Almost all users of cpu->cfg.satp_mode care about the "max" value
satp_mode_max_from_map(cpu->cfg.satp_mode.map). Convert the QOM
properties back into it. For TCG, deduce the bitmap of supported modes
from valid_vm[].
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We can avoid the 'long' casts by using PRIx64 and HWADDR_PRIx on the fmt
strings for uint64_t and hwaddr types.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250429125811.224803-10-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Change create_fdt_pcie(), create_fdt_reset(), create_fdt_uart() and
create_fdt_rtc() to use s->memmap in their logic.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250429125811.224803-9-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
create_fdt_virtio() can use s->memmap instead of having an extra
argument for it.
While we're at it rewrite it a little bit to avoid the clunky line in
'name' and code repetition:
- declare 'virtio_base' out of the loop since it never changes;
- declare a 'size' variable. Use it to calculate the address of the
virtio device in an 'addr' variable;
- use 'addr' in the 'name' g_strdup_printf();
- use 'addr' and 'size' when creating the 'reg' property.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250429125811.224803-8-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
create_fdt_sockets() and all its fdt helpers (create_fdt_socket_aplic(),
create_fdt_imsic(), create_fdt_socket_plic(), create_fdt_socket_aclint()
and create_fdt_socket_memory()) can use s->memmap from their
RISCVVirtState pointer instead of having an extra memmap argument.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250429125811.224803-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
create_fdt(), create_fdt_flash() and create_fdt_fw_cfg() can access the
memmap via their RISCVVirtState pointers.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250429125811.224803-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The function can receive the value via s->memmap[VIRT_FW_CFG].base from
the caller, avoiding the use of virt_memmap.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250429125811.224803-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250429125811.224803-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We should use s->memmap instead of virt_memmap to be able to use an
updated memmap when we start versioning the board.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250429125811.224803-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Throughout the code we're accessing the board memmap, most of the time,
by accessing it statically via 'virt_memmap'. This static map is also
assigned in the machine state in s->memmap.
We're also passing it as a variable to some fdt functions, which is
unorthodox since we can spare a function argument by accessing it
statically or via the machine state.
All the current forms are valid but not all of the are scalable. In the
future we will version this board, and then all this code will need
rework because it should point to the updated memmap. In this case,
we'll want to assign the adequate versioned memmap once during init,
in s->memmap like it is being done today, and the rest of the code
will access the updated map via s->memmap.
We're also enforcing the pattern of using s->memmap instead of assigning
it to a temp variable 'memmap'. Code is copy/pasted around all the time
and being consistent is important.
We'll start these rather mechanical changes with virt_machine_init().
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-ID: <20250429125811.224803-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When the IOMMU is implemented as a PCI device, its BDF is created
locally in virt.c. However, the same BDF is also required in
virt-acpi-build.c to support ACPI. Therefore, make this information part
of the global RISCVVirtState structure so that it can be accessed
outside of virt.c as well.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20250322043139.2003479-2-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Mechanical change using gsed, then style manually adapted
to pass checkpatch.pl script.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250424194905.82506-4-philmd@linaro.org>
Coccinelle's indentation of virt_create_plic() results in a long line.
Avoid that by mimicking the old indentation manually.
Don't touch tests/tcg/mips/user/. I'm not sure these files are ours
to make style cleanups on. They might be imported third-party code,
which we should leave as is to not complicate future updates.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250407082643.2310002-2-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Allow the device being added to riscv virt VMs.
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-ID: <20250319141159.1461621-5-kraxel@redhat.com>
Add an "aliases" node with a "serial0" entry for the single UART
in the riscv virt machine.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2774
Signed-off-by: Vasilis Liaskovitis <vliaskovitis@suse.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250116161007.39710-1-vliaskovitis@suse.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
virt_machine_init() creates the HARTs vCPUs, then later
virt_machine_done() calls create_fdt_sockets(), so the
latter has access to the first vCPU via:
RISCVVirtState {
RISCVHartArrayState {
RISCVCPU *harts;
...
} soc[VIRT_SOCKETS_MAX];
...
} s;
Directly use that instead of the &first_cpu global.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250112231344.34632-3-philmd@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Keep kvm_riscv_get_timebase_frequency() prototype aligned with
the other ones declared in "kvm_riscv.h", have it take a RISCVCPU
cpu as argument. Include "target/riscv/cpu-qom.h" which declares
the RISCVCPU typedef.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250112231344.34632-2-philmd@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Some boards such as vmapple don't do real legacy PCI IRQ swizzling.
Instead, they just keep allocating more board IRQ lines for each new
legacy IRQ. Let's support that mode by giving instantiators a new
"nr_irqs" property they can use to support more than 4 legacy IRQ lines.
In this mode, GPEX will export more IRQ lines, one for each device.
Signed-off-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241223221645.29911-9-phil@philjordan.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Headers in include/sysemu/ are not only related to system
*emulation*, they are also used by virtualization. Rename
as system/ which is clearer.
Files renamed manually then mechanical change using sed tool.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Message-Id: <20241203172445.28576-1-philmd@linaro.org>
Add a new struct RISCVBootInfo to sync boot information between multiple
boot functions.
Signed-off-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20241120153935.24706-3-jim.shu@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Larger initrd image will overlap the DTB at 3GB address. Since 64-bit
system doesn't have 32-bit addressable issue, we just load DTB to the end
of dram in 64-bit system.
Signed-off-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20241120153935.24706-2-jim.shu@sifive.com>
[ Changes by AF
- Store fdt_load_addr_hi32 in the reset vector
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The last step to enable KVM AIA aplic-imsic with irqchip in split mode
is to deal with how MSIs are going to be sent. In our current design we
don't allow an APLIC controller to send MSIs unless it's on m-mode. And
we also do not allow Supervisor MSI address configuration via the
'smsiaddrcfg' and 'smsiaddrcfgh' registers unless it's also a m-mode
APLIC controller.
Add a new RISCVACPLICState attribute called 'kvm_msicfgaddr'. This
attribute represents the base configuration address for MSIs, in our
case the base addr of the IMSIC controller. This attribute is being set
only when running irqchip_split() mode with aia=aplic-imsic.
During riscv_aplic_msi_send() we'll check if the attribute was set to
skip the check for a m-mode APLIC controller and to change the resulting
MSI addr by adding kvm_msicfgaddr right before address_space_stl_le().
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241119191706.718860-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The current logic to determine if we don't need an emulated APLIC
controller, i.e. KVM will provide for us, is to determine if we're
running KVM, with in-kernel irqchip support, and running
aia=aplic-imsic. This is modelled by riscv_is_kvm_aia_aplic_imsic() and
virt_use_kvm_aia_aplic_imsic().
This won't suffice to support irqchip_split() mode: it will match
exactly the same conditions as the one above, but setting the irqchip to
'split' mode will now require us to emulate an APLIC s-mode controller,
like we're doing with 'aia=aplic'.
Create a new riscv_use_emulated_aplic() helper that will encapsulate
this logic. Replace the uses of "riscv_is_kvm_aia_aplic_imsic()" with
this helper every time we're taking a decision on emulate an APLIC
controller or not. Do the same in virt.c with virt_use_emulated_aplic().
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241119191706.718860-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Similar to the riscv_is_kvm_aia_aplic_imsic() helper from riscv_aplic.c,
the existing virt_use_kvm_aia() is testing for KVM aia=aplic-imsic with
in-kernel irqchip enabled. It is not checking for a generic AIA support.
Rename the helper to virt_use_kvm_aia_aplic_imsic() to reflect what the
helper is doing, and use the existing riscv_is_kvm_aia_aplic_imsic() to
obscure details such as the presence of the in-kernel irqchip.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241119191706.718860-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
In create_fdt_sockets() we have the following pattern:
if (kvm_enabled() && virt_use_kvm_aia(s)) {
(... do stuff ...)
} else {
(... do other stuff ...)
}
if (kvm_enabled() && virt_use_kvm_aia(s)) {
(... do more stuff ...)
} else {
(... do more other stuff)
}
Do everything in a single if/else clause to reduce the usage of
virt_use_kvm_aia() helper and to make the code a bit less repetitive.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241119191706.718860-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
MSIx support is added in the RISC-V IOMMU platform device by including
the required MSIx facilities to alow software to properly setup the MSIx
subsystem.
We took inspiration of what is being done in the riscv-iommu-pci device,
mainly msix_init() and msix_notify(), while keeping in mind that
riscv-iommu-sys isn't a true PCI device and we don't need to copy/paste
all the contents of these MSIx functions.
Two extra MSI MemoryRegions were added: 'msix-table' and 'msix-pba'.
They are used to manage r/w of the MSI table and Pending Bit Array (PBA)
respectively. Both are subregions of the main IOMMU memory region,
iommu->regs_mr, initialized during riscv_iommu_realize(), and each one
has their own handlers for MSIx reads and writes.
This is the expected memory map when using this device in the 'virt'
machine:
0000000003010000-0000000003010fff (prio 0, i/o): riscv-iommu-regs
0000000003010300-000000000301034f (prio 0, i/o): msix-table
0000000003010400-0000000003010407 (prio 0, i/o): msix-pba
We're now able to set IGS to RISCV_IOMMU_CAP_IGS_BOTH, and userspace is
free to decide which interrupt model to use.
Enabling MSIx support for this device in the 'virt' machine requires
adding 'msi-parent' in the iommu-sys DT.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241106133407.604587-6-dbarboza@ventanamicro.com>
[ Changes by AF:
- Used PRIx64 in trace
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add a new machine option called 'iommu-sys' that enables a
riscv-iommu-sys platform device for the 'virt' machine. The option is
default 'off'.
The device will use IRQs 36 to 39.
We will not support both riscv-iommu-sys and riscv-iommu-pci devices in
the same board in this first implementation. If a riscv-iommu-pci device
is added in the command line we will disable the riscv-iommu-sys device.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241106133407.604587-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
No need to QOM-cast twice, since the intermediate value
is not used.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20241125140535.4526-7-philmd@linaro.org>
Generate device tree entry for riscv-iommu PCI device, along with
mapping all PCI device identifiers to the single IOMMU device instance.
Signed-off-by: Tomasz Jeznach <tjeznach@rivosinc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241016204038.649340-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
* kvm: support for nested FRED
* tests/unit: fix warning when compiling test-nested-aio-poll with LTO
* kvm: refactoring of VM creation
* target/i386: expose IBPB-BRTYPE and SBPB CPUID bits to the guest
* hw/char: clean up serial
* remove virtfs-proxy-helper
* target/i386/kvm: Report which action failed in kvm_arch_put/get_registers
* qom: improvements to object_resolve_path*()
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmb++MsUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPVnwf/cdvfxvDm22tEdlh8vHlV17HtVdcC
Hw334M/3PDvbTmGzPBg26lzo4nFS6SLrZ8ETCeqvuJrtKzqVk9bI8ssZW5KA4ijM
nkxguRPHO8E6U33ZSucc+Hn56+bAx4I2X80dLKXJ87OsbMffIeJ6aHGSEI1+fKVh
pK7q53+Y3lQWuRBGhDIyKNuzqU4g+irpQwXOhux63bV3ADadmsqzExP6Gmtl8OKM
DylPu1oK7EPZumlSiJa7Gy1xBqL4Rc4wGPNYx2RVRjp+i7W2/Y1uehm3wSBw+SXC
a6b7SvLoYfWYS14/qCF4cBL3sJH/0f/4g8ZAhDDxi2i5kBr0/5oioDyE/A==
=/zo4
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* pc: Add a description for the i8042 property
* kvm: support for nested FRED
* tests/unit: fix warning when compiling test-nested-aio-poll with LTO
* kvm: refactoring of VM creation
* target/i386: expose IBPB-BRTYPE and SBPB CPUID bits to the guest
* hw/char: clean up serial
* remove virtfs-proxy-helper
* target/i386/kvm: Report which action failed in kvm_arch_put/get_registers
* qom: improvements to object_resolve_path*()
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmb++MsUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroPVnwf/cdvfxvDm22tEdlh8vHlV17HtVdcC
# Hw334M/3PDvbTmGzPBg26lzo4nFS6SLrZ8ETCeqvuJrtKzqVk9bI8ssZW5KA4ijM
# nkxguRPHO8E6U33ZSucc+Hn56+bAx4I2X80dLKXJ87OsbMffIeJ6aHGSEI1+fKVh
# pK7q53+Y3lQWuRBGhDIyKNuzqU4g+irpQwXOhux63bV3ADadmsqzExP6Gmtl8OKM
# DylPu1oK7EPZumlSiJa7Gy1xBqL4Rc4wGPNYx2RVRjp+i7W2/Y1uehm3wSBw+SXC
# a6b7SvLoYfWYS14/qCF4cBL3sJH/0f/4g8ZAhDDxi2i5kBr0/5oioDyE/A==
# =/zo4
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 03 Oct 2024 21:04:27 BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (23 commits)
qom: update object_resolve_path*() documentation
qom: set *ambiguous on all paths
qom: rename object_resolve_path_type() "ambiguousp"
target/i386/kvm: Report which action failed in kvm_arch_put/get_registers
kvm: Allow kvm_arch_get/put_registers to accept Error**
accel/kvm: refactor dirty ring setup
minikconf: print error entirely on stderr
9p: remove 'proxy' filesystem backend driver
hw/char: Extract serial-mm
hw/char/serial.h: Extract serial-isa.h
hw: Remove unused inclusion of hw/char/serial.h
target/i386: Expose IBPB-BRTYPE and SBPB CPUID bits to the guest
kvm: refactor core virtual machine creation into its own function
kvm/i386: replace identity_base variable with a constant
kvm/i386: refactor kvm_arch_init and split it into smaller functions
kvm: replace fprintf with error_report()/printf() in kvm_init()
kvm/i386: fix return values of is_host_cpu_intel()
kvm/i386: make kvm_filter_msr() and related definitions private to kvm module
hw/i386/pc: Add a description for the i8042 property
tests/unit: remove block layer code from test-nested-aio-poll
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# hw/arm/Kconfig
# hw/arm/pxa2xx.c
hw/char/serial currently contains the implementation of both TYPE_SERIAL and
TYPE_SERIAL_MM. According to serial_class_init(), TYPE_SERIAL is an internal
class while TYPE_SERIAL_MM is used by numerous machine types directly. Let's
move the latter into its own module which makes the dependencies more obvious
and the code more tidy.
The includes and the dependencies have been converted mechanically except in the
hw/char directories which were updated manually. The result was compile-tested.
Now, only hw/char makes direct use of TYPE_SERIAL:
# grep -r -e "select SERIAL" | grep -v SERIAL_
hw/char/Kconfig: select SERIAL
hw/char/Kconfig: select SERIAL
hw/char/Kconfig: select SERIAL
hw/char/Kconfig: select SERIAL
hw/char/Kconfig: select SERIAL
# grep -r -e "/serial\\.h"
include/hw/char/serial-mm.h:#include "hw/char/serial.h"
hw/char/serial-pci-multi.c:#include "hw/char/serial.h"
hw/char/serial.c:#include "hw/char/serial.h"
hw/char/serial-isa.c:#include "hw/char/serial.h"
hw/char/serial-pci.c:#include "hw/char/serial.h"
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Link: https://lore.kernel.org/r/20240905073832.16222-4-shentey@gmail.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When riscv_load_firmware() loads an ELF, the ELF segment addresses are
used, not the passed-in firmware_load_addr. The machine models assume
the firmware entry point is what they provided for firmware_load_addr,
and use that address to generate the boot ROM, so if the ELF is linked
at any other address, the boot ROM will jump to empty memory.
Pass back the ELF entry point to use when generating the boot ROM, so
the boot ROM can jump to firmware loaded anywhere in RAM. For example,
on the virt machine, this allows using an OpenSBI fw_dynamic.elf built
with FW_TEXT_START values other than 0x80000000.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240817002651.3209701-1-samuel.holland@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This reverts commit f42cdf2ea5.
Linux does not properly handle '#msi-cells=<0>' when searching for
MSI controllers for PCI devices which results in the devices being
unable to use MSIs. A patch for Linux has been sent[1] but until it,
or something like it, is merged and in distro kernels we should stop
adding the property. It's harmless to stop adding it since the
absence of the property and a value of zero for the property mean
the same thing according to the DT binding definition.
Link: https://lore.kernel.org/all/20240816124957.130017-2-ajones@ventanamicro.com/ # 1
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240816160743.220374-5-ajones@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit b1f1e9dcfa renamed 'riscv,delegate' to 'riscv,delegation' since
it is the correct name as per dt-bindings, and the absence of the
correct name will result in validation fails when dumping the dtb and
using dt-validate.
But this change has a side-effect: every other firmware available that
is AIA capable is using 'riscv,delegate', and it will fault/misbehave if
this property isn't present. The property was added back in QEMU 7.0,
meaning we have 2 years of firmware development using the wrong
property.
Re-introducing 'riscv,delegate' while keeping 'riscv,delegation' allows
older firmwares to keep booting with the 'virt' machine.
'riscv,delegate' is then marked for future deprecation with its use
being discouraged from now on.
Cc: Conor Dooley <conor@kernel.org>
Cc: Anup Patel <apatel@ventanamicro.com>
Fixes: b1f1e9dcfa ("hw/riscv/virt.c: aplic DT: rename prop to 'riscv, delegation'")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240715090455.145888-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
RISC-V virt is currently missing default type for block devices. Without
this being set, proper backend is not created when option like -cdrom
is used. So, make the virt board's default block device type be
IF_VIRTIO similar to other architectures.
We also need to set no_cdrom to avoid getting a default cdrom device.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240620064718.275427-1-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The DT docs for riscv,imsics [1] requires a 'msi-cell' property. Add one
and set it zero.
[1] Documentation/devicetree/bindings/interrupt-controller/riscv,imsics.yaml
Reported-by: Conor Dooley <conor@kernel.org>
Fixes: 28d8c28120 ("hw/riscv: virt: Add optional AIA IMSIC support to virt machine")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240531202759.911601-9-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The DT docs for riscv,imsics [1] predicts a 'qemu,imsics' enum in the
'compatible' property.
[1] Documentation/devicetree/bindings/interrupt-controller/riscv,imsics.yaml
Reported-by: Conor Dooley <conor@kernel.org>
Fixes: 28d8c28120 ("hw/riscv: virt: Add optional AIA IMSIC support to virt machine")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240531202759.911601-8-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The Linux DT docs for imsic [1] predicts an 'interrupt-controller@addr'
node, not 'imsic@addr', given this node inherits the
'interrupt-controller' node.
[1] Documentation/devicetree/bindings/interrupt-controller/riscv,imsics.yaml
Reported-by: Conor Dooley <conor@kernel.org>
Fixes: 28d8c28120 ("hw/riscv: virt: Add optional AIA IMSIC support to virt machine")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240531202759.911601-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The DT docs for riscv,aplic [1] predicts a 'riscv,delegation' property.
Not 'riscv,delegate'.
[1] Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml
Reported-by: Conor Dooley <conor@kernel.org>
Fixes: e6faee6585 ("hw/riscv: virt: Add optional AIA APLIC support to virt machine")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240531202759.911601-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The DT docs for riscv,aplic [1] predicts a 'qemu,aplic' enum in the
'compatible' property.
[1] Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml
Reported-by: Conor Dooley <conor@kernel.org>
Fixes: e6faee6585 ("hw/riscv: virt: Add optional AIA APLIC support to virt machine")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240531202759.911601-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The correct name of the aplic controller node, as per Linux kernel DT
docs [1], is 'interrupt-controller@addr'.
[1] Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml
Reported-by: Conor Dooley <conor@kernel.org>
Fixes: e6faee6585 ("hw/riscv: virt: Add optional AIA APLIC support to virt machine")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240531202759.911601-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We'll change the aplic DT nodename in the next patch and the name is
hardcoded in 2 different functions. Create a helper to change a single
place later.
While we're at it, in create_fdt_socket_aplic(), move 'aplic_name'
inside the conditional to avoid allocating a string that won't be used
when socket == NULL.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240531202759.911601-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We need #address-cells properties in all interrupt controllers that are
referred by an interrupt-map [1]. For the RISC-V machine, both PLIC and
APLIC controllers must have this property.
PLIC already sets it in create_fdt_socket_plic(). Set the property for
APLIC in create_fdt_one_aplic().
[1] https://lore.kernel.org/linux-arm-kernel/CAL_JsqJE15D-xXxmELsmuD+JQHZzxGzdXvikChn6KFWqk6NzPw@mail.gmail.com/
Suggested-by: Anup Patel <apatel@ventanamicro.com>
Fixes: e6faee6585 ("hw/riscv: virt: Add optional AIA APLIC support to virt machine")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240531202759.911601-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
'uuid_encoded' is always true, remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240617071118.60464-12-philmd@linaro.org>
sprintf() is deprecated on Darwin since macOS 13.0 / XCode 14.1.
Use g_strdup_printf instead.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[rth: Use g_strdup_printf]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240412073346.458116-26-richard.henderson@linaro.org>
The timebase-frequency of guest OS should be the same with host
machine. The timebase-frequency value in DTS should be got from
hypervisor when using KVM acceleration.
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Message-ID: <20240314061510.9800-1-yongxuan.wang@sifive.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240314152302.2324164-14-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
clean up smbios_set_defaults() which is reused by legacy
and non legacy machines from being aware of 'legacy' notion
and need to turn it off. And push legacy handling up to
PC machine code where it's relevant.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Acked-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240314152302.2324164-7-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
