Pointer authentication on aarch64 is pretty expensive (up to 50% of
execution time) when running a virtual machine with tcg and -cpu max
(which enables pauth=on).
The advice is always: use pauth-impdef=on.
Our documentation even mentions it "by default" in
docs/system/introduction.rst.
Thus, we change the default to use impdef by default. This does not
affect kvm or hvf acceleration, since pauth algorithm used is the one
from host cpu.
This change is retro compatible, in terms of cli, with previous
versions, as the semantic of using -cpu max,pauth-impdef=on, and -cpu
max,pauth-qarma3=on is preserved.
The new option introduced in previous patch and matching old default is
-cpu max,pauth-qarma5=on.
It is retro compatible with migration as well, by defining a backcompat
property, that will use qarma5 by default for virt machine <= 9.2.
Tested by saving and restoring a vm from qemu 9.2.0 into qemu-master
(10.0) for cpus neoverse-n2 and max.
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241219183211.3493974-3-pierrick.bouvier@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use machine_get_container() whenever applicable across the tree.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241121192202.4155849-11-peterx@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Add a helper to fetch machine containers. Add some sanity check around.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-ID: <20241121192202.4155849-10-peterx@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Currently, qdev_get_machine() has a slight misuse on container_get(), as
the helper says "get a container" but in reality the goal is to get the
machine object. It is still a "container" but not strictly.
Note that it _may_ get a container (at "/machine") in our current unit test
of test-qdev-global-props.c before all these changes, but it's probably
unexpected and worked by accident.
Switch to an explicit object_resolve_path_component(), with a side benefit
that qdev_get_machine() can happen a lot, and we don't need to split the
string ("/machine") every time. This also paves way for making the helper
container_get() never try to return a non-container at all.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241121192202.4155849-9-peterx@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
When a QDev instance is realized, qdev_get_machine() ends up called.
In the next commit, qdev_get_machine() will require a "machine"
container to be always present. To satisfy this QOM containers design,
Implement qdev_create_fake_machine() which creates a fake "machine"
container for user emulation.
On system emulation, qemu_create_machine() is called from qemu_init().
For user emulation, since the TCG accelerator always calls
tcg_init_machine(), we use it to hook our fake machine creation.
Suggested-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250102211800.79235-2-philmd@linaro.org>
It is no longer used.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20250104-reuse-v18-14-c349eafd8673@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Convert to use sszie_t to represent size internally to avoid
large image overflowing the size.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
"exec/confidential-guest-support.h" is specific to system
emulation, so move it under the system/ namespace.
Mechanical change doing:
$ sed -i \
-e 's,exec/confidential-guest-support.h,sysemu/confidential-guest-support.h,' \
$(git grep -l exec/confidential-guest-support.h)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20241218155913.72288-2-philmd@linaro.org>
Headers in include/sysemu/ are not only related to system
*emulation*, they are also used by virtualization. Rename
as system/ which is clearer.
Files renamed manually then mechanical change using sed tool.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Message-Id: <20241203172445.28576-1-philmd@linaro.org>
Always explicitly create QEMU system containers upfront.
Root containers will be created when trying to fetch the root object the
1st time. They are:
/objects
/chardevs
/backend
Machine sub-containers will be created only until machine is being
initialized. They are:
/machine/unattached
/machine/peripheral
/machine/peripheral-anon
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241121192202.4155849-8-peterx@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Via sed "s/ Property [*]/ const Property */".
The opaque pointers passed to ObjectProperty callbacks are
the last instances of non-const Property pointers in the tree.
For the most part, these callbacks only use object_field_prop_ptr,
which now takes a const pointer itself.
This logically should have accompanied d36f165d95 which
allowed const Property to be registered.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Link: https://lore.kernel.org/r/20241218134251.4724-25-richard.henderson@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This logically should have accompanied d36f165d95 which
allowed const Property to be registered.
There is exactly one instance of this method: print_pci_devfn.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Link: https://lore.kernel.org/r/20241218134251.4724-24-richard.henderson@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This logically should have accompanied d36f165d95 which
allowed const Property to be registered.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Link: https://lore.kernel.org/r/20241218134251.4724-23-richard.henderson@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that all of the Property arrays are counted, we can remove
the terminator object from each array. Update the assertions
in device_class_set_props to match.
With struct Property being 88 bytes, this was a rather large
form of terminator. Saves 30k from qemu-system-aarch64.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Link: https://lore.kernel.org/r/20241218134251.4724-21-richard.henderson@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All uses of device_class_set_props() are now using arrays.
Validate this compile-time in the device_class_set_props macro and
call device_class_set_props_n using the known size of the array.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Link: https://lore.kernel.org/r/20241218134251.4724-19-richard.henderson@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Record the size of the array in DeviceClass.props_count_.
Iterate with known count in qdev_prop_walk.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Link: https://lore.kernel.org/r/20241218134251.4724-14-richard.henderson@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a macro expansion of device_class_set_props which can check
on the type and size of PROPS before calling the function.
Avoid the macro in migration.c because migration_properties
is defined externally with indeterminate size.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Link: https://lore.kernel.org/r/20241218134251.4724-13-richard.henderson@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add new -shim command line option, wire up for the x86 loader.
When specified load shim into the new "etc/boot/shim" fw_cfg file.
Needs OVMF changes too to be actually useful.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-ID: <20240905141211.1253307-6-kraxel@redhat.com>
We were storing the pointers to buffers in a GList due to lack of
stateful crypto apis and instead doing the final hash computation at
the end after we had all the necessary buffers. Now that we have the
stateful qcrypto apis available, we can instead update the hashes
inline in the read_eif_* functions which makes the code much simpler.
Signed-off-by: Dorjoy Chowdhury <dorjoychy111@gmail.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
Message-ID: <20241109123039.24180-1-dorjoychy111@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Move object creation out of qdev_init_clocklist. The input/output
cases are very simple, and the aliases are completely different.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The 'maxmem' parameter parsed on the command line is held in uint64_t
and then assigned to the MachineState field that is 'ram_addr_t'. This
assignment will wrap on 32-bit hosts, silently changing the user's
config request if it were over-sized.
Improve the existing diagnositics for validating 'size', and add the
same diagnostics for 'maxmem'
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Message-ID: <20241127114057.255995-1-berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
pci_devfn properties accept either a string or an integer as input. To
implement this, set_pci_devfn() first tries to visit the option as a
string, and if that fails, it visits it as an integer instead. While the
QemuOpts visitor happens to accept this, it is invalid according to the
visitor interface. QObject input visitors run into an assertion failure
when this is done.
QObject input visitors are used with the JSON syntax version of -device
on the command line:
$ ./qemu-system-x86_64 -enable-kvm -M q35 -device pcie-pci-bridge,id=pci.1,bus=pcie.0 -blockdev null-co,node-name=disk -device '{ "driver": "virtio-blk-pci", "drive": "disk", "id": "virtio-disk0", "bus": "pci.1", "addr": 1 }'
qemu-system-x86_64: ../qapi/qobject-input-visitor.c:143: QObject *qobject_input_try_get_object(QObjectInputVisitor *, const char *, _Bool): Assertion `removed' failed.
The proper way to accept both strings and integers is using the
alternate mechanism, which tells us the type of the input before it's
visited. With this information, we can directly visit it as the right
type.
This fixes set_pci_devfn() by using the alternate mechanism.
Cc: qemu-stable@nongnu.org
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20241119120353.57812-1-kwolf@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In the loop checking smp cache support, the error message should report
the current cache level and type.
Fix the parameter of error_setg() to ensure it reports the correct cache
level and type.
Resolves: Coverity CID 1565391
Fixes: f35c0221fe ("hw/core: Check smp cache topology support for machine")
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20241110150901.130647-3-zhao1.liu@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The caches_bitmap is defined in machine_parse_smp_cache(), but it was
not initialized.
Initialize caches_bitmap by clearing all its bits to zero.
Resolves: Coverity CID 1565389
Fixes: 4e88e7e340 ("qapi/qom: Define cache enumeration and properties for machine")
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20241110150901.130647-2-zhao1.liu@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While adding the new flexible boot order feature on s390x recently,
we missed to add the "loadparm" property to the scsi-hd and scsi-cd
devices. This property is required on s390x to pass the information
to the boot loader about which kernel should be started or whether
the boot menu should be shown. But even more serious: The missing
property is now causing trouble with the corresponding libvirt patches
that assume that the "loadparm" property is either settable for all
bootable devices (when the "boot order" feature is implemented in
QEMU), or none (meaning the behaviour of older QEMUs that only allowed
one "loadparm" at the machine level). To fix this broken situation,
let's implement the "loadparm" property in for the SCSI devices, too.
Message-ID: <20241115141202.1877294-1-thuth@redhat.com>
Acked-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Check for overflow as well as allocation failure. Resolves Coverity CID 1564859.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Dorjoy Chowdhury <dorjoychy111@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Check for overflow to avoid that fseek() receives a sign-extended value.
Cc: Dorjoy Chowdhury <dorjoychy111@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* rust: integration tests
* rust/pl011: add support for migration
* rust/pl011: add TYPE_PL011_LUMINARY device
* rust: add support for older compilers and bindgen
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmcrrtIUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPIBwf/W0Jo87UauGYufhEmoPvWG1EAQEqP
EzNTzem9Iw92VdiSTkAtED0/TSd8RBJOwDfjjusVXZtuMPwpRNgXaFhYTT5gFTMj
Nk3NZGaX/mbNrtdrukdx9mvUWeovytdZDZccTNkpc3oyiqY9NEz06wZ0tCNJEot6
qO3dEtKXTOQTdx2R3o0oS+2OFDGEEPxZ0PuXN3sClN4iZhGfcIDsjGAWxEh6mCDy
VxqKPdax1Ig1w7M+JMclnpOsVHwcefjHiToNPwhCEGelJ9BZilkViuvBzsVRJJz3
ptYyywBE0FT8MiKQ/wyf7U64qoizJuIgHoQnUGj98hdgvbUUiW5jcBNY3A==
=s591
-----END PGP SIGNATURE-----
Merge tag 'for-upstream-rust' of https://gitlab.com/bonzini/qemu into staging
* rust: cleanups
* rust: integration tests
* rust/pl011: add support for migration
* rust/pl011: add TYPE_PL011_LUMINARY device
* rust: add support for older compilers and bindgen
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmcrrtIUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroPIBwf/W0Jo87UauGYufhEmoPvWG1EAQEqP
# EzNTzem9Iw92VdiSTkAtED0/TSd8RBJOwDfjjusVXZtuMPwpRNgXaFhYTT5gFTMj
# Nk3NZGaX/mbNrtdrukdx9mvUWeovytdZDZccTNkpc3oyiqY9NEz06wZ0tCNJEot6
# qO3dEtKXTOQTdx2R3o0oS+2OFDGEEPxZ0PuXN3sClN4iZhGfcIDsjGAWxEh6mCDy
# VxqKPdax1Ig1w7M+JMclnpOsVHwcefjHiToNPwhCEGelJ9BZilkViuvBzsVRJJz3
# ptYyywBE0FT8MiKQ/wyf7U64qoizJuIgHoQnUGj98hdgvbUUiW5jcBNY3A==
# =s591
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 06 Nov 2024 18:00:50 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream-rust' of https://gitlab.com/bonzini/qemu: (39 commits)
dockerfiles: install bindgen from cargo on Ubuntu 22.04
rust: make rustfmt optional
rust: allow older version of bindgen
rust: do not use --generate-cstr
rust: allow version 1.63.0 of rustc
rust: clean up detection of the language
rust: do not use MaybeUninit::zeroed()
rust: introduce alternative implementation of offset_of!
rust: create a cargo workspace
rust: synchronize dependencies between subprojects and Cargo.lock
rust: silence unknown warnings for the sake of old compilers
rust: introduce a c_str macro
rust: use std::os::raw instead of core::ffi
rust: fix cfgs of proc-macro2 for 1.63.0
rust: patch bilge-impl to allow compilation with 1.63.0
rust/pl011: Use correct masks for IBRD and FBRD
rust/pl011: remove commented out C code
rust/pl011: add TYPE_PL011_LUMINARY device
rust/pl011: move CLK_NAME static to function scope
rust/pl011: add support for migration
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently, we have no way to expose the arch-specific default cache
model because the cache model is sometimes related to the CPU model
(e.g., i386).
Since the user might configure "default" level, any comparison with
"default" is meaningless before the machine knows the specific level
that "default" refers to.
We can only check the correctness of the cache topology after the arch
loads the user-configured cache model from MachineState.smp_cache and
consumes the special "default" level by replacing it with the specific
level.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-ID: <20241101083331.340178-6-zhao1.liu@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Add cache_supported flags in SMPCompatProps to allow machines to
configure various caches support.
And check the compatibility of the cache properties with the
machine support in machine_parse_smp_cache().
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-ID: <20241101083331.340178-5-zhao1.liu@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The x86 and ARM need to allow user to configure cache properties
(current only topology):
* For x86, the default cache topology model (of max/host CPU) does not
always match the Host's real physical cache topology. Performance can
increase when the configured virtual topology is closer to the
physical topology than a default topology would be.
* For ARM, QEMU can't get the cache topology information from the CPU
registers, then user configuration is necessary. Additionally, the
cache information is also needed for MPAM emulation (for TCG) to
build the right PPTT.
Define smp-cache related enumeration and properties in QAPI, so that
user could configure cache properties for SMP system through -machine in
the subsequent patch.
Cache enumeration (CacheLevelAndType) is implemented as the combination
of cache level (level 1/2/3) and cache type (data/instruction/unified).
Currently, separated L1 cache (L1 data cache and L1 instruction cache)
with unified higher-level cache (e.g., unified L2 and L3 caches), is the
most common cache architectures.
Therefore, enumerate the L1 D-cache, L1 I-cache, L2 cache and L3 cache
with smp-cache object to add the basic cache topology support. Other
kinds of caches (e.g., L1 unified or L2/L3 separated caches) can be
added directly into CacheLevelAndType if necessary.
Cache properties (SmpCacheProperties) currently only contains cache
topology information, and other cache properties can be added in it
if necessary.
Note, define cache topology based on CPU topology level with two
reasons:
1. In practice, a cache will always be bound to the CPU container
(either private in the CPU container or shared among multiple
containers), and CPU container is often expressed in terms of CPU
topology level.
2. The x86's cache-related CPUIDs encode cache topology based on APIC
ID's CPU topology layout. And the ACPI PPTT table that ARM/RISCV
relies on also requires CPU containers to help indicate the private
shared hierarchy of the cache. Therefore, for SMP systems, it is
natural to use the CPU topology hierarchy directly in QEMU to define
the cache topology.
With smp-cache QAPI support, add smp cache topology for machine by
parsing the smp-cache object list.
Also add the helper to access/update cache topology level of machine.
Suggested-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-ID: <20241101083331.340178-4-zhao1.liu@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Include the missing "qemu/units.h" to fix when refactoring code:
../hw/core/machine.c:743:34: error: use of undeclared identifier 'MiB'
743 | mc->default_ram_size = 128 * MiB;
| ^
../hw/core/machine.c:750:44: error: use of undeclared identifier 'TiB'
750 | mc->smbios_memory_device_size = 2047 * TiB;
| ^
and "qemu/error-report.h" to fix:
../hw/core/machine.c:1029:13: error: call to undeclared function 'error_report' [-Wimplicit-function-declaration]
1029 | error_report("NUMA node %" PRIu16 " is missing, use "
| ^
../hw/core/machine.c:1240:9: error: call to undeclared function 'warn_report' [-Wimplicit-function-declaration]
1240 | warn_report("CPU model %s is deprecated -- %s",
| ^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20240930221900.59525-2-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
CXL now can use Generic Port Affinity Structures.
CXL now allows control of link speed and width
vhost-user-blk now supports live resize, by means of
a new device-sync-config command
amd iommu now supports interrupt remapping
pcie devices now report extended tag field support
intel_iommu dropped support for Transient Mapping, to match VTD spec
arch agnostic ACPI infrastructure for vCPU Hotplug
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmcpNqUPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp/2oH/0qO33prhDa48J5mqT9NuJzzYwp5QHKF9Zjv
fDAplMUEmfxZIEgJchcyDWPYTGX2geT4pCFhRWioZMIR/0JyzrFgSwsk1kL88cMh
46gzhNVD6ybyPJ7O0Zq3GLy5jo7rlw/n+fFxKAuRCzcbK/fmH8gNC+RwW1IP64Na
HDczYilHUhnO7yKZFQzQNQVbK4BckrG1bu0Fcx0EMUQBf4V6x7GLOrT+3hkKYcr6
+DG5DmUmv20or/FXnu2Ye+MzR8Ebx6JVK3A3sXEE4Ns2CCzK9QLzeeyc2aU13jWN
OpZ6WcKF8HqYprIwnSsMTxhPcq0/c7TvrGrazVwna5RUBMyjjvc=
=zSX4
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: features, fixes, cleanups
CXL now can use Generic Port Affinity Structures.
CXL now allows control of link speed and width
vhost-user-blk now supports live resize, by means of
a new device-sync-config command
amd iommu now supports interrupt remapping
pcie devices now report extended tag field support
intel_iommu dropped support for Transient Mapping, to match VTD spec
arch agnostic ACPI infrastructure for vCPU Hotplug
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmcpNqUPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp/2oH/0qO33prhDa48J5mqT9NuJzzYwp5QHKF9Zjv
# fDAplMUEmfxZIEgJchcyDWPYTGX2geT4pCFhRWioZMIR/0JyzrFgSwsk1kL88cMh
# 46gzhNVD6ybyPJ7O0Zq3GLy5jo7rlw/n+fFxKAuRCzcbK/fmH8gNC+RwW1IP64Na
# HDczYilHUhnO7yKZFQzQNQVbK4BckrG1bu0Fcx0EMUQBf4V6x7GLOrT+3hkKYcr6
# +DG5DmUmv20or/FXnu2Ye+MzR8Ebx6JVK3A3sXEE4Ns2CCzK9QLzeeyc2aU13jWN
# OpZ6WcKF8HqYprIwnSsMTxhPcq0/c7TvrGrazVwna5RUBMyjjvc=
# =zSX4
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 04 Nov 2024 21:03:33 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (65 commits)
intel_iommu: Add missed reserved bit check for IEC descriptor
intel_iommu: Add missed sanity check for 256-bit invalidation queue
intel_iommu: Send IQE event when setting reserved bit in IQT_TAIL
hw/acpi: Update GED with vCPU Hotplug VMSD for migration
tests/qtest/bios-tables-test: Update DSDT golden masters for x86/{pc,q35}
hw/acpi: Update ACPI `_STA` method with QOM vCPU ACPI Hotplug states
qtest: allow ACPI DSDT Table changes
hw/acpi: Make CPUs ACPI `presence` conditional during vCPU hot-unplug
hw/pci: Add parenthesis to PCI_BUILD_BDF macro
hw/cxl: Ensure there is enough data to read the input header in cmd_get_physical_port_state()
hw/cxl: Ensure there is enough data for the header in cmd_ccls_set_lsa()
hw/cxl: Check that writes do not go beyond end of target attributes
hw/cxl: Ensuring enough data to read parameters in cmd_tunnel_management_cmd()
hw/cxl: Avoid accesses beyond the end of cel_log.
hw/cxl: Check the length of data requested fits in get_log()
hw/cxl: Check enough data in cmd_firmware_update_transfer()
hw/cxl: Check input length is large enough in cmd_events_clear_records()
hw/cxl: Check input includes at least the header in cmd_features_set_feature()
hw/cxl: Check size of input data to dynamic capacity mailbox commands
hw/cxl/cxl-mailbox-util: Fix output buffer index update when retrieving DC extents
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Constify all accesses to qdev properties, except for the
ObjectPropertyAccessor itself. This makes it possible to place them in
read-only memory, and also lets Rust bindings switch from "static mut"
arrays to "static"; which is advantageous, because mutable statics are
highly discouraged.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Big cleanup of deprecated machines
* Power11 support for spapr
* XIVE improvements
* Goodbye to Cedric and David as ppc reviewers, thank you both o7
-----BEGIN PGP SIGNATURE-----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=vmIG
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-for-9.2-1-20241104' of https://gitlab.com/npiggin/qemu into staging
* Various bug fixes
* Big cleanup of deprecated machines
* Power11 support for spapr
* XIVE improvements
* Goodbye to Cedric and David as ppc reviewers, thank you both o7
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEETkN92lZhb0MpsKeVZ7MCdqhiHK4FAmcoEicACgkQZ7MCdqhi
# HK5M8Q//fz+ZkJndXkBjb1Oinx+q+eVtNm2JrvcWIsXyhG3K+6VxYPp69H+SRv/Z
# TWuUqMQPxq8mhQvBJlDAttp/oaUEiOcCRvs/iUoBN12L4mVxXfdoT88TZ4frN3eP
# 8bePq+DW2N/7gpmsJm5CyEZPpcf9AjVHgLRp3KYFkOJ/14uzvuwnocU39gl+2IUh
# MXHTedQgMNXaKorJXk1NVdM6NxMuVhOvwxAs6ya2gwhxyA5tteo5PiQOnDJWkejf
# xg3RRsNzGYcs1Qg/3kFIf3RfEB0aYbPxROM8IfPaJWKN5KnMggj/JAkHyK1x/V3J
# wml7+cB0doMt/yRiuYJhXpyrtOqpvjRWPA6RhxECWW2kwrovv8NAF8IrFnw9NvOQ
# QC66ZaaFcbAcFrVT1e/iggU76d01II6m4OAgKcXw+FRHgps4VU9y83j7ApNnNUWN
# IXp9hkzoHi5VwX0FrG4ELUr2iEf1HASMvM8EZ/0AxzWj5iNtQB8lFsrEdaGVXyIS
# M5JaJeNjCn4koCyYaFSctH5eKtbzIwnGWnDcdTwaOuQ+9itBvY8O+HZalE6sAc5S
# kLFZ7i/Ut/qxbY5pMumt8LKD4pR1SsOxFB8dJCmn/f/tvRGtIVsoY6btNe4M0+24
# 42MxZbWO6W379C32bwbtsPiGA+aLSgShjP4cWm9cgRjz4RJFnwg=
# =vmIG
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 04 Nov 2024 00:15:35 GMT
# gpg: using RSA key 4E437DDA56616F4329B0A79567B30276A8621CAE
# gpg: Good signature from "Nicholas Piggin <npiggin@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4E43 7DDA 5661 6F43 29B0 A795 67B3 0276 A862 1CAE
* tag 'pull-ppc-for-9.2-1-20241104' of https://gitlab.com/npiggin/qemu: (67 commits)
MAINTAINERS: Remove myself as reviewer
MAINTAINERS: Remove myself from XIVE
MAINTAINERS: Remove myself from the PowerNV machines
hw/ppc: Consolidate ppc440 initial mapping creation functions
hw/ppc: Consolidate e500 initial mapping creation functions
tests/qtest: Add XIVE tests for the powernv10 machine
pnv/xive2: TIMA CI ops using alternative offsets or byte lengths
pnv/xive2: TIMA support for 8-byte OS context push for PHYP
pnv/xive: Update PIPR when updating CPPR
pnv/xive: Add special handling for pool targets
ppc/xive2: Support "Pull Thread Context to Odd Thread Reporting Line"
ppc/xive2: Change context/ring specific functions to be generic
ppc/xive2: Support "Pull Thread Context to Register" operation
ppc/xive2: Allow 1-byte write of Target field in TIMA
ppc/xive2: Dump the VP-group and crowd tables with 'info pic'
ppc/xive2: Dump more NVP state with 'info pic'
pnv/xive2: Support for "OS LGS Push" TIMA operation
ppc/xive2: Support TIMA "Pull OS Context to Odd Thread Reporting Line"
pnv/xive2: Define OGEN field in the TIMA
pnv/xive: TIMA patch sets pre-req alignment and formatting changes
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
>From what I read PCI has 32 transactions, PCI Express devices can handle
256 with Extended tag enabled (spec mentions also larger values but I
lack PCIe knowledge).
QEMU leaves 'Extended tag field' with 0 as value:
Capabilities: [e0] Express (v1) Root Complex Integrated Endpoint, IntMsgNum 0
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE+ FLReset- TEE-IO-
SBSA ACS has test 824 which checks for PCIe device capabilities. BSA
specification [1] (SBSA is on top of BSA) in section F.3.2 lists
expected values for Device Capabilities Register:
Device Capabilities Register Requirement
Role based error reporting RCEC and RCiEP: Hardwired to 1
Endpoint L0s acceptable latency RCEC and RCiEP: Hardwired to 0
L1 acceptable latency RCEC and RCiEP: Hardwired to 0
Captured slot power limit scale RCEC and RCiEP: Hardwired to 0
Captured slot power limit value RCEC and RCiEP: Hardwired to 0
Max payload size value must be compliant with PCIe spec
Phantom functions RCEC and RCiEP: Recommendation is to
hardwire this bit to 0.
Extended tag field Hardwired to 1
1. https://developer.arm.com/documentation/den0094/c/
This change enables Extended tag field. All versioned platforms should
have it disabled for older versions (tested with Arm/virt).
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Message-Id: <20241023113820.486017-1-marcin.juszkiewicz@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 1392617d35 intended to tag pseries-2.1 - 2.11 machines as
deprecated with reasons mentioned in its commit log.
Removing pseries-2.3 specific code with this patch for now.
While at it, also remove the dynamic-reconfiguration option which was
introduced to disable it by default for legacy machines until pseries-2.3.
Suggested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Commit 1392617d35 intended to tag pseries-2.1 - 2.11 machines as
deprecated with reasons mentioned in its commit log.
Removing pseries-2.2 specific code with this patch for now.
Suggested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Commit 1392617d35 intended to tag pseries-2.1 - 2.11 machines as
deprecated with reasons mentioned in its commit log.
Removing pseries-2.1 specific code with this patch for now.
Suggested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This is in preparation for the next commit where the nitro-enclave
machine type will need to instead use a memfd backend, for the built-in
vhost-user-vsock device to work.
Signed-off-by: Dorjoy Chowdhury <dorjoychy111@gmail.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
Link: https://lore.kernel.org/r/20241008211727.49088-5-dorjoychy111@gmail.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
An EIF (Enclave Image Format)[1] file is used to boot an AWS nitro
enclave[2] virtual machine. The EIF file contains the necessary kernel,
cmdline, ramdisk(s) sections to boot.
Some helper functions have been introduced for extracting the necessary
sections from an EIF file and then writing them to temporary files as
well as computing SHA384 hashes from the section data. These will be
used in the following commit to add support for nitro-enclave machine
type in QEMU.
The files added in this commit are not compiled yet but will be added
to the hw/core/meson.build file in the following commit where
CONFIG_NITRO_ENCLAVE will be introduced.
[1] https://github.com/aws/aws-nitro-enclaves-image-format
[2] https://docs.aws.amazon.com/enclaves/latest/user/nitro-enclave.html
Signed-off-by: Dorjoy Chowdhury <dorjoychy111@gmail.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
Link: https://lore.kernel.org/r/20241008211727.49088-4-dorjoychy111@gmail.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
