3D-printing/OrcaSlicer
1
0
Fork 0
mirror of https://github.com/SoftFever/OrcaSlicer.git synced 2025-07-21 21:58:03 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions 3
OrcaSlicer/doc/print_settings/support/support_settings_advanced.md
Ian Bassi eba08bf727
Some checks failed
Build all / Build All (push) Has been cancelled
Details
Build all / Flatpak (push) Has been cancelled
Details
Publish docs to Wiki / Publish docs to Wiki (push) Has been cancelled
Details
Wiki Update 7 (#10007) 
* Large images optimizations

* Add image and update instructions for junction deviation

Added a new image illustrating the printer jerk limitation setting and updated the calibration documentation to clarify steps for setting Maximum Junction Deviation. Improved formatting and corrected a typo in the instructions.

* Update README links to Wiki

* Fix Wiki image paths + Typos

* Fixes, typos and Infill improvements

* Update VFA calibration guide and add resonance avoidance

Expanded the VFA calibration documentation with more detailed explanations of VFA causes, the VFA Speed Test, and how to use the Resonance Avoidance Speed Range. Added a new image illustrating the resonance avoidance configuration.

* Add surface density setting to top/bottom shells docs

* Ironing Wiki Wip

* Wall and surfaces wiki wip

* Fix top/bottom link

* Better topbottom reddirect

* bridging wiki wip

* Fix TOP bottom

* Wall wiki wip

* strength advanced wiki wip

* speed advance renaming

* inital speed wiki wip

* Other Layer Speed Wiki Wip...

* Speed overhang Wiki WIP

* Travel speed wiki wip

* Speed acceleration wiki wip

* Update speed_settings_initial_layer_speed.md

* Jerk Wiki Wip

* support wiki wip

* Raft wiki wip

* support filamnet wiki wip

* Support ironing wiki wip

* Support advanced Wiki Wip

* Tree wiki wip

* STL images optimizations

* Prime tower wiki wip

* Update PA line diagram images

Were bigger than original used to crop this ones.

* Ooze wiki wip

* Flush wiki wip

* Image optimizatios

* Clarify TPMS-D infill description

Updated the TPMS-D infill section to specify that it refers to the Schwarz Diamond surface, improving clarity for users. Also updated the infill calculator spreadsheet.

Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com>

* images+++

* Multimaterial advanced Wiki Wip

* Skirt Wiki Wip

* Brim wiki wip

* Add Junction Deviation formula to documentation

Included the mathematical formula for Junction Deviation in the cornering calibration documentation to clarify its calculation.

Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com>

* Others special mode Wiki Wip

Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com>

* Fix links

* Fill Multiline infill Wiki

Introduced a new section in the infill documentation describing the Fill Multiline setting, its differences from other slicers, and its use cases. Added a comparison table and illustrative GIF to clarify how OrcaSlicer maintains density and material usage when using multiple infill lines.

* Multiline infill wiki update

Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com>

* Multiline Tab.cpp

* Gcode output Wiki Wip

* Others wiki wips

* Home quality

* Add process links in home

* Quality Basic Missing descriptions

* Update quality_settings_bridging.md

* basic desc

* basic advance strentgth

* Basic speed

* basic other speeds

* Fix link

* Update speed_settings_overhang_speed.md

* Update speed_settings_travel.md

* Update speed_settings_acceleration.md

* Fix

* Expand documentation for acceleration and jerk settings

* Support wiki

* Raft wiki

* Support wiki desc

* Prime tower wiki

* Multimaterial wiki desc

* Filament to features wiki

* Ooze improve

* Fix duplicate text

* Fix typo in volumetric speed calibration guide

Corrected 'promoted' to 'prompted' in the instructions for entering test settings in the volumetric speed calibration documentation.

* centeres image

* Overlapping gif

* Others wiki basic desc

* Clarify retraction calibration recommendation

Expanded the explanation for calibrating retraction settings, specifying that it should be done after Flow and Pressure Advance calibration for optimal extrusion setup.

Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com>

* Links in Readme + minor change

Refined links and formatting in README for better navigation. Expanded wall printing order section in quality settings documentation to clarify Inner/Outer, Inner/Outer/Inner, and Outer/Inner modes. Updated calibration guide images and formatting for improved clarity.

* Add SVG icons to infill pattern comparison table

* Delete doc/images/gui directory

remplaced with GUI

* Create process-preset-full.png

---------

Co-authored-by: Rodrigo <162915171+RF47@users.noreply.github.com>
2025-07-08 08:53:53 +08:00

1.8 KiB
Raw Blame History

Support Advanced

Z distance

The Z gap between support interface and object.

Support wall loops

This setting specifies the count of support walls in the range of [0,2]. 0 means auto.

Base Pattern

Line pattern for the base of the support.

Base pattern spacing

Spacing between support lines.

Pattern angle

Use this setting to rotate the support pattern on the horizontal plane.

Interface layers

The number of interface layers.

Interface pattern

The pattern used for the support interface.

Interface spacing

Spacing of interface lines. Zero means solid interface.

Normal support expansion

Expand (+) or shrink (-) the horizontal span of normal support.

Support/object XY distance

XY separation between an object and its support.

Support/object first layer gap

XY separation between an object and its support at the first layer.

Don't support bridges

Don't support the whole bridge area which make support very large. Bridges can usually be printed directly without support if not very long.

Independent support layer height

Support layer uses layer height independent with object layer. This is to support customizing z-gap and save print time. This option will be invalid when the prime tower is enabled.