mirror of
https://github.com/SoftFever/OrcaSlicer.git
synced 2025-08-06 13:34:05 -06:00
eba08bf727
* Large images optimizations * Add image and update instructions for junction deviation Added a new image illustrating the printer jerk limitation setting and updated the calibration documentation to clarify steps for setting Maximum Junction Deviation. Improved formatting and corrected a typo in the instructions. * Update README links to Wiki * Fix Wiki image paths + Typos * Fixes, typos and Infill improvements * Update VFA calibration guide and add resonance avoidance Expanded the VFA calibration documentation with more detailed explanations of VFA causes, the VFA Speed Test, and how to use the Resonance Avoidance Speed Range. Added a new image illustrating the resonance avoidance configuration. * Add surface density setting to top/bottom shells docs * Ironing Wiki Wip * Wall and surfaces wiki wip * Fix top/bottom link * Better topbottom reddirect * bridging wiki wip * Fix TOP bottom * Wall wiki wip * strength advanced wiki wip * speed advance renaming * inital speed wiki wip * Other Layer Speed Wiki Wip... * Speed overhang Wiki WIP * Travel speed wiki wip * Speed acceleration wiki wip * Update speed_settings_initial_layer_speed.md * Jerk Wiki Wip * support wiki wip * Raft wiki wip * support filamnet wiki wip * Support ironing wiki wip * Support advanced Wiki Wip * Tree wiki wip * STL images optimizations * Prime tower wiki wip * Update PA line diagram images Were bigger than original used to crop this ones. * Ooze wiki wip * Flush wiki wip * Image optimizatios * Clarify TPMS-D infill description Updated the TPMS-D infill section to specify that it refers to the Schwarz Diamond surface, improving clarity for users. Also updated the infill calculator spreadsheet. Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com> * images+++ * Multimaterial advanced Wiki Wip * Skirt Wiki Wip * Brim wiki wip * Add Junction Deviation formula to documentation Included the mathematical formula for Junction Deviation in the cornering calibration documentation to clarify its calculation. Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com> * Others special mode Wiki Wip Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com> * Fix links * Fill Multiline infill Wiki Introduced a new section in the infill documentation describing the Fill Multiline setting, its differences from other slicers, and its use cases. Added a comparison table and illustrative GIF to clarify how OrcaSlicer maintains density and material usage when using multiple infill lines. * Multiline infill wiki update Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com> * Multiline Tab.cpp * Gcode output Wiki Wip * Others wiki wips * Home quality * Add process links in home * Quality Basic Missing descriptions * Update quality_settings_bridging.md * basic desc * basic advance strentgth * Basic speed * basic other speeds * Fix link * Update speed_settings_overhang_speed.md * Update speed_settings_travel.md * Update speed_settings_acceleration.md * Fix * Expand documentation for acceleration and jerk settings * Support wiki * Raft wiki * Support wiki desc * Prime tower wiki * Multimaterial wiki desc * Filament to features wiki * Ooze improve * Fix duplicate text * Fix typo in volumetric speed calibration guide Corrected 'promoted' to 'prompted' in the instructions for entering test settings in the volumetric speed calibration documentation. * centeres image * Overlapping gif * Others wiki basic desc * Clarify retraction calibration recommendation Expanded the explanation for calibrating retraction settings, specifying that it should be done after Flow and Pressure Advance calibration for optimal extrusion setup. Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com> * Links in Readme + minor change Refined links and formatting in README for better navigation. Expanded wall printing order section in quality settings documentation to clarify Inner/Outer, Inner/Outer/Inner, and Outer/Inner modes. Updated calibration guide images and formatting for improved clarity. * Add SVG icons to infill pattern comparison table * Delete doc/images/gui directory remplaced with GUI * Create process-preset-full.png --------- Co-authored-by: Rodrigo <162915171+RF47@users.noreply.github.com>
2.4 KiB
2.4 KiB
Top and Bottom Shells
Controls how the top and bottom solid layers (shells) are generated in the print.
Shells Layers
This is the number of solid layers of shell, including the surface layer. When the thickness calculated by this value is thinner than shell thickness, the shell layers will be increased.
Shell Thickness
The number of solid layers is increased when slicing if the thickness calculated by shell layers is thinner than this value. This can avoid having too thin shell when layer height is small. 0 means that this setting is disabled and thickness of shell is absolutely determined by shell layers.
Surface Density
This setting controls the density of the top and bottom surfaces. A value of 100% means a solid surface, while lower values create a sparse surface. This can be used for esthetic purposes, gripping or making interfaces with the bed.
Infill/Wall Overlap
Top solid infill area is enlarged slightly to overlap with wall for better bonding and to minimize the appearance of pinholes where the infill meets the walls. A value of 25-30% is a good starting point, minimizing the appearance of pinholes. The percentage value is relative to line width of sparse infill.
Surface Pattern
This setting controls the pattern of the surface. The options are:
- Concentric: Fills the surface with inward-tracing loops that follow the outer contour.
- Rectilinear: Fills the surface with straight lines alternating direction per layer.
- Monotonic: Prints lines in a uniform direction for a smoother visual surface.
- Monotonic Lines: Similar to Monotonic but avoids overlapping with the perimeter, reducing excess material at joints. May introduce visible seams.
- Aligned Rectilinear: The surface is printed with rectilinear lines that are aligned with the infill pattern.
- Hilbert Curve: Applies a space-filling curve for even material distribution and a unique appearance. Slow to print but useful in esthetic applications.
- Archimedean Chords: Generates concentric arc-like lines, promoting uniform material spread.
- Octagram Spiral: Creates an octagonal spiral for decorative, esthetic surfaces.
Note
Some patterns may have further information in its Sparse Infill Pattern Wiki