There is no double-rounding bug here, because the result is
merely an estimate to within 1 part in 256, but perform the
operation with float64r32_div for consistency.
Use float_flag_invalid_snan instead of recomputing the
snan-ness of the operand.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211119160502.17432-34-richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There is no double-rounding bug here, because the result is
merely an estimate to within 1 part in 32, but perform the
operation with float64r32_div for consistency.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211119160502.17432-33-richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Use float64r32_mul. Fixes a double-rounding issue with performing
the compuation in float64 and then rounding afterward.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211119160502.17432-32-richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Use float64r32_{add,sub,div}. Fixes a double-rounding issue with
performing the compuation in float64 and then rounding afterward.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211119160502.17432-31-richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Use float64r32_sqrt. Fixes a double-rounding issue with performing
the compuation in float64 and then rounding afterward.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211119160502.17432-30-richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Use float64r32_muladd. Fixes a double-rounding issue with performing
the compuation in float64 and then rounding afterward.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211119160502.17432-29-richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Use float_flag_invalid_snan instead of recomputing
the snan-ness of the operand.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211119160502.17432-27-richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Use float_flag_invalid_snan instead of recomputing
the snan-ness of the operand.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211119160502.17432-26-richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Now that vxsqrt and vxsnan are computed directly by softfloat,
we don't need to recompute it. Split out float_invalid_op_sqrt
to be used in several places. This fixes VSX_SQRT, which did
not order its tests correctly to eliminate NaN with sign set.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211119160502.17432-25-richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
We only needed one ieee arithmetic operation to raise
exceptions. To convert back to register form, we can
use our simpler non-arithmetic function.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211119160502.17432-24-richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Now that vxsnan is computed directly by softfloat,
we don't need to recompute it.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211119160502.17432-23-richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Calling helper_frsp directly from other helpers generates
the incorrect retaddr. Split out a helper that takes the
retaddr as a parameter.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211119160502.17432-22-richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
We will process flags other than in valid in helper_float_check_status,
which is invoked after the writeback to FRT.
Fixes a bug in which FRT is not written when OE/UE/XE are enabled.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211119160502.17432-21-richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Create a common function for all of the madd helpers.
Let the compiler tail call or inline as it chooses.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211119160502.17432-20-richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Now that vximz, vxisi, and vxsnan are computed directly by
softfloat, we don't need to recompute it. This replaces the
separate float{32,64}_maddsub_update_excp functions with a
single float_invalid_op_madd function.
Fix VSX_MADD by passing sfprf to float_invalid_op_madd,
whereas the previous *_maddsub_update_excp assumed it true.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211119160502.17432-19-richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Let float64_round_to_int detect and silence snans.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211119160502.17432-18-richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
In GEN_FLOAT_B, we called helper_reset_fpstatus immediately
before calling helper_fri*. Therefore get_float_exception_flags
is known to be zero, and this code can be simplified.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211119160502.17432-17-richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This is the proper type for the enumeration.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211119160502.17432-16-richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There's no reason the callers can't tail call to one function.
Leave it up to the compiler either way.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211119160502.17432-15-richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
We were returning nanval for any instance of invalid being set,
but that is an incorrect for VXCVI. This failure can be seen
in the float_convs tests.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211119160502.17432-14-richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Now that vxsnan is computed directly by softfloat,
we don't need to recompute it via classes.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211119160502.17432-13-richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Fixes a bug in which e.g XE enabled causes inexact to be raised
before the writeback to the architectural register.
All of the users of GEN_FLOAT_B either set set_fprf, or are one
of the convert-to-integer instructions that require this behaviour.
Split out the two gen_helper_* calls in gen_compute_fprf_float64
and protect only the first with set_fprf.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211119160502.17432-12-richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Now that vxidi, vxzdz, and vxsnan are computed directly by
softfloat, we don't need to recompute it via classes.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211119160502.17432-11-richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Now that vximz and vxsnan are computed directly by
softfloat, we don't need to recompute it via classes.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211119160502.17432-10-richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Now that vxisi and vxsnan are computed directly by
softfloat, we don't need to recompute it via classes.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211119160502.17432-9-richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This commit fixes the difference reported in the bug in the reserved
bit 52, it does this by adding this bit to the mask of bits to not be
directly altered in the ppc_store_fpscr function (the hardware used to
compare to QEMU was a Power9).
The bits 0 to 27 were also added to the mask, as they are marked as
reserved in the PowerISA and bit 28 is a reserved extension of the DRN
field (bits 29:31) but can't be set using mtfsfi, while the other DRN
bits may be set using mtfsfi instruction, so bit 28 was also added to
the mask.
Although this is a difference reported in the bug, since it's a reserved
bit it may be a "don't care" case, as put in the bug report. Looking at
the ISA it doesn't explicitly mention this bit can't be set, like it
does for FEX and VX, so I'm unsure if this is necessary.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/266
Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Message-Id: <20211201163808.440385-4-lucas.araujo@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
mtfsf, mtfsfi and mtfsb1 instructions call helper_float_check_status
after updating the value of FPSCR, but helper_float_check_status
checks fp_status and fp_status isn't updated based on FPSCR and
since the value of fp_status is reset earlier in the instruction,
it's always 0.
Because of this helper_float_check_status would change the FI bit to 0
as this bit checks if the last operation was inexact and
float_flag_inexact is always 0.
These instructions also don't throw exceptions correctly since
helper_float_check_status throw exceptions based on fp_status.
This commit created a new helper, helper_fpscr_check_status that checks
FPSCR value instead of fp_status and checks for a larger variety of
exceptions than do_float_check_status.
Since fp_status isn't used, gen_reset_fpstatus() was removed.
The hardware used to compare QEMU's behavior to was a Power9.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Message-Id: <20211201163808.440385-2-lucas.araujo@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
QEMU coding style mandates to not use Linux kernel internal
types for scalars types. Replace __u32 by uint32_t.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211116193955.2793171-1-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The CPNC portion of the diag318 data is erroneously reset during an
initial CPU reset caused by SIGP. Let's go ahead and relocate the
diag318_info field within the CPUS390XState struct such that it is
only zeroed during a clear reset. This way, the CPNC will be retained
for each VCPU in the configuration after the diag318 instruction
has been invoked.
The s390_machine_reset code already takes care of zeroing the diag318
data on VM resets, which also cover resets caused by diag308.
Fixes: fabdada935 ("s390: guest support for diagnose 0x318")
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Message-Id: <20211117152303.627969-1-walling@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The calculation of the length of TLB range invalidate operations
in tlbi_aa64_range_get_length() is incorrect in two ways:
* the NUM field is 5 bits, but we read only 4 bits
* we miscalculate the page_shift value, because of an
off-by-one error:
TG 0b00 is invalid
TG 0b01 is 4K granule size == 4096 == 2^12
TG 0b10 is 16K granule size == 16384 == 2^14
TG 0b11 is 64K granule size == 65536 == 2^16
so page_shift should be (TG - 1) * 2 + 12
Thanks to the bug report submitter Cha HyunSoo for identifying
both these errors.
Fixes: 84940ed825 ("target/arm: Add support for FEAT_TLBIRANGE")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/734
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20211130173257.1274194-1-peter.maydell@linaro.org
The qemu-common.h header is not supposed to be included from any
other header files, only from .c files (as documented in a comment at
the start of it).
Nothing actually relies on target/rx/cpu.h including it, so we can
just drop the include.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-id: 20211129200510.1233037-4-peter.maydell@linaro.org
The qemu-common.h header is not supposed to be included from any
other header files, only from .c files (as documented in a comment at
the start of it).
Move the include to linux-user/hexagon/cpu_loop.c, which needs it for
the declaration of cpu_exec_step_atomic().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-id: 20211129200510.1233037-3-peter.maydell@linaro.org
In the SSE decode function gen_sse(), we combine a byte
'b' and a value 'b1' which can be [0..3], and switch on them:
b |= (b1 << 8);
switch (b) {
...
default:
unknown_op:
gen_unknown_opcode(env, s);
return;
}
In three cases inside this switch, we were then also checking for
"if (b1 >= 2) { goto unknown_op; }".
However, this can never happen, because the 'case' values in each place
are 0x0nn or 0x1nn and the switch will have directed the b1 == (2, 3)
cases to the default already.
This check was added in commit c045af25a5 in 2010; the added code
was unnecessary then as well, and was apparently intended only to
ensure that we never accidentally ended up indexing off the end
of an sse_op_table with only 2 entries as a result of future bugs
in the decode logic.
Change the checks to assert() instead, and make sure they're always
immediately before the array access they are protecting.
Fixes: Coverity CID 1460207
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Both single-step and pc alignment faults have priority over
breakpoint exceptions.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Misaligned thumb PC is architecturally impossible.
Assert is better than proceeding, in case we've missed
something somewhere.
Expand a comment about aligning the pc in gdbstub.
Fail an incoming migrate if a thumb pc is misaligned.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For A64, any input to an indirect branch can cause this.
For A32, many indirect branch paths force the branch to be aligned,
but BXWritePC does not. This includes the BX instruction but also
other interworking changes to PC. Prior to v8, this case is UNDEFINED.
With v8, this is CONSTRAINED UNPREDICTABLE and may either raise an
exception or force align the PC.
We choose to raise an exception because we have the infrastructure,
it makes the generated code for gen_bx simpler, and it has the
possibility of catching more guest bugs.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We will reuse this section of arm_deliver_fault for
raising pc alignment faults.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The size of the code covered by a TranslationBlock cannot be 0;
this is checked via assert in tb_gen_code.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Create arm_check_ss_active and arm_check_kernelpage.
Reverse the order of the tests. While it doesn't matter in practice,
because only user-only has a kernel page and user-only never sets
ss_active, ss_active has priority over execution exceptions and it
is best to keep them in the proper order.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When updating the R bit of a PTE, the Hash64 MMU was using a wrong byte
offset, causing the first byte of the adjacent PTE to be corrupted.
This caused a panic when booting FreeBSD, using the Hash MMU.
Fixes: a2dd4e83e7 ("ppc/hash64: Rework R and C bit updates")
Signed-off-by: Leandro Lupori <leandro.lupori@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This reverts commit 9fcd15b919.
This change turns out to cause regressions, for instance on the
imx6ul boards as described here:
https://lore.kernel.org/qemu-devel/c8b89685-7490-328b-51a3-48711c140a84@tribudubois.net/
The primary cause of that regression is that the guest code running
at EL3 expects SMCs (not related to PSCI) to do what they would if
our PSCI emulation was not present at all, but after this change
they instead set a value in R0/X0 and continue.
We could fix that by a refactoring that allowed us to only turn on
the PSCI emulation if we weren't booting the guest at EL3, but there
is a more tangled problem with the highbank board, which:
(1) wants to enable PSCI emulation
(2) has a bit of guest code that it wants to run at EL3 and
to perform SMC calls that trap to the monitor vector table:
this is the boot stub code that is written to memory by
arm_write_secure_board_setup_dummy_smc() and which the
highbank board enables by setting bootinfo->secure_board_setup
We can't satisfy both of those and also have the PSCI emulation
handle all SMC instruction executions regardless of function
identifier value.
This is too tricky to try to sort out before 6.2 is released;
revert this commit so we can take the time to get it right in
the 7.0 release.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20211119163419.557623-1-peter.maydell@linaro.org
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmGXb2kUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNkQggArLP8V1vL9XW9LJ6v4UdO4dp78MRb
mP5zZhzY6CZ9NnbLW3rtS8GLrQ7XJdHl4huVIckIF3HW+TOBas2gXOiyWdskZRFS
UGSoeejj2RHmTzBKWZN77G/GB0ElyKt3wvXeCEx0F8yiJXZhkw6n6tp3U/lGnic3
sJmniTBZ+m3GGtrAaEL11x8ITdtdGEE4uIhspqN8X0kU+WkSsklm8+GAORzMpWGq
Fqo46dd1C+st1GvbDOnghltYOEPPyKE6pZYOnZwB8X8hi01Ex53wXBXl98G8r8rt
qA6P0lc5Eh8E3M7xm+kJBw1XNSkxjQioJ1SElmQFW5w5rVtYVSDEsaL4MQ==
=3kjz
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
Bugfixes for 6.2.
# gpg: Signature made Fri 19 Nov 2021 10:33:29 AM CET
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
chardev/wctable: don't free the instance in wctablet_chr_finalize
meson.build: Support ncurses on MacOS and OpenBSD
docs: Spell QEMU all caps
qtest/am53c974-test: add test for reset before transfer
esp: ensure that async_len is reset to 0 during esp_hard_reset()
nvmm: Fix support for stable version
meson: fix botched compile check conversions
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
NVMM user version 1 is the version being shipped with netbsd-9,
which is the most recent stable branch of NetBSD. This makes it
possible to use the NVMM accelerator on the most recent NetBSD
release, 9.2, which lacks nvmm_cpu_stop.
(CC'ing maintainers)
Signed-off-by: Nia Alarie <nia@NetBSD.org>
Reviewed-by: Kamil Rytarowski <kamil@netbsd.org>
Message-Id: <YWblCe2J8GwCaV9U@homeworld.netbsd.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use address_space_map/unmap and check for errors.
Signed-off-by: Dov Murik <dovmurik@linux.ibm.com>
Acked-by: Brijesh Singh <brijesh.singh@amd.com>
[Two lines wrapped for length - Daniel]
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
