Move declarations related to page protection under user
emulation from "exec/cpu-all.h" to "user/page-protection.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241212185341.2857-13-philmd@linaro.org>
Move declarations related to page protection under user
emulation from "exec/cpu-all.h" to "user/page-protection.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241212185341.2857-12-philmd@linaro.org>
"exec/translate-all.h" is only useful to TCG accelerator,
so move it to accel/tcg/, after renaming it 'tb-internal.h'.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241212185341.2857-9-philmd@linaro.org>
Match with the page_protect() prototype, use a tb_page_addr_t
argument instead of target_ulong.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241212185341.2857-6-philmd@linaro.org>
Move mmap_lock(), mmap_unlock() declarations and the
WITH_MMAP_LOCK_GUARD() definition to 'exec/page-protection.h'.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241212185341.2857-5-philmd@linaro.org>
The next commit will remove "qemu/clang-tsa.h" of "exec/exec-all.h",
however the following files indirectly include it:
$ git grep -L qemu/clang-tsa.h $(git grep -wl TSA_NO_TSA)
block/create.c
include/block/block_int-common.h
tests/unit/test-bdrv-drain.c
tests/unit/test-block-iothread.c
util/qemu-thread-posix.c
Explicitly include it so we can process with the removal in the
next commit.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241212185341.2857-4-philmd@linaro.org>
'hwaddr' is defined in "exec/hwaddr.h", 'ram_addr_t' in
"exec/cpu-common.h". Include these headers in order to
avoid when refactoring unrelated headers:
In file included from ../../hw/s390x/s390-virtio-ccw.c:17:
include/sysemu/physmem-target.h:37:24: error: unknown type name 'hwaddr'
37 | (MemoryRegion *mr, hwaddr offset, hwaddr length, unsigned client);
| ^
In file included from ../../hw/s390x/s390-virtio-ccw.c:16:
include/exec/ram_addr.h:52:36: error: unknown type name 'ram_addr_t'
52 | RAMBlock *qemu_ram_alloc_from_file(ram_addr_t size, MemoryRegion *mr,
| ^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241218155202.71931-4-philmd@linaro.org>
Extract all declarations related to 'guest from/to host'
address translation to a new "user/guest-host.h" header.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241212185341.2857-2-philmd@linaro.org>
'vaddr' type is declared in "exec/vaddr.h".
"exec/translation-block.h" uses this type without including
the corresponding header. It works because this header is
indirectly included, but won't work when the other headers
are refactored:
include/exec/translation-block.h:56:5: error: unknown type name 'vaddr'
56 | vaddr pc;
| ^
Explitly include "exec/vaddr.h" to avoid such problem in a
few commits.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241114011310.3615-4-philmd@linaro.org>
"exec/cpu-defs.h" should be kept as minimal as possible;
besides these includes don't seem necessary. Remove them.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241114011310.3615-3-philmd@linaro.org>
TARGET_PAGE_BITS is defined in each target "cpu-param.h",
itself included by "exec/cpu-defs.h".
Include the latter in order to avoid when refactoring:
In file included from ../../system/watchpoint.c:23:
include/exec/cpu-all.h:356:19: error: use of undeclared identifier 'TARGET_PAGE_BITS'
356 | QEMU_BUILD_BUG_ON(TLB_FLAGS_MASK & TLB_SLOW_FLAGS_MASK);
| ^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241114011310.3615-2-philmd@linaro.org>
abi_ptr is expected to be used in user emulation.
tlb_vaddr_to_host() uses it, but can be used in
system emulation. Replace the type by 'vaddr' which
is equivalent on user emulation but also works on
system.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241114011310.3615-13-philmd@linaro.org>
"exec/confidential-guest-support.h" is specific to system
emulation, so move it under the system/ namespace.
Mechanical change doing:
$ sed -i \
-e 's,exec/confidential-guest-support.h,sysemu/confidential-guest-support.h,' \
$(git grep -l exec/confidential-guest-support.h)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20241218155913.72288-2-philmd@linaro.org>
Headers in include/sysemu/ are not only related to system
*emulation*, they are also used by virtualization. Rename
as system/ which is clearer.
Files renamed manually then mechanical change using sed tool.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Message-Id: <20241203172445.28576-1-philmd@linaro.org>
To move towards explicit creations of containers, starting that by
providing a helper for creating container objects.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241121192202.4155849-3-peterx@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Provide a macro for the container type across QEMU source tree, rather than
hard code it every time.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-ID: <20241121192202.4155849-2-peterx@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Currently -d guest_errors enables logging of different invalid actions
by the guest such as misusing hardware, accessing missing features or
invalid memory areas. The memory access logging can be quite verbose
which obscures the other messages enabled by this debug switch so
separate it by adding a new -d invalid_mem option to make it possible
to control it independently of other guest error logs.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <1bb0d0e91ba14aca13056df3b0a774f89cbf966c.1730549443.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Remove definition about LoongArchExtIOI and LOONGARCH_EXTIOI, and
replace them with LoongArchExtIOICommonState and macro
LOONGARCH_EXTIOI_COMMON separately. Also remove unnecessary header
files.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Add vmstate pre_save interface, which can be used extioi kvm driver
in future.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Set TYPE_LOONGARCH_EXTIOI inherit from TYPE_LOONGARCH_EXTIOI_COMMON
object, it shares vmsate and property of TYPE_LOONGARCH_EXTIOI_COMMON,
and has its own realize() function.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Rename structure LoongArchExtIOI with LoongArchExtIOICommonState,
since it is defined in file loongarch_extioi_common.h
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Move definiton of structure LoongArchExtIOI from header file loongarch_extioi.h
to file loongarch_extioi_common.h.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Add common header file include/hw/intc/loongarch_extioi_common.h, and
move some macro definition from include/hw/intc/loongarch_extioi.h to
the common header file.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Remove definition about LoongArchPCHPIC and LOONGARCH_PCH_PIC, and
replace them with LoongArchPICCommonState and LOONGARCH_PIC_COMMON
separately. Also remove unnecessary header files.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Add vmstate pre_save and post_load interfaces, which can be used
by pic kvm driver in future.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Set TYPE_LOONGARCH_PIC inherit from TYPE_LOONGARCH_PIC_COMMON object,
it shares vmsate and property of TYPE_LOONGARCH_PIC_COMMON, and has
its own realize() function.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Move structure LoongArchPCHPIC from header file loongarch_pch_pic.h
to file loongarch_pic_common.h, and rename structure name with
LoongArchPICCommonState.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Add common header file hw/intc/loongarch_pic_common.h, and move
some macro definition from hw/intc/loongarch_pch_pic.h to the common
header file.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Add new -shim command line option, wire up for the x86 loader.
When specified load shim into the new "etc/boot/shim" fw_cfg file.
Needs OVMF changes too to be actually useful.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-ID: <20240905141211.1253307-6-kraxel@redhat.com>
In some adhoc profiling booting Linux VMs, it's observed that ahci_irq_lower()
can be a hot path (10000+ triggers until login prompt appears). Even though the
parent device never changes, this method re-determines whether the parent device
is a PCI device or not using the rather expensive object_dynamic_cast()
function. Avoid this overhead by pushing the interrupt handling to the parent
device, essentially turning AHCIState into an "IP block".
Note that this change also frees AHCIState from the PCI dependency which wasn't
reflected in Kconfig.
Reported-by: Peter Xu <peterx@redhat.com>
Inspired-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241212110926.23548-2-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Now that all uses of fw_cfg_add_extra_pci_roots() have been
converted to the newer pci_bus_add_fw_cfg_extra_pci_roots(),
we can remove that bogus method. hw/nvram/fw_cfg must
stay generic. Device specific entries have to be implemented
using TYPE_FW_CFG_DATA_GENERATOR_INTERFACE.
This mostly reverts commit 0abd38885a
("fw_cfg: Refactor extra pci roots addition").
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20241206181352.6836-7-philmd@linaro.org>
pci_bus_add_fw_cfg_extra_pci_roots() calls the fw_cfg
API with PCI bus specific arguments.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20241206181352.6836-5-philmd@linaro.org>
Allow the FW_CFG_DATA_GENERATOR interface get_data() handler to
return NULL when there is nothing to generate. In that case
fw_cfg_add_file_from_generator() will not add any item and
return %true.
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20241213133352.10915-4-philmd@linaro.org>
Currently fw_cfg_add_file_from_generator() is restricted
to command line created objects which reside in the
'/objects' QOM container. In order to extend to other
types of containers, pass the QOM parent by argument.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20241206181352.6836-3-philmd@linaro.org>
fw_cfg_add_from_generator() is adding a 'file' entry,
so rename as fw_cfg_add_file_from_generator() for
clarity. Besides, we might introduce generators for
other entry types.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20241206181352.6836-2-philmd@linaro.org>
We were storing the pointers to buffers in a GList due to lack of
stateful crypto apis and instead doing the final hash computation at
the end after we had all the necessary buffers. Now that we have the
stateful qcrypto apis available, we can instead update the hashes
inline in the read_eif_* functions which makes the code much simpler.
Signed-off-by: Dorjoy Chowdhury <dorjoychy111@gmail.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
Message-ID: <20241109123039.24180-1-dorjoychy111@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This allows targets to declare that the helper requires a
float_status pointer and instead of a generic void pointer.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When allocating new temps during tcg_optmize, do not re-use
any EBB temps that were used within the TB. We do not have
any idea what span of the TB in which the temp was live.
Introduce tcg_temp_ebb_reset_freed and use before tcg_optimize,
as well as replacing the equivalent in plugin_gen_inject and
tcg_func_start.
Cc: qemu-stable@nongnu.org
Fixes: fb04ab7ddd ("tcg/optimize: Lower TCG_COND_TST{EQ,NE} if unsupported")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2711
Reported-by: wannacu <wannacu2049@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Currently we hardcode the default NaN value in parts64_default_nan()
using a compile-time ifdef ladder. This is awkward for two cases:
* for single-QEMU-binary we can't hard-code target-specifics like this
* for Arm FEAT_AFP the default NaN value depends on FPCR.AH
(specifically the sign bit is different)
Add a field to float_status to specify the default NaN value; fall
back to the old ifdef behaviour if these are not set.
The default NaN value is specified by setting a uint8_t to a
pattern corresponding to the sign and upper fraction parts of
the NaN; the lower bits of the fraction are set from bit 0 of
the pattern.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241202131347.498124-35-peter.maydell@linaro.org
The use_first_nan field in float_status was an xtensa-specific way to
select at runtime from two different NaN propagation rules. Now that
xtensa is using the target-agnostic NaN propagation rule selection
that we've just added, we can remove use_first_nan, because there is
no longer any code that reads it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241202131347.498124-27-peter.maydell@linaro.org
IEEE 758 does not define a fixed rule for which NaN to pick as the
result if both operands of a 3-operand fused multiply-add operation
are NaNs. As a result different architectures have ended up with
different rules for propagating NaNs.
QEMU currently hardcodes the NaN propagation logic into the binary
because pickNaNMulAdd() has an ifdef ladder for different targets.
We want to make the propagation rule instead be selectable at
runtime, because:
* this will let us have multiple targets in one QEMU binary
* the Arm FEAT_AFP architectural feature includes letting
the guest select a NaN propagation rule at runtime
In this commit we add an enum for the propagation rule, the field in
float_status, and the corresponding getters and setters. We change
pickNaNMulAdd to honour this, but because all targets still leave
this field at its default 0 value, the fallback logic will pick the
rule type with the old ifdef ladder.
It's valid not to set a propagation rule if default_nan_mode is
enabled, because in that case there's no need to pick a NaN; all the
callers of pickNaNMulAdd() catch this case and skip calling it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241202131347.498124-16-peter.maydell@linaro.org
IEEE 758 does not define a fixed rule for what NaN to return in
the case of a fused multiply-add of inf * 0 + NaN. Different
architectures thus do different things:
* some return the default NaN
* some return the input NaN
* Arm returns the default NaN if the input NaN is quiet,
and the input NaN if it is signalling
We want to make this logic be runtime selected rather than
hardcoded into the binary, because:
* this will let us have multiple targets in one QEMU binary
* the Arm FEAT_AFP architectural feature includes letting
the guest select a NaN propagation rule at runtime
In this commit we add an enum for the propagation rule, the field in
float_status, and the corresponding getters and setters. We change
pickNaNMulAdd to honour this, but because all targets still leave
this field at its default 0 value, the fallback logic will pick the
rule type with the old ifdef ladder.
Note that four architectures both use the muladd softfloat functions
and did not have a branch of the ifdef ladder to specify their
behaviour (and so were ending up with the "default" case, probably
wrongly): i386, HPPA, SH4 and Tricore. SH4 and Tricore both set
default_nan_mode, and so will never get into pickNaNMulAdd(). For
HPPA and i386 we retain the same behaviour as the old default-case,
which is to not ever return the default NaN. This might not be
correct but it is not a behaviour change.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241202131347.498124-4-peter.maydell@linaro.org
Prefer named constants over magic values for better readability.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20241102125724.532843-5-shentey@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
imx_fec models the same PHY as lan9118_phy. The code is almost the same with
imx_fec having more logging and tracing. Merge these improvements into
lan9118_phy and reuse in imx_fec to fix the code duplication.
Some migration state how resides in the new device model which breaks migration
compatibility for the following machines:
* imx25-pdk
* sabrelite
* mcimx7d-sabre
* mcimx6ul-evk
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20241102125724.532843-3-shentey@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A very similar implementation of the same device exists in imx_fec. Prepare for
a common implementation by extracting a device model into its own files.
Some migration state has been moved into the new device model which breaks
migration compatibility for the following machines:
* smdkc210
* realview-*
* vexpress-*
* kzm
* mps2-*
While breaking migration ABI, fix the size of the MII registers to be 16 bit,
as defined by IEEE 802.3u.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20241102125724.532843-2-shentey@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
