The 64-bit hppa qemu emulation still fails to boot 64-bit HP-UX.
This patch series improves the emulation a lot, since it enables us to boot
64-bit HP-UX installer silently up until an endless loop where the machine
reports that it's up an running (it crashed before). This still needs further
analysis, but it's a big step forward.
Main changes to archieve this includes:
- Implementing diagnose registers (especially %dr2 for space-register hashing)
- a new SeaBIOS-hppa version 18, which includes those fixes and enhancements:
- Fix IRT table entries to use slot number
- Increase PCI alignment for memory bars to 64k
- Fix PDC_CACHE/PDC_CACHE_RET_SPID return value
- Allow up to 256 GB RAM on 64-bit machines
V2:
- fix linux-user build by adding missing "#ifndef CONFIG_USER_ONLY ... #endif"
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZ5yWTwAKCRD3ErUQojoP
X1p5AP4iSfKlBsUZrww2/M1ArqB9jZuJBO1kdZ7OcCN2Jn0yxgEAx0CPUof7NnZV
EY7u3Qq4E8ZnOk4XgHt06bsdNcJN+gc=
=RoAh
-----END PGP SIGNATURE-----
Merge tag 'hppa-system-mfdiag-for-v10-pull-request' of https://github.com/hdeller/qemu-hppa into staging
hppa 64-bit mfdiag improvements
The 64-bit hppa qemu emulation still fails to boot 64-bit HP-UX.
This patch series improves the emulation a lot, since it enables us to boot
64-bit HP-UX installer silently up until an endless loop where the machine
reports that it's up an running (it crashed before). This still needs further
analysis, but it's a big step forward.
Main changes to archieve this includes:
- Implementing diagnose registers (especially %dr2 for space-register hashing)
- a new SeaBIOS-hppa version 18, which includes those fixes and enhancements:
- Fix IRT table entries to use slot number
- Increase PCI alignment for memory bars to 64k
- Fix PDC_CACHE/PDC_CACHE_RET_SPID return value
- Allow up to 256 GB RAM on 64-bit machines
V2:
- fix linux-user build by adding missing "#ifndef CONFIG_USER_ONLY ... #endif"
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZ5yWTwAKCRD3ErUQojoP
# X1p5AP4iSfKlBsUZrww2/M1ArqB9jZuJBO1kdZ7OcCN2Jn0yxgEAx0CPUof7NnZV
# EY7u3Qq4E8ZnOk4XgHt06bsdNcJN+gc=
# =RoAh
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 31 Jan 2025 04:22:23 EST
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'hppa-system-mfdiag-for-v10-pull-request' of https://github.com/hdeller/qemu-hppa:
target/hppa: Update SeaBIOS-hppa to version 18
target/hppa: Implement space register hashing for 64-bit HP-UX
target/hppa: 64-bit CPUs start with space register hashing enabled
target/hppa: Add instruction decoding for mfdiag and mtdiag
target/hppa: Drop diag_getshadowregs_pa2 and diag_putshadowregs_pa2
target/hppa: Add CPU diagnose registers
disas/hppa: implement mfdiag/mtdiag disassembly
hppa: Sync contents of hppa_hardware.h header file with SeaBIOS-hppa
MAINTAINERS: Add myself as HPPA maintainer
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now that sd_enable() has been removed, SD::enable is set to true in
sd_instance_init() and then never changed. So we can remove it.
Note that the VMSTATE_UNUSED() size argument should be '1', not
'sizeof(bool)', as noted in the CAUTION comment in vmstate.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250128104519.3981448-12-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The sdcard_legacy.h header defines function prototypes for the "legacy"
SD card API, which was used by non-qdevified SD controller models.
We've now converted the only remaining non-qdev SD controller, so
we can drop the legacy API.
Entirely unused functions:
sd_init(), sd_set_cb(), sd_enable()
Functions which now become static inside sd.c (they are the
underlying implementations of methods on SDCardClass):
sd_do_command(), sd_write_byte(), sd_read_byte()
Removal of sd_init() means that we can also remove the
me_no_qdev_me_kill_mammoth_with_rocks flag, the codepaths that were
only reachable when it was set, and the inserted_cb and readonly_cb
qemu_irq lines that went with that.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20250128104519.3981448-11-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The SDCardClass has an 'enable' method, but nothing actually invokes it.
The underlying implementation is sd_enable(), which is documented
in sdcard_legacy.h as something that should not be used and was only
present for the benefit of the now-removed nseries boards. Unlike
all the other method pointers in SDCardClass, this one doesn't have
an sdbus_foo() function wrapper in hw/sd/core.c.
Remove the unused method.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250128104519.3981448-10-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This is a very old source file, and still has some lingering
hard-coded tabs; untabify it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250128104519.3981448-9-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The coverswitch qemu_irq is never connected to anything, and the only thing
we do with it is set it in omap_mmc_reset(). Remove it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250128104519.3981448-8-peter.maydell@linaro.org>
[PMD: Remove unused 'coverswitch' field]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Our style for other conversions of OMAP devices to qdev has been to
inline the creation and wiring into omap310_mpu_init() -- see for
instance the handling of omap-intc, omap-gpio and omap_i2c. Do
the same for omap-mmc.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250128104519.3981448-7-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The approach we've settled on for handling the omap_clk wiring for
OMAP devices converted to QDev is to have a function omap_foo_set_clk()
whose implementation just sets the field directly in the device's
state struct. (See the "TODO" comment near the top of omap.h.)
Make omap_mmc do the same.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250128104519.3981448-6-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Convert the OMAP MMC controller to the new SDBus API:
* the controller creates an SDBus bus
* instead of sd_foo functions on the SDState object, call
sdbus_foo functions on the SDBus
* the board code creates a proper TYPE_SD_CARD object and attaches
it to the controller's SDBus, instead of the controller creating
a card directly via sd_init() that never gets attached to any bus
* because the SD card object is on a bus, it gets reset automatically
by the "traverse the qbus tree resetting things" code, and we don't
need to manually reset the card from the controller reset function
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250128104519.3981448-5-peter.maydell@linaro.org>
[PMD: Include "hw/sd/sd.h" instead of "hw/sd/sdcard_legacy.h",
create bus in omap_mmc_initfn() instead of omap_mmc_realize()]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The omap_mmc device has three outbound qemu_irq lines:
* one actual interrupt line
* two which connect to the DMA controller and are signalled for
TX and RX DMA
Convert these to a sysbus IRQ and two named GPIO outputs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250128104519.3981448-4-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Mechanically convert the remaining uses of 'struct omap_mmc_s' to
'OMAPMMCState'.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250128104519.3981448-3-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Do a minimal conversion of the omap_mmc device model to QDev.
In this commit we do the bare minimum to produce a working device:
* add the SysBusDevice parent_obj and the usual type boilerplate
* omap_mmc_init() now returns a DeviceState*
* reset is handled by sysbus reset, so the SoC reset function
doesn't need to call omap_mmc_reset() any more
* code that should obviously be in init/realize is moved there
from omap_mmc_init()
We leave various pieces of cleanup to later commits:
* rationalizing 'struct omap_mmc_s *' to 'OMAPMMCState *'
* using gpio lines rather than having omap_mmc_init() directly
set s->irq, s->dma
* switching away from the legacy SD API and instead having
the SD card plugged into a bus
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250128104519.3981448-2-peter.maydell@linaro.org>
[PMD: Do not add omap_mmc_realize()]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Rather than passing a boolean 'is_big_endian' argument,
directly pass the ELFDATA, which can be unspecified using
the ELFDATANONE value.
Update the call sites:
0 -> ELFDATA2LSB
1 -> ELFDATA2MSB
TARGET_BIG_ENDIAN -> TARGET_BIG_ENDIAN ? ELFDATA2MSB : ELFDATA2LSB
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250127113824.50177-7-philmd@linaro.org>
Rather than passing a boolean 'is_big_endian' argument,
directly pass the ELFDATA, which can be unspecified using
the ELFDATANONE value.
Update the call sites:
0 -> ELFDATA2LSB
1 -> ELFDATA2MSB
Note, this allow removing the target_words_bigendian() call
in the GENERIC_LOADER device, where we pass ELFDATANONE.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250127113824.50177-6-philmd@linaro.org>
Rather than passing a boolean 'is_big_endian' argument,
directly pass the ELFDATA, which can be unspecified using
the ELFDATANONE value.
Update the call sites:
0 -> ELFDATA2LSB
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250127113824.50177-5-philmd@linaro.org>
Last use of load_elf_ram() was removed in commit 188e255bf8
("hw/s390x: Remove the possibility to load the s390-netboot.img
binary"), remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20250127113824.50177-3-philmd@linaro.org>
load_elf_ram_sym() with load_rom=true, sym_cb=NULL is
equivalent to load_elf_as(). Replace by the latter to
simplify.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250127113824.50177-2-philmd@linaro.org>
The variable is uint64_t so needs %PRIu64 instead of %d.
Fixes: 3ae7eb88c4 ("ehci: fix overflow in frame timer code")
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250124124713.64F8C4E6031@zero.eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This has been useful when debugging and unsure if the guest is
generating i2c traffic.
Signed-off-by: Titus Rwantare <titusr@google.com>
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250121105935.3069035-1-titusr@google.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
There are a fixed number of PCI IRQs, known beforehand.
Allocate them within PCIMultiSerialState, and initialize
using qemu_init_irq(), allowing to remove the legacy
qemu_allocate_irqs() and qemu_free_irqs() calls.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250121182828.45088-1-philmd@linaro.org>
The FPGA exposes a fixed set of IRQs. Hold them in the FPGA
state and initialize them in place calling qemu_init_irqs().
Move r2d_fpga_irq enums earlier so we can use NR_IRQS within
the r2d_fpga_t structure. r2d_fpga_init() returns r2d_fpga_t,
and we dereference irq from it in r2d_init().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250121182445.35309-1-philmd@linaro.org>
No need to dynamically allocate IRQ when we know before hands
how many we'll use. Declare the 2 of them in IPackDevice state
and initialize them in the DeviceRealize handler.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250121155526.29982-4-philmd@linaro.org>
Split IPACK Kconfig key as {IPACK, TPCI200, IP_OCTAL_232}
- IPack is a bus
- TPCI200 is a PCI device providing an IPack bus
- IP-Octal232 is an IPack device plugged on an IPack bus
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Fabiano Rosas <farosas@suse.de>
Message-Id: <20250121155526.29982-3-philmd@linaro.org>
While qemu_init_irq() initialize a single IRQ,
qemu_init_irqs() initialize an array of them.
Suggested-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250121155526.29982-2-philmd@linaro.org>
loongson3_bootp.c doesn't contain any target-specific code
and can be build generically, move it to common_ss[].
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250115232952.31166-12-philmd@linaro.org>
Propagate %processor_id from mips_loongson3_virt_init() where
we have a reference to the first vCPU, so use it instead of
the &first_cpu global.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250115232952.31166-11-philmd@linaro.org>
Remove one &first_cpu use in hw/mips/loongson3_bootp.c.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250115232952.31166-10-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250115232952.31166-9-philmd@linaro.org>
Remove one use of the 'current_machine' global.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250115232952.31166-8-philmd@linaro.org>
Propagate the %cpu_count from the machine file, allowing
to remove the "hw/boards.h" dependency (which is machine
specific) from loongson3_bootp.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250115232952.31166-7-philmd@linaro.org>
MemMapEntry is declared in "exec/hwaddr.h", cpu_to_le32() in
"qemu/bswap.h". These headers are indirectly included via "cpu.h".
Include them explicitly in order to avoid when removing "cpu.h":
In file included from ../../hw/mips/loongson3_bootp.c:27:
hw/mips/loongson3_bootp.h:234:14: error: unknown type name 'MemMapEntry'
234 | extern const MemMapEntry virt_memmap[];
| ^
hw/mips/loongson3_bootp.c:33:18: error: call to undeclared function 'cpu_to_le32'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
33 | c->cputype = cpu_to_le32(Loongson_3A);
| ^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250115232952.31166-6-philmd@linaro.org>
Pass the first vCPU as argument, allowing to remove
another &first_cpu global use.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250115232952.31166-5-philmd@linaro.org>
'loaderparams' is declared statically. Let fw_conf_init()
access its 'cpu_freq' and 'ram_size' fields.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250115232952.31166-4-philmd@linaro.org>
Create vCPUs from the last one to the first one.
No need to use the &first_cpu global since we already
have it referenced.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20250115232952.31166-3-philmd@linaro.org>
main_cpu_reset() is misleadingly named "main": it resets
all vCPUs, with a special case for the first vCPU.
Factor generic_cpu_reset() out of main_cpu_reset(),
allowing to remove one &first_cpu use.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250115232952.31166-2-philmd@linaro.org>
rx_gdbsim_init() has access to the single CPU via:
RxGdbSimMachineState {
RX62NState {
RXCPU cpu;
...
} mcu;
} s;
Directly use that instead of the &first_cpu global.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250110180442.82687-1-philmd@linaro.org>
* Fix the broken aarch64_tcg_plugins test
* Add test for 64-bit mac99 machine
* Add a Linux-based test for the 40p machine
* Fix issues with record/replay of some s390x instructions
* Fix node.js crashes on emulated s390x due to a bug in the MVC instruction
* Enable virtio-balloon-pci and virtio-mem-pci on s390x
* Fix a libslirp v4.9.0 compilation problem
-----BEGIN PGP SIGNATURE-----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=rEzl
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2025-01-30' of https://gitlab.com/thuth/qemu into staging
* Convert more avocado tests to the functional framework
* Fix the broken aarch64_tcg_plugins test
* Add test for 64-bit mac99 machine
* Add a Linux-based test for the 40p machine
* Fix issues with record/replay of some s390x instructions
* Fix node.js crashes on emulated s390x due to a bug in the MVC instruction
* Enable virtio-balloon-pci and virtio-mem-pci on s390x
* Fix a libslirp v4.9.0 compilation problem
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmebewIRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbUfZQ//WHrZNVQNe0d+wOtAa5Zj4X9RpadHeGO9
# WCKtBWZ1tDADHiVkZzU6L6q/LYM5FcAOE+Kah/xr8rtf6he+LCYQ0RDHbgY6/oUE
# t9TkIeph59+MMvBXWJ8flngaoVtxe8l2aYem8wk3ATPZtHyMQAZ5PAjY3+WYQAGc
# gm13k1AMD4mA6mBUOs67QSitTqBQsunKpb1IvpyBjtv9NBl61L8h5hWn0bsxa8yC
# 3KKZhw6Nclc8RVe33e6ZDrHrBi9klORd6Z+7fJ4w8Yj+C48ogfbQx+Zvb82jXhRe
# 2qGdVb6cF7LVQ5D3pECBK7yo4Lkd7MYnNvn+EmbTXhj1y5MSPdokP6k0ZWkhhkCP
# 2kIY0o5tFipdxkdDpCptU3gYJLdQFbNX2MqDFY0KeurLDGe4o6jIoRNmdZ67TJei
# zleLlcEatoyRqpCKqTNMDVeWgza3ngykhiQIrG9PMPCRQET0N4qY6db35hzDujLI
# NVuI1traCLawfCDYiMnU59dOxWSHy1bwSfnUxhZ92+Fl3AOb6c6PzhpkIGl/grwT
# 8T8EcjFyA4hpaHHKjCeNgSrKt9N0Ka2G3l9oF8eWwJm4KAlwtYBDvfVb+juGBP9+
# 8gW0lXA8tYy/P5XgPQ0N5Z8coc1xUrYBhC7v70ud3ponMmmTdhRnosey2cOFUGsN
# /U7avgXIm0Q=
# =rEzl
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 30 Jan 2025 08:13:38 EST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2025-01-30' of https://gitlab.com/thuth/qemu:
net/slirp: libslirp 4.9.0 compatibility
tests/functional/test_mips_malta: Convert the mips big endian replay tests
tests/functional/test_mips64el_malta: Convert the mips64el replay tests
tests/functional/test_mipsel_malta: Convert the mipsel replay tests
tests/functional: Add the ReplayKernelBase class
tests/functional: Add a decorator for skipping long running tests
tests/functional: Extend PPC 40p test with Linux boot
s390x/s390-virtio-ccw: Support plugging PCI-based virtio memory devices
virtio-mem-pci: Allow setting nvectors, so we can use MSI-X
virtio-balloon-pci: Allow setting nvectors, so we can use MSI-X
hw/s390x/s390-virtio-ccw: Fix a record/replay deadlock
tests/tcg/s390x: Test modifying code using the MVC instruction
target/s390x: Fix MVC not always invalidating translation blocks
target/s390x: Fix PPNO execution with icount
tests/functional/test_mips_malta: Fix comment about endianness of the test
tests/functional: Add a ppc64 mac99 test
tests/functional: Fix the aarch64_tcg_plugins test
tests/functional: Convert the migration avocado test
tests/functional: Fix broken decorators with lamda functions
tests/functional/qemu_test/decorators: Fix bad check for imports
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
- Purge of ram_save_target_page_legacy
- Cleanups to postcopy, json writer, migration states
- New migration mode cpr-transfer
- Fix for a -Werror=maybe-uninitialized instance in savevm
-----BEGIN PGP SIGNATURE-----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=jwOI
-----END PGP SIGNATURE-----
Merge tag 'migration-20250129-pull-request' of https://gitlab.com/farosas/qemu into staging
Migration pull request
- Purge of ram_save_target_page_legacy
- Cleanups to postcopy, json writer, migration states
- New migration mode cpr-transfer
- Fix for a -Werror=maybe-uninitialized instance in savevm
# -----BEGIN PGP SIGNATURE-----
#
# iQJEBAABCAAuFiEEqhtIsKIjJqWkw2TPx5jcdBvsMZ0FAmeaT8EQHGZhcm9zYXNA
# c3VzZS5kZQAKCRDHmNx0G+wxndXrEACTT+rdoEvOsNs4nM2a67GjxUoQZVTAWn+8
# lYhhNZLA4E+qHwpHTDCwyfyvCe615r72+bF7QO1KTrYeXGJg4SPk5kbEhCDqqjEu
# SGqrlPwkC1x3WkTvb228iDddDQ8dccko3Sy6wAyz0o8dtp5p4iK+57qzB/84u94L
# y3zQ+owOo9OLnXgdfMpN99HGQSvPR7CbP/2L293IrMCuPDUo9XhI7ARNS/phbT3Z
# aDl10WGHKz1SJWOkPj137E6+xMKuCmOZDTufTcTaHfyliD04JRWgEZVnKJxKJDxd
# 9e+lzHvXuYfO7YO11fr7DttPRnLEfjipELVTxrudM92eZ95XwdL4+ggfBTGHt76P
# yFUrp7G8qsUjWd+DHPmoo6Gx71zPbE6v9J2NMn2/1k4WdPOYy7HTmDgCkRirRTvV
# irYkHtdSFFsj3c0g4P4mhOzXnvUkGXzgrjteM5hlLy3bjSeZz9VMZADjiGqFGVPb
# 6euPcLLa9oynkoP5UXmFd/9PjWcgnfIbQu2MVlIyWhjvTGZKSGecVZmH5pWTJuBV
# xCbab1jYprRFpUIAMo94rgvRQRosomS1+GjGndFkX5++dTTlFSqpDLSGcEnPSGRx
# o9n+IldNiqh2vjN1bj60pLfmrHN/F+hsGTsDJlW+kfeyBXBkGArg1rDjN5ae7GvD
# UZK0N+OG0g==
# =jwOI
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 29 Jan 2025 10:56:49 EST
# gpg: using RSA key AA1B48B0A22326A5A4C364CFC798DC741BEC319D
# gpg: issuer "farosas@suse.de"
# gpg: Good signature from "Fabiano Rosas <farosas@suse.de>" [unknown]
# gpg: aka "Fabiano Almeida Rosas <fabiano.rosas@suse.com>" [unknown]
# gpg: WARNING: The key's User ID is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: AA1B 48B0 A223 26A5 A4C3 64CF C798 DC74 1BEC 319D
* tag 'migration-20250129-pull-request' of https://gitlab.com/farosas/qemu: (42 commits)
migration: refactor ram_save_target_page functions
migration: Trivial cleanup on JSON writer of vmstate_save()
migration: Merge precopy/postcopy on switchover start
migration: Always set DEVICE state
migration: Cleanup qemu_savevm_state_complete_precopy()
migration: Unwrap qemu_savevm_state_complete_precopy() in postcopy
migration: Notify COMPLETE once for postcopy
migration: Take BQL slightly longer in postcopy_start()
migration: Drop cached migration state in migration_maybe_pause()
migration: Adjust locking in migration_maybe_pause()
migration: Adjust postcopy bandwidth during switchover
migration: Synchronize all CPU states only for non-iterable dump
migration: Drop inactivate_disk param in qemu_savevm_state_complete*
migration: Avoid two src-downtime-end tracepoints for postcopy
migration: Optimize postcopy on downtime by avoiding JSON writer
migration: Do not construct JSON description if suppressed
migration: Remove postcopy implications in should_send_vmdesc()
migration: cpr-transfer documentation
migration-test: cpr-transfer
tests/qtest: assert qmp connected
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The hppa_hardware.h header file holds many constants for addresses and
offsets which are needed while building the firmware (SeaBIOS-hppa) and
while setting up the virtual machine in QEMU.
This patch brings it in sync between both source code repositories.
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Per [*]:
"we're only interested in adopting SPDX for recording the
licensing info, [not] any other SPDX metadata."
Replace the 'SPDX-FileCopyrightText' and 'SPDX-FileContributor'
tags added by Linaro by 'Copyright (c)' and 'Authors' words
respectively.
[*] https://lore.kernel.org/qemu-devel/20241007154548.1144961-4-berrange@redhat.com/
Inspired-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Let's just wire it up, unlocking virtio-mem-pci support on s390x.
While at it, drop the "return;" in s390_machine_device_unplug_request(),
to make it look like the other handlers.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-ID: <20250128185705.1609038-3-david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let's do it similar as virtio-balloon-pci. With this change, we can
use virtio-mem-pci on s390x, although plugging will still fail until
properly wired up in the machine.
No need to worry about transitional/non_transitional devices, because they
don't exist for virtio-mem.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20250128185705.1609038-2-david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Most virtio-pci devices allow MSI-X. Add it to virtio-balloon-pci, but
only enable it in new machine types, so we don't break migration of
existing machine types between different qemu versions.
This copies what was done for virtio-rng-pci in:
9ea02e8f13 ("virtio-rng-pci: Allow setting nvectors, so we can use MSI-X")
bad9c5a516 ("virtio-rng-pci: fix migration compat for vectors")
62bdb88715 ("virtio-rng-pci: fix transitional migration compat for vectors")
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Reza Arbab <arbab@linux.ibm.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Message-ID: <20250115161425.246348-1-arbab@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Booting an s390x VM in record/replay mode hangs due to a deadlock
between rr_cpu_thread_fn() and s390_machine_reset(). The former needs
the record/replay mutex held by the latter, and the latter waits until
the former completes its run_on_cpu() request.
Fix by temporarily dropping the record/replay mutex, like it's done in
pause_all_vcpus().
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20250124112625.23050-1-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* hw/arm: Remove various uses of first_cpu global
* hw/char/imx_serial: Fix reset value of UFCR register
* hw/char/imx_serial: Update all state before restarting ageing timer
* hw/pci-host/designware: Expose MSI IRQ
* hw/arm/stellaris: refactoring, cleanup
* hw/arm/stellaris: map both I2C controllers
* tests/functional: Add a test for the arm microbit machine
* target/arm: arm_reset_sve_state() should set FPSR, not FPCR
* target/arm: refactorings preparatory to FEAT_AFP implementation
* fpu: Rename float_flag_input_denormal to float_flag_input_denormal_flushed
* fpu: Rename float_flag_output_denormal to float_flag_output_denormal_flushed
* hw/usb/canokey: Fix buffer overflow for OUT packet
-----BEGIN PGP SIGNATURE-----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=H4p7
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20250128-1' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* hw/arm: Remove various uses of first_cpu global
* hw/char/imx_serial: Fix reset value of UFCR register
* hw/char/imx_serial: Update all state before restarting ageing timer
* hw/pci-host/designware: Expose MSI IRQ
* hw/arm/stellaris: refactoring, cleanup
* hw/arm/stellaris: map both I2C controllers
* tests/functional: Add a test for the arm microbit machine
* target/arm: arm_reset_sve_state() should set FPSR, not FPCR
* target/arm: refactorings preparatory to FEAT_AFP implementation
* fpu: Rename float_flag_input_denormal to float_flag_input_denormal_flushed
* fpu: Rename float_flag_output_denormal to float_flag_output_denormal_flushed
* hw/usb/canokey: Fix buffer overflow for OUT packet
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmeZOi0ZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3sUeEACwDhM4ldn/gVZgVN7nf42a
# /CLD/qJx1vqi5bAB5zkY1bSCR9hS2IkhTBoQQH9Ng6ztG1IRpT/tKXDJAemWty70
# XgExdl4yjdwXMQK4JKU9qSfaBTuX7Z8Hz+nA1AnblO/4H+XpVNVJzp8Ee/uWTyEd
# BKPBpwqbIXNwUWEqkzDok074Q05rHlhsJD2DsoJTcmtpROhLHLATwQDZGGFuf56H
# LVcdx6GRP+/mWEGWLtj19mvaR/2cn4rQf+I1MACZ81nRjQCHbCohNAMr2wFsKg1+
# 2jYk9uHdFoambJ5+mFuC55Efk+QJaP4vDR0Gf3jLloFr+rS/5h3HiUuD8dUWOwFd
# mPWXsjwYzqBW2knt1nfq1ByzYWZ8rVQEn5G53dX/eoNXuDGsonZxPnevgmv5kIUc
# /W618Jez1nu9RDtNKccobHEtTGlGInJxJ7YzkU7Q6FO80IAqSdV7t9v7uPLJwcnz
# nQz+wVzb4oOmwMzn3BpKY7N/S7IZOSy3ASNHj8o4yCHMJT8Ki0/N4bl0k0DLxJ0T
# RiNCsV9c7MJfo9a+pbOnu0Lc3SjjropdvHYU+bB7R0mgd8ysN+Tou0dpa+i7tUTu
# DHWqs2/+UApHKBiC+DSynPjjRR2aT/5lYFncGaiEVoEQttPLka3SAzgHPVQZs1zD
# bxZkEAFktAFGIjU70fYNkg==
# =H4p7
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 28 Jan 2025 15:12:29 EST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* tag 'pull-target-arm-20250128-1' of https://git.linaro.org/people/pmaydell/qemu-arm: (36 commits)
hw/usb/canokey: Fix buffer overflow for OUT packet
target/arm: Use FPST_A64_F16 for halfprec-to-other conversions
target/arm: Remove redundant advsimd float16 helpers
fpu: Fix a comment in softfloat-types.h
fpu: Rename float_flag_output_denormal to float_flag_output_denormal_flushed
fpu: Rename float_flag_input_denormal to float_flag_input_denormal_flushed
target/arm: Remove now-unused vfp.fp_status_f16 and FPST_FPCR_F16
target/arm: Use FPST_A64_F16 in A64 decoder
target/arm: Use FPST_A32_F16 in A32 decoder
target/arm: Use fp_status_f16_a64 in AArch64-only helpers
target/arm: Use fp_status_f16_a32 in AArch32-only helpers
target/arm: Define new fp_status_f16_a32 and fp_status_f16_a64
target/arm: Remove now-unused vfp.fp_status and FPST_FPCR
target/arm: Use FPST_A64 in A64 decoder
target/arm: Use FPST_A32 in A32 decoder
target/arm: Use fp_status_a32 in vfp_cmp helpers
target/arm: Use fp_status_a32 in vjvct helper
target/arm: Use fp_status_a64 or fp_status_a32 in is_ebf()
target/arm: Use vfp.fp_status_a64 in A64-only helper functions
target/arm: Define new fp_status_a32 and fp_status_a64
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Allocate auxilliary guest RAM as an anonymous file that is shareable
with an external process. This option applies to memory allocated as
a side effect of creating various devices. It does not apply to
memory-backend-objects, whether explicitly specified on the command
line, or implicitly created by the -m command line option.
This option is intended to support new migration modes, in which the
memory region can be transferred in place to a new QEMU process, by sending
the memfd file descriptor to the process. Memory contents are preserved,
and if the mode also transfers device descriptors, then pages that are
locked in memory for DMA remain locked. This behavior is a pre-requisite
for supporting vfio, vdpa, and iommufd devices with the new modes.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/1736967650-129648-7-git-send-email-steven.sistare@oracle.com
Signed-off-by: Fabiano Rosas <farosas@suse.de>
When USBPacket in OUT direction has larger payload
than the ep_out_buffer (of size 512), a buffer overflow
would occur.
It could be fixed by limiting the size of usb_packet_copy
to be at most buffer size. Further optimization gets rid
of the ep_out_buffer and directly uses ep_out as the target
buffer.
This is reported by a security researcher who artificially
constructed an OUT packet of size 2047. The report has gone
through the QEMU security process, and as this device is for
testing purpose and no deployment of it in virtualization
environment is observed, it is triaged not to be a security bug.
Cc: qemu-stable@nongnu.org
Fixes: d7d3491855 ("hw/usb: Add CanoKey Implementation")
Reported-by: Juan Jose Lopez Jaimez <thatjiaozi@gmail.com>
Signed-off-by: Hongren Zheng <i@zenithal.me>
Message-id: Z4TfMOrZz6IQYl_h@Sun
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
