3D-printing/klipper
1
0
Fork 0
mirror of https://github.com/Klipper3d/klipper.git synced 2025-12-24 08:38:34 -07:00
Code Issues Projects Releases Packages Wiki Activity Actions 4
klipper/klippy/extras
History
Exact
Kevin O'Connor e87de2ae49 motion_queuing: Don't disable step+dir+step filter in drip_update_time() 
Allow the step compress code to perform regular step+dir+step
filtering even during probing and homing actions.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2025-10-08 20:11:40 -04:00
..
display uc1701: allow non blocking i2c writes 2025-09-24 19:33:37 -04:00
__init__.py klippy: Add support for dynamic loading of python modules 2018-01-28 12:19:26 -05:00
ad5206.py extras: Use "from . import module" for relative imports 2020-06-15 17:15:53 -04:00
adc_scaled.py mcu: Rename setup_minmax() to setup_adc_sample() 2024-06-21 15:32:30 -04:00
adc_temperature.py adc_temperature: Enhance "ADC out of range" error reports 2024-06-21 15:32:30 -04:00
ads1x1x.py ads1x1x: Rename local 'config' variable to pcfg 2025-07-08 18:55:25 -04:00
ads1220.py sensor_hx71x: Update Sensors to report to load_cell_probe 2025-05-29 19:07:49 -04:00
adxl345.py adxl345: Allow read and write 127 register address 2025-04-03 14:08:23 -04:00
aht10.py aht10: update comments and docs for AHT20/AHT21 support 2023-04-24 11:10:00 -04:00
angle.py klippy: fix typos in python code (#6989) 2025-07-25 12:31:19 -04:00
axis_twist_compensation.py axis_twist_compensation: Fix AttributeError on klippy connect state (#6881) 2025-04-05 21:36:35 -04:00
bed_mesh.py klippy: fix typos in python code (#6989) 2025-07-25 12:31:19 -04:00
bed_screws.py bed_screws: Reset on move error 2023-11-02 13:08:53 -04:00
bed_tilt.py bed_tilt: Support toolhead positions with more than 4 axes 2025-05-12 20:15:03 -04:00
bltouch.py probe: Remove ProbeEndstopSessionHelper 2025-04-18 14:38:34 -04:00
bme280.py bme280: drop obsolete i2c_write_wait_ack 2025-08-22 16:44:54 -04:00
board_pins.py board_pins: Use config list helpers 2021-08-21 18:08:11 -04:00
bulk_sensor.py sensor_bulk: Change maximum data size from 52 to 51 bytes 2024-06-10 12:27:12 -04:00
bus.py bus: Additional devices require i2c_write_noack() 2025-10-06 21:19:01 -04:00
buttons.py buttons: fixes incorrect parameters 2025-03-21 13:36:27 -04:00
canbus_ids.py canbus_ids: Use 4 as the first nodeid to reduce id bitstuffing 2022-07-29 11:40:54 -04:00
canbus_stats.py usb_canbus: Detect canbus stalls when in usb to canbus bridge mode 2025-02-02 18:43:34 -05:00
controller_fan.py fan: Support calling set_speed() without a print_time 2024-09-30 12:23:24 -04:00
dac084S085.py dac084S085: SPI DAC DAC084S085 implementation (#5134) 2022-02-22 10:28:28 -05:00
delayed_gcode.py klippy: Rename try_load_module() to load_object() 2020-05-08 11:05:14 -04:00
delta_calibrate.py delta_calibrate: Fix Python3 error in DELTA_ANALYZE 2022-06-13 13:51:07 -04:00
display_status.py display_status: Implement SET_DISPLAY_TEXT command 2022-06-27 10:09:02 -04:00
dotstar.py led: Generalize template evaluation so it is not dependent on LEDs 2024-09-30 12:23:24 -04:00
ds18b20.py ds18b20: fix string conversion error on startup (#5559) 2022-06-08 18:05:27 -04:00
duplicate_pin_override.py duplicate_pin_override: Use config.getlist() for pins config option 2021-08-21 18:08:11 -04:00
endstop_phase.py kinematics: Generic Cartesian kinematics implementation (#6815) 2025-05-06 18:06:36 -04:00
error_mcu.py error_mcu: Support mechanism to add per-instance context to a shutdown 2024-06-21 15:32:30 -04:00
exclude_object.py exclude_object: Support toolhead positions with more than 4 axes 2025-05-12 20:15:03 -04:00
extruder_stepper.py extruder_stepper: define missing public methods methods 2025-09-04 14:20:25 -04:00
fan.py fan: Fix restart request handling 2024-10-01 11:43:27 -04:00
fan_generic.py fan_generic: Fix handling of template rendering errors 2025-03-25 18:45:12 -04:00
filament_motion_sensor.py buttons: Debounce gcode_button and filament_switch_sensor (#6848) 2025-03-20 19:55:33 -04:00
filament_switch_sensor.py buttons: Debounce gcode_button and filament_switch_sensor (#6848) 2025-03-20 19:55:33 -04:00
firmware_retraction.py klippy: fix typos in python code (#6989) 2025-07-25 12:31:19 -04:00
force_move.py motion_queuing: Move flushing logic from toolhead to motion_queuing module 2025-09-03 12:00:31 -04:00
garbage_collection.py garbage_collection: freeze objects on klippy ready (#6794) 2025-02-02 18:40:43 -05:00
gcode_arcs.py gcode_arc: merge coords gen & G1 emit 2024-08-12 13:06:28 -04:00
gcode_button.py buttons: Debounce gcode_button and filament_switch_sensor (#6848) 2025-03-20 19:55:33 -04:00
gcode_macro.py gcode_macro: more descriptive "unable to parse as a literal" error - display faulty command 2025-05-08 11:37:38 -04:00
gcode_move.py gcode_move: Fix M114 when extra axes are defined 2025-08-31 12:19:43 -04:00
hall_filament_width_sensor.py hall_filament_width_sensor: Add filament switch values to status 2025-04-17 11:44:26 -04:00
heater_bed.py heaters: Make sure set_temp() command wakes up the idle_timeout 2021-03-05 18:59:01 -05:00
heater_fan.py fan: Support calling set_speed() without a print_time 2024-09-30 12:23:24 -04:00
heater_generic.py klippy: Rename try_load_module() to load_object() 2020-05-08 11:05:14 -04:00
heaters.py heaters: Reduce next_pwm_time window 2025-08-21 09:25:42 -04:00
homing.py kinematics: Generic Cartesian kinematics implementation (#6815) 2025-05-06 18:06:36 -04:00
homing_heaters.py homing_heaters: Use config.getlist() for heaters and steppers config options 2021-08-21 18:08:11 -04:00
homing_override.py toolhead: Pass set_position() homing_axes parameter as a string 2025-01-21 18:58:23 -05:00
htu21d.py klippy: fix typos in python code (#6989) 2025-07-25 12:31:19 -04:00
hx71x.py sensor_hx71x: Update Sensors to report to load_cell_probe 2025-05-29 19:07:49 -04:00
icm20948.py icm20948: Formatting refactor 2025-04-03 14:08:23 -04:00
idle_timeout.py idle_timeout: Add status field for current idle timeout (#6982) 2025-08-01 12:37:47 -04:00
input_shaper.py input_shaper: Z-axis input shaper 2025-10-04 19:50:34 -04:00
ldc1612.py ldc_1612: Supports configurable external crystal frequency (#6734) 2025-03-29 21:53:52 -04:00
led.py led: Use mcu.min_schedule_time() and mcu.max_nominal_duration() 2025-04-28 19:28:52 -04:00
lis2dw.py lis2dw: if spi is used - disable i2c 2025-05-26 18:44:29 -04:00
lis3dh.py sensor_lis2dw: add lis3dh sensor and i2c communication 2024-11-12 19:50:48 -05:00
lm75.py lm75: round reported temps to 2 decimal places 2021-10-15 18:01:19 -04:00
load_cell.py klippy: fix typos in python code (#6989) 2025-07-25 12:31:19 -04:00
load_cell_probe.py load_cell_probe: Avoid peeking directly at config.section member variable 2025-05-29 19:17:45 -04:00
manual_probe.py generic_cartesian: Fixed safe_z_home and manual_probe for new kinematics 2025-05-10 20:16:00 -04:00
manual_stepper.py motion_queuing: Move flushing logic from toolhead to motion_queuing module 2025-09-03 12:00:31 -04:00
mcp4018.py mcp4018: Remove support for manual i2c - use standard mcu software i2c instead 2025-07-22 14:04:50 -04:00
mcp4451.py extras: Use "from . import module" for relative imports 2020-06-15 17:15:53 -04:00
mcp4728.py extras: Use "from . import module" for relative imports 2020-06-15 17:15:53 -04:00
motion_queuing.py motion_queuing: Don't disable step+dir+step filter in drip_update_time() 2025-10-08 20:11:40 -04:00
motion_report.py motion_report: Don't negate step_distance on steppers with inverted dir pin 2024-04-02 21:53:13 -04:00
mpu9250.py adxl345: Fix read_axes_map() for non-adxl345 accelerometers 2024-04-29 12:07:28 -04:00
multi_pin.py mcu: Remove support for set_pwm() cycle_time parameter 2024-01-23 20:04:03 -05:00
neopixel.py led: Generalize template evaluation so it is not dependent on LEDs 2024-09-30 12:23:24 -04:00
output_pin.py motion_queuing: Move flushing logic from toolhead to motion_queuing module 2025-09-03 12:00:31 -04:00
palette2.py klippy: fix typos in python code (#6989) 2025-07-25 12:31:19 -04:00
pause_resume.py pause_resume: Do not clobber default state name by accident (#5156) 2022-01-16 13:00:24 -05:00
pca9533.py bus: Additional devices require i2c_write_noack() 2025-10-06 21:19:01 -04:00
pca9632.py bus: Additional devices require i2c_write_noack() 2025-10-06 21:19:01 -04:00
pid_calibrate.py pid_calibrate: Fix PID_CALIBRATE command when used with heater_generic 2024-03-13 21:41:04 -04:00
print_stats.py print_stats: Fix for filament statistics bug in print_stats.py for toolchangers (#6946) 2025-05-31 13:06:44 -04:00
probe.py probe: Create ProbeVirtualEndstopDeprecation 2025-05-29 19:08:32 -04:00
probe_eddy_current.py probe_eddy_current: Separate probe style commands from homing operations 2025-04-18 14:38:34 -04:00
pulse_counter.py pulse_counter: Use "clock" suffix instead of "time" in commands 2021-04-30 11:40:37 -04:00
pwm_cycle_time.py pwm_cycle_time: Use mcu.min_schedule_time() and mcu.max_nominal_duration() 2025-04-28 19:28:52 -04:00
pwm_tool.py steppersync: Support sending messages directly from syncemitter 2025-09-24 15:07:25 -04:00
quad_gantry_level.py klippy: fix typos in python code (#6989) 2025-07-25 12:31:19 -04:00
query_adc.py query_adc: Use new GCodeCommand wrappers 2020-05-05 11:08:11 -04:00
query_endstops.py gcode_macro: Use deepcopy() on get_status() results 2021-01-20 16:25:25 -05:00
replicape.py configfile: Allow getchoice() to take a list 2024-06-17 13:49:05 -04:00
resonance_tester.py resonance_tester: Support testing resonances over Z axis 2025-10-04 19:50:34 -04:00
respond.py respond: No forced spaces (#5152) 2022-06-30 13:56:35 -04:00
safe_z_home.py safe_z_home: correct error call 2025-07-22 14:17:43 -04:00
samd_sercom.py samd_sercom: Specify the sercom explicitly in a config option 2021-07-04 09:48:45 -04:00
save_variables.py save_variables: Check lowercase variable names 2025-02-02 18:52:02 -05:00
screws_tilt_adjust.py docs: Note 'config' object shouldn't be accessed after initial load 2025-06-04 13:46:28 -04:00
sdcard_loop.py loop_sdcard: Add loopable SD card file sections 2021-05-26 11:57:57 -04:00
servo.py output_pin: Improve GCodeRequestQueue timing on duplicate requests 2024-09-16 13:31:14 -04:00
shaper_calibrate.py resonance_tester: Added a new sweeping_vibrations resonance test method (#6723) 2024-12-05 21:54:26 -05:00
shaper_defs.py input_shaper: Limit maximum damping_ratio of the shapers 2025-10-04 13:07:49 -04:00
sht3x.py sht3x: drop obsolete i2c_write_wait_ack 2025-08-22 16:44:54 -04:00
skew_correction.py skew_correction: Support toolhead positions with more than 4 axes 2025-05-12 20:15:03 -04:00
smart_effector.py klippy: fix typos in python code (#6989) 2025-07-25 12:31:19 -04:00
sos_filter.py klippy: fix typos in python code (#6989) 2025-07-25 12:31:19 -04:00
spi_temperature.py klippy: Replace deprecated logger.warn with logger.warning (#6385) 2023-11-16 22:06:13 -05:00
static_digital_output.py mcu: Remove support for "static" pins 2024-01-23 20:04:03 -05:00
statistics.py statistics: Avoid adding extra blank spaces on empty stats reports 2025-08-11 19:43:35 -04:00
stepper_enable.py stepper_enable: Improve timing of manual stepper enable/disable commands 2025-09-03 11:58:35 -04:00
sx1509.py bus: Additional devices require i2c_write_noack() 2025-10-06 21:19:01 -04:00
temperature_combined.py temperature_combined: avoid crash with temperature monitors 2025-04-05 21:27:37 -04:00
temperature_fan.py fan: Support calling set_speed() without a print_time 2024-09-30 12:23:24 -04:00
temperature_host.py temperature_host: Remove support for deprecated rpi_temperature alias 2021-11-02 12:45:11 -04:00
temperature_mcu.py temperature_mcu: Add support for rp2350 MCUs 2024-11-14 11:17:52 -05:00
temperature_probe.py temperature_probe: Fix python2 incompatibility 2025-08-31 16:02:44 -04:00
temperature_sensor.py temperature_sensor: round reported temps to 2 decimal places 2021-10-15 18:01:19 -04:00
temperature_sensors.cfg sht3x: Add sht31 support (#6560) 2024-04-20 18:42:31 -04:00
thermistor.py klippy: fix typos in python code (#6989) 2025-07-25 12:31:19 -04:00
tmc.py tmc.py: add track of stallguard 2025-07-12 16:17:22 -04:00
tmc2130.py tmc.py: add track of stallguard 2025-07-12 16:17:22 -04:00
tmc2208.py tmc: add missing freewheel config options 2025-04-17 11:42:44 -04:00
tmc2209.py tmc: add missing freewheel config options 2025-04-17 11:42:44 -04:00
tmc2240.py tmc2240: Add OTW_OV_VTH to FieldFormatters (#6987) 2025-08-21 09:33:31 -04:00
tmc2660.py tmc.py: add track of stallguard 2025-07-12 16:17:22 -04:00
tmc5160.py tmc5160: csactual -> cs_actual 2024-05-21 20:31:23 -04:00
tmc_uart.py tmc.py: add track of stallguard 2025-07-12 16:17:22 -04:00
tsl1401cl_filament_width_sensor.py mcu: Rename setup_minmax() to setup_adc_sample() 2024-06-21 15:32:30 -04:00
tuning_tower.py tuning_tower: add is_active() method 2022-06-03 14:12:04 -04:00
verify_heater.py docs: Move config reference information to new Config_Reference.md 2020-11-18 20:10:21 -05:00
virtual_sdcard.py virtual_sdcard: Define a default for on_gcode_error 2024-04-15 14:10:36 -04:00
z_thermal_adjust.py docs: Note 'config' object shouldn't be accessed after initial load 2025-06-04 13:46:28 -04:00
z_tilt.py stepper_enable: Unify explicit stepper enable/disable code 2025-09-03 11:57:58 -04:00