Add two helpers: one to lookup for a given IOTLB entry and
one to insert a new entry. We also move the tracing there.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200728150815.11446-3-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Here's my first pull request for qemu-5.2, which has quite a few
accumulated things. Highlights are:
* Preliminary support for POWER10 (Power ISA 3.1) instruction emulation
* Add documentation on the (very confusing) pseries NUMA configuration
* Fix some bugs handling edge cases with XICS, XIVE and kernel_irqchip
* Fix icount for a number of POWER registers
* Many cleanups to error handling in XIVE code
* Validate size of -prom-env data
-----BEGIN PGP SIGNATURE-----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=L9Wi
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.2-20200818' into staging
ppc patch queue 2020-08-18
Here's my first pull request for qemu-5.2, which has quite a few
accumulated things. Highlights are:
* Preliminary support for POWER10 (Power ISA 3.1) instruction emulation
* Add documentation on the (very confusing) pseries NUMA configuration
* Fix some bugs handling edge cases with XICS, XIVE and kernel_irqchip
* Fix icount for a number of POWER registers
* Many cleanups to error handling in XIVE code
* Validate size of -prom-env data
# gpg: Signature made Tue 18 Aug 2020 05:18:36 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-5.2-20200818: (40 commits)
spapr/xive: Use xive_source_esb_len()
nvram: Exit QEMU if NVRAM cannot contain all -prom-env data
spapr/xive: Simplify error handling of kvmppc_xive_cpu_synchronize_state()
ppc/xive: Simplify error handling in xive_tctx_realize()
spapr/xive: Simplify error handling in kvmppc_xive_connect()
ppc/xive: Fix error handling in vmstate_xive_tctx_*() callbacks
spapr/xive: Fix error handling in kvmppc_xive_post_load()
spapr/kvm: Fix error handling in kvmppc_xive_pre_save()
spapr/xive: Rework error handling of kvmppc_xive_set_source_config()
spapr/xive: Rework error handling in kvmppc_xive_get_queues()
spapr/xive: Rework error handling of kvmppc_xive_[gs]et_queue_config()
spapr/xive: Rework error handling of kvmppc_xive_cpu_[gs]et_state()
spapr/xive: Rework error handling of kvmppc_xive_mmap()
spapr/xive: Rework error handling of kvmppc_xive_source_reset()
spapr/xive: Rework error handling of kvmppc_xive_cpu_connect()
spapr: Simplify error handling in spapr_phb_realize()
spapr/xive: Convert KVM device fd checks to assert()
ppc/xive: Introduce dedicated kvm_irqchip_in_kernel() wrappers
ppc/xive: Rework setup of XiveSource::esb_mmio
target/ppc: Integrate icount to purr, vtb, and tbu40
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- Convert legacy SD host controller to the SDBus API
- Move legacy API to a separate "sdcard_legacy.h" header
- Introduce methods to access multiple bytes on SDBus data lines
- Fix 'switch function' group location
- Fix SDSC maximum card size (2GB)
CI jobs result:
180605963
-----BEGIN PGP SIGNATURE-----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=Pefc
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/philmd-gitlab/tags/sd-next-20200821' into staging
SD/MMC patches
- Convert legacy SD host controller to the SDBus API
- Move legacy API to a separate "sdcard_legacy.h" header
- Introduce methods to access multiple bytes on SDBus data lines
- Fix 'switch function' group location
- Fix SDSC maximum card size (2GB)
CI jobs result:
180605963
# gpg: Signature made Fri 21 Aug 2020 18:27:50 BST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* remotes/philmd-gitlab/tags/sd-next-20200821: (23 commits)
hw/sd: Correct the maximum size of a Standard Capacity SD Memory Card
hw/sd: Fix incorrect populated function switch status data structure
hw/sd: Use sdbus_read_data() instead of sdbus_read_byte() when possible
hw/sd: Add sdbus_read_data() to read multiples bytes on the data line
hw/sd: Use sdbus_write_data() instead of sdbus_write_byte when possible
hw/sd: Add sdbus_write_data() to write multiples bytes on the data line
hw/sd: Rename sdbus_read_data() as sdbus_read_byte()
hw/sd: Rename sdbus_write_data() as sdbus_write_byte()
hw/sd: Rename read/write_data() as read/write_byte()
hw/sd: Move sdcard legacy API to 'hw/sd/sdcard_legacy.h'
hw/sd/sdcard: Make sd_data_ready() static
hw/sd/pl181: Replace disabled fprintf()s by trace events
hw/sd/pl181: Do not create SD card within the SD host controller
hw/sd/pl181: Expose a SDBus and connect the SDCard to it
hw/sd/pl181: Use named GPIOs
hw/sd/pl181: Add TODO to use Fifo32 API
hw/sd/pl181: Rename pl181_send_command() as pl181_do_command()
hw/sd/pl181: Replace fprintf(stderr, "*\n") with error_report()
hw/sd/milkymist: Do not create SD card within the SD host controller
hw/sd/milkymist: Create the SDBus at init()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Once an interrupt has been claimed, but before it has been compelted we
shouldn't receive any more pending interrupts. This patche keeps track
of this to ensure that we don't see any more interrupts until it is
completed.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <394c3f070615ff2b4fab61a1cf9cb48c122913b7.1595655188.git.alistair.francis@wdc.com>
It is enough to simply map the SiFive FU540 L2 cache controller
into the MMIO space using create_unimplemented_device(), with an
FDT fragment generated, to make the latest upstream U-Boot happy.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <1595227748-24720-1-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Pass float_status structure pointer to the pickNaN so that
machine-specific settings are available to NaN selection code.
Add use_first_nan property to float_status and use it in Xtensa-specific
pickNaN.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: "Alex Bennée" <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
target/xtensa, the only user of NO_SIGNALING_NANS macro has FPU
implementations with and without the corresponding property. With
NO_SIGNALING_NANS being a macro they cannot be a part of the same QEMU
executable.
Replace macro with new property in float_status to allow cores with
different FPU implementations coexist.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: "Alex Bennée" <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Add a sdbus_read_data() method to read multiple bytes on the
data line of a SD bus.
We might improve the tracing later, for now keep logging each
byte individually.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200814092346.21825-7-f4bug@amsat.org>
Add a sdbus_write_data() method to write multiple bytes on the
data line of a SD bus.
We might improve the tracing later, for now keep logging each
byte individually.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200814092346.21825-5-f4bug@amsat.org>
The sdbus_read_data() method do a single byte access on the data
line of a SD bus. Rename it as sdbus_read_byte() and document it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200814092346.21825-4-f4bug@amsat.org>
The sdbus_write_data() method do a single byte access on the data
line of a SD bus. Rename it as sdbus_write_byte() and document it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200814092346.21825-3-f4bug@amsat.org>
The read/write_data() methods write do a single byte access
on the data line of a SD card. Rename them as read/write_byte().
Add some documentation (not in "hw/sd/sdcard_legacy.h" which we
are going to remove soon).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200814092346.21825-2-f4bug@amsat.org>
omap_mmc.c is the last device left using the legacy sdcard API.
Move the prototype declarations into a separate header, to
make it clear this is a legacy API.
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-Id: <20180216022933.10945-8-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
sd_data_ready() belongs to the legacy API. As its last user has
been converted to the SDBus API, make it static.
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-Id: <20180216022933.10945-7-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
SD/MMC host controllers provide a SD Bus to plug SD cards,
but don't come with SD card plugged in :)
The machine/board object is where the SD cards are created.
Since the PXA2xx is not qdevified, for now create the cards
in pxa270_init() which is the SoC model.
In the future we will move this to the board model.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200705213350.24725-2-f4bug@amsat.org>
With Makefiles that have automatically generated dependencies, you
generated includes are set as dependencies of the Makefile, so that they
are built before everything else and they are available when first
building the .c files.
Alternatively you can use a fine-grained dependency, e.g.
target/arm/translate.o: target/arm/decode-neon-shared.inc.c
With Meson you have only one choice and it is a third option, namely
"build at the beginning of the corresponding target"; the way you
express it is to list the includes in the sources of that target.
The problem is that Meson decides if something is a source vs. a
generated include by looking at the extension: '.c', '.cc', '.m', '.C'
are sources, while everything else is considered an include---including
'.inc.c'.
Use '.c.inc' to avoid this, as it is consistent with our other convention
of using '.rst.inc' for included reStructuredText files. The editorconfig
file is adjusted.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Meson doesn't enjoy the same flexibility we have with Make in choosing
the include path. In particular the tracing headers are using
$(build_root)/$(<D).
In order to keep the include directives unchanged,
the simplest solution is to generate headers with patterns like
"trace/trace-audio.h" and place forwarding headers in the source tree
such that for example "audio/trace.h" includes "trace/trace-audio.h".
This patch is too ugly to be applied to the Makefiles now. It's only
a way to separate the changes to the tracing header files from the
Meson rewrite of the tracing logic.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add 5.2 machine types for arm/i440fx/q35/s390x/spapr.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200819144016.281156-1-cohuck@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Since commit 61f20b9dc5 ("spapr_nvram: Pre-initialize the NVRAM to
support the -prom-env parameter"), pseries machines can pre-initialize
the "system" partition in the NVRAM with the data passed to all -prom-env
parameters on the QEMU command line.
In this case it is assumed that all the data fits in 64 KiB, but the user
can easily pass more and crash QEMU:
$ qemu-system-ppc64 -M pseries $(for ((x=0;x<128;x++)); do \
echo -n " -prom-env " ; printf "%0.sx" {1..1024}; \
done) # this requires ~128 Kib
malloc(): corrupted top size
Aborted (core dumped)
This happens because we don't check if all the prom-env data fits in
the NVRAM and chrp_nvram_set_var() happily memcpy() it passed the
buffer.
This crash affects basically all ppc/ppc64 machine types that use -prom-env:
- pseries (all versions)
- g3beige
- mac99
and also sparc/sparc64 machine types:
- LX
- SPARCClassic
- SPARCbook
- SS-10
- SS-20
- SS-4
- SS-5
- SS-600MP
- Voyager
- sun4u
- sun4v
Add a max_len argument to chrp_nvram_create_system_partition() so that
it can check the available size before writing to memory.
Since NVRAM is populated at machine init, it seems reasonable to consider
this error as fatal. So, instead of reporting an error when we detect that
the NVRAM is too small and adapt all machine types to handle it, we simply
exit QEMU in all cases. This is still better than crashing. If someone
wants another behavior, I guess this can be reworked later.
Tested with:
$ yes q | \
(for arch in ppc ppc64 sparc sparc64; do \
echo == $arch ==; \
qemu=${arch}-softmmu/qemu-system-$arch; \
for mach in $($qemu -M help | awk '! /^Supported/ { print $1 }'); do \
echo $mach; \
$qemu -M $mach -monitor stdio -nodefaults -nographic \
$(for ((x=0;x<128;x++)); do \
echo -n " -prom-env " ; printf "%0.sx" {1..1024}; \
done) >/dev/null; \
done; echo; \
done)
Without the patch, affected machine types cause QEMU to report some
memory corruption and crash:
malloc(): corrupted top size
free(): invalid size
*** stack smashing detected ***: terminated
With the patch, QEMU prints the following message and exits:
NVRAM is too small. Try to pass less data to -prom-env
It seems that the conditions for the crash have always existed, but it
affects pseries, the machine type I care for, since commit 61f20b9dc5
only.
Fixes: 61f20b9dc5 ("spapr_nvram: Pre-initialize the NVRAM to support the -prom-env parameter")
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1867739
Reported-by: John Snow <jsnow@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <159736033937.350502.12402444542194031035.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Now that kvmppc_xive_cpu_get_state() returns negative on error, use that
and get rid of the temporary Error object and error_propagate().
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <159707852916.1489912.8376334685349668124.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since kvm_device_access() returns a negative errno on failure, convert
kvmppc_xive_set_source_config() to use it for error checking. This allows
to get rid of the local_err boilerplate.
Propagate the return value so that callers may use it as well to check
failures.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <159707848764.1489912.17078842252160674523.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since kvm_device_access() returns a negative errno on failure, convert
kvmppc_xive_get_queue_config() and kvmppc_xive_set_queue_config() to
use it for error checking. This allows to get rid of the local_err
boilerplate.
Propagate the return value so that callers may use it as well to check
failures.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <159707847357.1489912.2032291280645236480.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
kvm_set_one_reg() returns a negative errno on failure, use that instead
of errno. Also propagate it to callers so they can use it to check
for failures and hopefully get rid of their local_err boilerplate.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <159707846665.1489912.14267225652103441921.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Use error_setg_errno() instead of error_setg(strerror()). While here,
use -ret instead of errno since kvm_vcpu_enable_cap() returns a negative
errno on failure.
Use ERRP_GUARD() to ensure that errp can be passed to error_append_hint(),
and get rid of the local_err boilerplate.
Propagate the return value so that callers may use it as well to check
failures.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <159707844549.1489912.4862921680328017645.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Calls to the KVM XIVE device are guarded by kvm_irqchip_in_kernel(). This
ensures that QEMU won't try to use the device if KVM is disabled or if
an in-kernel irqchip isn't required.
When using ic-mode=dual with the pseries machine, we have two possible
interrupt controllers: XIVE and XICS. The kvm_irqchip_in_kernel() helper
will return true as soon as any of the KVM device is created. It might
lure QEMU to think that the other one is also around, while it is not.
This is exactly what happens with ic-mode=dual at machine init when
claiming IRQ numbers, which must be done on all possible IRQ backends,
eg. RTAS event sources or the PHB0 LSI table : only the KVM XICS device
is active but we end up calling kvmppc_xive_source_reset_one() anyway,
which fails. This doesn't cause any trouble because of another bug :
kvmppc_xive_source_reset_one() lacks an error_setg() and callers don't
see the failure.
Most of the other kvmppc_xive_* functions have similar xive->fd
checks to filter out the case when KVM XIVE isn't active. It
might look safer to have idempotent functions but it doesn't
really help to understand what's going on when debugging.
Since we already have all the kvm_irqchip_in_kernel() in place,
also have the callers to check xive->fd as well before calling
KVM XIVE specific code. This is straight-forward for the spapr
specific XIVE code. Some more care is needed for the platform
agnostic XIVE code since it cannot access xive->fd directly.
Introduce new in_kernel() methods in some base XIVE classes
for this purpose and implement them only in spapr.
In all cases, we still need to call kvm_irqchip_in_kernel() so that
compilers can optimize the kvmppc_xive_* calls away when CONFIG_KVM
isn't defined, thus avoiding the need for stubs.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <159679993438.876294.7285654331498605426.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Depending on whether XIVE is emultated or backed with a KVM XIVE device,
the ESB MMIOs of a XIVE source point to an I/O memory region or a mapped
memory region.
This is currently handled by checking kvm_irqchip_in_kernel() returns
false in xive_source_realize(). This is a bit awkward as we usually
need to do extra things when we're using the in-kernel backend, not
less. But most important, we can do better: turn the existing "xive.esb"
memory region into a plain container, introduce an "xive.esb-emulated"
I/O subregion and rename the existing "xive.esb" subregion in the KVM
code to "xive.esb-kvm". Since "xive.esb-kvm" is added with overlap
and a higher priority, it prevails over "xive.esb-emulated" (ie.
a guest using KVM XIVE will interact with "xive.esb-kvm" instead of
the default "xive.esb-emulated" region.
While here, consolidate the computation of the MMIO region size in
a common helper.
Suggested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <159679992680.876294.7520540158586170894.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add PPC2_FEATURE2_ARCH_3_10 to the PowerPC AT_HWCAP2 definitions.
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Message-Id: <20200724045845.89976-2-ljp@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
CONFIG_XEN is generated by configure and stored in "config-target.h",
which is (obviously) only include for target-specific objects.
This is a problem for target-agnostic objects as CONFIG_XEN is never
defined and xen_enabled() is always inlined as 'false'.
Fix by following the KVM schema, defining CONFIG_XEN_IS_POSSIBLE
when we don't know to force the call of the non-inlined function,
returning the xen_allowed boolean.
Fixes: da278d58a0 ("accel: Move Xen accelerator code under accel/xen/")
Reported-by: Paul Durrant <pdurrant@amazon.com>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20200804074930.13104-2-philmd@redhat.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
The NVIC provides an outbound qemu_irq "SYSRESETREQ" which it signals
when the guest sets the SYSRESETREQ bit in the AIRCR register. This
matches the hardware design (where the CPU has a signal of this name
and it is up to the SoC to connect that up to an actual reset
mechanism), but in QEMU it mostly results in duplicated code in SoC
objects and bugs where SoC model implementors forget to wire up the
SYSRESETREQ line.
Provide a default behaviour for the case where SYSRESETREQ is not
actually connected to anything: use qemu_system_reset_request() to
perform a system reset. This will allow us to remove the
implementations of SYSRESETREQ handling from the boards where that's
exactly what it does, and also fixes the bugs in the board models
which forgot to wire up the signal:
* microbit
* mps2-an385
* mps2-an505
* mps2-an511
* mps2-an521
* musca-a
* musca-b1
* netduino
* netduinoplus2
We still allow the board to wire up the signal if it needs to, in case
we need to model more complicated reset controller logic or to model
buggy SoC hardware which forgot to wire up the line itself. But
defaulting to "reset the system" is more often going to be correct
than defaulting to "do nothing".
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200728103744.6909-3-peter.maydell@linaro.org
Mostly devices don't need to care whether one of their output
qemu_irq lines is connected, because functions like qemu_set_irq()
silently do nothing if there is nothing on the other end. However
sometimes a device might want to implement default behaviour for the
case where the machine hasn't wired the line up to anywhere.
Provide a function qemu_irq_is_connected() that devices can use for
this purpose. (The test is trivial but encapsulating it in a
function makes it easier to see where we're doing it in case we need
to change the implementation later.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200728103744.6909-2-peter.maydell@linaro.org
Minor bugfixes all over the places, including one CVE.
Additionally, a fix for an ancient bug in migration -
one has to wonder how come no one noticed.
The fix is also non-trivial since we dare not break all
existing machine types with pci - we have a work around
in the works, for now we just skip the work-around for
old machine types.
Great job by Hogan Wang noticing, debugging and fixing it,
and thanks to Dr. David Alan Gilbert for reviewing the patches.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl8e9CIPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpsAIH/2EEq9rLpjqMJdzRvjq3/UAHsvm42zeTnJl7
81cM887Mrg2Nd7MXFoxurLK5UEehTzlD2DRTvaDFfJaJlrtkPM2QEU2X/6c3syAS
GbmOQaljQtR4zEFE81t84mZQS025Gp0s+uble7KvtXakgp1A/vdu93OEvJkhtRY8
JBdRMlTt2T0eizvHn1obBKjaQN7tAUKl5KagHWxP1ApGU0YibUbrBadpJ18ZcKMl
vwB3dwmoi4f7AjuC0GnxYKp7kC/MMhUPFoDxQKI7d+wMGFnbsAF4sBIN9EZKeOkv
xT2InNSAzk/PTSuQpnDnZQjmrf4dPuL/GNJ8vQk27eaFfVchJyc=
=Bu6o
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio,pci: bugfixes
Minor bugfixes all over the places, including one CVE.
Additionally, a fix for an ancient bug in migration -
one has to wonder how come no one noticed.
The fix is also non-trivial since we dare not break all
existing machine types with pci - we have a work around
in the works, for now we just skip the work-around for
old machine types.
Great job by Hogan Wang noticing, debugging and fixing it,
and thanks to Dr. David Alan Gilbert for reviewing the patches.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 27 Jul 2020 16:34:58 BST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
virtio-pci: fix virtio_pci_queue_enabled()
MAINTAINERS: Cover the firmware JSON schema
vhost-vdpa :Fix Coverity CID 1430270 / CID 1420267
libvhost-user: Report descriptor index on panic
Fix vhost-user buffer over-read on ram hot-unplug
hw/pci-host: save/restore pci host config register
virtio-mem-pci: force virtio version 1
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In legacy mode, virtio_pci_queue_enabled() falls back to
virtio_queue_enabled() to know if the queue is enabled.
But virtio_queue_enabled() calls again virtio_pci_queue_enabled()
if k->queue_enabled is set. This ends in a crash after a stack
overflow.
The problem can be reproduced with
"-device virtio-net-pci,disable-legacy=off,disable-modern=true
-net tap,vhost=on"
And a look to the backtrace is very explicit:
...
#4 0x000000010029a438 in virtio_queue_enabled ()
#5 0x0000000100497a9c in virtio_pci_queue_enabled ()
...
#130902 0x000000010029a460 in virtio_queue_enabled ()
#130903 0x0000000100497a9c in virtio_pci_queue_enabled ()
#130904 0x000000010029a460 in virtio_queue_enabled ()
#130905 0x0000000100454a20 in vhost_net_start ()
...
This patch fixes the problem by introducing a new function
for the legacy case and calls it from virtio_pci_queue_enabled().
It also calls it from virtio_queue_enabled() to avoid code duplication.
Fixes: f19bcdfedd ("virtio-pci: implement queue_enabled method")
Cc: Jason Wang <jasowang@redhat.com>
Cc: Cindy Lu <lulu@redhat.com>
CC: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20200727153319.43716-1-lvivier@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The pci host config register is used to save PCI address for
read/write config data. If guest writes a value to config register,
and then QEMU pauses the vcpu to migrate, after the migration, the guest
will continue to write pci config data, and the write data will be ignored
because of new qemu process losing the config register state.
To trigger the bug:
1. guest is booting in seabios.
2. guest enables the SMRAM in seabios:piix4_apmc_smm_setup, and then
expects to disable the SMRAM by pci_config_writeb.
3. after guest writes the pci host config register, QEMU pauses vcpu
to finish migration.
4. guest write of config data(0x0A) fails to disable the SMRAM because
the config register state is lost.
5. guest continues to boot and crashes in ipxe option ROM due to SMRAM
in enabled state.
Example Reproducer:
step 1. Make modifications to seabios and qemu for increase reproduction
efficiency, write 0xf0 to 0x402 port notify qemu to stop vcpu after
0x0cf8 port wrote i440 configure register. qemu stop vcpu when catch
0x402 port wrote 0xf0.
seabios:/src/hw/pci.c
@@ -52,6 +52,11 @@ void pci_config_writeb(u16 bdf, u32 addr, u8 val)
writeb(mmconfig_addr(bdf, addr), val);
} else {
outl(ioconfig_cmd(bdf, addr), PORT_PCI_CMD);
+ if (bdf == 0 && addr == 0x72 && val == 0xa) {
+ dprintf(1, "stop vcpu\n");
+ outb(0xf0, 0x402); // notify qemu to stop vcpu
+ dprintf(1, "resume vcpu\n");
+ }
outb(val, PORT_PCI_DATA + (addr & 3));
}
}
qemu:hw/char/debugcon.c
@@ -60,6 +61,9 @@ static void debugcon_ioport_write(void *opaque, hwaddr addr, uint64_t val,
printf(" [debugcon: write addr=0x%04" HWADDR_PRIx " val=0x%02" PRIx64 "]\n", addr, val);
#endif
+ if (ch == 0xf0) {
+ vm_stop(RUN_STATE_PAUSED);
+ }
/* XXX this blocks entire thread. Rewrite to use
* qemu_chr_fe_write and background I/O callbacks */
qemu_chr_fe_write_all(&s->chr, &ch, 1);
step 2. start vm1 by the following command line, and then vm stopped.
$ qemu-system-x86_64 -machine pc-i440fx-5.0,accel=kvm\
-netdev tap,ifname=tap-test,id=hostnet0,vhost=on,downscript=no,script=no\
-device virtio-net-pci,netdev=hostnet0,id=net0,bus=pci.0,addr=0x13,bootindex=3\
-device cirrus-vga,id=video0,vgamem_mb=16,bus=pci.0,addr=0x2\
-chardev file,id=seabios,path=/var/log/test.seabios,append=on\
-device isa-debugcon,iobase=0x402,chardev=seabios\
-monitor stdio
step 3. start vm2 to accept vm1 state.
$ qemu-system-x86_64 -machine pc-i440fx-5.0,accel=kvm\
-netdev tap,ifname=tap-test1,id=hostnet0,vhost=on,downscript=no,script=no\
-device virtio-net-pci,netdev=hostnet0,id=net0,bus=pci.0,addr=0x13,bootindex=3\
-device cirrus-vga,id=video0,vgamem_mb=16,bus=pci.0,addr=0x2\
-chardev file,id=seabios,path=/var/log/test.seabios,append=on\
-device isa-debugcon,iobase=0x402,chardev=seabios\
-monitor stdio \
-incoming tcp:127.0.0.1:8000
step 4. execute the following qmp command in vm1 to migrate.
(qemu) migrate tcp:127.0.0.1:8000
step 5. execute the following qmp command in vm2 to resume vcpu.
(qemu) cont
Before this patch, we get KVM "emulation failure" error on vm2.
This patch fixes it.
Cc: qemu-stable@nongnu.org
Signed-off-by: Hogan Wang <hogan.wang@huawei.com>
Message-Id: <20200727084621.3279-1-hogan.wang@huawei.com>
Reported-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Plain MAP_FIXED has the undesirable behaviour of splatting exiting
maps so we don't actually achieve what we want when looking for gaps.
We should be using MAP_FIXED_NOREPLACE. As this isn't always available
we need to potentially check the returned address to see if the kernel
gave us what we asked for.
Fixes: ad592e37df ("linux-user: provide fallback pgd_find_hole for bare chroots")
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200724064509.331-9-alex.bennee@linaro.org>
Quoting ISO C99 6.7.8p4, "All the expressions in an initializer for an
object that has static storage duration shall be constant expressions or
string literals".
The compound literal produced by the make_floatx80() macro is not such a
constant expression, per 6.6p7-9. (An implementation may accept it,
according to 6.6p10, but is not required to.)
Therefore using "floatx80_zero" and make_floatx80() for initializing
"f2xm1_table" and "fpatan_table" is not portable. And gcc-4.8 in RHEL-7.6
actually chokes on them:
> target/i386/fpu_helper.c:871:5: error: initializer element is not constant
> { make_floatx80(0xbfff, 0x8000000000000000ULL),
> ^
We've had the make_floatx80_init() macro for this purpose since commit
3bf7e40ab9 ("softfloat: fix for C99", 2012-03-17), so let's use that
macro again.
Fixes: eca30647fc ("target/i386: reimplement f2xm1 using floatx80 operations")
Fixes: ff57bb7b63 ("target/i386: reimplement fpatan using floatx80 operations")
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Joseph Myers <joseph@codesourcery.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Link: https://lists.gnu.org/archive/html/qemu-devel/2017-08/msg06566.html
Link: https://lists.gnu.org/archive/html/qemu-devel/2020-07/msg04714.html
Message-Id: <20200716144251.23004-1-lersek@redhat.com>
Message-Id: <20200724064509.331-8-alex.bennee@linaro.org>
This will be used in a future patch. For POSIX systems _SC_PHYS_PAGES
isn't standardised but at least appears in the man pages for
Open/FreeBSD. The result is advisory so any users of it shouldn't just
fail if we can't work it out.
The win32 stub currently returns 0 until someone with a Windows system
can develop and test a patch.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: BALATON Zoltan <balaton@eik.bme.hu>
Cc: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Message-Id: <20200724064509.331-5-alex.bennee@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEuBi5yt+QicLVzsZrda1lgCoLQhEFAl8beSIACgkQda1lgCoL
QhEYJwf/X+mekAhZ1os77TvEbA+YVoPrXnPEu1UTWVHBWkmzQisk2eRMj1LlA2+T
a+kEpbw+a1oc3GSWBHXJIVWuFOcA+GEDFerpQypSowAVJHPKam3xPBraP/R+bjXq
e3D7WDMfjOE2sZ2Aj1I9sBZnKOI5yg9GcQ2PjB6btAB2eKJjns2myvhWiA5XEa/H
l+eKtej3u8CvQ51vIrTxV/pvEqhPl1b4kvjj+40/COSMIcQ5OWdVk3de1ty9I8dP
UjeaPRVXsJqYo/ZsUZS/uAdPIn8Ih77OtJRAEGSNe/KgttPQ/EG94mhiEws8xl+b
JiV5HehRW0LB+f6eVGrQ0SbH7TCkCA==
=/17e
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanberger/tags/pull-tpm-2020-07-24-1' into staging
Merge tpm 2020/07/24 v1
# gpg: Signature made Sat 25 Jul 2020 01:13:22 BST
# gpg: using RSA key B818B9CADF9089C2D5CEC66B75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211
* remotes/stefanberger/tags/pull-tpm-2020-07-24-1:
tpm_emulator: Report an error if chardev is missing
tpm: Improve help on TPM types when none are available
Revert "tpm: Clean up error reporting in tpm_init_tpmdev()"
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This reverts commit d10e05f15d.
We report some -tpmdev failures, but then continue as if all was fine.
Reproducer:
$ qemu-system-x86_64 -nodefaults -S -display none -monitor stdio -chardev null,id=tpm0 -tpmdev emulator,id=tpm0,chardev=chrtpm -device tpm-tis,tpmdev=tpm0
qemu-system-x86_64: -tpmdev emulator,id=tpm0,chardev=chrtpm: tpm-emulator: tpm chardev 'chrtpm' not found.
qemu-system-x86_64: -tpmdev emulator,id=tpm0,chardev=chrtpm: tpm-emulator: Could not cleanly shutdown the TPM: No such file or directory
QEMU 5.0.90 monitor - type 'help' for more information
(qemu) qemu-system-x86_64: -device tpm-tis,tpmdev=tpm0: Property 'tpm-tis.tpmdev' can't find value 'tpm0'
$ echo $?
1
This is a regression caused by commit d10e05f15d "tpm: Clean up error
reporting in tpm_init_tpmdev()". It's incomplete: be->create(opts)
continues to use error_report(), and we don't set an error when it
fails.
I figure converting the create() methods to Error would make some
sense, but I'm not sure it's worth the effort right now. Revert the
broken commit instead, and add a comment to tpm_init_tpmdev().
Straightforward conflict in tpm.c resolved.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
error_propagate_prepend() "behaves like error_prepend()", and
error_prepend() uses "formatting @fmt, ... like printf()".
error_prepend() checks its format string argument, but
error_propagate_prepend() does not. Fix by addint the format
attribute to error_propagate_prepend() and error_vprepend().
This would have caught the bug fixed in the previous commit.
Missed in commit 4b5766488f "error: Fix use of error_prepend() with
&error_fatal, &error_abort".
Inspired-by: Stefan Weil <sw@weilnetz.de>
Suggested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200723171205.14949-1-philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The main fix is the correction of the goldfish RTC time. On top of that
some small fixes to the recently added vector extensions have been added
(including an assert that fixed a coverity report). There is a change in
the SiFive E debug memory size to match hardware. Finally there is a fix
for PMP accesses.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAl8YbM8ACgkQIeENKd+X
cFRusgf+NpstlmK/+35DimtJ9oYV2H+NSE7D9HDEdgm2PszYNDjEiWRMBCl1B2JS
3vTutR198USdcJtdXFrFooaxZaMNf0FQJ7p82BUnNOlUNy7vyFlsRQX687KWJh3+
F0t9MsaBVY3G1UiY6vke2vPdcHNG0cAPUwEWjKIU7E7nBmbvNnZZyXxYGC7yjCBI
GQ1TKqso9wKtvAyc6cNGPcsUUM8P+LI5H+UzQR8A1LZ5bohKIQW+xrdJe6HqGMs1
3xZ4tQS2AG5XaaKz74/AdTJSTf80plG2jDomI9fBoNjqRnyPRAlwgzO88Hc24Bcm
RLzL51UaQv+EddxspAW9gH9FHJRvfA==
=6MUF
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-to-apply-20200722-1' into staging
This PR contains a few RISC-V fixes.
The main fix is the correction of the goldfish RTC time. On top of that
some small fixes to the recently added vector extensions have been added
(including an assert that fixed a coverity report). There is a change in
the SiFive E debug memory size to match hardware. Finally there is a fix
for PMP accesses.
# gpg: Signature made Wed 22 Jul 2020 17:43:59 BST
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054
* remotes/alistair/tags/pull-riscv-to-apply-20200722-1:
target/riscv: Fix the range of pmpcfg of CSR funcion table
hw/riscv: sifive_e: Correct debug block size
target/riscv: fix vector index load/store constraints
target/riscv: Quiet Coverity complains about vamo*
goldfish_rtc: Fix non-atomic read behaviour of TIME_LOW/TIME_HIGH
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix bug in ACPI which were tripping up guests.
Fix a use-after-free with hotplug of virtio devices.
Block ability to create legacy devices which shouldn't have been
there in the first place.
Fix migration error handling with balloon.
Drop some dead code in virtio.
vtd emulation fixup.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl8YK/4PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpCE4H/1+15xjUiKD0sxnvPdKezbDhtAW0YPY/cHC0
KJRWFDbK/+cl9ZkJQBqUXASV3KWnjSKjQrVph6vtg8huqhhDsnha1JGgamhOa9tC
7rH8RkMA6nUF/su8xnkNyNBfG2lHk6ETyKvvTtuLHzjbkzWd6OYtaQAQJTYI6TVB
aY+MCIT7xfucsL6JaHA8BTccOOjz7pxc6dL4NsQCR3cZkwTtB9JOE5UwgM3IyNP/
DcbFyVUDkXYtlpKU/xO+ZICbxCNsZmHzpnV8KJ07vyJdAhL1hRAayMkNG4xLzW0n
f/ZMlJna5jDP3fRqgVvu8XbY3TcCx1XOBD9ebH5E6hvhWnp8oHI=
=SJjI
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
acpi,virtio,pc: bugfixes
Fix bug in ACPI which were tripping up guests.
Fix a use-after-free with hotplug of virtio devices.
Block ability to create legacy devices which shouldn't have been
there in the first place.
Fix migration error handling with balloon.
Drop some dead code in virtio.
vtd emulation fixup.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed 22 Jul 2020 13:07:26 BST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
virtio-pci: Changed vdev to proxy for VirtIO PCI BAR callbacks.
intel_iommu: Use correct shift for 256 bits qi descriptor
virtio: verify that legacy support is not accidentally on
virtio: list legacy-capable devices
virtio-balloon: Replace free page hinting references to 'report' with 'hint'
virtio-balloon: Add locking to prevent possible race when starting hinting
virtio-balloon: Prevent guest from starting a report when we didn't request one
virtio: Drop broken and superfluous object_property_set_link()
acpi: accept byte and word access to core ACPI registers
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The specification says:
0x00 TIME_LOW R: Get current time, then return low-order 32-bits.
0x04 TIME_HIGH R: Return high 32-bits from previous TIME_LOW read.
...
To read the value, the kernel must perform an IO_READ(TIME_LOW),
which returns an unsigned 32-bit value, before an IO_READ(TIME_HIGH),
which returns a signed 32-bit value, corresponding to the higher half
of the full value.
However, we were just returning the current time for both. If the guest
is unlucky enough to read TIME_LOW and TIME_HIGH either side of an
overflow of the lower half, it will see time be in the future, before
jumping backwards on the next read, and Linux currently relies on the
atomicity guaranteed by the spec so is affected by this. Fix this
violation of the spec by caching the correct value for TIME_HIGH
whenever TIME_LOW is read, and returning that value for any TIME_HIGH
read.
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200718004934.83174-1-jrtc27@jrtc27.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Several types of virtio devices had already been around before the
virtio standard was specified. These devices support virtio in legacy
(and transitional) mode.
Devices that have been added in the virtio standard are considered
non-transitional (i.e. with no support for legacy virtio).
Provide a helper function so virtio transports can figure that out
easily.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200707105446.677966-2-cohuck@redhat.com>
Cc: qemu-stable@nongnu.org
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Recently a feature named Free Page Reporting was added to the virtio
balloon. In order to avoid any confusion we should drop the use of the word
'report' when referring to Free Page Hinting. So what this patch does is go
through and replace all instances of 'report' with 'hint" when we are
referring to free page hinting.
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Message-Id: <20200720175128.21935.93927.stgit@localhost.localdomain>
Cc: qemu-stable@nongnu.org
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
