QAPI's 'prefix' feature can make the connection between enumeration
type and its constants less than obvious. It's best used with
restraint.
QCryptoRSAPaddingAlgorithm has a 'prefix' that overrides the generated
enumeration constants' prefix to QCRYPTO_RSA_PADDING_ALG.
We could simply drop 'prefix', but then the prefix becomes
QCRYPTO_RSA_PADDING_ALGORITHM, which is rather long.
We could additionally rename the type to QCryptoRSAPaddingAlg, but I
think the abbreviation "alg" is less than clear.
Rename the type to QCryptoRSAPaddingAlgo instead. The prefix becomes
QCRYPTO_RSA_PADDING_ALGO.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240904111836.3273842-16-armbru@redhat.com>
QAPI's 'prefix' feature can make the connection between enumeration
type and its constants less than obvious. It's best used with
restraint.
QCryptoAkCipherAlgorithm has a 'prefix' that overrides the generated
enumeration constants' prefix to QCRYPTO_AKCIPHER_ALG.
We could simply drop 'prefix', but then the prefix becomes
QCRYPTO_AK_CIPHER_ALGORITHM, which is rather long.
We could additionally rename the type to QCryptoAkCipherAlg, but I
think the abbreviation "alg" is less than clear.
Rename the type to QCryptoAkCipherAlgo instead. The prefix becomes
QCRYPTO_AK_CIPHER_ALGO.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240904111836.3273842-15-armbru@redhat.com>
QAPI's 'prefix' feature can make the connection between enumeration
type and its constants less than obvious. It's best used with
restraint.
QCryptoIVGenAlgorithm has a 'prefix' that overrides the generated
enumeration constants' prefix to QCRYPTO_IVGEN_ALG.
We could simply drop 'prefix', but then the prefix becomes
QCRYPTO_IV_GEN_ALGORITHM, which is rather long.
We could additionally rename the type to QCryptoIVGenAlg, but I think
the abbreviation "alg" is less than clear.
Rename the type to QCryptoIVGenAlgo instead. The prefix becomes
QCRYPTO_IV_GEN_ALGO.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240904111836.3273842-14-armbru@redhat.com>
QAPI's 'prefix' feature can make the connection between enumeration
type and its constants less than obvious. It's best used with
restraint.
QCryptoCipherAlgorithm has a 'prefix' that overrides the generated
enumeration constants' prefix to QCRYPTO_CIPHER_ALG.
We could simply drop 'prefix', but then the prefix becomes
QCRYPTO_CIPHER_ALGORITHM, which is rather long.
We could additionally rename the type to QCryptoCipherAlg, but I think
the abbreviation "alg" is less than clear.
Rename the type to QCryptoCipherAlgo instead. The prefix becomes
QCRYPTO_CIPHER_ALGO.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240904111836.3273842-13-armbru@redhat.com>
QAPI's 'prefix' feature can make the connection between enumeration
type and its constants less than obvious. It's best used with
restraint.
QCryptoHashAlgorithm has a 'prefix' that overrides the generated
enumeration constants' prefix to QCRYPTO_HASH_ALG.
We could simply drop 'prefix', but then the prefix becomes
QCRYPTO_HASH_ALGORITHM, which is rather long.
We could additionally rename the type to QCryptoHashAlg, but I think
the abbreviation "alg" is less than clear.
Rename the type to QCryptoHashAlgo instead. The prefix becomes to
QCRYPTO_HASH_ALGO.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240904111836.3273842-12-armbru@redhat.com>
[Conflicts with merge commit 7bbadc60b5 resolved]
QAPI's 'prefix' feature can make the connection between enumeration
type and its constants less than obvious. It's best used with
restraint.
QCryptoAkCipherKeyType has a 'prefix' that overrides the generated
enumeration constants' prefix to QCRYPTO_AKCIPHER_KEY_TYPE.
Drop it. The prefix becomes QCRYPTO_AK_CIPHER_KEY_TYPE.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240904111836.3273842-11-armbru@redhat.com>
Recent commit "qapi: Smarter camel_to_upper() to reduce need for
'prefix'" added two temporary 'prefix' to delay changing the generated
code.
Revert them. This improves QCryptoBlockFormat's generated enumeration
constant prefix from Q_CRYPTO_BLOCK_FORMAT to QCRYPTO_BLOCK_FORMAT,
and QCryptoBlockLUKSKeyslotState's from
Q_CRYPTO_BLOCKLUKS_KEYSLOT_STATE to QCRYPTO_BLOCK_LUKS_KEYSLOT_STATE.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240904111836.3273842-6-armbru@redhat.com>
Recent commit "qapi: Smarter camel_to_upper() to reduce need for
'prefix'" added a temporary 'prefix' to delay changing the generated
code.
Revert it. This changes TestUnionEnumA's generated enumeration
constant prefix from TEST_UNION_ENUMA to TEST_UNION_ENUM_A.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240904111836.3273842-3-armbru@redhat.com>
camel_to_upper() converts its argument from camel case to upper case
with '_' between words. Used for generated enumeration constant
prefixes.
When some of the words are spelled all caps, where exactly to insert
'_' is guesswork. camel_to_upper()'s guesses are bad enough in places
to make people override them with a 'prefix' in the schema.
Rewrite it to guess better:
1. Insert '_' after a non-upper case character followed by an upper
case character:
OneTwo -> ONE_TWO
One2Three -> ONE2_THREE
2. Insert '_' before the last upper case character followed by a
non-upper case character:
ACRONYMWord -> ACRONYM_Word
Except at the beginning (as in OneTwo above), or when there is
already one:
AbCd -> AB_CD
This changes the default enumeration constant prefix for a number of
enums. Generated enumeration constants change only where the default
is not overridden with 'prefix'.
The following enumerations without a 'prefix' change:
enum old camel_to_upper()
new camel_to_upper()
------------------------------------------------------------------
DisplayGLMode DISPLAYGL_MODE
DISPLAY_GL_MODE
EbpfProgramID EBPF_PROGRAMID
EBPF_PROGRAM_ID
HmatLBDataType HMATLB_DATA_TYPE
HMAT_LB_DATA_TYPE
HmatLBMemoryHierarchy HMATLB_MEMORY_HIERARCHY
HMAT_LB_MEMORY_HIERARCHY
MultiFDCompression MULTIFD_COMPRESSION
MULTI_FD_COMPRESSION
OffAutoPCIBAR OFF_AUTOPCIBAR
OFF_AUTO_PCIBAR
QCryptoBlockFormat Q_CRYPTO_BLOCK_FORMAT
QCRYPTO_BLOCK_FORMAT
QCryptoBlockLUKSKeyslotState Q_CRYPTO_BLOCKLUKS_KEYSLOT_STATE
QCRYPTO_BLOCK_LUKS_KEYSLOT_STATE
QKeyCode Q_KEY_CODE
QKEY_CODE
XDbgBlockGraphNodeType X_DBG_BLOCK_GRAPH_NODE_TYPE
XDBG_BLOCK_GRAPH_NODE_TYPE
TestUnionEnumA TEST_UNION_ENUMA
TEST_UNION_ENUM_A
Add a 'prefix' so generated code doesn't change now. Subsequent
commits will remove most of them again. Two will remain:
MULTIFD_COMPRESSION, because migration code generally spells "multifd"
that way, and Q_KEY_CODE, because that one is baked into
subprojects/keycodemapdb/tools/keymap-gen.
The following enumerations with a 'prefix' change so that the prefix
is now superfluous:
enum old camel_to_upper()
new camel_to_upper() [equal to prefix]
------------------------------------------------------------------
BlkdebugIOType BLKDEBUGIO_TYPE
BLKDEBUG_IO_TYPE
QCryptoTLSCredsEndpoint Q_CRYPTOTLS_CREDS_ENDPOINT
QCRYPTO_TLS_CREDS_ENDPOINT
QCryptoSecretFormat Q_CRYPTO_SECRET_FORMAT
QCRYPTO_SECRET_FORMAT
QCryptoCipherMode Q_CRYPTO_CIPHER_MODE
QCRYPTO_CIPHER_MODE
QCryptodevBackendType Q_CRYPTODEV_BACKEND_TYPE
QCRYPTODEV_BACKEND_TYPE
QType [builtin] Q_TYPE
QTYPE
Drop these prefixes.
The following enumerations with a 'prefix' change without making the
'prefix' superfluous:
enum old camel_to_upper()
new camel_to_upper() [equal to prefix]
prefix
------------------------------------------------------------------
CpuS390Entitlement CPUS390_ENTITLEMENT
CPU_S390_ENTITLEMENT
S390_CPU_ENTITLEMENT
CpuS390Polarization CPUS390_POLARIZATION
CPU_S390_POLARIZATION
S390_CPU_POLARIZATION
CpuS390State CPUS390_STATE
CPU_S390_STATE
S390_CPU_STATE
QAuthZListFormat Q_AUTHZ_LIST_FORMAT
QAUTH_Z_LIST_FORMAT
QAUTHZ_LIST_FORMAT
QAuthZListPolicy Q_AUTHZ_LIST_POLICY
QAUTH_Z_LIST_POLICY
QAUTHZ_LIST_POLICY
QCryptoAkCipherAlgorithm Q_CRYPTO_AK_CIPHER_ALGORITHM
QCRYPTO_AK_CIPHER_ALGORITHM
QCRYPTO_AKCIPHER_ALG
QCryptoAkCipherKeyType Q_CRYPTO_AK_CIPHER_KEY_TYPE
QCRYPTO_AK_CIPHER_KEY_TYPE
QCRYPTO_AKCIPHER_KEY_TYPE
QCryptoCipherAlgorithm Q_CRYPTO_CIPHER_ALGORITHM
QCRYPTO_CIPHER_ALGORITHM
QCRYPTO_CIPHER_ALG
QCryptoHashAlgorithm Q_CRYPTO_HASH_ALGORITHM
QCRYPTO_HASH_ALGORITHM
QCRYPTO_HASH_ALG
QCryptoIVGenAlgorithm Q_CRYPTOIV_GEN_ALGORITHM
QCRYPTO_IV_GEN_ALGORITHM
QCRYPTO_IVGEN_ALG
QCryptoRSAPaddingAlgorithm Q_CRYPTORSA_PADDING_ALGORITHM
QCRYPTO_RSA_PADDING_ALGORITHM
QCRYPTO_RSA_PADDING_ALG
QCryptodevBackendAlgType Q_CRYPTODEV_BACKEND_ALG_TYPE
QCRYPTODEV_BACKEND_ALG_TYPE
QCRYPTODEV_BACKEND_ALG
QCryptodevBackendServiceType Q_CRYPTODEV_BACKEND_SERVICE_TYPE
QCRYPTODEV_BACKEND_SERVICE_TYPE
QCRYPTODEV_BACKEND_SERVICE
Subsequent commits will tweak things to remove most of these prefixes.
Only QAUTHZ_LIST_FORMAT and QAUTHZ_LIST_POLICY will remain.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240904111836.3273842-2-armbru@redhat.com>
- Mattias's patch to support concurrent bounce buffers for PCI devices
- David's memory leak fix in dirty_memory_extend()
- Fabiano's CI fix to disable vmstate-static-checker test in compat tests
- Denis's patch that adds one more trace point for cpu throttle changes
- Yichen's multifd qatzip compressor support
-----BEGIN PGP SIGNATURE-----
iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZt9VlhIccGV0ZXJ4QHJl
ZGhhdC5jb20ACgkQO1/MzfOr1wZ+4QD+NPzprFD7RF2DPHT5bdo6NTWFSZxW4dyD
oFp2vhYDEAYA/A5TTfOh3QpYBOaP2PxztZIZSLgs1bokhp+sLM3/PVsK
=6JYP
-----END PGP SIGNATURE-----
Merge tag 'migration-20240909-pull-request' of https://gitlab.com/peterx/qemu into staging
Migration pull request for 9.2
- Mattias's patch to support concurrent bounce buffers for PCI devices
- David's memory leak fix in dirty_memory_extend()
- Fabiano's CI fix to disable vmstate-static-checker test in compat tests
- Denis's patch that adds one more trace point for cpu throttle changes
- Yichen's multifd qatzip compressor support
# -----BEGIN PGP SIGNATURE-----
#
# iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZt9VlhIccGV0ZXJ4QHJl
# ZGhhdC5jb20ACgkQO1/MzfOr1wZ+4QD+NPzprFD7RF2DPHT5bdo6NTWFSZxW4dyD
# oFp2vhYDEAYA/A5TTfOh3QpYBOaP2PxztZIZSLgs1bokhp+sLM3/PVsK
# =6JYP
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 09 Sep 2024 21:07:50 BST
# gpg: using EDDSA key B9184DC20CC457DACF7DD1A93B5FCCCDF3ABD706
# gpg: issuer "peterx@redhat.com"
# gpg: Good signature from "Peter Xu <xzpeter@gmail.com>" [marginal]
# gpg: aka "Peter Xu <peterx@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: B918 4DC2 0CC4 57DA CF7D D1A9 3B5F CCCD F3AB D706
* tag 'migration-20240909-pull-request' of https://gitlab.com/peterx/qemu:
system: improve migration debug
tests/migration: Add integration test for 'qatzip' compression method
migration: Introduce 'qatzip' compression method
migration: Add migration parameters for QATzip
meson: Introduce 'qatzip' feature to the build system
docs/migration: add qatzip compression feature
ci: migration: Don't run python tests in the compat job
softmmu/physmem: fix memory leak in dirty_memory_extend()
softmmu: Support concurrent bounce buffers
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add CONFIG_DARWIN to the pbkdf test build condition, since we have a way
to measure CPU time on this platform since commit bf98afc75e.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The meson rules were excluding the pbkdf crypto test when gnutls was the
crypto backend. It was then excluded again in #if statements in the test
file.
Rather than update these conditions, remove them all, and use the result
of the qcrypto_pbkdf_supports() function to determine whether to skip
test registration.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Error reporting from gnutls was improved by:
commit 57941c9c86
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Fri Mar 15 14:07:58 2024 +0000
crypto: push error reporting into TLS session I/O APIs
This has the effect of changing the output from one of the NBD
tests.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
On my OpenBSD VM test system, the ahci-test sometimes hits its 60 second
timeout. It has 75 subtests and allowing at least two seconds per
subtest seems reasonable. Bump it to 150s.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20240905165554.320577-3-peter.maydell@linaro.org
In the dm163-test and stm32l4x5_usart-test, a couple of subtests are
missing the qtest_quit() call. The effect of this is that on hosts
other than Linux and FreeBSD the test will timeout after executing
all the tests:
242/845 qemu:qtest+qtest-arm / qtest-arm/dm163-test TIMEOUT 60.04s 3 subtests passed
100/845 qemu:qtest+qtest-arm / qtest-arm/stm32l4x5_usart-test TIMEOUT 600.02s 5 subtests passed
This happens because the qemu-system-arm binary which the test
starts does not exit, and because it shares the stdout with the
test binary, the overall meson test harness thinks the test is
still running. On Linux and FreeBSD we have an extra safety net
set up in qtest_spawn_qemu() which kills off any QEMU binary that
ends up without a parent. This is intended for the case where
QEMU crashed and didn't respond to a SIGTERM or polite request
to quit, but it also sidestepped the problem in this case.
However, OpenBSD doesn't have a PDEATHSIG equivalent, so we
see the timeouts when running a 'make vm-build-openbsd' run.
Add the missing qtest_quit() calls.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20240905165554.320577-2-peter.maydell@linaro.org
- Steve's cleanup of unused variable
- Peter Maydell's fixes for several leaks in migration-test
- Fabiano's flexibilization of multifd data structures for device
state migration
- Arman Nabiev's fix for ppc e500 migration
- Thomas' fix for migration-test vs. --without-default-devices
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEqhtIsKIjJqWkw2TPx5jcdBvsMZ0FAmbYVXwQHGZhcm9zYXNA
c3VzZS5kZQAKCRDHmNx0G+wxnRucEAC1vo046UGdUmbb4PaF5vKAg97io6RB2nrH
HMz56Yc0AcAKRUGwe2Z80e2jY8B6zi8Ha8b9l7cVsej095eGCF+tINIL4wRX4lHm
alDY/LkhuqjE5g5c/DaeTztyBOFLvdWHPU5eJyDOC9r7kSlnUcL1gAslH23b8uL0
xvhPVKaTWjGIzNL1q/XfBr1WgRGqfD6dYb32HJDTq85yOnUT5sEr55aoEEu0euKh
MYbXPmi5AMbrp8nP21kzUopX8iYERRdoKwhF0ZssciGi/qJVevH70tNdbDEQSxyp
+vtP54TnL3LrzD4uY5Snng9zT9h0QrZujY79OEcxu20U0s29OQaudWkIjp7yLLUv
UnPZHS+bIyaS53DdpV94GKGGBX1wrjGC/sn8eGYzmb2yMlMjLTBoE8L5r9cadshX
XTeF4MtKGqaS3xDM2fIgACHHFl6qr/l0nENspv0raFzpf9Jx/WbpekghvTuWN6/B
pZHnoOTNiAqXS/Rnyy829vsQ0Pw4hi6wx79Z73RP+35ubZTgTmOsQx9f2FjuEh6k
JS+q9k4VJ+nntUWsYn4GS1Jlt+FXJ2hfzNj1NNFN4xLT1oioc6pCHsQyV7SBArB1
ml2zYyfKCTC3riIRhcv/ew6OcKbhHcPFOpd/v0y40LO3mx8S0LZnUWXkcrl3XIZS
Mj5CBdlFgA==
=SRN4
-----END PGP SIGNATURE-----
Merge tag 'migration-20240904-pull-request' of https://gitlab.com/farosas/qemu into staging
Migration pull request
- Steve's cleanup of unused variable
- Peter Maydell's fixes for several leaks in migration-test
- Fabiano's flexibilization of multifd data structures for device
state migration
- Arman Nabiev's fix for ppc e500 migration
- Thomas' fix for migration-test vs. --without-default-devices
# -----BEGIN PGP SIGNATURE-----
#
# iQJEBAABCAAuFiEEqhtIsKIjJqWkw2TPx5jcdBvsMZ0FAmbYVXwQHGZhcm9zYXNA
# c3VzZS5kZQAKCRDHmNx0G+wxnRucEAC1vo046UGdUmbb4PaF5vKAg97io6RB2nrH
# HMz56Yc0AcAKRUGwe2Z80e2jY8B6zi8Ha8b9l7cVsej095eGCF+tINIL4wRX4lHm
# alDY/LkhuqjE5g5c/DaeTztyBOFLvdWHPU5eJyDOC9r7kSlnUcL1gAslH23b8uL0
# xvhPVKaTWjGIzNL1q/XfBr1WgRGqfD6dYb32HJDTq85yOnUT5sEr55aoEEu0euKh
# MYbXPmi5AMbrp8nP21kzUopX8iYERRdoKwhF0ZssciGi/qJVevH70tNdbDEQSxyp
# +vtP54TnL3LrzD4uY5Snng9zT9h0QrZujY79OEcxu20U0s29OQaudWkIjp7yLLUv
# UnPZHS+bIyaS53DdpV94GKGGBX1wrjGC/sn8eGYzmb2yMlMjLTBoE8L5r9cadshX
# XTeF4MtKGqaS3xDM2fIgACHHFl6qr/l0nENspv0raFzpf9Jx/WbpekghvTuWN6/B
# pZHnoOTNiAqXS/Rnyy829vsQ0Pw4hi6wx79Z73RP+35ubZTgTmOsQx9f2FjuEh6k
# JS+q9k4VJ+nntUWsYn4GS1Jlt+FXJ2hfzNj1NNFN4xLT1oioc6pCHsQyV7SBArB1
# ml2zYyfKCTC3riIRhcv/ew6OcKbhHcPFOpd/v0y40LO3mx8S0LZnUWXkcrl3XIZS
# Mj5CBdlFgA==
# =SRN4
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 04 Sep 2024 13:41:32 BST
# gpg: using RSA key AA1B48B0A22326A5A4C364CFC798DC741BEC319D
# gpg: issuer "farosas@suse.de"
# gpg: Good signature from "Fabiano Rosas <farosas@suse.de>" [unknown]
# gpg: aka "Fabiano Almeida Rosas <fabiano.rosas@suse.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: AA1B 48B0 A223 26A5 A4C3 64CF C798 DC74 1BEC 319D
* tag 'migration-20240904-pull-request' of https://gitlab.com/farosas/qemu: (34 commits)
tests/qtest/migration: Add a check for the availability of the "pc" machine
target/ppc: Fix migration of CPUs with TLB_EMB TLB type
migration/multifd: Add documentation for multifd methods
migration/multifd: Add a couple of asserts for p->iov
migration/multifd: Fix p->iov leak in multifd-uadk.c
migration/multifd: Stop changing the packet on recv side
migration/multifd: Make MultiFDMethods const
migration/multifd: Move nocomp code into multifd-nocomp.c
migration/multifd: Register nocomp ops dynamically
migration/multifd: Standardize on multifd ops names
migration/multifd: Allow multifd sync without flush
migration/multifd: Replace multifd_send_state->pages with client data
migration/multifd: Don't send ram data during SYNC
migration/multifd: Isolate ram pages packet data
migration/multifd: Remove total pages tracing
migration/multifd: Move pages accounting into multifd_send_zero_page_detect()
migration/multifd: Replace p->pages with an union pointer
migration/multifd: Make MultiFDPages_t:offset a flexible array member
migration/multifd: Introduce MultiFDSendData
migration/multifd: Pass in MultiFDPages_t to file_write_ramblock_iov
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
New test function "ufstest_query_desc_request" added, which can check one's
virtual UFS device can properly read and its descriptor data.
(Writing descriptors are not implemented yet.)
The testcases attempt to read all kinds of descriptors at least once,
except for configuration descriptors (which are not implemented yet.)
There are some testcases that are intended to make an error caused by
an invalid index value or an invalid selector value.
Signed-off-by: Yoochan Jeong <yc01.jeong@samsung.com>
Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com>
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
New test function "ufstest_query_attr_request" added, which can check one's
virtual UFS device can properly read and write its attribute data.
It tests if reading and writing attributes work properly. There are
some testcases that are intended to make an error caused by writing an
invalid value, allocating an invalid selector and permission issues.
Signed-off-by: Yoochan Jeong <yc01.jeong@samsung.com>
Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com>
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
New test function "ufstest_flag_request" added, which can check one's
virtual UFS device can properly read and write its flag data. It tests
if reading, setting, clearing and toggling flags work properly. There
are some testcases that are intended to make an error caused by
permission issues.
Signed-off-by: Yoochan Jeong <yc01.jeong@samsung.com>
Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com>
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
Minor bugs and errors related to ufs-test are resolved. Some
permissions and code implementations that are not synchronized
with the ufs spec are edited.
Signed-off-by: Yoochan Jeong <yc01.jeong@samsung.com>
Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com>
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
The single test that was using the QemuUserTest class
has been converted to the functional test framework.
This class is now unused, remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240822104238.75045-4-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240830133841.142644-40-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Straight forward conversion. Update the SHA1 hashes to
SHA256 hashes since SHA1 should not be used anymore nowadays.
Expose cpio_extract() in qemu_test.utils for possible reuse.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240822104238.75045-3-philmd@linaro.org>
[thuth: Add test to meson.build]
Message-ID: <20240830133841.142644-39-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Per commit 5334df4822 ("tests/avocado: Introduce
QemuUserTest base class"):
Similarly to the 'System' Test base class with methods
for testing system emulation, the QemuUserTest class
contains methods useful to test user-mode emulation.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240822104238.75045-2-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240830133841.142644-38-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Straight forward conversion. Update the SHA1 hashes to
SHA256 hashes since SHA1 should not be used anymore nowadays.
Since the asset is expected locally and the test is guarded
with RESCUE_YL_PATH, keep it under the 'quick' category.
$ RESCUE_YL_PATH=/path/to/rescue-yl QEMU_TEST_ALLOW_UNTRUSTED_CODE=1 \
make check-functional-mips64el
1/4 qemu:func-quick+func-mips64el / func-mips64el-empty_cpu_model OK 0.12s 1 subtests passed
2/4 qemu:func-quick+func-mips64el / func-mips64el-version OK 0.13s 1 subtests passed
3/4 qemu:func-quick+func-mips64el / func-mips64el-info_usernet OK 0.15s 1 subtests passed
4/4 qemu:func-quick+func-mips64el / func-mips64el-mips64el_fuloong2e OK 0.19s 1 subtests passed
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240827094905.80648-2-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240830133841.142644-37-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Straight forward conversion. Update the SHA1 hash to
SHA256 since SHA1 should not be used anymore nowadays.
Provide get_qemu_img() helper in qemu_test.
$ make check-functional-aarch64 V=1
▶ 1/4 test_aarch64_virt.Aarch64VirtMachine.test_aarch64_virt_gicv2 OK
▶ 1/4 test_aarch64_virt.Aarch64VirtMachine.test_aarch64_virt_gicv3 OK
▶ 1/4 test_aarch64_virt.Aarch64VirtMachine.test_alpine_virt_tcg_gic_max OK
1/4 qemu:func-thorough+func-aarch64-thorough+thorough / func-aarch64-aarch64_virt OK 30.44s 3 subtests passed
...
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240826103634.52384-1-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240830133841.142644-36-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Straight forward conversion. Since SBSA_FLASH files are not
tarballs, use lzma_uncompress() method.
Avocado used to set a timeout of 11 tests * 180s = 1980s.
Hopefully 600s should be sufficient.
Running on macOS Sonoma / Apple silicon M1:
$ QEMU_TEST_TIMEOUT_EXPECTED=1 make check-functional-aarch64 V=1
▶ 1/5 test_aarch64_sbsaref.Aarch64SbsarefMachine.test_sbsaref_alpine_linux_max OK
▶ 1/5 test_aarch64_sbsaref.Aarch64SbsarefMachine.test_sbsaref_alpine_linux_max_pauth_impdef OK
▶ 1/5 test_aarch64_sbsaref.Aarch64SbsarefMachine.test_sbsaref_alpine_linux_max_pauth_off OK
▶ 1/5 test_aarch64_sbsaref.Aarch64SbsarefMachine.test_sbsaref_alpine_linux_neoverse_n1 OK
▶ 1/5 test_aarch64_sbsaref.Aarch64SbsarefMachine.test_sbsaref_edk2_firmware OK
▶ 1/5 test_aarch64_sbsaref.Aarch64SbsarefMachine.test_sbsaref_openbsd73_cortex_a57 OK
▶ 1/5 test_aarch64_sbsaref.Aarch64SbsarefMachine.test_sbsaref_openbsd73_max OK
▶ 1/5 test_aarch64_sbsaref.Aarch64SbsarefMachine.test_sbsaref_openbsd73_max_pauth_impdef OK
▶ 1/5 test_aarch64_sbsaref.Aarch64SbsarefMachine.test_sbsaref_openbsd73_max_pauth_off OK
▶ 1/5 test_aarch64_sbsaref.Aarch64SbsarefMachine.test_sbsaref_openbsd73_neoverse_n1 OK
1/5 qemu:func-thorough+func-aarch64-thorough+thorough / func-aarch64-aarch64_sbsaref OK 241.79s 11 subtests passed
...
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240823131614.10269-1-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Message-ID: <20240830133841.142644-35-thuth@redhat.com>
[thuth: remove remaining Avocado tags]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Straight forward conversion. Update the SHA1 hashes to SHA256
hashes since SHA1 should not be used anymore nowadays.
$ QEMU_TEST_ALLOW_UNTRUSTED_CODE=1 make check-functional-arm
...
6/6 qemu:func-thorough+func-arm-thorough+thorough / func-arm-arm_integratorcp OK 3.90s 2 subtests passed
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240822110238.82312-1-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240830133841.142644-34-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
While we're at it, update the SHA1 hashes to SHA256 hashes since
SHA1 should not be used anymore nowadays.
Message-ID: <20240830133841.142644-32-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Provide a "gzip_uncompress" function based on the standard "gzip" module
to avoid the usage of avocado.utils here.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240830133841.142644-31-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Mostly a straight-forward conversion. Looks like we can simply drop
the avocado datadrainer stuff when not using the avocado framework
anymore.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240830133841.142644-30-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The code that handles running of tesseract needs to be tweaked a little
bit to be able to run without the functions from avocado.utils, and
while we're at it, drop some legacy stuff that was still there due to
Tesseract 3 support that we already dropped a while ago.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240830133841.142644-29-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
A straight forward conversion, we just also have to remove the decorator
@skipUnless(os.getenv('SPEED')) since all non-trivial functional tests
are running in SPEED=thorough mode now. Also make sure that the extracted
assets are writable, so that the test does not fail if it gets re-run
and there are stale read-only files already around.
Message-ID: <20240830133841.142644-28-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Use the Python standard zipfile module instead of avocado.utils for
extracting the ZIP file that we download here, and use the standard
subprocess module for running the "tail" command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240830133841.142644-27-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Nothing thrilling in here, just straight forward conversions.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240830133841.142644-26-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Nothing thrilling in here, it's just a straight forward conversion.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240830133841.142644-25-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The machine_microblaze.py file contained two tests, one for each
endianness. Since we only support one QEMU target binary per file
in the new functional test environment, we have to split this file
up into two files now.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240830133841.142644-23-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Nothing thrilling in here, it's just a straight forward conversion.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240830133841.142644-22-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
These tests use archive.lzma_uncompress() from the Avocado utils,
so provide a small helper function for this, based on the
standard lzma module from Python instead.
And while we're at it, replace the MD5 hashes in the topology test
with proper SHA256 hashes, since MD5 should not be used anymore
nowadays.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240830133841.142644-21-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Instead of using the "archive" module from avocado.utils, switch
these tests to use the new wrapper function that is based on the
"tarfile" module instead.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240830133841.142644-20-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Some Avocado-based tests use the "archive" module from avocado.utils
to extract files from an archive. To be able to use these tests
without Avocado, we have to provide our own function for extracting
files. Fortunately, there is already the tarfile module that will
provide us with this functionality, so let's just add a nice wrapper
function around that.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240830133841.142644-19-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Now that we've got the Asset class with pre-caching, we can convert
some Avocado tests that use fetch_asset() for downloading their
required files.
Message-ID: <20240830133841.142644-18-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When running "make -j$(nproc) check-functional", tests that use the
same asset might be running in parallel. Improve the downloading to
detect this situation and wait for the other thread to finish the
download.
Message-ID: <20240830133841.142644-17-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Many tests need to access assets stored on remote sites. We don't want
to download these during test execution when run by meson, since this
risks hitting test timeouts when data transfers are slow.
Add support for pre-emptive caching of assets by setting the env var
QEMU_TEST_PRECACHE to point to a timestamp file. When this is set,
instead of running the test, the assets will be downloaded and saved
to the cache, then the timestamp file created.
A meson custom target is created as a dependency of each test suite
to trigger the pre-emptive caching logic before the test runs.
When run in caching mode, it will locate assets by looking for class
level variables with a name prefix "ASSET_", and type "Asset".
At the ninja level
ninja test --suite functional
will speculatively download any assets that are not already cached,
so it is advisable to set a timeout multiplier.
QEMU_TEST_NO_DOWNLOAD=1 ninja test --suite functional
will fail the test if a required asset is not already cached
ninja precache-functional
will download and cache all assets required by the functional
tests
At the make level, precaching is always done by
make check-functional
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
[thuth: Remove the duplicated "path = os.path.basename(...)" line]
Message-ID: <20240830133841.142644-16-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The 'Asset' class is a simple module that declares a downloadable
asset that can be cached locally. Downloads are stored in the user's
home dir at ~/.cache/qemu/download, using a sha256 sum of the URL.
[thuth: Drop sha1 support, use hash on file content for naming instead of URL,
add the possibility to specify the cache dir via environment variable]
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240830133841.142644-15-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
These simple tests can be converted to stand-alone tests quite easily,
e.g. by just setting the machine to 'none' now manually or by adding
"-cpu" command line parameters, since we don't support the corresponding
avocado tags in the new python test framework.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240830133841.142644-14-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
These test are rather simple and don't need any modifications apart
from adjusting the "from avocado_qemu" line. To ease debugging, make
the files executable and add a shebang line and Python '__main__'
handling, too, so that these tests can now be run by executing them
directly.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240830133841.142644-13-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Provide a meson.build file for the upcoming python-based functional
tests, and add some wrapper glue targets to the tests/Makefile.include
file. We are going to use two "speed" modes for the functional tests:
The "quick" tests can be run at any time (i.e. also during "make check"),
while the "thorough" tests should only be run when running a
"make check-functional" test run (since these tests might download
additional assets from the internet).
The changes to the meson.build files are partly based on an earlier
patch by Ani Sinha.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240830133841.142644-12-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
