Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-id: 20241219183211.3493974-4-pierrick.bouvier@linaro.org
[PMM: Removed a paragraph about using non-versioned models.]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Pointer authentication on aarch64 is pretty expensive (up to 50% of
execution time) when running a virtual machine with tcg and -cpu max
(which enables pauth=on).
The advice is always: use pauth-impdef=on.
Our documentation even mentions it "by default" in
docs/system/introduction.rst.
Thus, we change the default to use impdef by default. This does not
affect kvm or hvf acceleration, since pauth algorithm used is the one
from host cpu.
This change is retro compatible, in terms of cli, with previous
versions, as the semantic of using -cpu max,pauth-impdef=on, and -cpu
max,pauth-qarma3=on is preserved.
The new option introduced in previous patch and matching old default is
-cpu max,pauth-qarma5=on.
It is retro compatible with migration as well, by defining a backcompat
property, that will use qarma5 by default for virt machine <= 9.2.
Tested by saving and restoring a vm from qemu 9.2.0 into qemu-master
(10.0) for cpus neoverse-n2 and max.
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241219183211.3493974-3-pierrick.bouvier@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Before changing default pauth algorithm, we need to make sure current
default one (QARMA5) can still be selected.
$ qemu-system-aarch64 -cpu max,pauth-qarma5=on ...
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241219183211.3493974-2-pierrick.bouvier@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a new device, ivshmem-flat, which is similar to the ivshmem PCI but
does not require a PCI bus. It's meant to be used on machines like those
with Cortex-M MCUs, which usually lack a PCI/PCIe bus, e.g. lm3s6965evb
and mps2-an385.
The device currently only supports the sysbus bus.
The new device, just like the ivshmem PCI device, supports both peer
notification via hardware interrupts and shared memory.
The device shared memory size can be set using the 'shmem-size' option
and it defaults to 4 MiB, which is the default size of shmem allocated
by the ivshmem server.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1134
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
[PMD: Rebased updating Property and using DEFINE_TYPES macro]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241216141818.111255-2-gustavo.romero@linaro.org>
Add a basic board with interrupt controller (intc), timer, serial
(uartlite), small memory called LMB@0 (128kB) and DDR@0x80000000
(configured via command line eg. -m 2g).
This is basic configuration which matches HW generated out of AMD Vivado
(design tools). But initial configuration is going beyond what it is
configured by default because validation should be done on other
configurations too. That's why wire also additional uart16500, axi
ethernet(with axi dma).
GPIOs, i2c and qspi is also listed for completeness.
IRQ map is: (addr)
0 - timer (0x41c00000)
1 - uartlite (0x40600000)
2 - i2c (0x40800000)
3 - qspi (0x44a00000)
4 - uart16550 (0x44a10000)
5 - emaclite (0x40e00000)
6 - timer2 (0x41c10000)
7 - axi emac (0x40c00000)
8 - axi dma (0x41e00000)
9 - axi dma
10 - gpio (0x40000000)
11 - gpio2 (0x40010000)
12 - gpio3 (0x40020000)
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241125134739.18189-1-sai.pavan.boddu@amd.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Also add a new page, docs/specs/riscv-aia.rst, where we're documenting
the state of AIA support in QEMU w.r.t the controllers being emulated or
not depending on the AIA and accelerator settings.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241119191706.718860-9-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241106133407.604587-8-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add FEAT_XS feature report value in max cpu's ID_AA64ISAR1 sys register.
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241211144440.2700268-6-peter.maydell@linaro.org
[PMM: Add entry for FEAT_XS to documentation]
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
- Support string data for extendPCR in VirtIO NSM device (Dorjoy)
- Have PCI_BUS implement TYPE_FW_CFG_DATA_GENERATOR_INTERFACE (Phil)
- Decouple AHCI from PCI (Bernhard)
- Add status to usb_msd_packet_complete (Nick)
- Header cleanups (Alex, Phil)
-----BEGIN PGP SIGNATURE-----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=cxm9
-----END PGP SIGNATURE-----
Merge tag 'hw-misc-20241214' of https://github.com/philmd/qemu into staging
Misc HW patch queue
- Support string data for extendPCR in VirtIO NSM device (Dorjoy)
- Have PCI_BUS implement TYPE_FW_CFG_DATA_GENERATOR_INTERFACE (Phil)
- Decouple AHCI from PCI (Bernhard)
- Add status to usb_msd_packet_complete (Nick)
- Header cleanups (Alex, Phil)
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmdcwx4ACgkQ4+MsLN6t
# wN52NRAAlFWIbtUMNt37pqUCmbf9f/rpYAfvKvMQ1h1u73VfOPdFpE9TEySj8+rm
# PM/kqsjRuTxrWreEon8SBqnKmXKSLOQ2CbB3TjCy2hlfa6vs5UtTdmzN4l1cagG5
# MtOOjh0yKUAel5DhI3NxA94HJf2dHSSY9dT+6+82eYnVNCBWvTuQp/xDq1TxsW4/
# KAD+ZFDCrUVSGqkU3ZcyHmHxuuFjo8pCfFGsCf9kHAjCxtj5M0GFjMIOcT4WAAnW
# PvAM1q84ceBx5LiObEYWu+NB95Xy3YvAjCMFNRIhS64C0SR6o+HhKo9TSprMmpW6
# ncDnNmg85SbUc5yhojvkg25D63uh5NROh9J3gqoibX+Jc1poZN/Xjt98EzqmrLiv
# cYyzs4FO5r1sdVBGrRi7iRhFui61chfTJrPbNYePRABGUgxXBjPNwTUm0OwHLdi9
# X9ehbYlYlxHqV0WGq1j47uMB5/SuyeXzYDO4im6fpk7RrpliNysa5zB1vBuDUNpR
# Bu5ypprg80km20SjFieC5R0LIT+A38H2ir2qo9buJ+wd2X/n/nqxK4Ucl1s8PLBF
# 76WPLIMOV71bshlEEh6KVn+U978BsY4yPr0dZ+javNvGRzZx8ioPK+2OCT+XN39N
# oeCcTnC+9YTyYeWJqmY3Hd/kqM+32Jl7FdEEoE0EADz3fSPcvQs=
# =cxm9
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 13 Dec 2024 18:28:30 EST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* tag 'hw-misc-20241214' of https://github.com/philmd/qemu:
hw/xtensa: Include missing 'exec/tswap.h' header
hw/sh4/r2d: Include missing 'exec/tswap.h' header
hw/mips: Include missing 'exec/tswap.h' header
hw/ide/ahci: Extract TYPE_SYSBUS_AHCI into dedicated file
hw/ide/ahci: Decouple from PCI
hw/usb/hcd-xhci-pci: Indentation fix
hw/usb/hcd-xhci-nec: Remove unused XHCINecState::flags field
hw/usb/msd: Add status to usb_msd_packet_complete() function
hw/net/can: clean-up unnecessary includes
hw/nvram/fw_cfg: Remove fw_cfg_add_extra_pci_roots()
hw: Use pci_bus_add_fw_cfg_extra_pci_roots()
hw/pci: Add pci_bus_add_fw_cfg_extra_pci_roots() helper
hw/pci: Have PCI_BUS implement TYPE_FW_CFG_DATA_GENERATOR_INTERFACE
hw/nvram/fw_cfg: Skip FW_CFG_DATA_GENERATOR when no data to generate
hw/nvram/fw_cfg: Pass QOM parent to fw_cfg_add_file_from_generator()
hw/nvram/fw_cfg: Rename fw_cfg_add_[file]_from_generator()
hw/riscv/virt: Remove pointless GPEX_HOST() cast
hw/virtio/virtio-nsm: Support string data for extendPCR
hw/core/eif: Use stateful qcrypto apis
docs/nitro-enclave: Fix terminal commands formatting
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
www.orangepi.org does not support https, it's expected to stick to http.
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-id: 20241206192254.3889131-2-pierrick.bouvier@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Removal was scheduled for 10.0. Use the rainier-bmc machine or the
ast2600-evb as a replacement.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20241119071352.515790-1-clg@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
We already implement FEAT_DoubleLock (see commit f94a6df5dd) when
the ID registers call for it. This feature is actually one that must
*not* be implemented in v9.0, but since our documentation lists
everything we can emulate, we should include FEAT_DoubleLock in the
list.
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-id: 20241122225049.1617774-7-pierrick.bouvier@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: expand commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We already implement FEAT_MTE_ASYNC; we just forgot to list it
in the documentation.
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241122225049.1617774-6-pierrick.bouvier@linaro.org
[PMM: expand commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We implemented this at the same times as FEAT_SSBS, but forgot
to list it in the documentation.
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241122225049.1617774-4-pierrick.bouvier@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: improve commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add subsubsections for possible boot methods and introduce a new
section on eMMC boot support for the ast2600-evb and rainier-emmc
machines, boot partitions assumptions and limitations.
Acked-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Jan Luebbe <jlu@pengutronix.de>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Let's make it clear that s390x can also boot from virtio-net, to avoid
that people think that s390x can only boot from disk devices.
Reported-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Message-ID: <20241111105506.264640-1-thuth@redhat.com>
Reviewed-by: Prasad Pandit <pjp@fedoraproject.org>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Update documentation to include per-device loadparm support.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241115002742.3576842-1-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
FEAT_CMOW introduces support for controlling cache maintenance
instructions executed in EL0/1 and is mandatory from Armv8.8.
On real hardware, the main use for this feature is to prevent processes
from invalidating or flushing cache lines for addresses they only have
read permission, which can impact the performance of other processes.
QEMU implements all cache instructions as NOPs, and, according to rule
[1], which states that generating any Permission fault when a cache
instruction is implemented as a NOP is implementation-defined, no
Permission fault is generated for any cache instruction when it lacks
read and write permissions.
QEMU does not model any cache topology, so the PoU and PoC are before
any cache, and rules [2] apply. These rules state that generating any
MMU fault for cache instructions in this topology is also
implementation-defined. Therefore, for FEAT_CMOW, we do not generate any
MMU faults either, instead, we only advertise it in the feature
register.
[1] Rule R_HGLYG of section D8.14.3, Arm ARM K.a.
[2] Rules R_MZTNR and R_DNZYL of section D8.14.3, Arm ARM K.a.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241104142606.941638-1-gustavo.romero@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Big cleanup of deprecated machines
* Power11 support for spapr
* XIVE improvements
* Goodbye to Cedric and David as ppc reviewers, thank you both o7
-----BEGIN PGP SIGNATURE-----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=vmIG
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-for-9.2-1-20241104' of https://gitlab.com/npiggin/qemu into staging
* Various bug fixes
* Big cleanup of deprecated machines
* Power11 support for spapr
* XIVE improvements
* Goodbye to Cedric and David as ppc reviewers, thank you both o7
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEETkN92lZhb0MpsKeVZ7MCdqhiHK4FAmcoEicACgkQZ7MCdqhi
# HK5M8Q//fz+ZkJndXkBjb1Oinx+q+eVtNm2JrvcWIsXyhG3K+6VxYPp69H+SRv/Z
# TWuUqMQPxq8mhQvBJlDAttp/oaUEiOcCRvs/iUoBN12L4mVxXfdoT88TZ4frN3eP
# 8bePq+DW2N/7gpmsJm5CyEZPpcf9AjVHgLRp3KYFkOJ/14uzvuwnocU39gl+2IUh
# MXHTedQgMNXaKorJXk1NVdM6NxMuVhOvwxAs6ya2gwhxyA5tteo5PiQOnDJWkejf
# xg3RRsNzGYcs1Qg/3kFIf3RfEB0aYbPxROM8IfPaJWKN5KnMggj/JAkHyK1x/V3J
# wml7+cB0doMt/yRiuYJhXpyrtOqpvjRWPA6RhxECWW2kwrovv8NAF8IrFnw9NvOQ
# QC66ZaaFcbAcFrVT1e/iggU76d01II6m4OAgKcXw+FRHgps4VU9y83j7ApNnNUWN
# IXp9hkzoHi5VwX0FrG4ELUr2iEf1HASMvM8EZ/0AxzWj5iNtQB8lFsrEdaGVXyIS
# M5JaJeNjCn4koCyYaFSctH5eKtbzIwnGWnDcdTwaOuQ+9itBvY8O+HZalE6sAc5S
# kLFZ7i/Ut/qxbY5pMumt8LKD4pR1SsOxFB8dJCmn/f/tvRGtIVsoY6btNe4M0+24
# 42MxZbWO6W379C32bwbtsPiGA+aLSgShjP4cWm9cgRjz4RJFnwg=
# =vmIG
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 04 Nov 2024 00:15:35 GMT
# gpg: using RSA key 4E437DDA56616F4329B0A79567B30276A8621CAE
# gpg: Good signature from "Nicholas Piggin <npiggin@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4E43 7DDA 5661 6F43 29B0 A795 67B3 0276 A862 1CAE
* tag 'pull-ppc-for-9.2-1-20241104' of https://gitlab.com/npiggin/qemu: (67 commits)
MAINTAINERS: Remove myself as reviewer
MAINTAINERS: Remove myself from XIVE
MAINTAINERS: Remove myself from the PowerNV machines
hw/ppc: Consolidate ppc440 initial mapping creation functions
hw/ppc: Consolidate e500 initial mapping creation functions
tests/qtest: Add XIVE tests for the powernv10 machine
pnv/xive2: TIMA CI ops using alternative offsets or byte lengths
pnv/xive2: TIMA support for 8-byte OS context push for PHYP
pnv/xive: Update PIPR when updating CPPR
pnv/xive: Add special handling for pool targets
ppc/xive2: Support "Pull Thread Context to Odd Thread Reporting Line"
ppc/xive2: Change context/ring specific functions to be generic
ppc/xive2: Support "Pull Thread Context to Register" operation
ppc/xive2: Allow 1-byte write of Target field in TIMA
ppc/xive2: Dump the VP-group and crowd tables with 'info pic'
ppc/xive2: Dump more NVP state with 'info pic'
pnv/xive2: Support for "OS LGS Push" TIMA operation
ppc/xive2: Support TIMA "Pull OS Context to Odd Thread Reporting Line"
pnv/xive2: Define OGEN field in the TIMA
pnv/xive: TIMA patch sets pre-req alignment and formatting changes
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add sPAPR CPU Core definition for Power11
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Tested-by: Amit Machhiwal <amachhiw@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
* Fix an access to VXSAT
* Expose RV32 cpu to RV64 QEMU
* Don't clear PLIC pending bits on IRQ lowering
* Make PLIC zeroth priority register read-only
* Set vtype.vill on CPU reset
* Check and update APLIC pending when write sourcecfg
* Avoid dropping charecters with HTIF
* Apply FIFO backpressure to guests using SiFive UART
* Support for control flow integrity extensions
* Support for the IOMMU with the virt machine
* set 'aia_mode' to default in error path
* clarify how 'riscv-aia' default works
-----BEGIN PGP SIGNATURE-----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=rPaa
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20241031-1' of https://github.com/alistair23/qemu into staging
RISC-V PR for 9.2
* Fix an access to VXSAT
* Expose RV32 cpu to RV64 QEMU
* Don't clear PLIC pending bits on IRQ lowering
* Make PLIC zeroth priority register read-only
* Set vtype.vill on CPU reset
* Check and update APLIC pending when write sourcecfg
* Avoid dropping charecters with HTIF
* Apply FIFO backpressure to guests using SiFive UART
* Support for control flow integrity extensions
* Support for the IOMMU with the virt machine
* set 'aia_mode' to default in error path
* clarify how 'riscv-aia' default works
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmci/tQACgkQr3yVEwxT
# gBNPAQ//dZKjjJm4Sh+UFdUslivBJYtL1rl2UUG2UqiNn/UoYh/vcHoSArljHTjt
# 8riEStnaQqXziOpMIJjIMLJ4KoiIk2SMvjNfFtcmPiPZEDEpjsTxfUxBFsBee+fI
# 4KNQKKFeljq4pa+VzVvXEqzCNJIzCThFXTZhZmer00M91HPA8ZQIHpv2JL1sWlgZ
# /HW24XEDFLGc/JsR55fxpPftlAqP+BfOrqMmbWy7x2Y+G8WI05hM2zTP/W8pnIz3
# z0GCRYSBlADtrp+3RqzTwQfK5pXoFc0iDktWVYlhoXaeEmOwo8IYxTjrvBGhnBq+
# ySX1DzTa23QmOIxSYYvCRuOxyOK9ziNn+EQ9FiFBt1h1o251CYMil1bwmYXMCMNJ
# rZwF1HfUx0g2GQW1ZOqh1eeyLO29JiOdV3hxlDO7X4bbISNgU6il5MXmnvf0/XVW
# Af3YhALeeDbHgHL1iVfjafzaviQc9+YrEX13eX6N2AjcgE5a3F7XNmGfFpFJ+mfQ
# CPgiwVBXat6UpBUGAt14UM+6wzp+crSgQR5IEGth+mKMKdkWoykvo7A2oHdu39zn
# 2cdzsshg2qcLLUPTFy06OOTXX382kCWXuykhHOjZ4uu2SJJ7R0W3PlYV8HSde2Vu
# Rj+89ZlUSICJNXXweQB39r87hNbtRuDIO22V0B9XrApQbJj6/yE=
# =rPaa
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 31 Oct 2024 03:51:48 GMT
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20241031-1' of https://github.com/alistair23/qemu: (50 commits)
target/riscv: Fix vcompress with rvv_ta_all_1s
target/riscv/kvm: clarify how 'riscv-aia' default works
target/riscv/kvm: set 'aia_mode' to default in error path
docs/specs: add riscv-iommu
qtest/riscv-iommu-test: add init queues test
hw/riscv/riscv-iommu: add DBG support
hw/riscv/riscv-iommu: add ATS support
hw/riscv/riscv-iommu: add Address Translation Cache (IOATC)
test/qtest: add riscv-iommu-pci tests
hw/riscv/virt.c: support for RISC-V IOMMU PCIDevice hotplug
hw/riscv: add riscv-iommu-pci reference device
pci-ids.rst: add Red Hat pci-id for RISC-V IOMMU device
hw/riscv: add RISC-V IOMMU base emulation
hw/riscv: add riscv-iommu-bits.h
exec/memtxattr: add process identifier to the transaction attributes
target/riscv: Expose zicfiss extension as a cpu property
disas/riscv: enable disassembly for compressed sspush/sspopchk
disas/riscv: enable disassembly for zicfiss instructions
target/riscv: compressed encodings for sspush and sspopchk
target/riscv: implement zicfiss instructions
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a simple guideline to use the existing RISC-V IOMMU support we just
added.
This doc will be updated once we add the riscv-iommu-sys device.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241016204038.649340-13-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We are currently lacking a declared maintainer for the sub-system so
while we look for one I'm merging after testing locally.
- convert some fprintfs to proper trace events
- move timers used by GL devices into GL structures
- handle virtio_gpu_virgl_init() failure better
- implement unrealize for GL devices
- use virgl version numbering to gate features
- support context-init feature
- don't require udmabuf for virgl only
- add virgl resource tracker
- allow command submission to be suspended
- handle resource blob commands
- dynamically handle capabilit sets
- add venus context support for passing vulkan
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmcg0FsACgkQ+9DbCVqe
KkT86Qf/RtQuzIl+y60BeXdBLqjpLbS2WY3pk49068o+ZyUccNhMLzfL/Pd2Iz7t
nW/4kI0lkobsPeKGLJchJQzWgEbFTD3KvYz9r8Ywugoy6FquMUptkSHcH8ggKZwT
oJ0wT2jNS7UjgcJjnlQ8WaP/EH8qPI/0+e6W6RlcTE1sIxpJ6zHfMnHi4RUayGz7
P9JYbOrMO2bHWBrdfQXIJaUVSLvy44j9V4u6OCCLPfDvr5RwzPXFv1YmTRpW14Zu
P+iuxdUjRuhUQDMSKIbrzfHOFLg4iUchMgyd2pnVFjU6zOyA+yKWDxfPO0K0AbHh
FddMYgP5K7IrgaUc6mI0w2/RCuLJvw==
=mSAL
-----END PGP SIGNATURE-----
Merge tag 'pull-virtio-gpu-vulkan-291024-1' of https://gitlab.com/stsquad/qemu into staging
virtio-gpu: add venus/vulkan capability
We are currently lacking a declared maintainer for the sub-system so
while we look for one I'm merging after testing locally.
- convert some fprintfs to proper trace events
- move timers used by GL devices into GL structures
- handle virtio_gpu_virgl_init() failure better
- implement unrealize for GL devices
- use virgl version numbering to gate features
- support context-init feature
- don't require udmabuf for virgl only
- add virgl resource tracker
- allow command submission to be suspended
- handle resource blob commands
- dynamically handle capabilit sets
- add venus context support for passing vulkan
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmcg0FsACgkQ+9DbCVqe
# KkT86Qf/RtQuzIl+y60BeXdBLqjpLbS2WY3pk49068o+ZyUccNhMLzfL/Pd2Iz7t
# nW/4kI0lkobsPeKGLJchJQzWgEbFTD3KvYz9r8Ywugoy6FquMUptkSHcH8ggKZwT
# oJ0wT2jNS7UjgcJjnlQ8WaP/EH8qPI/0+e6W6RlcTE1sIxpJ6zHfMnHi4RUayGz7
# P9JYbOrMO2bHWBrdfQXIJaUVSLvy44j9V4u6OCCLPfDvr5RwzPXFv1YmTRpW14Zu
# P+iuxdUjRuhUQDMSKIbrzfHOFLg4iUchMgyd2pnVFjU6zOyA+yKWDxfPO0K0AbHh
# FddMYgP5K7IrgaUc6mI0w2/RCuLJvw==
# =mSAL
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 29 Oct 2024 12:08:59 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-virtio-gpu-vulkan-291024-1' of https://gitlab.com/stsquad/qemu:
virtio-gpu: Support Venus context
virtio-gpu: Register capsets dynamically
virtio-gpu: Handle resource blob commands
virtio-gpu: Support suspension of commands processing
virtio-gpu: Add virgl resource management
virtio-gpu: Don't require udmabuf when blobs and virgl are enabled
virtio-gpu: Support context-init feature with virglrenderer
virtio-gpu: Use pkgconfig version to decide which virgl features are available
virtio-gpu: Unrealize GL device
virtio-gpu: Handle virtio_gpu_virgl_init() failure
virtio-gpu: Move print_stats timer to VirtIOGPUGL
virtio-gpu: Move fence_poll timer to VirtIOGPUGL
virtio-gpu: Use trace events for tracking number of in-flight fences
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We now have at least placeholder documentation for every Arm board,
so we can remove the apologetic note that says that there are
undocumented ones which you can only find out about via the
``--machine help`` option.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20241018141332.942844-8-peter.maydell@linaro.org
Add placeholder docs for the mcimx6ul-evk and mcimx7d-sabre boards.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20241018141332.942844-7-peter.maydell@linaro.org
Add a placeholder doc for the xlnx-zcu102 board.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20241018141332.942844-6-peter.maydell@linaro.org
Add a placeholder doc for the exynos4 boards nuri and smdkc210.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-id: 20241018141332.942844-5-peter.maydell@linaro.org
The fby35 machine is not implemented in hw/arm/aspeed.c,
but its documentation is currently stuck at the end of aspeed.rst,
formatted in a way that it gets its own heading in the top-level
list of boards in target-arm.html.
We don't have any other boards that we document like this; split it
out into its own rst file. This improves consistency with other
board docs and means we can have the entry in the target-arm
list be in the correct alphabetical order.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-id: 20241018141332.942844-4-peter.maydell@linaro.org
We have two Arm board doc files which both use '*-bmc' in their
documentation title. The result is that when you read the
table of contents in system/target-arm.html you don't know
which boards are covered by which file.
Expand out the board names entirely in the document titles.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-id: 20241018141332.942844-3-peter.maydell@linaro.org
List the olimex-stm32-h405 board in the document title, so that the
board name appears in the table of contents in system/target-arm.rst.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-id: 20241018141332.942844-2-peter.maydell@linaro.org
The example of how to do vCPU hotplug and hot-unlpug in the
cpu-hotplug documentation no longer works, because the way we
allocate socket-id and core-id to CPUs by default has changed at some
point. The output also no longer matches what current QEMU produces
in some more cosmetic ways.
Update the example to match current QEMU. The differences are:
* the second CPU is now socket-id=0 core-id=1,
not socket-id=1 core-id=0
* the order of fields in QMP responses is now in alphabetical order
* the "arch" member is no longer present in the query-cpus-fast
output (it was removed in QEMU 6.0)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20241010131800.3210161-1-peter.maydell@linaro.org
Message-id: 20240819144303.37852-1-peter.maydell@linaro.org
Request Venus when initializing VirGL and if venus=true flag is set for
virtio-gpu-gl device.
Signed-off-by: Antonio Caggiano <antonio.caggiano@collabora.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Message-Id: <20241024210311.118220-14-dmitry.osipenko@collabora.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Change all related docs and tests to use the new 'reconnect-ms' option
instead of the now deprecated 'reconnect'.
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Update docs to show that s390x PC BIOS can support more than one boot device.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-19-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Remove the information about the separate s390-netboot.img from
the documentation.
Co-authored by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Message-ID: <20241020012953.1380075-7-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
While hyperv.rst already has all currently implemented Hyper-V
enlightenments documented, it may be unclear what is the recommended set to
achieve the best result. Add the corresponding section to the doc.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240917160051.2637594-5-vkuznets@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Windows with Hyper-V role enabled doesn't boot with 'hv-passthrough' when
no debugger is configured, this significantly limits the usefulness of the
feature as there's no support for subtracting Hyper-V features from CPU
flags at this moment (e.g. "-cpu host,hv-passthrough,-hv-syndbg" does not
work). While this is also theoretically fixable, 'hv-syndbg' is likely
very special and unneeded in the default set. Genuine Hyper-V doesn't seem
to enable it either.
Introduce 'skip_passthrough' flag to 'kvm_hyperv_properties' and use it as
one-off to skip 'hv-syndbg' when enabling features in 'hv-passthrough'
mode. Note, "-cpu host,hv-passthrough,hv-syndbg" can still be used if
needed.
As both 'hv-passthrough' and 'hv-syndbg' are debug features, the change
should not have any effect on production environments.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240917160051.2637594-3-vkuznets@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Allwinner A10 SPI controller is added to the Allwinner A10
description, so it is available when Cubieboard is emulated.
Update the documentation for Cubieboard to indicate SPI availability.
Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
Message-id: 20241001221349.8319-3-strahinja.p.jankovic@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
