OrcaSlicer/src/slic3r/GUI/PrePrintChecker.cpp

#include "PrePrintChecker.hpp"
#include "GUI_Utils.hpp"
#include "I18N.hpp"
#include <set>


namespace Slic3r { namespace GUI {

std::string PrePrintChecker::get_print_status_info(PrintDialogStatus status)
{
    switch (status) {
    case PrintStatusInit: return "PrintStatusInit";
    case PrintStatusNoUserLogin: return "PrintStatusNoUserLogin";
    case PrintStatusInvalidPrinter: return "PrintStatusInvalidPrinter";
    case PrintStatusConnectingServer: return "PrintStatusConnectingServer";
    case PrintStatusReadingTimeout: return "PrintStatusReadingTimeout";
    case PrintStatusReading: return "PrintStatusReading";
    case PrintStatusInUpgrading: return "PrintStatusInUpgrading";
    case PrintStatusModeNotFDM: return "PrintStatusModeNotFDM";
    case PrintStatusInSystemPrinting: return "PrintStatusInSystemPrinting";
    case PrintStatusInPrinting: return "PrintStatusInPrinting";
    case PrintStatusNozzleMatchInvalid: return "PrintStatusNozzleMatchInvalid";
    case PrintStatusNozzleDataInvalid: return "PrintStatusNozzleDataInvalid";
    case PrintStatusNozzleDiameterMismatch: return "PrintStatusNozzleDiameterMismatch";
    case PrintStatusNozzleTypeMismatch: return "PrintStatusNozzleTypeMismatch";
    case PrintStatusRefreshingMachineList: return "PrintStatusRefreshingMachineList";
    case PrintStatusSending: return "PrintStatusSending";
    case PrintStatusLanModeNoSdcard: return "PrintStatusLanModeNoSdcard";
    case PrintStatusNoSdcard: return "PrintStatusNoSdcard";
    case PrintStatusLanModeSDcardNotAvailable: return "PrintStatusLanModeSDcardNotAvailable";
    case PrintStatusNeedForceUpgrading: return "PrintStatusNeedForceUpgrading";
    case PrintStatusNeedConsistencyUpgrading: return "PrintStatusNeedConsistencyUpgrading";
    case PrintStatusNotSupportedPrintAll: return "PrintStatusNotSupportedPrintAll";
    case PrintStatusBlankPlate: return "PrintStatusBlankPlate";
    case PrintStatusUnsupportedPrinter: return "PrintStatusUnsupportedPrinter";
    case PrintStatusInvalidMapping: return "PrintStatusInvalidMapping";
    // Handle filament errors
    case PrintStatusAmsOnSettingup: return "PrintStatusAmsOnSettingup";
    case PrintStatusAmsMappingInvalid: return "PrintStatusAmsMappingInvalid";
    case PrintStatusAmsMappingU0Invalid: return "PrintStatusAmsMappingU0Invalid";
    case PrintStatusAmsMappingMixInvalid: return "PrintStatusAmsMappingMixInvalid";
    case PrintStatusTPUUnsupportAutoCali: return "PrintStatusTPUUnsupportAutoCali";
    // Handle warnings
    case PrintStatusTimelapseNoSdcard: return "PrintStatusTimelapseNoSdcard";
    case PrintStatusTimelapseWarning: return "PrintStatusTimelapseWarning";
    case PrintStatusMixAmsAndVtSlotWarning: return "PrintStatusMixAmsAndVtSlotWarning";
    // Handle success statuses
    case PrintStatusReadingFinished: return "PrintStatusReadingFinished";
    case PrintStatusSendingCanceled: return "PrintStatusSendingCanceled";
    case PrintStatusAmsMappingSuccess: return "PrintStatusAmsMappingSuccess";
    case PrintStatusNotOnTheSameLAN: return "PrintStatusNotOnTheSameLAN";
    case PrintStatusNotSupportedSendToSDCard: return "PrintStatusNotSupportedSendToSDCard";
    case PrintStatusPublicInitFailed: return "PrintStatusPublicInitFailed";
    case PrintStatusPublicUploadFiled: return "PrintStatusPublicUploadFiled";
    case PrintStatusReadyToGo: return "PrintStatusReadyToGo";
    default: return "Unknown status";
    }
}

wxString PrePrintChecker::get_pre_state_msg(PrintDialogStatus status)
{
    switch (status) {
    case PrintStatusNoUserLogin: return _L("No login account, only printers in LAN mode are displayed");
    case PrintStatusConnectingServer: return _L("Connecting to server");
    case PrintStatusReading: return _L("Synchronizing device information");
    case PrintStatusReadingTimeout: return _L("Synchronizing device information time out");
    case PrintStatusModeNotFDM: return _L("Cannot send the print job when the printer is not at FDM mode");
    case PrintStatusInUpgrading: return _L("Cannot send the print job when the printer is updating firmware");
    case PrintStatusInSystemPrinting: return _L("The printer is executing instructions. Please restart printing after it ends");
    case PrintStatusInPrinting: return _L("The printer is busy on other print job");
    case PrintStatusAmsOnSettingup: return _L("AMS is setting up. Please try again later.");
    case PrintStatusAmsMappingMixInvalid: return _L("Please do not mix-use the Ext with AMS");
    case PrintStatusNozzleDataInvalid: return _L("Invalid nozzle information, please refresh or manually set nozzle information.");
    case PrintStatusLanModeNoSdcard: return _L("Storage needs to be inserted before printing via LAN.");
    case PrintStatusLanModeSDcardNotAvailable: return _L("Storage is in abnormal state or is in read-only mode.");
    case PrintStatusNoSdcard: return _L("Storage needs to be inserted before printing.");
    case PrintStatusNeedForceUpgrading: return _L("Cannot send the print job to a printer whose firmware is required to get updated.");
    case PrintStatusNeedConsistencyUpgrading: return _L("Cannot send the print job to a printer whose firmware is required to get updated.");
    case PrintStatusBlankPlate: return _L("Cannot send the print job for empty plate");
    case PrintStatusTimelapseNoSdcard: return _L("Storage needs to be inserted to record timelapse.");
    case PrintStatusMixAmsAndVtSlotWarning: return _L("You have selected both external and AMS filaments for an extruder. You will need to manually switch the external filament during printing.");
    case PrintStatusTPUUnsupportAutoCali: return _L("TPU 90A/TPU 85A is too soft and does not support automatic Flow Dynamics calibration.");
    case PrintStatusWarningKvalueNotUsed: return _L("Set dynamic flow calibration to 'OFF' to enable custom dynamic flow value.");
    case PrintStatusNotSupportedPrintAll: return _L("This printer does not support printing all plates");
    case PrintStatusWarningTpuRightColdPulling: return _L("Please cold pull before printing TPU to avoid clogging. You may use cold pull maintenance on the printer.");
    case PrintStatusFilamentWarningHighChamberTempCloseDoor: return _L("High chamber temperature is required. Please close the door.");
    }
    return wxEmptyString;
}

void PrePrintChecker::clear()
{
    printerList.clear();
    filamentList.clear();
}

void PrePrintChecker::add(PrintDialogStatus state, wxString msg, wxString tip, const wxString& wiki_url)
{
    prePrintInfo info;

    if (is_error(state)) {
        info.level = prePrintInfoLevel::Error;
    } else if (is_warning(state)) {
        info.level = prePrintInfoLevel::Warning;
    } else {
        info.level = prePrintInfoLevel::Normal;
    }

    if (is_error_printer(state)) {
        info.type = prePrintInfoType::Printer;
    } else if (is_error_filament(state)) {
        info.type = prePrintInfoType::Filament;
    } else if (is_warning_printer(state)) {
        info.type = prePrintInfoType::Printer;
    } else if (is_warning_filament(state)) {
        info.type = prePrintInfoType::Filament;
    }

    if (!msg.IsEmpty()) {
        info.msg  = msg;
        info.tips = tip;
    } else {
        info.msg  = get_pre_state_msg(state);
        info.tips = wxEmptyString;
    }

    info.wiki_url = wiki_url;

    switch (info.type) {
    case prePrintInfoType::Filament:
        if (std::find(filamentList.begin(), filamentList.end(), info) == filamentList.end()) {
            filamentList.push_back(info);
        }
        break;
    case prePrintInfoType::Printer:
        if (std::find(printerList.begin(), printerList.end(), info) == printerList.end()) {
            printerList.push_back(info);
        }
        break;
    default: break;
    }
}


//void PrePrintMsgBoard::add(const wxString &msg, const wxString &tips, bool is_error)
//{
//    if (msg.IsEmpty()) { return; }
//
//    /*message*/
//    // create label
//    if (!m_sizer->IsEmpty()) { m_sizer->AddSpacer(FromDIP(10)); }
//    Label *msg_label = new Label(this, wxEmptyString);
//    m_sizer->Add(msg_label, 0, wxLEFT, 0);
//
//    // set message
//    msg_label->SetLabel(msg);
//    msg_label->SetMinSize(wxSize(FromDIP(420), -1));
//    msg_label->SetMaxSize(wxSize(FromDIP(420), -1));
//    msg_label->Wrap(FromDIP(420));
//
//    // font color
//    auto colour = is_error ? wxColour("#D01B1B") : wxColour(0xFF, 0x6F, 0x00);
//    msg_label->SetForegroundColour(colour);
//
//    /*tips*/
//    if (!tips.IsEmpty()) { /*Not supported yet*/
//    }
//
//    Layout();
//    Fit();
//}

PrinterMsgPanel::PrinterMsgPanel(wxWindow *parent)
    : wxPanel(parent)
{
    m_sizer = new wxBoxSizer(wxVERTICAL);
    this->SetSizer(m_sizer);
}

static wxColour _GetLabelColour(const prePrintInfo& info)
{
    if (info.level == Error)
    {
        return wxColour("#D01B1B");
    }
    else if (info.level == Warning)
    {
        return wxColour("#FF6F00");
    }

    return *wxBLACK; // Default colour for normal messages
}

bool PrinterMsgPanel::UpdateInfos(const std::vector<prePrintInfo>& infos)
{
    if (m_infos == infos)
    {
        return false;
    }
    m_infos = infos;

    m_sizer->Clear(true);
    for (const prePrintInfo& info : infos)
    {
        if (!info.msg.empty())
        {
            Label* label = new Label(this);
            label->SetFont(::Label::Body_13);
            label->SetForegroundColour(_GetLabelColour(info));


            if (info.wiki_url.empty())
            {
                label->SetLabel(info.msg);
            }
            else
            {
                label->SetLabel(info.msg + " " + _L("Please refer to Wiki before use->"));
                label->Bind(wxEVT_ENTER_WINDOW, [this](auto& e) { SetCursor(wxCURSOR_HAND); });
                label->Bind(wxEVT_LEAVE_WINDOW, [this](auto& e) { SetCursor(wxCURSOR_ARROW); });
                label->Bind(wxEVT_LEFT_DOWN, [info](wxMouseEvent& event) { wxLaunchDefaultBrowser(info.wiki_url); });
            }

            label->Wrap(this->GetMinSize().GetWidth());
            label->Show();
            m_sizer->Add(label, 0, wxBOTTOM, FromDIP(4));
        }
    }

    this->Show();
    this->Layout();

    Fit();

    return true;
}


}
};