Change the representation of this field such that it is easy
to set from vector code.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190209033847.9014-11-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Given that we mask bits properly on set, there is no reason
to mask them again on get. We failed to clear the exception
status bits, 0x9f, which means that the wrong value would be
returned on get. Except in the (probably normal) case in which
the set clears all of the bits.
Simplify the code in set to also clear the RES0 bits.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190209033847.9014-10-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Minimize the code within a macro by splitting out a helper function.
Use deposit32 instead of manual bit manipulation.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190209033847.9014-9-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The components of this register is stored in several
different locations.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190209033847.9014-7-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
At the moment the Arm implementations of kvm_arch_{get,put}_registers()
don't support having QEMU change the values of system registers
(aka coprocessor registers for AArch32). This is because although
kvm_arch_get_registers() calls write_list_to_cpustate() to
update the CPU state struct fields (so QEMU code can read the
values in the usual way), kvm_arch_put_registers() does not
call write_cpustate_to_list(), meaning that any changes to
the CPU state struct fields will not be passed back to KVM.
The rationale for this design is documented in a comment in the
AArch32 kvm_arch_put_registers() -- writing the values in the
cpregs list into the CPU state struct is "lossy" because the
write of a register might not succeed, and so if we blindly
copy the CPU state values back again we will incorrectly
change register values for the guest. The assumption was that
no QEMU code would need to write to the registers.
However, when we implemented debug support for KVM guests, we
broke that assumption: the code to handle "set the guest up
to take a breakpoint exception" does so by updating various
guest registers including ESR_EL1.
Support this by making kvm_arch_put_registers() synchronize
CPU state back into the list. We sync only those registers
where the initial write succeeds, which should be sufficient.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Dongjiu Geng <gengdongjiu@huawei.com>
There are a whole bunch more registers in the CPUID space which are
currently not used but are exposed as RAZ. To avoid too much
duplication we expand ARMCPRegUserSpaceInfo to understand glob
patterns so we only need one entry to tweak whole ranges of registers.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190205190224.2198-5-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As this is a single register we could expose it with a simple ifdef
but we use the existing modify_arm_cp_regs mechanism for consistency.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190205190224.2198-4-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A number of CPUID registers are exposed to userspace by modern Linux
kernels thanks to the "ARM64 CPU Feature Registers" ABI. For QEMU's
user-mode emulation we don't need to emulate the kernels trap but just
return the value the trap would have done. To avoid too much #ifdef
hackery we process ARMCPRegInfo with a new helper (modify_arm_cp_regs)
before defining the registers. The modify routine is driven by a
simple data structure which describes which bits are exported and
which are fixed.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190205190224.2198-3-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Although technically not visible to userspace the kernel does make
them visible via a trap and emulate ABI. We provide a new permission
mask (PL0U_R) which maps to PL0_R for CONFIG_USER builds and adjust
the minimum permission check accordingly.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190205190224.2198-2-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
HACR_EL2 is a register with IMPDEF behaviour, which allows
implementation specific trapping to EL2. Implement it as RAZ/WI,
since QEMU's implementation has no extra traps. This also
matches what h/w implementations like Cortex-A53 and A57 do.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190205181218.8995-1-peter.maydell@linaro.org
The {IOE, DZE, OFE, UFE, IXE, IDE} bits in the FPSCR/FPCR are for
enabling trapped IEEE floating point exceptions (where IEEE exception
conditions cause a CPU exception rather than updating the FPSR status
bits). QEMU doesn't implement this (and nor does the hardware we're
modelling), but for implementations which don't implement trapped
exception handling these control bits are supposed to be RAZ/WI.
This allows guest code to test for whether the feature is present
by trying to write to the bit and checking whether it sticks.
QEMU is incorrectly making these bits read as written. Make them
RAZ/WI as the architecture requires.
In particular this was causing problems for the NetBSD automatic
test suite.
Reported-by: Martin Husemann <martin@netbsd.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190131130700.28392-1-peter.maydell@linaro.org
Enables, but does not turn on, TBI for CONFIG_USER_ONLY.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190204132126.3255-4-richard.henderson@linaro.org
[PMM: adjusted #ifdeffery to placate clang, which otherwise complains
about static functions that are unused in the CONFIG_USER_ONLY build]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Split out gen_top_byte_ignore in preparation of handling these
data accesses; the new tbflags field is not yet honored.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190204132126.3255-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Caching the bit means that we will not have to re-walk the
page tables to look up the bit during translation.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190128223118.5255-6-richard.henderson@linaro.org
[PMM: no need to OR in guarded bit status]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190128223118.5255-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These bits become writable with the ARMv8.3-PAuth extension.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190129143511.12311-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make PMU overflow interrupts more accurate by using a timer to predict
when they will overflow rather than waiting for an event to occur which
allows us to otherwise check them.
Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190124162401.5111-3-aaron@os.amperecomputing.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Whenever we notice that a counter overflow has occurred, send an
interrupt. This is made more reliable with the addition of a timer in a
follow-on commit.
Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190124162401.5111-2-aaron@os.amperecomputing.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A bug was introduced during a respin of:
commit 57a4a11b2b
target/arm: Add array for supported PMU events, generate PMCEID[01]_EL0
This patch introduced two calls to get_pmceid() during CPU
initialization - one each for PMCEID0 and PMCEID1. In addition to
building the register values, get_pmceid() clears an internal array
mapping event numbers to their implementations (supported_event_map)
before rebuilding it. This is an optimization since much of the logic is
shared. However, since it was called twice, the contents of
supported_event_map reflect only the events in PMCEID1 (the second call
to get_pmceid()).
Fix this bug by moving the initialization of PMCEID0 and PMCEID1 back
into a single function call, and name it more appropriately since it is
doing more than simply generating the contents of the PMCEID[01]
registers.
Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190123195814.29253-1-aaron@os.amperecomputing.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The current behavior of v8m_security_lookup in helper.c only checks whether the
IDAU specifies a higher security if the SAU is enabled. If SAU.ALLNS is set to
1, this will lead to addresses being treated as non-secure, even though the
IDAU indicates that they must be secure.
This patch changes the behavior to also check the IDAU if the SAU is currently
disabled.
(This brings the behaviour here into line with the v8M Arm ARM
SecurityCheck() pseudocode.)
Signed-off-by: Thomas Roth <code@stacksmashing.net>
Message-id: CAGGekkuc+-tvp5RJP7CM+Jy_hJF7eiRHZ96132sb=hPPCappKg@mail.gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: added pseudocode ref to the commit message, fixed comment style]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When tsz == 0, aarch32 selects the address space via exclusion,
and there are no "top_bits" remaining that require validation.
Fixes: ba97be9f4a
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190125184913.5970-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This both advertises that we support four counters and enables them
because the pmu_num_counters() reads this value from PMCR.
Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20181211151945.29137-13-aaron@os.amperecomputing.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The instruction event is only enabled when icount is used, cycles are
always supported. Always defining get_cycle_count (but altering its
behavior depending on CONFIG_USER_ONLY) allows us to remove some
CONFIG_USER_ONLY #defines throughout the rest of the code.
Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20181211151945.29137-12-aaron@os.amperecomputing.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add arrays to hold the registers, the definitions themselves, access
functions, and logic to reset counters when PMCR.P is set. Update
filtering code to support counters other than PMCCNTR. Support migration
with raw read/write functions.
Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181211151945.29137-11-aaron@os.amperecomputing.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit doesn't add any supported events, but provides the framework
for adding them. We store the pm_event structs in a simple array, and
provide the mapping from the event numbers to array indexes in the
supported_event_map array. Because the value of PMCEID[01] depends upon
which events are supported at runtime, generate it dynamically.
Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20181211151945.29137-10-aaron@os.amperecomputing.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add an array for PMOVSSET so we only define it for v7ve+ platforms
Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181211151945.29137-7-aaron@os.amperecomputing.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rename arm_ccnt_enabled to pmu_counter_enabled, and add logic to only
return 'true' if the specified counter is enabled and neither prohibited
or filtered.
Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
Signed-off-by: Aaron Lindsay <aclindsa@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181211151945.29137-5-aaron@os.amperecomputing.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Because of the PMU's design, many register accesses have side effects
which are inter-related, meaning that the normal method of saving CP
registers can result in inconsistent state. These side-effects are
largely handled in pmu_op_start/finish functions which can be called
before and after the state is saved/restored. By doing this and adding
raw read/write functions for the affected registers, we avoid
migration-related inconsistencies.
Signed-off-by: Aaron Lindsay <aclindsa@gmail.com>
Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20181211151945.29137-4-aaron@os.amperecomputing.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
pmccntr_read and pmccntr_write contained duplicate code that was already
being handled by pmccntr_sync. Consolidate the duplicated code into two
functions: pmccntr_op_start and pmccntr_op_finish. Add a companion to
c15_ccnt in CPUARMState so that we can simultaneously save both the
architectural register value and the last underlying cycle count - this
ensures time isn't lost and will also allow us to access the 'old'
architectural register value in order to detect overflows in later
patches.
Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
Signed-off-by: Aaron Lindsay <aclindsa@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20181211151945.29137-3-aaron@os.amperecomputing.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190108223129.5570-29-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The arm_regime_tbi{0,1} functions are replacable with the new function
by giving the lowest and highest address.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190108223129.5570-24-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use TBID in aa64_va_parameters depending on the data parameter.
This automatically updates all existing users of the function.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190108223129.5570-23-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We will want to check TBI for I and D simultaneously.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190108223129.5570-22-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We need to reuse this from helper-a64.c. Provide a stub
definition for CONFIG_USER_ONLY. This matches the stub
definitions that we removed for arm_regime_tbi{0,1} before.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190108223129.5570-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We will shortly want to talk about TBI as it relates to data.
Passing around a pair of variables is less convenient than a
single variable.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190108223129.5570-20-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Split out functions to extract the virtual address parameters.
Let the functions choose T0 or T1 address space half, if present.
Extract (most of) the control bits that vary between EL or Tx.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190108223129.5570-19-richard.henderson@linaro.org
[PMM: fixed minor checkpatch comment nits]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While we could expose stage_1_mmu_idx, the combination is
probably going to be more useful.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190108223129.5570-18-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The pattern
ARMMMUIdx mmu_idx = core_to_arm_mmu_idx(env, cpu_mmu_index(env, false));
is computing the full ARMMMUIdx, stripping off the ARM bits,
and then putting them back.
Avoid the extra two steps with the appropriate helper function.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190108223129.5570-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This function is, or will shortly become, too big to inline.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190108223129.5570-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There are 5 bits of state that could be added, but to save
space within tbflags, add only a single enable bit.
Helpers will determine the rest of the state at runtime.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190108223129.5570-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In U-boot, we switch from S-SVC -> Mon -> Hyp mode when we want to
enter Hyp mode. The change into Hyp mode is done by doing an
exception return from Mon. This doesn't work with current QEMU.
The problem is that in bad_mode_switch() we refuse to allow
the change of mode.
Note that bad_mode_switch() is used to do validation for two situations:
(1) changes to mode by instructions writing to CPSR.M
(ie not exception take/return) -- this corresponds to the
Armv8 Arm ARM pseudocode Arch32.WriteModeByInstr
(2) changes to mode by exception return
Attempting to enter or leave Hyp mode via case (1) is forbidden in
v8 and UNPREDICTABLE in v7, and QEMU is correct to disallow it
there. However, we're already doing that check at the top of the
bad_mode_switch() function, so if that passes then we should allow
the case (2) exception return mode changes to switch into Hyp mode.
We want to test whether we're trying to return to the nonexistent
"secure Hyp" mode, so we need to look at arm_is_secure_below_el3()
rather than arm_is_secure(), since the latter is always true if
we're in Mon (EL3).
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190109152430.32359-1-agraf@suse.de
[PMM: rewrote commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use "register" TBFLAG_ANY to indicate shared state between
A32 and A64, and "registers" TBFLAG_A32 & TBFLAG_A64 for
fields that are specific to the given cpu state.
Move ARM_TBFLAG_BE_DATA to shared state, instead of its current
placement within "Bit usage when in AArch32 state".
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181218164348.7127-1-richard.henderson@linaro.org
[PMM: removed the renaming of BE_DATA flag to BE]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Provide a trivial implementation with zero limited ordering regions,
which causes the LDLAR and STLLR instructions to devolve into the
LDAR and STLR instructions from the base ARMv8.0 instruction set.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181210150501.7990-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since arm_hcr_el2_eff includes a check against
arm_is_secure_below_el3, we can often remove a
nearby check against secure state.
In some cases, sort the call to arm_hcr_el2_eff
to the end of a short-circuit logical sequence.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181210150501.7990-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Replace arm_hcr_el2_{fmo,imo,amo} with a more general routine
that also takes SCR_EL3.NS (aka arm_is_secure_below_el3) into
account, as documented for the plethora of bits in HCR_EL2.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181210150501.7990-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
