown type name ‘VirtioBusClass’; did you mean ‘VirtioDeviceClass’?
51 | VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus);
| ^~~~~~~~~~~~~~
| VirtioDeviceClass
hw/virtio/vhost-vsock-common.c:51:25: error: implicit declaration of function ‘VIRTIO_BUS_GET_CLASS’; did you mean ‘VIRTIO_DEVICE_CLASS’? [-Werror=implicit-function-declaration]
51 | VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus);
| ^~~~~~~~~~~~~~~~~~~~
| VIRTIO_DEVICE_CLASS
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230524093744.88442-8-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Avoid accessing RAMBlock internals, use the provided
qemu_ram_get_fd() getter to get the file descriptor.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230524093744.88442-7-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Instead of adding 'vhost-vsock-common.c' twice (for VHOST_VSOCK
and VHOST_USER_VSOCK), have it depend on VHOST_VSOCK_COMMON,
selected by both symbols.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230524093744.88442-6-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Add asymmetric crypto support in vhost_user backend.
Signed-off-by: Gowrishankar Muthukrishnan <gmuthukrishn@marvell.com>
Message-Id: <20230516083139.2349744-1-gmuthukrishn@marvell.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We use the user_ss[] array to hold the user emulation sources,
and the softmmu_ss[] array to hold the system emulation ones.
Hold the latter in the 'system_ss[]' array for parity with user
emulation.
Mechanical change doing:
$ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-10-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Mechanical change running Coccinelle spatch with content
generated from the qom-cast-macro-clean-cocci-gen.py added
in the previous commit.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230601093452.38972-3-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
All callers now pass is_external=false to aio_set_fd_handler() and
aio_set_event_notifier(). The aio_disable_external() API that
temporarily disables fd handlers that were registered is_external=true
is therefore dead code.
Remove aio_disable_external(), aio_enable_external(), and the
is_external arguments to aio_set_fd_handler() and
aio_set_event_notifier().
The entire test-fdmon-epoll test is removed because its sole purpose was
testing aio_disable_external().
Parts of this patch were generated using the following coccinelle
(https://coccinelle.lip6.fr/) semantic patch:
@@
expression ctx, fd, is_external, io_read, io_write, io_poll, io_poll_ready, opaque;
@@
- aio_set_fd_handler(ctx, fd, is_external, io_read, io_write, io_poll, io_poll_ready, opaque)
+ aio_set_fd_handler(ctx, fd, io_read, io_write, io_poll, io_poll_ready, opaque)
@@
expression ctx, notifier, is_external, io_read, io_poll, io_poll_ready;
@@
- aio_set_event_notifier(ctx, notifier, is_external, io_read, io_poll, io_poll_ready)
+ aio_set_event_notifier(ctx, notifier, io_read, io_poll, io_poll_ready)
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230516190238.8401-21-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Host notifiers can now use is_external=false since virtio-blk and
virtio-scsi no longer rely on is_external=true for drained sections.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230516190238.8401-20-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
virtio_queue_aio_detach_host_notifier() does two things:
1. It removes the fd handler from the event loop.
2. It processes the virtqueue one last time.
The first step can be peformed by any thread and without taking the
AioContext lock.
The second step may need the AioContext lock (depending on the device
implementation) and runs in the thread where request processing takes
place. virtio-blk and virtio-scsi therefore call
virtio_queue_aio_detach_host_notifier() from a BH that is scheduled in
AioContext.
The next patch will introduce a .drained_begin() function that needs to
call virtio_queue_aio_detach_host_notifier(). .drained_begin() functions
cannot call aio_poll() to wait synchronously for the BH. It is possible
for a .drained_poll() callback to asynchronously wait for the BH, but
that is more complex than necessary here.
Move the virtqueue processing out to the callers of
virtio_queue_aio_detach_host_notifier() so that the function can be
called from any thread. This is in preparation for the next patch.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230516190238.8401-17-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add virtio-multitouch-pci, a Multitouch-capable input device, to the
list of devices that can be provided by virtio-input-pci.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230526112925.38794-5-slp@redhat.com>
The VirtioInfoList is already allocated by QAPI_LIST_PREPEND and
need not be allocated by the caller.
Fixes Coverity CID 1508724.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add an option for hostmem-file to start the memory object at an offset
into the target file. This is useful if multiple memory objects reside
inside the same target file, such as a device node.
In particular, it's useful to map guest memory directly into /dev/mem
for experimentation.
To make this work consistently, also fix up all places in QEMU that
expect fd offsets to be 0.
Signed-off-by: Alexander Graf <graf@amazon.com>
Message-Id: <20230403221421.60877-1-graf@amazon.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
According to PCIe Address Translation Services specification 5.1.3.,
ATS Control Register has Enable bit to enable/disable ATS. Guest may
enable/disable PCI ATS and, accordingly, Device-TLB for the VirtIO PCI
device. So, raise/lower a flag and call a trigger function to pass this
event to a device implementation.
Signed-off-by: Viktor Prutyanov <viktor@daynix.com>
Message-Id: <20230512135122.70403-2-viktor@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
1. The vIOMMU support will make vDPA can work in IOMMU mode. This
will fix security issues while using the no-IOMMU mode.
To support this feature we need to add new functions for IOMMU MR adds and
deletes.
Also since the SVQ does not support vIOMMU yet, add the check for IOMMU
in vhost_vdpa_dev_start, if the SVQ and IOMMU enable at the same time
the function will return fail.
2. Skip the iova_max check vhost_vdpa_listener_skipped_section(). While
MR is IOMMU, move this check to vhost_vdpa_iommu_map_notify()
Verified in vp_vdpa and vdpa_sim_net driver
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20230510054631.2951812-5-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The unmap ioctl doesn't accept a full 64-bit span. So need to
add check for the section's size in vhost_vdpa_listener_region_del().
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20230510054631.2951812-4-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In trace_vhost_vdpa_listener_region_del, the value for llend
should change to int128_get64(int128_sub(llend, int128_one()))
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20230510054631.2951812-3-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To support vIOMMU in vdpa, need to exposed the function
vhost_dev_has_iommu, vdpa will use this function to check
if vIOMMU enable.
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20230510054631.2951812-2-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Ensure op_info is not NULL in case of QCRYPTODEV_BACKEND_ALG_SYM algtype.
Fixes: 0e660a6f90 ("crypto: Introduce RSA algorithm")
Signed-off-by: Mauro Matteo Cascella <mcascell@redhat.com>
Reported-by: Yiming Tao <taoym@zju.edu.cn>
Message-Id: <20230509075317.1132301-1-mcascell@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: zhenwei pi<pizhenwei@bytedance.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let's just support 512 memslots on x86-64 and aarch64 as well. The maximum
number of ACPI slots (256) is no longer completely expressive ever since
we supported virtio-based memory devices. Further, we're completely
ignoring other memslots used outside of memory device context, such as
memslots used for boot memory.
Note that the vhost memslot limit in the kernel is usually configured to
be 509. With this change, we prepare vhost-user on the QEMU side to be
closer to that limit, to eventually support ~512 memslots in most vhost
implementations and have less "surprises" when cold/hotplugging vhost
devices while also consuming more memslots than we're currently used to
by memory devices (e.g., once virtio-mem starts using multiple memslots).
Note that most vhost-user implementations only support a small number of
memslots so far, which we can hopefully improve in the near future.
We'll leave the PPC special-case as is for now.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230503184144.808478-1-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Allowing guests to read unplugged memory simplified the bring-up of
virtio-mem in Linux guests -- which was limited to x86-64 only. On arm64
(which was added later), we never had legacy guests and don't even allow
to configure it, essentially always having "unplugged-inaccessible=on".
At this point, all guests we care about
should be supporting VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE, so let's
change the default for the 8.1 machine.
This change implies that also memory that supports the shared zeropage
(private anonymous memory) will now require
VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE in the driver in order to be usable by
the guest -- as default, one can still manually set the
unplugged-inaccessible property.
Disallowing the guest to read unplugged memory will be important for
some future features, such as memslot optimizations or protection of
unplugged memory, whereby we'll actually no longer allow the guest to
even read from unplugged memory.
At some point, we might want to deprecate and remove that property.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Eduardo Habkost <eduardo@habkost.net>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230503182352.792458-1-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Setting the VIRTIO Device Status Field to 0 resets the device. The
device's state is lost, including the vring configuration.
vhost-user.c currently sends SET_STATUS 0 before GET_VRING_BASE. This
risks confusion about the lifetime of the vhost-user state (e.g. vring
last_avail_idx) across VIRTIO device reset.
Eugenio Pérez <eperezma@redhat.com> adjusted the order for vhost-vdpa.c
in commit c3716f260b ("vdpa: move vhost reset after get vring base")
and in that commit description suggested doing the same for vhost-user
in the future.
Go ahead and adjust vhost-user.c now. I ran various online code searches
to identify vhost-user backends implementing SET_STATUS. It seems only
DPDK implements SET_STATUS and Yajun Wu <yajunw@nvidia.com> has
confirmed that it is safe to make this change.
Fixes: commit 923b8921d2 ("vhost-user: Support vhost_dev_start")
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Cindy Lu <lulu@redhat.com>
Cc: Yajun Wu <yajunw@nvidia.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230501230409.274178-1-stefanha@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Yajun Wu <yajunw@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
QEMU invokes vhost_svq_add() when adding a guest's element
into SVQ. In vhost_svq_add(), it uses vhost_svq_available_slots()
to check whether QEMU can add the element into SVQ. If there is
enough space, then QEMU combines some out descriptors and some
in descriptors into one descriptor chain, and adds it into
`svq->vring.desc` by vhost_svq_vring_write_descs().
Yet the problem is that, `svq->shadow_avail_idx - svq->shadow_used_idx`
in vhost_svq_available_slots() returns the number of occupied elements,
or the number of descriptor chains, instead of the number of occupied
descriptors, which may cause wrapping in SVQ descriptor ring.
Here is an example. In vhost_handle_guest_kick(), QEMU forwards
as many available buffers to device by virtqueue_pop() and
vhost_svq_add_element(). virtqueue_pop() returns a guest's element,
and then this element is added into SVQ by vhost_svq_add_element(),
a wrapper to vhost_svq_add(). If QEMU invokes virtqueue_pop() and
vhost_svq_add_element() `svq->vring.num` times,
vhost_svq_available_slots() thinks QEMU just ran out of slots and
everything should work fine. But in fact, virtqueue_pop() returns
`svq->vring.num` elements or descriptor chains, more than
`svq->vring.num` descriptors due to guest memory fragmentation,
and this causes wrapping in SVQ descriptor ring.
This bug is valid even before marking the descriptors used.
If the guest memory is fragmented, SVQ must add chains
so it can try to add more descriptors than possible.
This patch solves it by adding `num_free` field in
VhostShadowVirtqueue structure and updating this field
in vhost_svq_add() and vhost_svq_get_buf(), to record
the number of free descriptors.
Fixes: 100890f7ca ("vhost: Shadow virtqueue buffers forwarding")
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230509084817.3973-1-yin31149@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
This patch extends virtio-blk emulation to handle zoned device commands
by calling the new block layer APIs to perform zoned device I/O on
behalf of the guest. It supports Report Zone, four zone oparations (open,
close, finish, reset), and Append Zone.
The VIRTIO_BLK_F_ZONED feature bit will only be set if the host does
support zoned block devices. Regular block devices(conventional zones)
will not be set.
The guest os can use blktests, fio to test those commands on zoned devices.
Furthermore, using zonefs to test zone append write is also supported.
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Message-id: 20230508051916.178322-2-faithilikerun@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This protects devices from bh->mmio reentrancy issues.
Thanks: Thomas Huth <thuth@redhat.com> for diagnosing OS X test failure.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230427211013.2994127-5-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
- Protect BlockBackend.queued_requests with its own lock
- Switch to AIO_WAIT_WHILE_UNLOCKED() where possible
- AioContext removal: LinuxAioState/LuringState/ThreadPool
- Add more coroutine_fn annotations, use bdrv/blk_co_*
- Fix crash when execute hmp_commit
-----BEGIN PGP SIGNATURE-----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=mpYX
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://repo.or.cz/qemu/kevin into staging
Block layer patches
- Protect BlockBackend.queued_requests with its own lock
- Switch to AIO_WAIT_WHILE_UNLOCKED() where possible
- AioContext removal: LinuxAioState/LuringState/ThreadPool
- Add more coroutine_fn annotations, use bdrv/blk_co_*
- Fix crash when execute hmp_commit
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmRH0b0RHGt3b2xmQHJl
# ZGhhdC5jb20ACgkQfwmycsiPL9Y0yw/6A/vzA4TGgFUP3WIvH/sQri4/V3gyR+PT
# u3hOQUCYZ99nioTpKV91TSuUPuU/Mdspy/0NKM+K92yIXqxa9172A2zLOsGOu21l
# qKpse+nBf1zqEgB8YzUHyCBdetPz916C/f9RS26SNUCW85GCHYGHA3u7nKvWLMyV
# oKIoTlA8QOglOuEKlRoYh7hCFm7ET51NOSEftm8GsYbsW/I2Vzl8a1SHN1lHufjd
# We3+898zUrmFqNMp6Rjdhn+yZmmoGzoZqV4YQi83z7xjiv+Ms4VHVVW7X8d20xRX
# 5BLFiLHAuZ/1d26HyVhgBUr7KHyf94odocz8BylWKXGl5SXMCZun1Td1vgVKlGK+
# GRxzB2cWGWqzC2UmqSTc0Z0aIWbXukKwvcX76uBKsQZ+kB2A7jFobxHiaoQEDJ8B
# WRNEMH2+CqCAu9rsrNRinnJKhT2nXcr9F9YfwRIlagdAePGWin+EUW8huf14dDBm
# Z2Y34aKW4RQibF8xirMHeRBbOLmcq2VpKLKwNfBHUDgZB8iuD7bLn4n9nwWXMG1w
# zgNsTybkv46vLPamTpEaUoNTHfuRDTAuE7Z7lkcc7jF41Z0V1DC/DCCWcL/0LvhP
# GIxFdkYug3hetdF2U/OZhUoEfxvkqcuBnrr55LFzqheKEllQpPwPpt7UF0aH8bg3
# i/YpjHsf3xU=
# =mpYX
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 25 Apr 2023 02:12:29 PM BST
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
* tag 'for-upstream' of https://repo.or.cz/qemu/kevin: (25 commits)
block/monitor: Fix crash when executing HMP commit
vmdk: make vmdk_is_cid_valid a coroutine_fn
qcow2: mark various functions as coroutine_fn and GRAPH_RDLOCK
tests: mark more coroutine_fns
qemu-pr-helper: mark more coroutine_fns
9pfs: mark more coroutine_fns
nbd: mark more coroutine_fns, do not use co_wrappers
mirror: make mirror_flush a coroutine_fn, do not use co_wrappers
blkdebug: add missing coroutine_fn annotation
vvfat: mark various functions as coroutine_fn
thread-pool: avoid passing the pool parameter every time
thread-pool: use ThreadPool from the running thread
io_uring: use LuringState from the running thread
linux-aio: use LinuxAioState from the running thread
block: add missing coroutine_fn to bdrv_sum_allocated_file_size()
include/block: fixup typos
monitor: convert monitor_cleanup() to AIO_WAIT_WHILE_UNLOCKED()
hmp: convert handle_hmp_command() to AIO_WAIT_WHILE_UNLOCKED()
block: convert bdrv_drain_all_begin() to AIO_WAIT_WHILE_UNLOCKED()
block: convert bdrv_graph_wrlock() to AIO_WAIT_WHILE_UNLOCKED()
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
thread_pool_submit_aio() is always called on a pool taken from
qemu_get_current_aio_context(), and that is the only intended
use: each pool runs only in the same thread that is submitting
work to it, it can't run anywhere else.
Therefore simplify the thread_pool_submit* API and remove the
ThreadPool function parameter.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20230203131731.851116-5-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
