With load_elf() api, image load low address and high address is converted
to physical address if parameter translate_fn is provided. However
executing entry address is still virtual address. Here convert entry
address into physical address, since MMU is disabled when system power on,
the first PC instruction should be physical address.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Song Gao <gaosong@loongson.cn>
On Emscripten, function pointer casts can result in runtime failures due to
strict function signature checks. This affects the use of g_list_sort and
g_slist_sort, which internally perform function pointer casts that are not
supported by Emscripten. To avoid these issues, g_list_sort_with_data and
g_slist_sort_with_data should be used instead, as they do not rely on
function pointer casting.
Signed-off-by: Kohei Tokunaga <ktokunaga.mail@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <0fcddfca16ca8da2bdaa7b2c114476f5b73d032b.1745295397.git.ktokunaga.mail@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
We perform a plugin reset, uninstall, and make sure we went through
those steps.
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20250404032027.430575-3-pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We don't expect to hit exceptions in our testing so currently all the
vectors report an un-expected exception and then attempt to exit.
However for aarch64 we should always use the extended information
block as we do in _exit. Rather than duplicate the code on the error
handler just branch to the _exit handler with a failing status code.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250404115641.258048-1-alex.bennee@linaro.org>
Requiring TARGET_PAGE_MASK to be defined gets in the way of building
this unit once. qemu_target_page_mask() will tell us what it is.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250304222439.2035603-21-alex.bennee@linaro.org>
GCC versions at least 12 through 15 incorrectly report a warning
about code in sha1.c:
tests/tcg/multiarch/sha1.c:161:13: warning: ‘SHA1Transform’ reading 64 bytes from a region of size 0 [-Wstringop-overread]
161 | SHA1Transform(context->state, &data[i]);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This is a piece of stock library code for doing SHA1 which we've
simply copied, rather than writing ourselves. The bug has been
reported to upstream GCC (about a different library's use of this
code):
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=106709
For our test case, since this isn't our original code and there isn't
actually a bug in it, suppress the incorrect warning rather than
trying to modify the code to work around the compiler issue.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2328
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250227141343.1675415-1-peter.maydell@linaro.org>
[AJB: -Wno-unknown-warning-option for clang's sake]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250304222439.2035603-18-alex.bennee@linaro.org>
We allow things like:
tests/tcg/i386/test-i386-bmi2.c:124:35: warning: shifting a negative signed value is undefined [-Wshift-negative-value]
assert(result == (mask & ~(-1 << 30)));
in the main code, so allow it for the test.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250304222439.2035603-17-alex.bennee@linaro.org>
In preparation for enabling clang and avoiding:
error: '_Static_assert' with no message is a C2x extension [-Werror,-Wc2x-extensions]
let us just add the message to silence the warning.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250304222439.2035603-15-alex.bennee@linaro.org>
The main multiarch tests should compile for any POSIX system, however
test-vma's usage of MAP_NORESERVE makes it a linux-only test. Simply
moving the source file is enough for the build logic to skip on BSD's.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250304222439.2035603-14-alex.bennee@linaro.org>
./tests/functional/test_aarch64_tcg_plugins.py needs to have plugin
libinsn built. However, it's not listed as a dependency, so meson can't
know it needs to be built.
Thus, we keep track of all plugins, and add them as an explicit
dependency.
Fixes: 4c134d07b9 ("tests: add a new set of tests to exercise plugins")
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250304222439.2035603-9-alex.bennee@linaro.org>
- add a check-rust test to docker builds
- re-factor the qtest logic to be cleaner
- fix tests to not clock_step when no timers enabled
- roll-up log prefix into qtest_send
- cleaner error reporting when qtest_clock_set fails
- revert old deadlock fix now tests are updated
- only run full set of migration tests under HW acceleration
- support late attachment to user-mode gdbstubs
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmeqBSsACgkQ+9DbCVqe
KkQS/Af+K0hpdGc1msiuMsqmuESBvhoQniYZFLN1/pwe2KpG8i/+fq2fsCuxJhJ1
2TzPH7aj54p9MGCZf2k9JLhO22XldN+oezZMc1crhoWK0AtrWhnLs58I2oEPIsUo
NmGO6Zfm98ge89o2y8GCvd0QXAtUf+jduDKnW0mfnOnw+w/mky5KzWS7/1091VGW
42LSY4KnqgdLSqLyuLBOrgADEjB1ChWS4/bSC+kEYSGrmNQB+n1KeIzzlJBGpOr0
Z9yzmhMCm7TWdkFNPmnVfYH/7ZUNcpv6PtQSpkku4f6b/gybyvJBknHpM4i+Gpb5
87wSjljrCpdNm/9KFRjiJuUWdS/jCg==
=UF0n
-----END PGP SIGNATURE-----
Merge tag 'pull-10.0-testing-and-gdstub-updates-100225-1' of https://gitlab.com/stsquad/qemu into staging
testing and gdbstub updates:
- add a check-rust test to docker builds
- re-factor the qtest logic to be cleaner
- fix tests to not clock_step when no timers enabled
- roll-up log prefix into qtest_send
- cleaner error reporting when qtest_clock_set fails
- revert old deadlock fix now tests are updated
- only run full set of migration tests under HW acceleration
- support late attachment to user-mode gdbstubs
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmeqBSsACgkQ+9DbCVqe
# KkQS/Af+K0hpdGc1msiuMsqmuESBvhoQniYZFLN1/pwe2KpG8i/+fq2fsCuxJhJ1
# 2TzPH7aj54p9MGCZf2k9JLhO22XldN+oezZMc1crhoWK0AtrWhnLs58I2oEPIsUo
# NmGO6Zfm98ge89o2y8GCvd0QXAtUf+jduDKnW0mfnOnw+w/mky5KzWS7/1091VGW
# 42LSY4KnqgdLSqLyuLBOrgADEjB1ChWS4/bSC+kEYSGrmNQB+n1KeIzzlJBGpOr0
# Z9yzmhMCm7TWdkFNPmnVfYH/7ZUNcpv6PtQSpkku4f6b/gybyvJBknHpM4i+Gpb5
# 87wSjljrCpdNm/9KFRjiJuUWdS/jCg==
# =UF0n
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 10 Feb 2025 08:54:51 EST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-10.0-testing-and-gdstub-updates-100225-1' of https://gitlab.com/stsquad/qemu:
tests/tcg: Add late gdbstub attach test
docs/user: Document the %d placeholder and suspend=n QEMU_GDB features
gdbstub: Allow late attachment
osdep: Introduce qemu_kill_thread()
user: Introduce host_interrupt_signal
user: Introduce user/signal.h
gdbstub: Try unlinking the unix socket before binding
gdbstub: Allow the %d placeholder in the socket path
tests/qtest/migration: Pick smoke tests
tests/qtest/migration: Add --full option
Revert "util/timer: avoid deadlock when shutting down"
tests/qtest: tighten up the checks on clock_step
tests/qtest: rename qtest_send_prefix and roll-up into qtest_send
tests/qtest: simplify qtest_process_inbuf
tests/qtest: don't step clock at start of npcm7xx periodic IRQ test
tests/qtest: don't attempt to clock_step while waiting for virtio ISR
tests/docker: replicate the check-rust-tools-nightly CI job
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a small test to prevent regressions.
Make sure that host_interrupt_signal is not visible to the guest.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20250117001542.8290-9-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250207153112.3939799-18-alex.bennee@linaro.org>
The test-arm-iwmmmxt test isn't testing what it thinks it's testing.
If you run it with a CPU type that supports iwMMXt then it will crash
immediately with a SIGILL, because (even with -marm) GCC will link it
against startup code that is in Thumb mode, and no iwMMXt CPU has
Thumb:
00010338 <_start>:
10338: f04f 0b00 mov.w fp, #0
1033c: f04f 0e00 mov.w lr, #0
If you run it with a CPU type which does *not* support iwMMXt, which
is what 'make check-tcg' does, then QEMU will not try to handle the
insns as iwMMXt. Instead the translator turns them into illegal
instructions. Then in the linux-user cpu_loop() code we identify
them as FPA11 instructions inside emulate_arm_fpa11(), because the
FPA11 happened to use the same coprocessor number as these iwMMXt
insns. So we execute a completely different set of FPA11 insns,
which means we don't crash, but we will print garbage to stdout.
Then the test binary always exits with a 0 return code, so 'make
check-tcg' thinks the test passes.
Modern gnueabihf toolchains assume in their startup code that the CPU
is not so old as to not support Thumb, so there's no way to get them
to generate a binary that actually does what the test wants. Since
we're deprecating iwMMXt emulation anyway, it's not worth trying to
salvage the test case to get it to really test the iwMMXt insns.
Delete the test entirely.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20250127112715.2936555-3-peter.maydell@linaro.org
Add a test case which tests some corner case behaviour of
fused-multiply-add on x86:
* 0 * Inf + SNaN should raise Invalid
* 0 * Inf + QNaN shouldh not raise Invalid
* tininess should be detected after rounding
There is also one currently-disabled test case:
* flush-to-zero should be done after rounding
This is disabled because QEMU's emulation currently does this
incorrectly (and so would fail the test). The test case is kept in
but disabled, as the justification for why the test running harness
has support for testing both with and without FTZ set.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Link: https://lore.kernel.org/r/20250116112536.4117889-3-peter.maydell@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a small test to prevent regressions.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250128001338.11474-2-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Windows uses a special mechanism to enable plugins to work (DLL delay
loading). Option for lld is different than ld.
MSYS2 clang based environment use lld by default, so restricting to this
config on Windows is safe, and will avoid false bug reports.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Tested-by: Stefan Weil <sw@weilnetz.de>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20250110203401.178532-4-pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250116160306.1709518-26-alex.bennee@linaro.org>
The pauth-3 test explicitly tests that a computation of the
pointer-authentication produces the expected result. This means that
it must be run with the QARMA5 algorithm.
Explicitly set the pauth algorithm when running this test, so that it
doesn't break when we change the default algorithm the 'max' CPU
uses.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Compiling the s390x tests on Fedora, which has the s390x cross-compiler
installed, fails with:
In file included from qemu/tests/tcg/s390x/console.c:8:
qemu/tests/tcg/s390x/../../../pc-bios/s390-ccw/sclp.c:11:10: fatal error: string.h: No such file or directory
11 | #include <string.h>
This is because Fedora does not have a cross-libc. Since console.c
already uses the SLOF libc implementation, add the respective headers
to the include path.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241216133819.78583-1-iii@linux.ibm.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
make check-tcg fails on Fedora with the following error message:
alpha-linux-gnu-gcc [...] qemu/tests/tcg/multiarch/system/memory.c -o memory [...]
qemu/tests/tcg/multiarch/system/memory.c:17:10: fatal error: inttypes.h: No such file or directory
17 | #include <inttypes.h>
| ^~~~~~~~~~~~
compilation terminated.
The reason is that Fedora has cross-compilers, but no cross-glibc
headers. Fix by hardcoding the format specifiers and dropping the
include.
An alternative fix would be to introduce a configure check for
inttypes.h. But this would make it impossible to use Fedora
cross-compilers for softmmu tests, which used to work so far.
Fixes: ecbcc9ead2 ("tests/tcg: add a system test to check memory instrumentation")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010085906.226249-1-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add system test to make sure FEAT_XS is enabled for max cpu emulation
and that QEMU doesn't crash when encountering an NXS instruction
variant.
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20241211144440.2700268-7-peter.maydell@linaro.org
[PMM: In ISAR field test, mask with 0xf, not 0xff; use < rather
than an equality test to follow the standard ID register field
check guidelines]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
GDB 15 does not like exit() anymore:
(gdb) python exit(0)
Python Exception <class 'SystemExit'>: 0
Error occurred in Python: 0
Use the GDB's own exit command, like it's already done in a couple
places, everywhere. This is the same fix as commit 93a3048dcf
("tests: Gently exit from GDB when tests complete"), but applied to
more places.
Acked-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20241022113939.19989-1-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Add a test to prevent regressions.
Share some useful pieces with the vfminmax test.
Remove the duplicates from the floating point class values.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20241023000147.34035-3-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a small test to prevent regressions.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20241108145237.37377-2-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Test the lowest and the highest real-time signals. This requires
configuring the real-time signal mapping, and therefore some knowledge
about the host. To this end, pass the emulator path in the QEMU
environment variable to all tests (this should not disturb the existing
ones), and assume that all hosts have signals 36-39 available.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20241029232211.206766-3-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[1] deprecated -mpower8-vector, resulting in:
powerpc64-linux-gnu-gcc: warning: switch '-mpower8-vector' is no longer supported
qemu/tests/tcg/ppc64/vsx_f2i_nan.c:4:15: error: expected ';' before 'float'
4 | typedef vector float vsx_float32_vec_t;
| ^~~~~~
Use -mcpu=power8 instead. In order to properly verify that this works,
one needs a big-endian (the minimum supported CPU for 64-bit
little-endian is power8 anyway) GCC configured with --enable-checking
(see GCC commit e154242724b0 ("[RS6000] Don't pass -many to the
assembler").
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=109987
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20241023131250.48510-1-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
- update MAINTAINERS with pointers to foo/next
- add NOFETCH to help test custom docker builds
- update microblaze toolchain with atomic fixes
- update tsan build and documentation
- don't restrict build-environment by arch unless needed
- add cross-modifying code test
- add tracepoints for cpu_step_atomic fallbacks
- fix defaults for loongarch cross build
- make check-[dco|patch] a little more verbose
- fix gdbstub bug preventing aarch64_be-linux-user starting
- add basic test for aarch64_be
- clean up some gdbstub test scripts
- fix qemu_plugin_reset
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmcaDeQACgkQ+9DbCVqe
KkRTlQgAlFaP1Nxa8y6pRZSL0WY9J3Znf5e2GDnVN3nJbfx1wZg7oZ4/dWieDF/Y
/9jLfMi8nDJ51tzH24PSASbHQ1xnblhuUfhRMwqAFhSwsZUb0VzdeGdq+FIyXQ5w
Cy2Ubz7g81qP/x9JRCCUGFfXaM1LSizsY1lNioRsDd533WJLkvxWucmpSN3XhxHJ
rEa3xI/qAcUah4G3yww47L+DmlKnJQcsihShRBC6Am2tWqxbz+1kBUaVfaVVo1if
IPN+bBk4eI1EHdRRyWJSsq3nELzqW4FJ3+9V0ifsOFW2KGsnkhbl0qUxqDmW5aBb
P9flEdpTfSiCbqp+IKG9vxJKuf/BGw==
=5Wui
-----END PGP SIGNATURE-----
Merge tag 'pull-maintainer-oct-misc-241024-1' of https://gitlab.com/stsquad/qemu into staging
testing, gdbstub and plugin updates
- update MAINTAINERS with pointers to foo/next
- add NOFETCH to help test custom docker builds
- update microblaze toolchain with atomic fixes
- update tsan build and documentation
- don't restrict build-environment by arch unless needed
- add cross-modifying code test
- add tracepoints for cpu_step_atomic fallbacks
- fix defaults for loongarch cross build
- make check-[dco|patch] a little more verbose
- fix gdbstub bug preventing aarch64_be-linux-user starting
- add basic test for aarch64_be
- clean up some gdbstub test scripts
- fix qemu_plugin_reset
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmcaDeQACgkQ+9DbCVqe
# KkRTlQgAlFaP1Nxa8y6pRZSL0WY9J3Znf5e2GDnVN3nJbfx1wZg7oZ4/dWieDF/Y
# /9jLfMi8nDJ51tzH24PSASbHQ1xnblhuUfhRMwqAFhSwsZUb0VzdeGdq+FIyXQ5w
# Cy2Ubz7g81qP/x9JRCCUGFfXaM1LSizsY1lNioRsDd533WJLkvxWucmpSN3XhxHJ
# rEa3xI/qAcUah4G3yww47L+DmlKnJQcsihShRBC6Am2tWqxbz+1kBUaVfaVVo1if
# IPN+bBk4eI1EHdRRyWJSsq3nELzqW4FJ3+9V0ifsOFW2KGsnkhbl0qUxqDmW5aBb
# P9flEdpTfSiCbqp+IKG9vxJKuf/BGw==
# =5Wui
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 24 Oct 2024 10:05:40 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-maintainer-oct-misc-241024-1' of https://gitlab.com/stsquad/qemu:
plugins: fix qemu_plugin_reset
MAINTAINERS: mention my plugins/next tree
testing: Enhance gdb probe script
tests/tcg/aarch64: Use raw strings for regexes in test-mte.py
tests/tcg: enable basic testing for aarch64_be-linux-user
config/targets: update aarch64_be-linux-user gdb XML list
MAINTAINERS: mention my gdbstub/next tree
gitlab: make check-[dco|patch] a little more verbose
dockerfiles: fix default targets for debian-loongarch-cross
accel/tcg: add tracepoints for cpu_loop_exit_atomic
tests/tcg/x86_64: Add cross-modifying code test
scripts/ci: remove architecture checks for build-environment updates
docs/devel: update tsan build documentation
meson: hide tsan related warnings
MAINTAINERS: mention my testing/next tree
tests/docker: add NOFETCH env variable for testing
tests/docker: Fix microblaze atomics
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use Python's raw string notation instead of string literals for regex so
it's not necessary to double backslashes when regex special forms are
used. Raw notation is preferred for regex and easier to read.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20241015140806.385449-1-gustavo.romero@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20241023113406.1284676-15-alex.bennee@linaro.org>
We didn't notice breakage of aarch64_be because we don't have any TCG
tests for it. However while the existing aarch64 compiler can target
big-endian builds no one packages a BE libc. Instead we bang some
rocks together to do the most basic of hello world with a nostdlib
syscall test.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20241023113406.1284676-14-alex.bennee@linaro.org>
commit f025692c99 ("accel/tcg: Clear PAGE_WRITE before translation")
fixed cross-modifying code handling, but did not add a test. The
changed code was further improved recently [1], and I was not sure
whether these modifications were safe (spoiler: they were fine).
Add a test to make sure there are no regressions.
[1] https://lists.gnu.org/archive/html/qemu-devel/2022-09/msg00034.html
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20241001150617.9977-1-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20241023113406.1284676-8-alex.bennee@linaro.org>
We are already using the libc from SLOF for the s390-netboot.img, and
this libc implementation is way more complete and accurate than the
simple implementation that we currently use for the s390-ccw.img binary.
Since we are now always assuming that the SLOF submodule is available
when building the s390-ccw bios (see commit bf6903f694), we can drop
the simple implementation and use the SLOF libc for the s390-ccw.img
binary, too.
Additionally replace sclp_print calls with puts/printf now that it is
available.
Co-authored by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Message-ID: <20241020012953.1380075-3-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Now that orig_ax is exposed and GDB is happy, don't skip
test-proc-mappings.py on i386. In fact, it's broken only on
m68k now, so skip only this architecture.
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20240912093012.402366-6-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The cris target has recently been removed (see commit 44e4075bf4 -
"target/cris: Remove the deprecated CRIS target"), but apparently this
line has been forgotten. So clean it up now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
QEMU correctly implements the tracking of EXECUTE target modifications
by storing the instruction text in env->ex_value and tb->cs_base, the
latter of which is used for lookups.
Still, EXECUTE is a tricky corner of the s390x emulation, which can
benefit from having a regression test.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20241001145634.9786-1-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The 'GPL-2.0' license identifier has been deprecated since license
list version 3.0 [1] and replaced by the 'GPL-2.0-only' tag [2].
[1] https://spdx.org/licenses/GPL-2.0.html
[2] https://spdx.org/licenses/GPL-2.0-only.html
Mechanical patch running:
$ sed -i -e s/GPL-2.0/GPL-2.0-only/ \
$(git grep -l 'SPDX-License-Identifier: GPL-2.0[ $]' \
| egrep -v '^linux-headers|^include/standard-headers')
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
At first I thought I could compile the user-mode test for system mode
however we already have a fairly comprehensive test case for system
mode in "memory" so lets use that.
As tracking every access will quickly build up with "print-access" we
add a new mode to track groups of reads and writes to regions. Because
the test_data is 16k aligned we can be sure all accesses to it are
ones we can count.
First we extend the test to report where the test_data region is. Then
we expand the pdot() function to track the total number of reads and
writes to the region. We have to add some addition pdot() calls to
take into account multiple reads/writes in the test loops.
Finally we add a python script to integrate the data from the plugin
and the output of the test and validate they both agree on the total
counts. As some boot codes clear the bss we also add a flag to add a
regions worth of writes to the expected total.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240916085400.1046925-14-alex.bennee@linaro.org>
The multiarch system tests output serial data which should be
redirected to the "output" chardev rather than echoed to the console.
Comment the use of EXTFLAGS variable while we are at it.
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240916085400.1046925-13-alex.bennee@linaro.org>
While the compilers will generally happily synthesise a 64 bit value
for you on 32 bit systems it doesn't exercise anything on QEMU. It
also makes it hard to accurately compare the accesses to test_data
when instrumenting.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240916085400.1046925-12-alex.bennee@linaro.org>
This is useful information when debugging memory issues so lets
improve by:
- include the ptr address for u8 fills (like the others)
- indicate the number of operations for reads and writes
- explicitly note when we are flushing
- move the fill printf to after the reset
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240916085400.1046925-11-alex.bennee@linaro.org>
Add an explicit test to check expected memory values are read/written.
8,16,32 load/store are tested for all arch.
64,128 load/store are tested for aarch64/x64.
atomic operations (8,16,32,64) are tested for x64 only.
By default, atomic accesses are non atomic if a single cpu is running,
so we force creation of a second one by creating a new thread first.
load/store helpers code path can't be triggered easily in user mode (no
softmmu), so we can't test it here.
Output of test-plugin-mem-access.c is the list of expected patterns in
plugin output. By reading stdout, we can compare to plugins output and
have a multiarch test.
Can be run with:
make -C build/tests/tcg/$ARCH-linux-user run-plugin-test-plugin-mem-access-with-libmem.so
Tested-by: Xingtao Yao <yaoxt.fnst@fujitsu.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240910172033.1427812-7-pierrick.bouvier@linaro.org>
Message-Id: <20240916085400.1046925-10-alex.bennee@linaro.org>
By using "print-accesses=true" option, mem plugin will now print every
value accessed, with associated size, type (store vs load), symbol,
instruction address and phys/virt address accessed.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Xingtao Yao <yaoxt.fnst@fujitsu.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240724194708.1843704-6-pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240916085400.1046925-9-alex.bennee@linaro.org>
A specific plugin test can now read and check a plugin output, to ensure
it contains expected values.
Tested-by: Xingtao Yao <yaoxt.fnst@fujitsu.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240724194708.1843704-5-pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240916085400.1046925-8-alex.bennee@linaro.org>
Only multiarch tests are run with plugins, and we want to be able to run
per-arch test with plugins too.
Tested-by: Xingtao Yao <yaoxt.fnst@fujitsu.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240724194708.1843704-4-pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240916085400.1046925-7-alex.bennee@linaro.org>
