Timofey Titovets 2e0d746172 ldc1612: trigger error on high frequency ... If the sensor coil is disconnected, the frequency is equal to the reference. If the sensor is misconfigured or damaged, the coil frequency is greater than 1/4 of the reference frequency. Signed-off-by: Timofey Titovets <nefelim4ag@gmail.com>		2026-01-08 12:00:45 -05:00
..
ar100	ar100: Convert to or1k-elf toolchain	2025-06-08 14:15:50 -04:00
atsam	stepper: Support step on both edges with custom minimum pulse duration	2025-03-20 19:56:55 -04:00
atsamd	atsamd: Fix possible buffer overflow in usbserial.c	2025-12-17 10:18:39 -05:00
avr	avr: add lgt8f328p support	2025-12-30 21:51:15 -05:00
generic	armcm_timer: Use a static instruction count for TIMER_MIN_TRY_TICKS	2025-12-03 17:47:50 -05:00
hc32f460	Kconfig: Note which chips require software divide operations	2025-04-17 12:09:19 -04:00
linux	sched: Improve timer vs task priority check	2024-10-26 22:09:14 -04:00
lpc176x	Kconfig: Add new WANT_ADC option to reduce code size	2025-04-16 13:54:44 -04:00
pru	Revert "Makefile: Don't disable gcc's use-linker-plugin option"	2025-04-16 15:24:05 -04:00
rp2040	rp2040: Add support for ADC on rp2350b chips	2025-12-18 20:56:13 -05:00
simulator	command: Fix handling of buffer passing in args[] on 64bit mcu	2020-10-30 14:04:12 -04:00
stm32	stm32: Improve accuracy of hardware pwm cycle time	2026-01-06 21:53:29 -05:00
adccmds.c	adccmds: Run gpio_adc_setup() before oid_alloc()	2019-01-13 11:03:30 -05:00
basecmd.c	basecmd: Update stats timing check to support 32bit duration	2025-04-28 19:28:52 -04:00
basecmd.h	stepper: Use a reusable interface to the "move queue"	2020-12-04 16:10:13 -05:00
buttons.c	buttons: initialize mcu buttons based on inverted state	2019-07-05 20:01:07 -04:00
byteorder.h	byteorder: Add a header file defining common byteswap functions	2018-05-21 09:44:40 -04:00
command.c	command: Support 2-byte message ids	2024-06-10 12:27:12 -04:00
command.h	command: Support 2-byte message ids	2024-06-10 12:27:12 -04:00
compiler.h	compiler.h: Check if __aligned and __section macros are already defined	2016-06-13 23:18:59 -04:00
ctr.h	ctr: Encode negative integers in normal hex notation	2019-08-22 13:06:44 -04:00
debugcmds.c	debugcmds: Remove start/end_group commands	2021-05-07 13:53:47 -04:00
endstop.c	trsync: Introduce new "trigger synchronization" support	2021-06-09 18:58:35 -04:00
gpiocmds.c	gpiocmds: Merge digital output and soft pwm code	2020-12-10 12:06:26 -05:00
i2c_software.c	i2c_software: Place wires in high impedance state after setup	2025-07-22 14:04:50 -04:00
i2c_software.h	i2c: handle errors at i2ccmds	2024-10-26 22:06:30 -04:00
i2ccmds.c	i2ccmds: move status checks to function	2024-10-26 22:06:30 -04:00
i2ccmds.h	ldc1612: shutdown on i2c errors	2024-10-26 22:06:30 -04:00
initial_pins.c	initial_pins: Add check to reduce compile time size when not in use	2022-12-16 22:46:47 -05:00
initial_pins.h	initial_pins: Add ability to configure output pins at mcu startup	2019-03-17 20:56:25 -04:00
Kconfig	load_cell_probe: Create load_cell_probe MCU object	2025-05-29 19:06:48 -04:00
lcd_hd44780.c	lcd_hd44780: Make sure nsecs_to_ticks() is always inlined	2025-04-17 12:09:19 -04:00
lcd_st7920.c	lcd_st7920: Make sure nsecs_to_ticks() is always inlined	2025-04-17 12:09:19 -04:00
load_cell_probe.c	load_cell_probe: Fix warnings on avr builds	2025-06-18 11:09:58 -04:00
load_cell_probe.h	load_cell_probe: Create load_cell_probe MCU object	2025-05-29 19:06:48 -04:00
Makefile	load_cell_probe: Create load_cell_probe MCU object	2025-05-29 19:06:48 -04:00
neopixel.c	neopixel: Increase PULSE_LONG_TICKS to 800 for compatibility	2025-11-13 15:15:28 -05:00
pulse_counter.c	pulse_counter: Use "clock" suffix instead of "time" in commands	2021-04-30 11:40:37 -04:00
pwmcmds.c	pwmcmds: Use move queue for hard PWM	2020-12-04 16:10:13 -05:00
sched.c	sched: Improve timer vs task priority check	2024-10-26 22:09:14 -04:00
sched.h	sched: Improve timer vs task priority check	2024-10-26 22:09:14 -04:00
sdiocmds.c	stm32: Add sdio support	2023-02-20 19:55:25 -05:00
sdiocmds.h	stm32: Add sdio support	2023-02-20 19:55:25 -05:00
sensor_ads1220.c	sensor_hx71x: Update Sensors to report to load_cell_probe	2025-05-29 19:07:49 -04:00
sensor_adxl345.c	sensor_adxl345: No need to schedule start of bulk reading	2024-01-19 11:55:15 -05:00
sensor_angle.c	angle: mt6826s added support	2024-12-12 14:28:45 -05:00
sensor_bulk.c	sensor_bulk: New C file with helper code for sending bulk sensor measurements	2024-01-19 11:55:15 -05:00
sensor_bulk.h	sensor_bulk: Change maximum data size from 52 to 51 bytes	2024-06-10 12:27:12 -04:00
sensor_hx71x.c	sensor_hx71x: Update Sensors to report to load_cell_probe	2025-05-29 19:07:49 -04:00
sensor_icm20948.c	icm20948: Add support for ICM20948 accelerometer (#6756)	2025-03-04 17:12:26 -05:00
sensor_ldc1612.c	ldc1612: trigger error on high frequency	2026-01-08 12:00:45 -05:00
sensor_lis2dw.c	sensor_lis2dw: Read 8 samples at a time from sensor fifo	2025-10-13 20:36:11 -04:00
sensor_mpu9250.c	mpu: shutdown on i2c errors	2024-10-26 22:06:30 -04:00
sos_filter.c	sos_filter: fix overflows_int32 (#6976)	2025-07-11 11:08:35 -04:00
sos_filter.h	sos_filter: Second Order Sections MCU Filter	2025-05-29 19:01:38 -04:00
spi_software.c	spi_software: add a delay on mode change	2025-05-26 18:44:29 -04:00
spi_software.h	spi_software: Implementation of software spi	2019-02-13 11:52:20 -05:00
spicmds.c	Kconfig: Support selecting optional features on chips with small flash size	2023-06-08 12:59:30 -04:00
spicmds.h	sensor_angle: Add support for bulk querying of spi angle sensors	2022-03-29 20:34:46 -04:00
stepper.c	stepper: Minor code tweak - remove unneeded parenthesis	2025-05-09 12:58:01 -04:00
stepper.h	trsync: Introduce new "trigger synchronization" support	2021-06-09 18:58:35 -04:00
thermocouple.c	thermocouple: Only shutdown on multiple consecutive sensor errors	2022-09-23 11:56:20 -04:00
tmcuart.c	command: Add command_decode_ptr() helper	2020-10-30 14:04:08 -04:00
trsync.c	trsync: Don't require callers of trsync_do_trigger() to disable irqs	2024-10-26 22:11:02 -04:00
trsync.h	trsync: Introduce new "trigger synchronization" support	2021-06-09 18:58:35 -04:00