Add more commands and their names, and remove SEEK(6) which is obsolete.
Instead, use SET_CAPACITY which is still in SSC.
Tested-by: Thomas Schmitt <scdbackup@gmx.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Mode page 2A of emulated ATAPI DVD-ROM should have page length 0x14
like SCSI CD-ROM, rather than 0x12.
Mode page length is off by 8, as it should contain the length of the
payload after the first two bytes.
MODE SENSE(6) should be thrown out of ATAPI DVD-ROM emulation. It is
not specified in the ATAPI list of MMC-2, and MMC-5 prescribes to use
MODE SENSE(10). Anyway, its implementation is wrong.
Reported-by: Thomas Schmitt <scdbackup@gmx.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Old operating systems rely on correct geometry to convert from CHS
addresses to LBA. Providing correct data is necessary for them to boot.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The pre-1.0 firmware path for SCSI devices already included the LUN
using the suffix argument to add_boot_device_path. I missed that when
making channel and LUN customizable. Avoid that it is included twice, and
convert the colons to commas for consistency with other kinds of devices
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This bug was detected by codespell.
In mips_mipssim.c a grammatical error was fixed, too.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
The default is still 3, and I didn't change older machine types.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Fix a long-standing bug which meant that any attempt to do an
8 or 16 bit read from the OMAP GPIO module would cause qemu to
crash due to an infinite recursion.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When running the s390x virtio machine we can potentially use uninitialized
memory for the virtio device backing ram. That can lead to weird breakge.
So let's better initialize it to 0 properly.
Reported-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
---
v1 -> v2:
- use target_phys_addr_t
On s390 a shutdown is the state of all CPUs being either stopped
or disabled (for interrupts) waiting. We have to track the overall
number of running CPUs to call the shutdown sequence accordingly.
This patch implements the counting and shutdown handling for the
kvm path in qemu.
Lets also wrap changes to env->halted and env->exception_index.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The default kernel command line for s390 is
"root=/dev/ram0 ro"
When overriding this line, we have to ensure to also copy the \0 to
avoid false lines, for example, -append "root=/dev/vda" will result in
"root=/dev/vda0 ro" with the current code.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
also gracefully fail on nand_device_init() for unsupported block
size instead of aborting.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Depending on the considered baseboard the bit used to
reset the platform is different.
Here is the list of considered Realview/Versatile platforms:
Realview/Versatile AB for ARM926EJ-S: BOARD_ID = 0x100 = BOARD_ID_PB9
http://infocenter.arm.com/help/topic/com.arm.doc.dui0225d/CACCIFGI.html
RealView Emulation Baseboard: BOARD_ID = 0x140 = BOARD_ID_EB
No reset register
RealView PB for Cortex-A8: BOARD_ID = 0x178 = BOARD_ID_PBA8
http://infocenter.arm.com/help/topic/com.arm.doc.dui0417d/BBACIGAD.html
RealView PB for Cortex-A9: BOARD_ID = 0x182 = BOARD_ID_PBX
http://infocenter.arm.com/help/topic/com.arm.doc.dui0440b/CACCHBFB.html
Motherboard Express =C2=B5ATX: BOARD_ID = 0x190 = BOARD_ID_VEXPRESS
No reset register
Signed-off-by: Jean-Christophe DUBOIS <jcd@tribudubois.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Fix an error in commit afd4a6522 which meant that writing a zero
to the RW bits in the PMCR wouldn't actually clear them. (Error
spotted by Andrzej Zaborowski.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
"!X == 2" is always false (spotted by Coverity), so the checks
for whether rndis is in the correct state would never fire.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
There are only three counter/timers on the integrator board:
correct the bounds check to avoid an array overrun. (Spotted
by Coverity, see bug 887883).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Fix a bug in handling the write-one-to-clear bits in the PMCR
which meant that we would always clear the bit even if the
value written was a zero. Spotted by Coverity (see bug 887883).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Remove a pointless comparison of an array to null. (There is
no need to check whether s->out[i] is non-null as qemu_set_irq
will do that for us.) Spotted by Coverity (see bug 887883).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Remove a check for g_malloc failing: this never happens.
Also use g_malloc rather than g_malloc0 as we immediately
memset the entire region and so zero-initialising it is pointless.
Spotted by Coverity (see bug 887883).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Avoid a crash due to null pointer dereference if a guest attempts
to access banked registers for a nonexistent bank. Spotted by
Coverity (see bug 887883).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Since we added PCI support to the pseries machine, we include a qlist of
PCI host bridges in the sPAPREnvironment structure. However this list
was never properly initialized it. Somehow we got away with this until
some other recent change broke it, and we now segfault immediately on
startup.
This patch adds the required QLIST_INIT(), and while we're at it makes sure
we initialize the rest of the sPAPREnvironment structure to 0, to avoid
future nasty surprises.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Fix a use-while-uninitialized of the fd_type[] array (introduced
in commit 34d4260e1, noticed by Coverity). This is more theoretical
than practical, since it's quite hard to get here with floppy==NULL
(the qdev_try_create() of the isa-fdc device has to fail).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a missing 'break' statement to fix a buffer overrun when
executing the EEPROM write-all command. Spotted by Coverity
(see bug 887883).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
hpet_timer timer callback rearms itself based on difference between
current HPET tick counter and comparator value. Difference calculated by
the hpet_calculate_diff function is limited to non-negative values.
cur_tick is calculated via hpet_get_ticks that uses qemu_get_clock_ns(vm_clock).
With -icount enabled vm_clock doesn't advance during qemu_run_timers
loop thus once difference is zero, qemu_run_timers loops forever
handling hpet_timer.
Limit hpet_calculate_diff results to positive only values to avoid that
infinite loop.
This fixes the following qemu-system-x86_64 hang when it reaches
timer_irq_works() in the linux bootup:
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1000.054 MHz processor.
[ 0.000031] Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.10 BogoMIPS (lpj=10000540)
[ 0.000404] pid_max: default: 32768 minimum: 301
[ 0.001138] Mount-cache hash table entries: 256
[ 0.003883] Initializing cgroup subsys ns
[ 0.004035] Initializing cgroup subsys cpuacct
[ 0.004280] Initializing cgroup subsys freezer
[ 0.004790] Performance Events: AMD PMU driver.
[ 0.004985] ... version: 0
[ 0.005134] ... bit width: 48
[ 0.005285] ... generic registers: 4
[ 0.005437] ... value mask: 0000ffffffffffff
[ 0.005625] ... max period: 00007fffffffffff
[ 0.005807] ... fixed-purpose events: 0
[ 0.005957] ... event mask: 000000000000000f
[ 0.006275] SMP alternatives: switching to UP code
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add missing 'break' statements which would have meant that writing
to an 8 bit NAND device was broken. Spotted by Coverity (see bug
887883).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Fix a bug revealed by a coverity scan (see bug 887883) which meant
that we would never print the warning about unpredictable behaviour
if a nonexistent overlay is enabled.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Modern distributions place xattr.h in /usr/include/sys, and fold
libattr.so into libc. They also don't have an ENOATTR.
Make configure detect this, and add a qemu-xattr.h file that
directs the #include to the right place.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit 0a039dc700 broke vga modes for
qxl-vga by loosing vga_ioport_read windup. qxl needs to hook into
vga port writes only and used to realize that by letting vga_init() do
the work for both reads and writes, then overwrite the write function.
That little detail was missed while doing the conversion ...
This patch fixes it. It also switch qxl vga ioport registration to
portio lists while being at it.
Cc: Hans de Goede <hdegoede@redhat.com>
Acked-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch removes the code lines which set the subsystem id for the
emulated ac97 card to 8086:0000. Due to the device id being zero the
subsystem id isn't vaild anyway. With the patch applied the sound card
gets the default qemu subsystem id (1af4:1100) instead.
[ v2: old & broken id is maintained for -M pc-$oldqemuversion ]
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
sgabios hasn't gotten a lot of coverage since it was not shipped. For 1.0,
let's disable the automatic loading of the option ROM in -nographic
mode. We can put it back for 1.1.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Somehow, the read/write functions handle an offset that does not exist anymore.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
The first enable set/clear register (which controls the PPIs and SGIs)
is supposed to be banked for each processor. Currently it is just
handled globally and this prevents recent SMP Linux kernels from
booting, because CPU0 stops receiving localtimer interrupts when CPU1
disables them locally.
To fix this, allow the enable bits to be enabled per-cpu. For SPIs,
always enable/disable ALL_CPU_MASK.
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With the conversion of the block layer to coroutines, bdrv_read/write
have changed to run a nested event loop that calls qemu_bh_poll.
Consequently a scheduled BH can be called while a DMA transfer handler
runs and this means that DMA_run becomes reentrant.
Devices haven't been designed to cope with that, so instead of running a
nested transfer handler just wait for the next invocation of the BH from the
main loop.
This fixes some problems with the floppy device.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* 'xtensa' of git://jcmvbkbc.spb.ru/dumb/qemu-xtensa:
xtensa_lx60: fix build date code and change memory region names
xtensa_lx60: pass kernel arguments from -append
xtensa_lx60: add FLASH support
target-xtensa: raise an exception for invalid and reserved opcodes
target-xtensa: handle cache options in the overlay tool
target-xtensa: mask out undefined bits of WINDOWSTART SR
apic id returned to guest kernel in ebx for cpuid(function=1) depends on
CPUX86State->cpuid_apic_id which gets populated after the cpuid information
is cached in the host kernel. This results in broken CPU topology in guest.
Fix this by setting cpuid_apic_id before cpuid information is passed to
the host kernel. This is done by moving the setting of cpuid_apic_id
to cpu_x86_init() where it will work for both KVM as well as TCG modes.
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Bharata B Rao <bharata.rao@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
commit ba43d28916 introduces a bug:
The stream-not-found case doesn't error out any more, instead the
code silently uses the first stream. Fix it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When SCSI passthrough is being used by the guest with virtio-blk, the
guest is not able to detect disk failures. This is because the status
field is expected by the guest driver to include also the msg_status,
host_status and driver_status fields, but the device is only passing
down the SCSI status.
The patch fixes this, and also makes sure that the guest always sees a
CHECK_CONDITION status when there is valid sense data.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Markus Armbruster <armbru@redhat.com> sent fixes for va_list vararg
issues in v9fs_string_alloc_printf(). It turns out the function
duplicates g_vasprintf() and can therefore be eliminated entirely.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Fix date code to uses MMDDYYYY notation.
Change memory region names to reflect specification that defines them.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
