When a group interrupt cannot be delivered, we need to:
- increment the backlog counter for the group in the NVG table
(if the END is configured to keep a backlog).
- start a broadcast operation to set the LSMFB field on matching CPUs
which can't take the interrupt now because they're running at too
high a priority.
[npiggin: squash in fixes from milesg]
[milesg: only load the NVP if the END is !ignore]
[milesg: always broadcast backlog, not only when there are precluded VPs]
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The default PNOR image is erased and not recognised by skiboot, so NVRAM
gets disabled. This change adds a tiny pnor file that is a proper FFS
image with a formatted NVRAM partition. This is recognised by skiboot and
will persist across machine reboots.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The BMC HIOMAP PNOR access protocol has certain limits on PNOR addresses
and sizes. Add some sanity checks for these so we don't get strange
behaviour.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
LPC FW address space is a 256MB (28-bit) region to one of 16-devices
that are selected with the IDSEL register. Implement this by making
the ISA FW address space 4GB, and move the 256MB OPB alias within
that space according to IDSEL.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
If nothing responds to an LPC access, the LPC host controller should
set an IRQSTAT error. Model this behaviour.
skiboot uses this error to "probe" LPC accesses, among other things to
determine if a SuperIO chip is present. After this change it recognizes
there is no SuperIO present and does not keep trying to access it.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The LPC model has only supported serirqs (ISA device IRQs), however
there are internal sources that can raise other interrupts. Update the
device to handle these interrupt sources.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The OCC is an On Chip Controller that handles various thermal and power
management. It is a PPC405 microcontroller that runs its own firmware
which is out of scope of the powernv machine model. Some dynamic
behaviour and interfaces that are important for host CPU testing can be
implemented with a much simpler state machine.
This change adds a 100ms timer that ticks through a simple state machine
that looks for "OCC command requests" coming from host firmware, and
responds to them.
For now the powercap command is implemented because that is used by
OPAL and exported to Linux and is easy to test.
$ F=/sys/firmware/opal/powercap/system-powercap/powercap-current
$ cat $F
100
$ echo 50 | sudo tee $F
50
$ cat $F
50
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
OCC pstate frequencies are in kHz, so the OCC data was 3-4MHz. Upgrade
to GHz. Make each pstate have a different frequency.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The HOMER is a region of memory used by host and firmware and
microconrollers. It has very little logic by itself, just some BAR
registers. Users of this memory should operate on it rather than
have HOMER implement them with MMIO registers, which is not the
right model.
This change switches the implementation of HOMER from MMIO to RAM,
and moves the OCC register implementation to in-memory structure
accesses performed by the OCC model.
This has the downside that access to unimplemented regions of HOMER
are no longer flagged. Perhaps that could be done by adding a memory
region for HOMER, and ram subregions under that for each implemented
part. But for now this takes the simpler approach.
Note: This brings some data structure definitions from skiboot, which
does not match QEMU coding style but is not changed to make comparisons
and updates simpler.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Use defines for the OCCMISC register bits, and add a comment about the
IRQ request bit, which QEMU may not model quite correctly.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Put HOMER memory region base and size into the class, to allow more
code-reuse between different machines in later changes.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The commit to fix the OCC common area sensor mappings didn't update the
register offsets to match.
Before this change, skiboot reports:
[ 0.347100086,3] OCC: Chip 0 sensor data invalid
Afterward, there is no error and the sensor_groups directory appears
under /sys/firmware/opal/.
The SLW_IMAGE_BASE address looks like a workaround to intercept firmware
memory accesses, but that does not seem to be required now (and would
have been broken by the OCC common area region mapping change anyway).
So it can be removed.
Fixes: 3a1b70b66b ("ppc/pnv: Fix OCC common area region mapping")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
HOMER memory implements some dummy registers that return a nonsense
value to satisfy skiboot accesses caused by "SLW" init and register
save/restore programming that has never worked under QEMU:
[ 0.265000943,3] SLW: Failed to set HRMOR for CPU 0,RC=0x1
[ 0.265356988,3] Disabling deep stop states
To simplify a later change to implement HOMER as a RAM area, make
these return zero, which has the same result.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The HOMER OCC registers seem to have bitrotted and fail for various
reasons on powernv8, 9, and 10.
The major problems are that POWER8 has the wrong version value and its
pstate ordering is incorrect. POWER9/10 have not set the OCC state to
active. Non-zero chips are also set to OCC slaves for POWER9/10.
Unfortunately skiboot has also bitrotted and requires fixes that are
not yet in the bios files to run. With a patched skiboot, before this
change, powernv9/10 report:
[ 0.262050394,3] OCC: Chip: 0: OCC not active
[ 0.262128603,3] OCC: Initialization on all chips did not complete(timed out)
powernv8 reports:
[ 0.173572100,3] OCC: Unknown OCC-OPAL interface version.
[ 0.173812059,3] OCC: Initialization on all chips did not complete(timed out)
After this patch, all report:
[ 0.176815668,5] OCC: All Chip Rdy after 0 ms
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Each non-core chiplet on a chip has a "pervasive chiplet" unit and its
xscom register set. This adds support for PHB4/5.
skiboot reads the CPLT_CONF1 register in __phb4/5_get_max_link_width(),
which shows up as unimplemented xscom reads. Set a value in PCI CONF1
register's link-width field to demonstrate skiboot doing something
interesting with it.
In the bigger picture, it might be better to model the pervasive
chiplet type as parent that each non-core chiplet model derives from.
For now this is enough to get the PHB registers implemented and working
for skiboot, and provides a second example (after the N1 chiplet) that
will help if the design is reworked as such.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The ref405ep machine is the only PPC 405 machine. Drop all support by
removing the SoC and associated devices as-well as the machine.
Link: https://lore.kernel.org/qemu-devel/20250110141800.1587589-3-clg@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <20250204080649.836155-3-clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Move CPU TLB related methods to "exec/cputlb.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20241114011310.3615-19-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Restrict the tb_flush() call to TCG. Assert we are using KVM or TCG.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-Id: <20250127102620.39159-3-philmd@linaro.org>
Currently we handle the 'dumpdtb' machine sub-option ad-hoc in every
board model that has an FDT. It's up to the board code to make sure
it calls qemu_fdt_dumpdtb() in the right place.
This means we're inconsistent and often just ignore the user's
command line argument:
* if the board doesn't have an FDT at all
* if the board supports FDT, but there happens not to be one
present (usually because of a missing -fdt option)
This isn't very helpful because it gives the user no clue why their
option was ignored.
However, in order to support the QMP/HMP dumpdtb commands we require
now that every FDT machine stores a pointer to the FDT in
MachineState::fdt. This means we can handle -machine dumpdtb
centrally by calling the qmp_dumpdtb() function, unifying its
handling with the QMP/HMP commands. All the board code calls to
qemu_fdt_dumpdtb() can then be removed.
For this commit we retain the existing behaviour that if there
is no FDT we silently ignore the -machine dumpdtb option.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Features:
SR-IOV emulation for pci
virtio-mem-pci support for s390
interleave support for cxl
big endian support for vdpa svq
new QAPI events for vhost-user
Also vIOMMU reset order fixups are in.
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAme4b8sPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpHKcIAKPJsVqPdda2dJ7b7FdyRT0Q+uwezXqaGHd4
7Lzih1wsxYNkwIAyPtEb76/21qiS7BluqlUCfCB66R9xWjP5/KfvAFj4/r4AEduE
fxAgYzotNpv55zcRbcflMyvQ42WGiZZHC+o5Lp7vDXUP3pIyHrl0Ydh5WmcD+hwS
BjXvda58TirQpPJ7rUL+sSfLih17zQkkDcfv5/AgorDy1wK09RBKwMx/gq7wG8yJ
twy8eBY2CmfmFD7eTM+EKqBD2T0kwLEeLfS/F/tl5Fyg6lAiYgYtCbGLpAmWErsg
XZvfZmwqL7CNzWexGvPFnnLyqwC33WUP0k0kT88Y5wh3/h98blw=
=tej8
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: features, fixes, cleanups
Features:
SR-IOV emulation for pci
virtio-mem-pci support for s390
interleave support for cxl
big endian support for vdpa svq
new QAPI events for vhost-user
Also vIOMMU reset order fixups are in.
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAme4b8sPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpHKcIAKPJsVqPdda2dJ7b7FdyRT0Q+uwezXqaGHd4
# 7Lzih1wsxYNkwIAyPtEb76/21qiS7BluqlUCfCB66R9xWjP5/KfvAFj4/r4AEduE
# fxAgYzotNpv55zcRbcflMyvQ42WGiZZHC+o5Lp7vDXUP3pIyHrl0Ydh5WmcD+hwS
# BjXvda58TirQpPJ7rUL+sSfLih17zQkkDcfv5/AgorDy1wK09RBKwMx/gq7wG8yJ
# twy8eBY2CmfmFD7eTM+EKqBD2T0kwLEeLfS/F/tl5Fyg6lAiYgYtCbGLpAmWErsg
# XZvfZmwqL7CNzWexGvPFnnLyqwC33WUP0k0kT88Y5wh3/h98blw=
# =tej8
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 21 Feb 2025 20:21:31 HKT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (41 commits)
docs/devel/reset: Document reset expectations for DMA and IOMMU
hw/vfio/common: Add a trace point in vfio_reset_handler
hw/arm/smmuv3: Move reset to exit phase
hw/i386/intel-iommu: Migrate to 3-phase reset
hw/virtio/virtio-iommu: Migrate to 3-phase reset
vhost-user-snd: correct the calculation of config_size
net: vhost-user: add QAPI events to report connection state
hw/virtio/virtio-nsm: Respond with correct length
vdpa: Fix endian bugs in shadow virtqueue
MAINTAINERS: add more files to `vhost`
cryptodev/vhost: allocate CryptoDevBackendVhost using g_mem0()
vhost-iova-tree: Update documentation
vhost-iova-tree, svq: Implement GPA->IOVA & partial IOVA->HVA trees
vhost-iova-tree: Implement an IOVA-only tree
amd_iommu: Use correct bitmask to set capability BAR
amd_iommu: Use correct DTE field for interrupt passthrough
hw/virtio: reset virtio balloon stats on machine reset
mem/cxl_type3: support 3, 6, 12 and 16 interleave ways
hw/mem/cxl_type3: Ensure errp is set on realization failure
hw/mem/cxl_type3: Fix special_ops memory leak on msix_init_exclusive_bar() failure
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A PF may automatically create VFs and the PF may be function 0.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Message-Id: <20250116-reuse-v20-2-7cb370606368@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Disabled means it is a disabled SR-IOV VF and hidden from the guest.
Do not create DT when starting the system and also keep the disabled PCI
device not linked to DRC, which generates DT in case of hotplug.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Shivaprasad G Bhat<sbhat@linux.ibm.com>
Tested-by: Shivaprasad G Bhat<sbhat@linux.ibm.com>
Message-Id: <20250116-reuse-v20-1-7cb370606368@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Replace the DEVICE_NATIVE_ENDIAN MemoryRegionOps by a pair of
DEVICE_LITTLE_ENDIAN / DEVICE_BIG_ENDIAN.
Add the "endianness" property to select the device endianness.
This property is unspecified by default, and machines need to
set it explicitly.
Set the proper endianness for each machine using the device.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250213122217.62654-5-philmd@linaro.org>
Replace the DEVICE_NATIVE_ENDIAN MemoryRegionOps by a pair of
DEVICE_LITTLE_ENDIAN / DEVICE_BIG_ENDIAN.
Add the "endianness" property to select the device endianness.
This property is unspecified by default, and machines need to
set it explicitly.
Set the proper endianness for each machine using the device.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250213122217.62654-3-philmd@linaro.org>
A number of machines create an if=sd drive by default even though
they lack an SD bus, and therefore cannot use the drive.
This drive is created when the machine sets flag
@auto_create_sdcard.
See for example running HMP "info block" on the HPPA C3700 machine:
$ qemu-system-hppa -M C3700 -monitor stdio -S
(qemu) info block
floppy0: [not inserted]
Removable device: not locked, tray closed
sd0: [not inserted]
Removable device: not locked, tray closed
$ qemu-system-hppa -M C3700 -sd /bin/sh
qemu-system-hppa: -sd /bin/sh: machine type does not support if=sd,bus=0,unit=0
Delete that from machines that lack an SD bus.
Note, only the ARM and RISCV targets use such feature:
$ git grep -wl IF_SD hw | cut -d/ -f-2 | sort -u
hw/arm
hw/riscv
$
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20250204200934.65279-5-philmd@linaro.org>
Invert the 'no_sdcard' logic, renaming it as the more explicit
"auto_create_sdcard". Machines are supposed to create a SD Card
drive when this flag is set. In many cases it doesn't make much
sense (as boards don't expose SD Card host controller), but this
is patch only aims to expose that nonsense; so no logical change
intended (mechanical patch using gsed).
Most of the changes are:
- mc->no_sdcard = ON_OFF_AUTO_OFF;
+ mc->auto_create_sdcard = true;
Except in
. hw/core/null-machine.c
. hw/arm/xilinx_zynq.c
. hw/s390x/s390-virtio-ccw.c
where the disabled option is manually removed (since default):
- mc->no_sdcard = ON_OFF_AUTO_ON;
+ mc->auto_create_sdcard = false;
- mc->auto_create_sdcard = false;
and in system/vl.c we change the 'default_sdcard' type to boolean.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20250204200934.65279-4-philmd@linaro.org>
Update MachineClass::no_sdcard default implicit AUTO
initialization to explicit OFF. This flag is consumed
in system/vl.c::qemu_disable_default_devices(). Use
this place to assert we don't have anymore AUTO state.
In hw/ppc/e500.c we add the ppce500_machine_class_init()
method to initialize once all the inherited classes.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20250204200934.65279-3-philmd@linaro.org>
Replace g_strdup_printf("%s", value) -> g_strdup(value)
to avoid unnecessary string formatting.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
- add a check-rust test to docker builds
- re-factor the qtest logic to be cleaner
- fix tests to not clock_step when no timers enabled
- roll-up log prefix into qtest_send
- cleaner error reporting when qtest_clock_set fails
- revert old deadlock fix now tests are updated
- only run full set of migration tests under HW acceleration
- support late attachment to user-mode gdbstubs
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmeqBSsACgkQ+9DbCVqe
KkQS/Af+K0hpdGc1msiuMsqmuESBvhoQniYZFLN1/pwe2KpG8i/+fq2fsCuxJhJ1
2TzPH7aj54p9MGCZf2k9JLhO22XldN+oezZMc1crhoWK0AtrWhnLs58I2oEPIsUo
NmGO6Zfm98ge89o2y8GCvd0QXAtUf+jduDKnW0mfnOnw+w/mky5KzWS7/1091VGW
42LSY4KnqgdLSqLyuLBOrgADEjB1ChWS4/bSC+kEYSGrmNQB+n1KeIzzlJBGpOr0
Z9yzmhMCm7TWdkFNPmnVfYH/7ZUNcpv6PtQSpkku4f6b/gybyvJBknHpM4i+Gpb5
87wSjljrCpdNm/9KFRjiJuUWdS/jCg==
=UF0n
-----END PGP SIGNATURE-----
Merge tag 'pull-10.0-testing-and-gdstub-updates-100225-1' of https://gitlab.com/stsquad/qemu into staging
testing and gdbstub updates:
- add a check-rust test to docker builds
- re-factor the qtest logic to be cleaner
- fix tests to not clock_step when no timers enabled
- roll-up log prefix into qtest_send
- cleaner error reporting when qtest_clock_set fails
- revert old deadlock fix now tests are updated
- only run full set of migration tests under HW acceleration
- support late attachment to user-mode gdbstubs
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmeqBSsACgkQ+9DbCVqe
# KkQS/Af+K0hpdGc1msiuMsqmuESBvhoQniYZFLN1/pwe2KpG8i/+fq2fsCuxJhJ1
# 2TzPH7aj54p9MGCZf2k9JLhO22XldN+oezZMc1crhoWK0AtrWhnLs58I2oEPIsUo
# NmGO6Zfm98ge89o2y8GCvd0QXAtUf+jduDKnW0mfnOnw+w/mky5KzWS7/1091VGW
# 42LSY4KnqgdLSqLyuLBOrgADEjB1ChWS4/bSC+kEYSGrmNQB+n1KeIzzlJBGpOr0
# Z9yzmhMCm7TWdkFNPmnVfYH/7ZUNcpv6PtQSpkku4f6b/gybyvJBknHpM4i+Gpb5
# 87wSjljrCpdNm/9KFRjiJuUWdS/jCg==
# =UF0n
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 10 Feb 2025 08:54:51 EST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-10.0-testing-and-gdstub-updates-100225-1' of https://gitlab.com/stsquad/qemu:
tests/tcg: Add late gdbstub attach test
docs/user: Document the %d placeholder and suspend=n QEMU_GDB features
gdbstub: Allow late attachment
osdep: Introduce qemu_kill_thread()
user: Introduce host_interrupt_signal
user: Introduce user/signal.h
gdbstub: Try unlinking the unix socket before binding
gdbstub: Allow the %d placeholder in the socket path
tests/qtest/migration: Pick smoke tests
tests/qtest/migration: Add --full option
Revert "util/timer: avoid deadlock when shutting down"
tests/qtest: tighten up the checks on clock_step
tests/qtest: rename qtest_send_prefix and roll-up into qtest_send
tests/qtest: simplify qtest_process_inbuf
tests/qtest: don't step clock at start of npcm7xx periodic IRQ test
tests/qtest: don't attempt to clock_step while waiting for virtio ISR
tests/docker: replicate the check-rust-tools-nightly CI job
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The general expectation is that header files should follow the same
file/path naming scheme as the corresponding source file. There are
various historical exceptions to this practice in QEMU, with one of
the most notable being the include/qapi/qmp/ directory. Most of the
headers there correspond to source files in qobject/.
This patch corrects most of that inconsistency by creating
include/qobject/ and moving the headers for qobject/ there.
This also fixes MAINTAINERS for include/qapi/qmp/dispatch.h:
scripts/get_maintainer.pl now reports "QAPI" instead of "No
maintainers found".
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com> #s390x
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20241118151235.2665921-2-armbru@redhat.com>
[Rebased]
qtest_send_prefix never actually sent something over the chardev, all
it does is print the timestamp to the QTEST_LOG when enabled. So
rename the function, make it static, remove the unused CharDev and
simplify all the call sites by handling that directly with
qtest_send (and qtest_log_send).
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250207153112.3939799-6-alex.bennee@linaro.org>
Rather than passing a boolean 'is_big_endian' argument,
directly pass the ELFDATA, which can be unspecified using
the ELFDATANONE value.
Update the call sites:
0 -> ELFDATA2LSB
1 -> ELFDATA2MSB
TARGET_BIG_ENDIAN -> TARGET_BIG_ENDIAN ? ELFDATA2MSB : ELFDATA2LSB
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250127113824.50177-7-philmd@linaro.org>
"exec/confidential-guest-support.h" is specific to system
emulation, so move it under the system/ namespace.
Mechanical change doing:
$ sed -i \
-e 's,exec/confidential-guest-support.h,sysemu/confidential-guest-support.h,' \
$(git grep -l exec/confidential-guest-support.h)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20241218155913.72288-2-philmd@linaro.org>
Headers in include/sysemu/ are not only related to system
*emulation*, they are also used by virtualization. Rename
as system/ which is clearer.
Files renamed manually then mechanical change using sed tool.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Message-Id: <20241203172445.28576-1-philmd@linaro.org>
QEMU will start to not rely on implicit creations of containers soon. Make
PPC drc devices follow by explicitly create the container whenever a drc
device is realized, dropping container_get() calls.
No functional change intended.
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Daniel Henrique Barboza <danielhb413@gmail.com>
Cc: Harsh Prateek Bora <harshpb@linux.ibm.com>
Cc: qemu-ppc@nongnu.org
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241121192202.4155849-7-peterx@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Now that all of the Property arrays are counted, we can remove
the terminator object from each array. Update the assertions
in device_class_set_props to match.
With struct Property being 88 bytes, this was a rather large
form of terminator. Saves 30k from qemu-system-aarch64.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Link: https://lore.kernel.org/r/20241218134251.4724-21-richard.henderson@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not register an empty set of properties.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Link: https://lore.kernel.org/r/20241218134251.4724-7-richard.henderson@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The MV64361 has two PCI buses one of which is used for AGP on
PegasosII. So far we only emulated the PCI bus on pci.1 but some
graphics cards are only recognised by some guests when connected to
pci.0 corresponding to the AGP port. So far the interrupts were not
routed from pci.0 so this patch fixes that allowing the use of both
PCI buses. On real board only INTA and INTB are connected for AGP but
to avoid surprises we connect all 4 PCI interrupt lines so pci.0 can
be used for all PCI cards as well.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
In case when vcpus are explicitly enabled/disabled in a non-consecutive
order within a libvirt xml, it results in a drc index mismatch during
vcpu hotplug later because the existing logic uses vcpu id to derive the
corresponding drc index which is not correct. Use env->core_index to
derive a vcpu's drc index as appropriate to fix this issue.
For ex, for the given libvirt xml config:
<vcpus>
<vcpu id='0' enabled='yes' hotpluggable='no'/>
<vcpu id='1' enabled='yes' hotpluggable='yes'/>
<vcpu id='2' enabled='no' hotpluggable='yes'/>
<vcpu id='3' enabled='yes' hotpluggable='yes'/>
<vcpu id='4' enabled='no' hotpluggable='yes'/>
<vcpu id='5' enabled='yes' hotpluggable='yes'/>
<vcpu id='6' enabled='no' hotpluggable='yes'/>
<vcpu id='7' enabled='no' hotpluggable='yes'/>
</vcpus>
We see below error on guest console with "virsh setvcpus <domain> 5" :
pseries-hotplug-cpu: CPU with drc index 10000002 already exists
This patch fixes the issue by using correct drc index for explicitly
enabled vcpus during init.
Reported-by: Anushree Mathur <anushree.mathur@linux.vnet.ibm.com>
Tested-by: Anushree Mathur <anushree.mathur@linux.vnet.ibm.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
By convention, xscom regions get a xscom- prefix.
Fixes: 1adf24708b ("hw/ppc: Add pnv nest pervasive common chiplet model")
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The THREAD_SIBLING_FOREACH macro wasn't excluding threads from other
chips. Add chip_index field to the thread state and add a check for the
new field in the macro.
Fixes: b769d4c8f4 ("target/ppc: Add initial flags and helpers for SMT support")
Signed-off-by: Glenn Miles <milesg@linux.ibm.com>
[npiggin: set chip_index for spapr too]
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
powernv CPUs have a set of control registers that can stop, start, and
do other things to control a thread's execution.
Using this interface to stop a thread puts it into a particular state
that can be queried, and is distinguishable from other things that might
stop the CPU (e.g., going idle, or being debugged via gdb, or stopped by
the monitor).
Add a new flag that can speficially distinguish this state where it is
stopped with control registers. This solves some hangs when rebooting
powernv machines when skiboot is modified to allow QEMU to use the CPU
control facility (that uses controls to bring all secondaries to a known
state).
Fixes: c889195508 ("ppc/pnv: Implement POWER10 PC xscom registers for direct controls")
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-ID: <20241103133412.73536-19-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Populate this read-only register with some arbitrary values which avoids
U-Boot's get_clocks() to hang().
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-ID: <20241103133412.73536-11-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
