Just like range_overlaps_range(), use the returned bool value
to check whether 2 given ranges overlap.
Signed-off-by: Yao Xingtao <yaoxt.fnst@fujitsu.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240722040742.11513-2-yaoxt.fnst@fujitsu.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This API is specific to TCG (already handled by hardware
accelerators), so restrict it with #ifdef'ry. Remove
unnecessary stubs.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240529155918.6221-1-philmd@linaro.org>
The property 'x-pre-copy-dirty-page-tracking' allows disabling the whole
tracking of VF pre-copy phase of dirty page tracking, though it means
that it will only be used at the start of the switchover phase.
Add an option that disables the VF dirty page tracking, and fall
back into container-based dirty page tracking. This also allows to
use IOMMU dirty tracking even on VFs with their own dirty
tracker scheme.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
ioctl(iommufd, IOMMU_HWPT_GET_DIRTY_BITMAP, arg) is the UAPI
that fetches the bitmap that tells what was dirty in an IOVA
range.
A single bitmap is allocated and used across all the hwpts
sharing an IOAS which is then used in log_sync() to set Qemu
global bitmaps.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
ioctl(iommufd, IOMMU_HWPT_SET_DIRTY_TRACKING, arg) is the UAPI that
enables or disables dirty page tracking. The ioctl is used if the hwpt
has been created with dirty tracking supported domain (stored in
hwpt::flags) and it is called on the whole list of iommu domains.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
In preparation to using the dirty tracking UAPI, probe whether the IOMMU
supports dirty tracking. This is done via the data stored in
hiod::caps::hw_caps initialized from GET_HW_INFO.
Qemu doesn't know if VF dirty tracking is supported when allocating
hardware pagetable in iommufd_cdev_autodomains_get(). This is because
VFIODevice migration state hasn't been initialized *yet* hence it can't pick
between VF dirty tracking vs IOMMU dirty tracking. So, if IOMMU supports
dirty tracking it always creates HWPTs with IOMMU_HWPT_ALLOC_DIRTY_TRACKING
even if later on VFIOMigration decides to use VF dirty tracking instead.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
[ clg: - Fixed vbasedev->iommu_dirty_tracking assignment in
iommufd_cdev_autodomains_get()
- Added warning for heterogeneous dirty page tracking support
in iommufd_cdev_autodomains_get() ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Move the HostIOMMUDevice::realize() to be invoked during the attach of the device
before we allocate IOMMUFD hardware pagetable objects (HWPT). This allows the use
of the hw_caps obtained by IOMMU_GET_HW_INFO that essentially tell if the IOMMU
behind the device supports dirty tracking.
Note: The HostIOMMUDevice data from legacy backend is static and doesn't
need any information from the (type1-iommu) backend to be initialized.
In contrast however, the IOMMUFD HostIOMMUDevice data requires the
iommufd FD to be connected and having a devid to be able to successfully
GET_HW_INFO. This means vfio_device_hiod_realize() is called in
different places within the backend .attach_device() implementation.
Suggested-by: Cédric Le Goater <clg@redhat.cm>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
[ clg: Fixed error handling in iommufd_cdev_attach() ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Store the value of @caps returned by iommufd_backend_get_device_info()
in a new field HostIOMMUDeviceCaps::hw_caps. Right now the only value is
whether device IOMMU supports dirty tracking (IOMMU_HW_CAP_DIRTY_TRACKING).
This is in preparation for HostIOMMUDevice::realize() being called early
during attach_device().
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Remove caps::aw_bits which requires the bcontainer::iova_ranges being
initialized after device is actually attached. Instead defer that to
.get_cap() and call vfio_device_get_aw_bits() directly.
This is in preparation for HostIOMMUDevice::realize() being called early
during attach_device().
Suggested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
There's generally two modes of operation for IOMMUFD:
1) The simple user API which intends to perform relatively simple things
with IOMMUs e.g. DPDK. The process generally creates an IOAS and attaches
to VFIO and mainly performs IOAS_MAP and UNMAP.
2) The native IOMMUFD API where you have fine grained control of the
IOMMU domain and model it accordingly. This is where most new feature
are being steered to.
For dirty tracking 2) is required, as it needs to ensure that
the stage-2/parent IOMMU domain will only attach devices
that support dirty tracking (so far it is all homogeneous in x86, likely
not the case for smmuv3). Such invariant on dirty tracking provides a
useful guarantee to VMMs that will refuse incompatible device
attachments for IOMMU domains.
Dirty tracking insurance is enforced via HWPT_ALLOC, which is
responsible for creating an IOMMU domain. This is contrast to the
'simple API' where the IOMMU domain is created by IOMMUFD automatically
when it attaches to VFIO (usually referred as autodomains) but it has
the needed handling for mdevs.
To support dirty tracking with the advanced IOMMUFD API, it needs
similar logic, where IOMMU domains are created and devices attached to
compatible domains. Essentially mimicking kernel
iommufd_device_auto_get_domain(). With mdevs given there's no IOMMU domain
it falls back to IOAS attach.
The auto domain logic allows different IOMMU domains to be created when
DMA dirty tracking is not desired (and VF can provide it), and others where
it is. Here it is not used in this way given how VFIODevice migration
state is initialized after the device attachment. But such mixed mode of
IOMMU dirty tracking + device dirty tracking is an improvement that can
be added on. Keep the 'all of nothing' of type1 approach that we have
been using so far between container vs device dirty tracking.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
[ clg: Added ERRP_GUARD() in iommufd_cdev_autodomains_get() ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
The helper will be able to fetch vendor agnostic IOMMU capabilities
supported both by hardware and software. Right now it is only iommu dirty
tracking.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
In preparation to skip initialization of the HostIOMMUDevice for mdev,
extract the checks that validate if a device is an mdev into helpers.
A vfio_device_is_mdev() is created, and subsystems consult VFIODevice::mdev
to check if it's mdev or not.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
target/arm: Use set_helper_retaddr for dc_zva, sve and sme
target/ppc: Tidy dcbz helpers
target/ppc: Use set_helper_retaddr for dcbz
target/s390x: Use set_helper_retaddr in mem_helper.c
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmafJKIdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV+FBAf7Bup+karxeGHZx2rN
cPeF248bcCWTxBWHK7dsYze4KqzsrlNIJlPeOKErU2bbbRDZGhOp1/N95WVz+P8V
6Ny63WTsAYkaFWKxE6Jf0FWJlGw92btk75pTV2x/TNZixg7jg0vzVaYkk0lTYc5T
m5e4WycYEbzYm0uodxI09i+wFvpd+7WCnl6xWtlJPWZENukvJ36Ss43egFMDtuMk
vTJuBkS9wpwZ9MSi6EY6M+Raieg8bfaotInZeDvE/yRPNi7CwrA7Dgyc1y626uBA
joGkYRLzhRgvT19kB3bvFZi1AXa0Pxr+j0xJqwspP239Gq5qezlS5Bv/DrHdmGHA
jaqSwg==
=XgUE
-----END PGP SIGNATURE-----
Merge tag 'pull-tcg-20240723' of https://gitlab.com/rth7680/qemu into staging
accel/tcg: Export set/clear_helper_retaddr
target/arm: Use set_helper_retaddr for dc_zva, sve and sme
target/ppc: Tidy dcbz helpers
target/ppc: Use set_helper_retaddr for dcbz
target/s390x: Use set_helper_retaddr in mem_helper.c
# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmafJKIdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV+FBAf7Bup+karxeGHZx2rN
# cPeF248bcCWTxBWHK7dsYze4KqzsrlNIJlPeOKErU2bbbRDZGhOp1/N95WVz+P8V
# 6Ny63WTsAYkaFWKxE6Jf0FWJlGw92btk75pTV2x/TNZixg7jg0vzVaYkk0lTYc5T
# m5e4WycYEbzYm0uodxI09i+wFvpd+7WCnl6xWtlJPWZENukvJ36Ss43egFMDtuMk
# vTJuBkS9wpwZ9MSi6EY6M+Raieg8bfaotInZeDvE/yRPNi7CwrA7Dgyc1y626uBA
# joGkYRLzhRgvT19kB3bvFZi1AXa0Pxr+j0xJqwspP239Gq5qezlS5Bv/DrHdmGHA
# jaqSwg==
# =XgUE
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 23 Jul 2024 01:33:54 PM AEST
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]
* tag 'pull-tcg-20240723' of https://gitlab.com/rth7680/qemu:
target/riscv: Simplify probing in vext_ldff
target/s390x: Use set/clear_helper_retaddr in mem_helper.c
target/s390x: Use user_or_likely in access_memmove
target/s390x: Use user_or_likely in do_access_memset
target/ppc: Improve helper_dcbz for user-only
target/ppc: Merge helper_{dcbz,dcbzep}
target/ppc: Split out helper_dbczl for 970
target/ppc: Hoist dcbz_size out of dcbz_common
target/ppc/mem_helper.c: Remove a conditional from dcbz_common()
target/arm: Use set/clear_helper_retaddr in SVE and SME helpers
target/arm: Use set/clear_helper_retaddr in helper-a64.c
accel/tcg: Move {set,clear}_helper_retaddr to cpu_ldst.h
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use of these in helpers goes hand-in-hand with tlb_vaddr_to_host
and other probing functions.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Setup Data Object Exchange (DOE) as an extended capability for the NVME
controller and connect SPDM to it (CMA) to it.
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Klaus Jensen <k.jensen@samsung.com>
Message-Id: <20240703092027.644758-4-alistair.francis@wdc.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
SPDM enables authentication, attestation and key exchange to assist in
providing infrastructure security enablement. It's a standard published
by the DMTF [1].
SPDM supports multiple transports, including PCIe DOE and MCTP.
This patch adds support to QEMU to connect to an external SPDM
instance.
SPDM support can be added to any QEMU device by exposing a
TCP socket to a SPDM server. The server can then implement the SPDM
decoding/encoding support, generally using libspdm [2].
This is similar to how the current TPM implementation works and means
that the heavy lifting of setting up certificate chains, capabilities,
measurements and complex crypto can be done outside QEMU by a well
supported and tested library.
1: https://www.dmtf.org/standards/SPDM
2: https://github.com/DMTF/libspdm
Signed-off-by: Huai-Cheng Kuo <hchkuo@avery-design.com.tw>
Signed-off-by: Chris Browy <cbrowy@avery-design.com>
Co-developed-by: Jonathan Cameron <Jonathan.cameron@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
[ Changes by WM
- Bug fixes from testing
]
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
[ Changes by AF:
- Convert to be more QEMU-ified
- Move to backends as it isn't PCIe specific
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20240703092027.644758-3-alistair.francis@wdc.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add all of the defined protocols/features from the PCIe-SIG r6.0
"Table 6-32 PCI-SIG defined Data Object Types (Vendor ID = 0001h)"
table.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Message-Id: <20240703092027.644758-2-alistair.francis@wdc.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now we have switched to PCIIOMMUOps to convey host IOMMU information,
the host reserved regions are transmitted when the PCIe topology is
built. This happens way before the virtio-iommu driver calls the probe
request. So let's remove the probe_done flag that allowed to check
the probe was not done before the IOMMU MR got enabled. Besides this
probe_done flag had a flaw wrt migration since it was not saved/restored.
The only case at risk is if 2 devices were plugged to a
PCIe to PCI bridge and thus aliased. First of all we
discovered in the past this case was not properly supported for
neither SMMU nor virtio-iommu on guest kernel side: see
[RFC] virtio-iommu: Take into account possible aliasing in virtio_iommu_mr()
https://lore.kernel.org/all/20230116124709.793084-1-eric.auger@redhat.com/
If this were supported by the guest kernel, it is unclear what the call
sequence would be from a virtio-iommu driver point of view.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20240716094619.1713905-3-eric.auger@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add common function to help unregister the GDB register space. This shall be
done in context to the CPU unrealization.
Note: These are common functions exported to arch specific code. For example,
for ARM this code is being referred in associated arch specific patch-set:
Link: https://lore.kernel.org/qemu-devel/20230926103654.34424-1-salil.mehta@huawei.com/
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Xianglai Li <lixianglai@loongson.cn>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Reviewed-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
Tested-by: Zhao Liu <zhao1.liu@intel.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240716111502.202344-8-salil.mehta@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Virtual CPU Hot-unplug leads to unrealization of a CPU object. This also
involves destruction of the CPU AddressSpace. Add common function to help
destroy the CPU AddressSpace.
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Xianglai Li <lixianglai@loongson.cn>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Tested-by: Zhao Liu <zhao1.liu@intel.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240716111502.202344-7-salil.mehta@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
CPUs Control device(\\_SB.PCI0) register interface for the x86 arch is IO port
based and existing CPUs AML code assumes _CRS objects would evaluate to a system
resource which describes IO Port address. But on ARM arch CPUs control
device(\\_SB.PRES) register interface is memory-mapped hence _CRS object should
evaluate to system resource which describes memory-mapped base address. Update
build CPUs AML function to accept both IO/MEMORY region spaces and accordingly
update the _CRS object.
Co-developed-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Xianglai Li <lixianglai@loongson.cn>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Tested-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240716111502.202344-6-salil.mehta@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
OSPM evaluates _EVT method to map the event. The CPU hotplug event eventually
results in start of the CPU scan. Scan figures out the CPU and the kind of
event(plug/unplug) and notifies it back to the guest. Update the GED AML _EVT
method with the call to method \\_SB.CPUS.CSCN (via \\_SB.GED.CSCN)
Architecture specific code [1] might initialize its CPUs AML code by calling
common function build_cpus_aml() like below for ARM:
build_cpus_aml(scope, ms, opts, xx_madt_cpu_entry, memmap[VIRT_CPUHP_ACPI].base,
"\\_SB", "\\_SB.GED.CSCN", AML_SYSTEM_MEMORY);
[1] https://lore.kernel.org/qemu-devel/20240613233639.202896-13-salil.mehta@huawei.com/
Co-developed-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
Tested-by: Xianglai Li <lixianglai@loongson.cn>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Tested-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240716111502.202344-5-salil.mehta@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
ACPI GED (as described in the ACPI 6.4 spec) uses an interrupt listed in the
_CRS object of GED to intimate OSPM about an event. Later then demultiplexes the
notified event by evaluating ACPI _EVT method to know the type of event. Use
ACPI GED to also notify the guest kernel about any CPU hot(un)plug events.
Note, GED interface is used by many hotplug events like memory hotplug, NVDIMM
hotplug and non-hotplug events like system power down event. Each of these can
be selected using a bit in the 32 bit GED IO interface. A bit has been reserved
for the CPU hotplug event.
ACPI CPU hotplug related initialization should only happen if ACPI_CPU_HOTPLUG
support has been enabled for particular architecture. Add cpu_hotplug_hw_init()
stub to avoid compilation break.
Co-developed-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
Tested-by: Xianglai Li <lixianglai@loongson.cn>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Reviewed-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
Tested-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20240716111502.202344-4-salil.mehta@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
CPU ctrl-dev MMIO region length could be used in ACPI GED and various other
architecture specific places. Move ACPI_CPU_HOTPLUG_REG_LEN macro to more
appropriate common header file.
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
Tested-by: Xianglai Li <lixianglai@loongson.cn>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Tested-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240716111502.202344-3-salil.mehta@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
KVM vCPU creation is done once during the vCPU realization when Qemu vCPU thread
is spawned. This is common to all the architectures as of now.
Hot-unplug of vCPU results in destruction of the vCPU object in QOM but the
corresponding KVM vCPU object in the Host KVM is not destroyed as KVM doesn't
support vCPU removal. Therefore, its representative KVM vCPU object/context in
Qemu is parked.
Refactor architecture common logic so that some APIs could be reused by vCPU
Hotplug code of some architectures likes ARM, Loongson etc. Update new/old APIs
with trace events. New APIs qemu_{create,park,unpark}_vcpu() can be externally
called. No functional change is intended here.
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Xianglai Li <lixianglai@loongson.cn>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Reviewed-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240716111502.202344-2-salil.mehta@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently QEMU describes initial[1] RAM* in SMBIOS as a series of
virtual DIMMs (capped at 16Gb max) using type 17 structure entries.
Which is fine for the most cases. However when starting guest
with terabytes of RAM this leads to too many memory device
structures, which eventually upsets linux kernel as it reserves
only 64K for these entries and when that border is crossed out
it runs out of reserved memory.
Instead of partitioning initial RAM on 16Gb DIMMs, use maximum
possible chunk size that SMBIOS spec allows[2]. Which lets
encode RAM in lower 31 bits of 32bit field (which amounts upto
2047Tb per DIMM).
As result initial RAM will generate only one type 17 structure
until host/guest reach ability to use more RAM in the future.
Compat changes:
We can't unconditionally change chunk size as it will break
QEMU<->guest ABI (and migration). Thus introduce a new machine
class field that would let older versioned machines to use
legacy 16Gb chunks, while new(er) machine type[s] use maximum
possible chunk size.
PS:
While it might seem to be risky to rise max entry size this large
(much beyond of what current physical RAM modules support),
I'd not expect it causing much issues, modulo uncovering bugs
in software running within guest. And those should be fixed
on guest side to handle SMBIOS spec properly, especially if
guest is expected to support so huge RAM configs.
In worst case, QEMU can reduce chunk size later if we would
care enough about introducing a workaround for some 'unfixable'
guest OS, either by fixing up the next machine type or
giving users a CLI option to customize it.
1) Initial RAM - is RAM configured with help '-m SIZE' CLI option/
implicitly defined by machine. It doesn't include memory
configured with help of '-device' option[s] (pcdimm,nvdimm,...)
2) SMBIOS 3.1.0 7.18.5 Memory Device — Extended Size
PS:
* tested on 8Tb host with RHEL6 guest, which seems to parse
type 17 SMBIOS table entries correctly (according to 'dmidecode').
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240715122417.4059293-1-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Allow user to attach SR-IOV VF to a virtio-pci PF.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240715-sriov-v5-6-3f5539093ffc@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A user can create a SR-IOV device by specifying the PF with the
sriov-pf property of the VFs. The VFs must be added before the PF.
A user-creatable VF must have PCIDeviceClass::sriov_vf_user_creatable
set. Such a VF cannot refer to the PF because it is created before the
PF.
A PF that user-creatable VFs can be attached calls
pcie_sriov_pf_init_from_user_created_vfs() during realization and
pcie_sriov_pf_exit() when exiting.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240715-sriov-v5-5-3f5539093ffc@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Starting with the "Sandy Bridge" generation, Intel CPUs provide a RAPL
interface (Running Average Power Limit) for advertising the accumulated
energy consumption of various power domains (e.g. CPU packages, DRAM,
etc.).
The consumption is reported via MSRs (model specific registers) like
MSR_PKG_ENERGY_STATUS for the CPU package power domain. These MSRs are
64 bits registers that represent the accumulated energy consumption in
micro Joules. They are updated by microcode every ~1ms.
For now, KVM always returns 0 when the guest requests the value of
these MSRs. Use the KVM MSR filtering mechanism to allow QEMU handle
these MSRs dynamically in userspace.
To limit the amount of system calls for every MSR call, create a new
thread in QEMU that updates the "virtual" MSR values asynchronously.
Each vCPU has its own vMSR to reflect the independence of vCPUs. The
thread updates the vMSR values with the ratio of energy consumed of
the whole physical CPU package the vCPU thread runs on and the
thread's utime and stime values.
All other non-vCPU threads are also taken into account. Their energy
consumption is evenly distributed among all vCPUs threads running on
the same physical CPU package.
To overcome the problem that reading the RAPL MSR requires priviliged
access, a socket communication between QEMU and the qemu-vmsr-helper is
mandatory. You can specified the socket path in the parameter.
This feature is activated with -accel kvm,rapl=true,path=/path/sock.sock
Actual limitation:
- Works only on Intel host CPU because AMD CPUs are using different MSR
adresses.
- Only the Package Power-Plane (MSR_PKG_ENERGY_STATUS) is reported at
the moment.
Signed-off-by: Anthony Harivel <aharivel@redhat.com>
Link: https://lore.kernel.org/r/20240522153453.1230389-4-aharivel@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Extend copy command to copy user data across different namespaces via
support for specifying a namespace for each source range
Signed-off-by: Arun Kumar <arun.kka@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
The function qio_channel_get_peercred() returns a pointer to the
credentials of the peer process connected to this socket.
This credentials structure is defined in <sys/socket.h> as follows:
struct ucred {
pid_t pid; /* Process ID of the sending process */
uid_t uid; /* User ID of the sending process */
gid_t gid; /* Group ID of the sending process */
};
The use of this function is possible only for connected AF_UNIX stream
sockets and for AF_UNIX stream and datagram socket pairs.
On platform other than Linux, the function return 0.
Signed-off-by: Anthony Harivel <aharivel@redhat.com>
Link: https://lore.kernel.org/r/20240522153453.1230389-2-aharivel@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
"semihosting/syscalls.h" requires definitions from
"gdbstub/syscalls.h", include it in order to avoid:
include/semihosting/syscalls.h:23:38: error: unknown type name 'gdb_syscall_complete_cb'
void semihost_sys_open(CPUState *cs, gdb_syscall_complete_cb complete,
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240717105723.58965-2-philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240718094523.1198645-9-alex.bennee@linaro.org>
Coverity reported a memory leak (CID 1549757) in this code and its
admittedly rather clumsy handling of extending the command table.
Instead of handing over a full array of the commands lets use the
lighter weight GPtrArray and simply test for the presence of each
entry as we go. This avoids complications of transferring ownership of
arrays and keeps the final command entries as static entries in the
target code.
Cc: Akihiko Odaki <akihiko.odaki@daynix.com>
Cc: Gustavo Bueno Romero <gustavo.romero@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Gustavo Romero <gustavo.romero@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240718094523.1198645-4-alex.bennee@linaro.org>
Extend the virtio device property definitions to include the
VIRTIO_F_IN_ORDER feature.
The default state of this feature is disabled, allowing it to be
explicitly enabled where it's supported.
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20240710125522.4168043-7-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add the boolean 'in_order_filled' member to the VirtQueueElement structure.
The use of this boolean will signify whether the element has been processed
and is ready to be flushed (so long as the element is in-order). This
boolean is used to support the VIRTIO_F_IN_ORDER feature.
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20240710125522.4168043-2-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Implement transfer and activate functionality per 3.1 spec for
supporting update metadata (no actual buffers). Transfer times
are arbitrarily set to ten and two seconds for full and part
transfers, respectively.
cxl update-firmware mem0 -F fw.img
<on-going fw update>
cxl update-firmware mem0
"memdev":"mem0",
"pmem_size":"1024.00 MiB (1073.74 MB)",
"serial":"0",
"host":"0000:0d:00.0",
"firmware":{
"num_slots":2,
"active_slot":1,
"online_activate_capable":true,
"slot_1_version":"BWFW VERSION 0",
"fw_update_in_progress":true,
"remaining_size":22400
}
}
<completed fw update>
cxl update-firmware mem0
{
"memdev":"mem0",
"pmem_size":"1024.00 MiB (1073.74 MB)",
"serial":"0",
"host":"0000:0d:00.0",
"firmware":{
"num_slots":2,
"active_slot":1,
"staged_slot":2,
"online_activate_capable":true,
"slot_1_version":"BWFW VERSION 0",
"slot_2_version":"BWFW VERSION 1",
"fw_update_in_progress":false
}
}
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20240627164912.25630-1-dave@stgolabs.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705125915.991672-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
CXL spec 3.1 section 8.2.9.9.11.2 describes the DDR5 Error Check Scrub (ECS)
control feature.
The Error Check Scrub (ECS) is a feature defined in JEDEC DDR5 SDRAM
Specification (JESD79-5) and allows the DRAM to internally read, correct
single-bit errors, and write back corrected data bits to the DRAM array
while providing transparency to error counts. The ECS control feature
allows the request to configure ECS input configurations during system
boot or at run-time.
The ECS control allows the requester to change the log entry type, the ECS
threshold count provided that the request is within the definition
specified in DDR5 mode registers, change mode between codeword mode and
row count mode, and reset the ECS counter.
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Link: https://lore.kernel.org/r/20240223085902.1549-4-shiju.jose@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705123039.963781-5-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
CXL spec 3.1 section 8.2.9.9.11.1 describes the device patrol scrub control
feature. The device patrol scrub proactively locates and makes corrections
to errors in regular cycle. The patrol scrub control allows the request to
configure patrol scrub input configurations.
The patrol scrub control allows the requester to specify the number of
hours for which the patrol scrub cycles must be completed, provided that
the requested number is not less than the minimum number of hours for the
patrol scrub cycle that the device is capable of. In addition, the patrol
scrub controls allow the host to disable and enable the feature in case
disabling of the feature is needed for other purposes such as
performance-aware operations which require the background operations to be
turned off.
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Link: https://lore.kernel.org/r/20240223085902.1549-3-shiju.jose@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705123039.963781-4-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
CXL spec 3.1 section 8.2.9.6 describes optional device specific features.
CXL devices supports features with changeable attributes.
Get Supported Features retrieves the list of supported device specific
features. The settings of a feature can be retrieved using Get Feature and
optionally modified using Set Feature.
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Link: https://lore.kernel.org/r/20240223085902.1549-2-shiju.jose@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705123039.963781-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Preparation for allowing devices to define their own CCI commands
Signed-off-by: Gregory Price <gregory.price@memverge.com>
Link: https://lore.kernel.org/r/20230906001517.324380-2-gregory.price@memverge.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705123039.963781-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Iterate over the list keeping the output payload size into account,
returning the results from a previous scan media operation. The
scan media operation does not fail prematurely due to device being
out of storage, so this implementation does not deal with the
retry/restart functionality.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20230908073152.4386-5-dave@stgolabs.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705120643.959422-5-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Per CXL r3.1 Section 8.2.9.9.5.1: Sanitize (Opcode 4400h), the
sanitize command should delete all event logs. Introduce
cxl_discard_all_event_logs() and call
this in __do_sanitization().
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20231222090051.3265307-5-42.hyeyoo@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705120643.959422-4-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The spec states that reads/writes should have no effect and a part of
commands should be ignored when the media is disabled, not when the
sanitize command is running.
Introduce cxl_dev_media_disabled() to check if the media is disabled and
replace sanitize_running() with it.
Make sure that the media has been correctly disabled during sanitation
by adding an assert to __toggle_media(). Now, enabling when already
enabled or vice versa results in an assert() failure.
Suggested-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Link: https://lore.kernel.org/r/20231222090051.3265307-4-42.hyeyoo@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705120643.959422-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use simple heuristics to determine the cost of scanning any given
chunk, assuming cost is equal across the whole device, without
differentiating between volatile or persistent partitions. This
is aligned to the fact that these constraints are not enforced
in respective poison query commands.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20230908073152.4386-3-dave@stgolabs.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705120643.959422-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
According to the datasheet of ASPEED SOCs,
each I2C bus has their own pool buffer since AST2500.
Only AST2400 utilized a pool buffer share to all I2C bus.
And firmware required to set the offset of pool buffer
by writing "Function Control Register(I2CD 00)"
To make this model more readable, will change to introduce
a new bus pool buffer attribute in AspeedI2Cbus.
So, it does not need to calculate the pool buffer offset
for different I2C bus.
This patch rename the I2C class pool attribute to share_pool.
It make user more understand share pool and bus pool
are different.
Incrementing the version of aspeed_i2c_vmstate to 3.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
According to the datasheet of ASPEED SOCs,
an I2C controller owns 8KB of register space for AST2700,
owns 4KB of register space for AST2600, AST2500 and AST2400,
and owns 64KB of register space for AST1030.
It set the memory region size 4KB by default and it does not compatible
register space for AST2700.
Introduce a new class attribute to set the I2C controller memory size
for different ASPEED SOCs.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
AST2700 and AST2600 ADC controllers are identical.
Introduce ast2700 class and set 2 engines.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Report support on the AST2600 SoC if the boot-from-eMMC HW strapping
bit is set at the board level. AST2700 also has support but it is not
yet ready in QEMU and others SoCs do not have support, so return false
always for these.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Bit SCU500[2] of the AST2600 controls the boot device of the SoC.
Future changes will configure this bit to boot from eMMC disk images
specially built for this purpose.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
