5ebb490a8d
* Create Patterns specific wiki * Fix typos in installation instructions Corrected the winget flag from --exact to -e and removed an extraneous backtick from the Mac xattr command in the README installation instructions. * Improve README formatting and clarity * Calibration Flow Ratio Yolo Archimedean cords Co-Authored-By: MxBrnr <142743732+MxBrnr@users.noreply.github.com> * redirection/tab.cpp section * Missing Frequent * remove auto-cooling * remove thumbnails * seam pointers * walls * infill * Image standarization * Fix broken internal links * Add reference note to Arachne wall generator docs * OrcaSlicer std * PrusaSlicer std * 2d-lateral xlsx * vertical patterns * Redirections fix * Update speed_settings_overhang_speed.md * Fix to action * FlowRate Co-Authored-By: MxBrnr <142743732+MxBrnr@users.noreply.github.com> * Top Bottom Shells * advanced strength * Action fix * Update How-to-wiki.md * Home.md icons and reorganize sections * Home Icons fix * Update cornering-calib.md * Update strength_settings_infill.md * Update Auxiliary-fan.md Co-Authored-By: Fisheye_3D <78997080+fisheye3d@users.noreply.github.com> * Add warning about wiki maintenance status
5.1 KiB
Calibration Guide
This guide offers a structured and comprehensive overview of the calibration process for OrcaSlicer.
It covers key aspects such as flow rate, pressure advance, temperature towers, retraction tests, and advanced calibration techniques. Each section includes step-by-step instructions and visuals to help you better understand and carry out each calibration effectively.
To access the calibration features, you can find them in the Calibration section of the OrcaSlicer interface.
Important
After completing the calibration process, remember to create a new project in order to exit the calibration mode.
The recommended order for calibration is as follows:
-
Temperature: Start by calibrating the temperature of the nozzle and the bed. This is crucial as it affects the viscosity of the filament, which in turn influences how well it flows through the nozzle and adheres to the print bed.
-
Flow: Calibrate the flow rate to ensure that the correct amount of filament is being extruded. This is important for achieving accurate dimensions and good layer adhesion.
-
Pressure Advance: Calibrate the pressure advance settings to improve print quality and reduce artifacts caused by pressure fluctuations in the nozzle.
-
Adaptive Pressure Advance: This is an advanced calibration technique that can be used to further optimize the pressure advance settings for different print speeds and geometries.
-
-
Retraction: Calibrate the retraction settings to minimize stringing and improve print quality. Doing this after Flow and Pressure Advance calibration is recommended, as it ensures that the printer is already set up for optimal extrusion.
-
Max Volumetric Speed: Calibrate the maximum volumetric speed of the filament. This is important for ensuring that the printer can handle the flow rate of the filament without causing issues such as under-extrusion or over-extrusion.
-
Cornering: Calibrate the Jerk/Junction Deviation settings to improve print quality and reduce artifacts caused by sharp corners and changes in direction.
-
Input Shaping: This is an advanced calibration technique that can be used to reduce ringing and improve print quality by compensating for mechanical vibrations in the printer.
-
VFA: A VFA speed test is available to find resonance speeds.
Tolerance: Calibrate the tolerances of your printer to ensure that it can accurately reproduce the dimensions of the model being printed. This is important for achieving a good fit between parts and for ensuring that the final print meets the desired specifications.
Credits:
- The Flow test and retraction test is inspired by SuperSlicer.
- The PA Line method is inspired by K-factor Calibration Pattern.
- The PA Tower method is inspired by Klipper.
- The temp tower model is remixed from Smart compact temperature calibration tower.
- The max flowrate test was inspired by Stefan (CNC Kitchen), and the model used in the test is a remix of his Extrusion Test Structure.
- ZV Input Shaping is inspired by Marlin Input Shaping and Ringing Tower 3D STL.