* target/i386/emulate: more lflags cleanups
* meson: remove need for explicit listing of dependencies in hw_common_arch and
target_common_arch
* rust: small fixes
* hpet: Reorganize register decoding to be more similar to Rust code
* target/i386: fixes for AMD models
* target/i386: new EPYC-Turin CPU model
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmg4BxwUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroP67gf+PEP4EDQP0AJUfxXYVsczGf5snGjz
ro8jYmKG+huBZcrS6uPK5zHYxtOI9bHr4ipTHJyHd61lyzN6Ys9amPbs/CRE2Q4x
Ky4AojPhCuaL2wHcYNcu41L+hweVQ3myj97vP3hWvkatulXYeMqW3/4JZgr4WZ69
A9LGLtLabobTz5yLc8x6oHLn/BZ2y7gjd2LzTz8bqxx7C/kamjoDrF2ZHbX9DLQW
BKWQ3edSO6rorSNHWGZsy9BE20AEkW2LgJdlV9eXglFEuEs6cdPKwGEZepade4bQ
Rdt2gHTlQdUDTFmAbz8pttPxFGMC9Zpmb3nnicKJpKQAmkT/x4k9ncjyAQ==
=XmkU
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* target/i386/kvm: Intel TDX support
* target/i386/emulate: more lflags cleanups
* meson: remove need for explicit listing of dependencies in hw_common_arch and
target_common_arch
* rust: small fixes
* hpet: Reorganize register decoding to be more similar to Rust code
* target/i386: fixes for AMD models
* target/i386: new EPYC-Turin CPU model
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCgAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmg4BxwUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroP67gf+PEP4EDQP0AJUfxXYVsczGf5snGjz
# ro8jYmKG+huBZcrS6uPK5zHYxtOI9bHr4ipTHJyHd61lyzN6Ys9amPbs/CRE2Q4x
# Ky4AojPhCuaL2wHcYNcu41L+hweVQ3myj97vP3hWvkatulXYeMqW3/4JZgr4WZ69
# A9LGLtLabobTz5yLc8x6oHLn/BZ2y7gjd2LzTz8bqxx7C/kamjoDrF2ZHbX9DLQW
# BKWQ3edSO6rorSNHWGZsy9BE20AEkW2LgJdlV9eXglFEuEs6cdPKwGEZepade4bQ
# Rdt2gHTlQdUDTFmAbz8pttPxFGMC9Zpmb3nnicKJpKQAmkT/x4k9ncjyAQ==
# =XmkU
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 29 May 2025 03:05:00 EDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (77 commits)
target/i386/tcg/helper-tcg: fix file references in comments
target/i386: Add support for EPYC-Turin model
target/i386: Update EPYC-Genoa for Cache property, perfmon-v2, RAS and SVM feature bits
target/i386: Add couple of feature bits in CPUID_Fn80000021_EAX
target/i386: Update EPYC-Milan CPU model for Cache property, RAS, SVM feature bits
target/i386: Update EPYC-Rome CPU model for Cache property, RAS, SVM feature bits
target/i386: Update EPYC CPU model for Cache property, RAS, SVM feature bits
rust: make declaration of dependent crates more consistent
docs: Add TDX documentation
i386/tdx: Validate phys_bits against host value
i386/tdx: Make invtsc default on
i386/tdx: Don't treat SYSCALL as unavailable
i386/tdx: Fetch and validate CPUID of TD guest
target/i386: Print CPUID subleaf info for unsupported feature
i386: Remove unused parameter "uint32_t bit" in feature_word_description()
i386/cgs: Introduce x86_confidential_guest_check_features()
i386/tdx: Define supported KVM features for TDX
i386/tdx: Add XFD to supported bit of TDX
i386/tdx: Add supported CPUID bits relates to XFAM
i386/tdx: Add supported CPUID bits related to TD Attributes
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Three sha384 hash values, mrconfigid, mrowner and mrownerconfig, of a TD
can be provided for TDX attestation. Detailed meaning of them can be
found: https://lore.kernel.org/qemu-devel/31d6dbc1-f453-4cef-ab08-4813f4e0ff92@intel.com/
Allow user to specify those values via property mrconfigid, mrowner and
mrownerconfig. They are all in base64 format.
example
-object tdx-guest, \
mrconfigid=ASNFZ4mrze8BI0VniavN7wEjRWeJq83vASNFZ4mrze8BI0VniavN7wEjRWeJq83v,\
mrowner=ASNFZ4mrze8BI0VniavN7wEjRWeJq83vASNFZ4mrze8BI0VniavN7wEjRWeJq83v,\
mrownerconfig=ASNFZ4mrze8BI0VniavN7wEjRWeJq83vASNFZ4mrze8BI0VniavN7wEjRWeJq83v
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Link: https://lore.kernel.org/r/20250508150002.689633-14-xiaoyao.li@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Bit 28 of TD attribute, named SEPT_VE_DISABLE. When set to 1, it disables
EPT violation conversion to #VE on guest TD access of PENDING pages.
Some guest OS (e.g., Linux TD guest) may require this bit as 1.
Otherwise refuse to boot.
Add sept-ve-disable property for tdx-guest object, for user to configure
this bit.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Link: https://lore.kernel.org/r/20250508150002.689633-10-xiaoyao.li@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce tdx-guest object which inherits X86_CONFIDENTIAL_GUEST,
and will be used to create TDX VMs (TDs) by
qemu -machine ...,confidential-guest-support=tdx0 \
-object tdx-guest,id=tdx0
It has one QAPI member 'attributes' defined, which allows user to set
TD's attributes directly.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Link: https://lore.kernel.org/r/20250508150002.689633-3-xiaoyao.li@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As requested by Markus:
> We prefer imperative mood "Return" over "Returns".
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20250522190542.588267-14-pierrick.bouvier@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Change several more]
Monolithic files (qapi_nonmodule_outputs) can now be compiled just
once, so we can remove qapi_util_outputs logic.
This removes the need for any specific_ss file.
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20250522190542.588267-13-pierrick.bouvier@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
There is no more QAPI files that need to be compiled per target, so we
can remove this. qapi_specific_outputs is now empty, so we can remove
the associated logic in meson.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20250522190542.588267-12-pierrick.bouvier@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
This removes the TARGET_S390X and CONFIG_KVM conditions from the
CPU commands that are conceptually specific to s390x. Top level
stubs are provided to cope with non-s390x targets, or builds
without KVM.
The removal of CONFIG_KVM is justified by the fact there is no
conceptual difference between running 'qemu-system-s390x -accel tcg'
on a build with and without KVM built-in, so apps only using TCG
can't rely on the CONFIG_KVM in the schema.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20250522190542.588267-11-pierrick.bouvier@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
This removes the TARGET_* conditions from all the CPU commands
that are conceptually target independent. Top level stubs are
provided to cope with targets which do not currently implement
all of the commands. Adjust the doc comments accordingly.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20250522190542.588267-10-pierrick.bouvier@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
We'd like to have some unified QAPI schema. Having a structure field
conditional to a target being built in is not very practical.
While @deprecated-props is only used by s390x target, it is generic
enough and could be used by other targets (assuming we expand
CpuModelExpansionType enum values).
Let's always include this field, regardless of the target, but make it
optional. This is not a compatibility break only because the field
remains present always on S390x.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20250522190542.588267-9-pierrick.bouvier@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
This file is now empty and can thus be removed.
Observe the pre-existing bug with s390-skeys.c and target/i386/monitor.c
both including qapi-commands-misc-target.h despite not requiring it.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20250522190542.588267-8-pierrick.bouvier@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
This removes the TARGET_I386 condition from the Xen event channel
commands, moving them to the recently introduced misc-i386.json
QAPI file, given they are inherantly i386 specific commands.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20250522190542.588267-7-pierrick.bouvier@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
This removes the TARGET_I386 condition from the SGX confidential
virtualization commands, moving them to the recently introduced
misc-i386.json QAPI file, given they are inherantly i386 specific
commands.
Observe a pre-existing bug that the "SGXEPCSection" struct lacked
a TARGET_I386 condition, despite its only usage being behind a
TARGET_I386 condition.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20250522190542.588267-6-pierrick.bouvier@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
This removes the TARGET_ARM condition from the query-gic-capability
command. This requires providing a QMP command stub for non-ARM targets.
This in turn requires moving the command out of misc-target.json, since
that will trigger symbol poisoning errors when built from target
independent code.
Following the earlier precedent, this creates a misc-arm.json file to
hold this ARM specific command.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20250522190542.588267-5-pierrick.bouvier@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
This removes the TARGET_I386 condition from the SEV confidential
virtualization commands, moving them to the recently introduced
misc-i386.json QAPI file, given they are inherantly i386 specific
commands.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20250522190542.588267-4-pierrick.bouvier@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
This gives some more context about the behaviour of the commands in
unsupported guest configuration or platform scenarios.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20250522190542.588267-3-pierrick.bouvier@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Tweak query-sev doc, turn error descriptions into Errors sections,
delate a stray #, normalize whitespace, wrap lines]
This removes the TARGET_I386 condition from the rtc-reset-reinjection
command. This requires providing a QMP command stub for non-i386 target.
This in turn requires moving the command out of misc-target.json, since
that will trigger symbol poisoning errors when built from target
independent code.
Rather than putting the command into misc.json, it is proposed to create
misc-$TARGET.json files to hold commands whose impl is conceptually
only applicable to a single target. This gives an obvious docs hint to
consumers that the command is only useful in relation a specific target,
while misc.json is for commands applicable to 2 or more targets.
The current impl of qmp_rtc_reset_reinject() is a no-op if the i386
RTC is disabled in Kconfig, or if the running machine type lack any
RTC device.
The stub impl for non-i386 targets retains this no-op behaviour.
However, it is now reporting an Error mentioning this command is not
available for current target.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20250522190542.588267-2-pierrick.bouvier@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Argument @detach has always been ignored. Start the clock to get rid
of it.
Cc: Peter Xu <peterx@redhat.com>
Cc: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20250521063711.29840-3-armbru@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Quoting Volker Rümelin: "try-poll=on tells the ALSA backend to try to
use an event loop instead of the audio timer. This works most of the
time. But the poll event handler in the ALSA backend has a bug. For
example, if the guest can't provide enough audio frames in time, the
ALSA buffer is only partly full and the event handler will be called
again and again on every iteration of the main loop. This increases
the processor load and the guest has less processor time to provide
new audio frames in time. I have two examples where a guest can't
recover from this situation and the guest seems to hang."
One reproducer I've found is booting MorphOS demo iso on
qemu-system-ppc -machine pegasos2 -audio alsa which should play a
startup sound but instead it freezes. Even when it does not hang it
plays choppy sound. Volker suggested using command line to set
try-poll=off saying: "The try-poll=off arguments are typically
necessary, because the alsa backend has a design issue with
try-poll=on. If the guest can't provide enough audio frames, it's
really unhelpful to ask for new audio frames on every main loop
iteration until the guest can provide enough audio frames. Timer based
playback doesn't have that problem."
But users cannot easily find this option and having a non-working
default is really unhelpful so to make life easier just set it to
false by default which works until the issue with the alsa backend can
be fixed.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[ Marc-André - Updated QAPI and CLI doc ]
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20250316002046.D066A4E6004@zero.eik.bme.hu>
With the default TCP stack configuration, it could be even 2 hours
before the connection times out due to the other side not being
reachable. However, in some cases, the application needs to be aware of
a connection issue much sooner.
This is the case, for example, for postcopy live migration. If there is
no traffic from the migration destination guest (server-side) to the
migration source guest (client-side), the destination keeps waiting for
pages indefinitely and does not switch to the postcopy-paused state.
This can happen, for example, if the destination QEMU instance is
started with the '-S' command line option and the machine is not started
yet, or if the machine is idle and produces no new page faults for
not-yet-migrated pages.
This patch introduces new inet socket parameters that control count,
idle period, and interval of TCP keep-alive packets before the
connection is considered broken. These parameters are available on
systems where the respective TCP socket options are defined, that
includes Linux, Windows, macOS, but not OpenBSD. Additionally, macOS
defines TCP_KEEPIDLE as TCP_KEEPALIVE instead, so the patch supplies its
own definition.
The default value for all is 0, which means the system configuration is
used.
Signed-off-by: Juraj Marcin <jmarcin@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Commit aec21d3175 (qapi: Add InetSocketAddress member keep-alive)
introduces the keep-alive flag, which enables the SO_KEEPALIVE socket
option, but only on client-side sockets. However, this option is also
useful for server-side sockets, so they can check if a client is still
reachable or drop the connection otherwise.
This patch enables the SO_KEEPALIVE socket option on passive server-side
sockets if the keep-alive flag is enabled. This socket option is then
inherited by active server-side sockets communicating with connected
clients.
Signed-off-by: Juraj Marcin <jmarcin@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There're 2 QMP commands: query-sgx and query-sgx-capabilities, but
their outputs are very similar and the documentation lacks clear
differentiation.
From the codes, query-sgx is used to gather guest's SGX capabilities
(including SGX related CPUIDs and EPC sections' size, in SGXInfo), and
if guest doesn't have SGX, then QEMU will report the error message.
On the other hand, query-sgx-capabilities is used to gather host's SGX
capabilities (descripted by SGXInfo as well). And if host doesn't
support SGX, then QEMU will also report the error message.
Considering that SGXInfo is already documented and both these 2 commands
have enough error messages (for the exception case in their codes).
Therefore the QAPI documentation for these two commands only needs to
emphasize that one of them applies to the guest and the other to the
host.
Fix their documentation to reflect this difference.
Reported-by: Markus Armbruster <armbru@redhat.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Link: https://lore.kernel.org/r/20250513143131.2008078-3-zhao1.liu@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The "sections" field of SGXInfo is used to gather EPC section
information for both the guest and the host. Therefore, delete the "for
guest" limitation.
Additionally, avoid the abbreviation "info" and use "information"
instead. And for SGXEPCSection, delete the redundant word "info".
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Link: https://lore.kernel.org/r/20250513143131.2008078-2-zhao1.liu@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QAPI requires strict PascalCase naming style, i.e., only the first
letter of a single word is allowed to be uppercase, which could help
with readability.
Rename SGXInfo to SgxInfo.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Link: https://lore.kernel.org/r/20250516091130.2374221-3-zhao1.liu@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QAPI requires strict PascalCase naming style, i.e., only the first
letter of a single word is allowed to be uppercase, which could help
with readability.
Rename SGXEPCSection to SgxEpcSection.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Link: https://lore.kernel.org/r/20250516091130.2374221-2-zhao1.liu@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU has an optimization for a just-created drive-mirror destination
that is not possible for blockdev-mirror (which can't create the
destination) - any time we know the destination starts life as all
zeroes, we can skip a pre-zeroing pass on the destination. Recent
patches have added an improved heuristic for detecting if a file
contains all zeroes, and we plan to use that heuristic in upcoming
patches. But since a heuristic cannot quickly detect all scenarios,
and there may be cases where the caller is aware of information that
QEMU cannot learn quickly, it makes sense to have a way to tell QEMU
to assume facts about the destination that can make the mirror
operation faster. Given our existing example of "qemu-img convert
--target-is-zero", it is time to expose this override in QMP for
blockdev-mirror as well.
This patch results in some slight redundancy between the older
s->zero_target (set any time mode==FULL and the destination image was
not just created - ie. clear if drive-mirror is asking to skip the
pre-zero pass) and the newly-introduced s->target_is_zero (in addition
to the QMP override, it is set when drive-mirror creates the
destination image); this will be cleaned up in the next patch.
There is also a subtlety that we must consider. When drive-mirror is
passing target_is_zero on behalf of a just-created image, we know the
image is sparse (skipping the pre-zeroing keeps it that way), so it
doesn't matter whether the destination also has "discard":"unmap" and
"detect-zeroes":"unmap". But now that we are letting the user set the
knob for target-is-zero, if the user passes a pre-existing file that
is fully allocated, it is fine to leave the file fully allocated under
"detect-zeroes":"on", but if the file is open with
"detect-zeroes":"unmap", we should really be trying harder to punch
holes in the destination for every region of zeroes copied from the
source. The easiest way to do this is to still run the pre-zeroing
pass (turning the entire destination file sparse before populating
just the allocated portions of the source), even though that currently
results in double I/O to the portions of the file that are allocated.
A later patch will add further optimizations to reduce redundant
zeroing I/O during the mirror operation.
Since "target-is-zero":true is designed for optimizations, it is okay
to silently ignore the parameter rather than erroring if the user ever
sets the parameter in a scenario where the mirror job can't exploit it
(for example, when doing "sync":"top" instead of "sync":"full", we
can't pre-zero, so setting the parameter won't make a speed
difference).
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20250509204341.3553601-23-eblake@redhat.com>
Reviewed-by: Sunny Zhu <sunnyzhyy@qq.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
- deprecate some old block-job- APIs
- on-cbw-error option for backup
- more efficient zero handling in block commit
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEi5wmzbL9FHyIDoahVh8kwfGfefsFAmgiEpwACgkQVh8kwfGf
eftuPw//UWU7MN7Kd8Tc7x/5xJuVOiuOUp8iu78EBtvJy7+yy6lZxDmrVSpob3pI
fiIjZRd0LTO0/hu5nLeTqyGs8cthKNO+hHO1i8xIQuOVC3WqdbCYkiXYUjcHJCeT
ZD2xR2l3F/cjBHXnp7w8K2wuqd4OGjvUpw/JG3mvkDp6uAMJBp+qccAtiCXKLAGv
a4qvFt02TIi7IZYoEyRN+NGuwYvmwrD0TPSbWDzroYsmdZyz93dZniiWkV8elheW
iCDzv4AG1yquAbw6INW3BRWblBYWCLSvrtMVN9XAYf8R+b75bDghUzdHPyFiitsL
aenMMPaNeH1z0jB7oSLrRWx12eCfuRy5UTeil+RQsH9HsGCu7C5yBWkuAyZwlVk1
Qdu3SQ6HGk6BYET0TSRgk/fivmVq14vYxCFWbwclBEuN1HyNxwDJHZE3YxsqGZnM
KM1rByFViOCA+bjw00dFrn18wO8XRWHmRjed8KMAOZvc3jvJUdlr5OR3zfw3RR8l
bpBETylF7d7IpPs6LnxX08SAMBGLYzQe4rvguxjQ/2YB8C9KBkTodygKUYXR3Afw
Wp+vOVmG03XzOdaffuB9VAfyZrE7QmhbdWZTQVBcoqu/oHUbukHboB5p68L3oHXy
0AxHjMyaW5d01JELU0Mlj1+R8e+nK2kTq17v+ghmdX/LyySUyzc=
=tjus
-----END PGP SIGNATURE-----
Merge tag 'pull-block-jobs-2025-04-29-v3' of https://gitlab.com/vsementsov/qemu into staging
block-job patches
- deprecate some old block-job- APIs
- on-cbw-error option for backup
- more efficient zero handling in block commit
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEEi5wmzbL9FHyIDoahVh8kwfGfefsFAmgiEpwACgkQVh8kwfGf
# eftuPw//UWU7MN7Kd8Tc7x/5xJuVOiuOUp8iu78EBtvJy7+yy6lZxDmrVSpob3pI
# fiIjZRd0LTO0/hu5nLeTqyGs8cthKNO+hHO1i8xIQuOVC3WqdbCYkiXYUjcHJCeT
# ZD2xR2l3F/cjBHXnp7w8K2wuqd4OGjvUpw/JG3mvkDp6uAMJBp+qccAtiCXKLAGv
# a4qvFt02TIi7IZYoEyRN+NGuwYvmwrD0TPSbWDzroYsmdZyz93dZniiWkV8elheW
# iCDzv4AG1yquAbw6INW3BRWblBYWCLSvrtMVN9XAYf8R+b75bDghUzdHPyFiitsL
# aenMMPaNeH1z0jB7oSLrRWx12eCfuRy5UTeil+RQsH9HsGCu7C5yBWkuAyZwlVk1
# Qdu3SQ6HGk6BYET0TSRgk/fivmVq14vYxCFWbwclBEuN1HyNxwDJHZE3YxsqGZnM
# KM1rByFViOCA+bjw00dFrn18wO8XRWHmRjed8KMAOZvc3jvJUdlr5OR3zfw3RR8l
# bpBETylF7d7IpPs6LnxX08SAMBGLYzQe4rvguxjQ/2YB8C9KBkTodygKUYXR3Afw
# Wp+vOVmG03XzOdaffuB9VAfyZrE7QmhbdWZTQVBcoqu/oHUbukHboB5p68L3oHXy
# 0AxHjMyaW5d01JELU0Mlj1+R8e+nK2kTq17v+ghmdX/LyySUyzc=
# =tjus
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 12 May 2025 11:24:12 EDT
# gpg: using RSA key 8B9C26CDB2FD147C880E86A1561F24C1F19F79FB
# gpg: Good signature from "Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>" [unknown]
# gpg: aka "Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8B9C 26CD B2FD 147C 880E 86A1 561F 24C1 F19F 79FB
* tag 'pull-block-jobs-2025-04-29-v3' of https://gitlab.com/vsementsov/qemu:
blockdev-backup: Add error handling option for copy-before-write jobs
qapi/block-core: deprecate some block-job- APIs
qapi: synchronize jobs and block-jobs documentation
block: add test non-active commit with zeroed data
block: allow commit to unmap zero blocks
block: refactor error handling of commit_iteration
block: move commit_run loop to separate function
block: get type of block allocation in commit_run
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch extends the blockdev-backup QMP command to allow users to specify
how to behave when IO errors occur during copy-before-write operations.
Previously, the behavior was fixed and could not be controlled by the user.
The new 'on-cbw-error' option can be set to one of two values:
- 'break-guest-write': Forwards the IO error to the guest and triggers
the on-source-error policy. This preserves snapshot integrity at the
expense of guest IO operations.
- 'break-snapshot': Allows the guest OS to continue running normally,
but invalidates the snapshot and aborts related jobs. This prioritizes
guest operation over backup consistency.
This enhancement provides more flexibility for backup operations in different
environments where requirements for guest availability versus backup
consistency may vary.
The default behavior remains unchanged to maintain backward compatibility.
Signed-off-by: Raman Dzehtsiar <Raman.Dzehtsiar@gmail.com>
Message-ID: <20250414090025.828660-1-Raman.Dzehtsiar@gmail.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
[vsementsov: fix long lines]
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Tested-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
For change, pause, resume, complete, dismiss and finalize actions
corresponding job- and block-job commands are almost equal. The
difference is in find_block_job_locked() vs find_job_locked()
functions. What's different?
1. find_block_job_locked() checks whether the found job is a block-job.
This is OK when moving to more generic API, no needs to document this
change.
2. find_block_job_locked() reports DeviceNotActive on failure, when
find_job_locked() reports GenericError. So, let's document this
difference in deprecated.txt. Still, for dismiss and finalize errors
are not documented at all, so be silent in deprecated.txt as well.
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <20250409084232.28201-3-vsementsov@yandex-team.ru>
Actualize documentation and synchronize it for commands which actually
call the same functions internally.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <20250409084232.28201-2-vsementsov@yandex-team.ru>
The QAPI-generated 'TargetInfo' structure name is only used
in a single file. We want to heavily use another structure
similarly named. Rename the QAPI one, since structure names
are not part of the public API.
Suggested-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20250422145502.70770-2-philmd@linaro.org>
Reduce misc-target.json by one target specific command.
Error message is returned for machines not implementing
TYPE_DUMP_SKEYS_INTERFACE:
$ qemu-system-aarch64 -M virt -S -qmp stdio
{"QMP": {"version": {"qemu": {"micro": 50, "major": 9}}, "capabilities": ["oob"]}}
{ "execute": "qmp_capabilities" }
{"return": {}}
{ "execute": "dump-skeys", "arguments": { "filename": "/tmp/foo" } }
{"error": {"class": "GenericError", "desc": "Storage keys information not available for this architecture"}}
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20250310151414.11550-5-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Cut the crap that stopped making sense years ago. Adjust the
remainder.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20250404121413.1743790-10-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The introduction explains example notation. The series merged in
merge commit e6485190f7 (in 9.1) improved how they look in generated
docs, but neglected to update the introduction accordingly. Do that
now.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20250404121413.1743790-9-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The command can return any number of RockerOfDpaFlow objects. The
example shows it returning exactly two, with the second object's
members elided. Tweak it so it elides elements after the first
instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20250404121413.1743790-3-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Commit message typo fixed]
This also creates the qapi-qmp-index.html index and cross-reference
target.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250313044312.189276-10-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The description of feature @unstable is three paragraphs. The second
and third became part of the description by accident in commit
9fb49daabf (qapi: Mark unstable QMP parts with feature 'unstable').
The second paragraph describes a defect in terms of the
implementation. Fine, but doesn't belong into user-facing
documentation. Turn it into a TODO section.
Rewrite everything else for clarity and completeness.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20250311131715.1296101-1-armbru@redhat.com>
Acked-by: Alberto Garcia <berto@igalia.com>
We are not enabling the transmogrifier for QSD or QGA yet because we
don't (yet) have a way to create separate indices, and all of the
definitions will bleed together, which isn't so nice.
For now, QMP is better than nothing at all!
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250311034303.75779-62-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
- Several iotest fixes
- Refactor QMP for NbdServerOptions for less repetition
- Avoid a hang in 'qemu-nbd --fork' when simple trace backend is enabled
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEccLMIrHEYCkn0vOqp6FrSiUnQ2oFAmfI2I0ACgkQp6FrSiUn
Q2pMWQf/ZNnuLC5O5W4Yiyki7mYjN3Izve5+xgM/gNv9uTrHmYXogYzswpYz1USo
aU1i/EFLJ5K7ImefQYBvySox+opwFs63xPscI/liwrKu54csp1rYGNg3hjKYaZCc
ukR5tB4bRQ2/JXNo0JueiocMZLyC5fZRUt9Z423D3ReHCtEJof0v1rTL2r7mzGJg
EdaRSGr0s592rFjWLwwvWWun5f0mEAFXM2YvZRRLE7M+x2XJeAR4F400GfvSMDNo
chGX41QKhmCYTMI5Shc/mX+5hMllEt/TyYBJUUk0cslJriVnNDV5VTFf184BmH5s
tqiUtzJubxt8/Wtpg6OV9RPAzVmr1g==
=NO+l
-----END PGP SIGNATURE-----
Merge tag 'pull-nbd-2025-03-05' of https://repo.or.cz/qemu/ericb into staging
NBD patches for 2025-03-05
- Several iotest fixes
- Refactor QMP for NbdServerOptions for less repetition
- Avoid a hang in 'qemu-nbd --fork' when simple trace backend is enabled
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEccLMIrHEYCkn0vOqp6FrSiUnQ2oFAmfI2I0ACgkQp6FrSiUn
# Q2pMWQf/ZNnuLC5O5W4Yiyki7mYjN3Izve5+xgM/gNv9uTrHmYXogYzswpYz1USo
# aU1i/EFLJ5K7ImefQYBvySox+opwFs63xPscI/liwrKu54csp1rYGNg3hjKYaZCc
# ukR5tB4bRQ2/JXNo0JueiocMZLyC5fZRUt9Z423D3ReHCtEJof0v1rTL2r7mzGJg
# EdaRSGr0s592rFjWLwwvWWun5f0mEAFXM2YvZRRLE7M+x2XJeAR4F400GfvSMDNo
# chGX41QKhmCYTMI5Shc/mX+5hMllEt/TyYBJUUk0cslJriVnNDV5VTFf184BmH5s
# tqiUtzJubxt8/Wtpg6OV9RPAzVmr1g==
# =NO+l
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 06 Mar 2025 07:04:45 HKT
# gpg: using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg: aka "[jpeg image of size 6874]" [full]
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* tag 'pull-nbd-2025-03-05' of https://repo.or.cz/qemu/ericb:
nbd: Defer trace init until after daemonization
qapi: merge common parts of NbdServerOptions and nbd-server-start data
iotests: Stop NBD server in test 162 before starting the next one
iotest: Unbreak 302 with python 3.13
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Instead of comment
"Keep this type consistent with the nbd-server-start arguments", we
can simply merge these things.
Note that each field of new base already has "since" tag, equal in both
original copies. So "since" information is saved.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <20250219191914.440451-1-vsementsov@yandex-team.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Apple has its own virtio-blk PCI device ID where it deviates from the
official virtio-pci spec slightly: It puts a new "apple type"
field at a static offset in config space and introduces a new barrier
command.
This patch first creates a mechanism for virtio-blk downstream classes to
handle unknown commands. It then creates such a downstream class and a new
vmapple-virtio-blk-pci class which support the additional apple type config
identifier as well as the barrier command.
The 'aux' or 'root' device type are selected using the 'variant' property.
Signed-off-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20241223221645.29911-13-phil@philjordan.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Define qapi schema for the uefi variable store state.
Use it and the generated visitor helper functions to store persistent
(EFI_VARIABLE_NON_VOLATILE) variables in JSON format on disk.
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-ID: <20250225163031.1409078-15-kraxel@redhat.com>
[ incremental fix squashed in ]
Message-ID: <pji24p6oag7cn2rovus7rquo7q2c6tokuquobfro2sqorky7vu@tk7cxud6jw7f>
Refine documentation for the hub device, specify the maximum.
Signed-off-by: Roman Penyaev <r.peniaev@gmail.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: qemu-devel@nongnu.org
Message-ID: <20250219090607.559887-1-r.peniaev@gmail.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
