3D-printing/OrcaSlicer
1
0
Fork 0
mirror of https://github.com/SoftFever/OrcaSlicer.git synced 2025-07-23 06:33:57 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions 2
OrcaSlicer/doc/Home.md
Ian Bassi eba08bf727
Some checks failed
Build all / Build All (push) Has been cancelled
Details
Build all / Flatpak (push) Has been cancelled
Details
Publish docs to Wiki / Publish docs to Wiki (push) Has been cancelled
Details
Wiki Update 7 (#10007) 
* Large images optimizations

* Add image and update instructions for junction deviation

Added a new image illustrating the printer jerk limitation setting and updated the calibration documentation to clarify steps for setting Maximum Junction Deviation. Improved formatting and corrected a typo in the instructions.

* Update README links to Wiki

* Fix Wiki image paths + Typos

* Fixes, typos and Infill improvements

* Update VFA calibration guide and add resonance avoidance

Expanded the VFA calibration documentation with more detailed explanations of VFA causes, the VFA Speed Test, and how to use the Resonance Avoidance Speed Range. Added a new image illustrating the resonance avoidance configuration.

* Add surface density setting to top/bottom shells docs

* Ironing Wiki Wip

* Wall and surfaces wiki wip

* Fix top/bottom link

* Better topbottom reddirect

* bridging wiki wip

* Fix TOP bottom

* Wall wiki wip

* strength advanced wiki wip

* speed advance renaming

* inital speed wiki wip

* Other Layer Speed Wiki Wip...

* Speed overhang Wiki WIP

* Travel speed wiki wip

* Speed acceleration wiki wip

* Update speed_settings_initial_layer_speed.md

* Jerk Wiki Wip

* support wiki wip

* Raft wiki wip

* support filamnet wiki wip

* Support ironing wiki wip

* Support advanced Wiki Wip

* Tree wiki wip

* STL images optimizations

* Prime tower wiki wip

* Update PA line diagram images

Were bigger than original used to crop this ones.

* Ooze wiki wip

* Flush wiki wip

* Image optimizatios

* Clarify TPMS-D infill description

Updated the TPMS-D infill section to specify that it refers to the Schwarz Diamond surface, improving clarity for users. Also updated the infill calculator spreadsheet.

Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com>

* images+++

* Multimaterial advanced Wiki Wip

* Skirt Wiki Wip

* Brim wiki wip

* Add Junction Deviation formula to documentation

Included the mathematical formula for Junction Deviation in the cornering calibration documentation to clarify its calculation.

Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com>

* Others special mode Wiki Wip

Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com>

* Fix links

* Fill Multiline infill Wiki

Introduced a new section in the infill documentation describing the Fill Multiline setting, its differences from other slicers, and its use cases. Added a comparison table and illustrative GIF to clarify how OrcaSlicer maintains density and material usage when using multiple infill lines.

* Multiline infill wiki update

Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com>

* Multiline Tab.cpp

* Gcode output Wiki Wip

* Others wiki wips

* Home quality

* Add process links in home

* Quality Basic Missing descriptions

* Update quality_settings_bridging.md

* basic desc

* basic advance strentgth

* Basic speed

* basic other speeds

* Fix link

* Update speed_settings_overhang_speed.md

* Update speed_settings_travel.md

* Update speed_settings_acceleration.md

* Fix

* Expand documentation for acceleration and jerk settings

* Support wiki

* Raft wiki

* Support wiki desc

* Prime tower wiki

* Multimaterial wiki desc

* Filament to features wiki

* Ooze improve

* Fix duplicate text

* Fix typo in volumetric speed calibration guide

Corrected 'promoted' to 'prompted' in the instructions for entering test settings in the volumetric speed calibration documentation.

* centeres image

* Overlapping gif

* Others wiki basic desc

* Clarify retraction calibration recommendation

Expanded the explanation for calibrating retraction settings, specifying that it should be done after Flow and Pressure Advance calibration for optimal extrusion setup.

Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com>

* Links in Readme + minor change

Refined links and formatting in README for better navigation. Expanded wall printing order section in quality settings documentation to clarify Inner/Outer, Inner/Outer/Inner, and Outer/Inner modes. Updated calibration guide images and formatting for improved clarity.

* Add SVG icons to infill pattern comparison table

* Delete doc/images/gui directory

remplaced with GUI

* Create process-preset-full.png

---------

Co-authored-by: Rodrigo <162915171+RF47@users.noreply.github.com>
2025-07-08 08:53:53 +08:00

152 lines
6.2 KiB
Markdown
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

# Welcome to the OrcaSlicer WIKI!
Orca slicer is a powerful open source slicer for FFF (FDM) 3D Printers. This wiki page aims to provide an detailed explanation of the slicer settings, how to get the most out of them as well as how to calibrate and setup your printer.
- [Printer Settings](#printer-settings)
- [Material Settings](#material-settings)
- [Prepare](#prepare)
- [Process Settings](#process-settings)
- [Quality Settings](#quality-settings)
- [Strength Settings](#strength-settings)
- [Speed Settings](#speed-settings)
- [Support Settings](#support-settings)
- [Multimaterial Settings](#multimaterial-settings)
- [Others Settings](#others-settings)
- [Calibrations](#calibrations)
- [Developer Section](#developer-section)
> [!NOTE]
> The Wiki is **Work In Progress** so bear with us while we get it up and running!
> Please consider contributing to the wiki following the [How to contribute to the wiki](How-to-wiki) guide.
## Printer Settings
![printer-preset](https://github.com/SoftFever/OrcaSlicer/blob/main/doc/images/GUI/printer-preset.png)
- [Air filtration/Exhaust fan handling](air-filtration)
- [Auxiliary fan handling](Auxiliary-fan)
- [Chamber temperature control](chamber-temperature)
- [Adaptive Bed Mesh](adaptive-bed-mesh)
- [Using different bed types in Orca](bed-types)
## Material Settings
![filament-preset](https://github.com/SoftFever/OrcaSlicer/blob/main/doc/images/GUI/filament-preset.png)
- [Single Extruder Multimaterial](semm)
- [Pellet Printers (pellet flow coefficient)](pellet-flow-coefficient)
## Prepare
First steps to prepare your model/s for printing.
- [STL Transformation](stl-transformation)
## Process Settings
![process-preset](https://github.com/SoftFever/OrcaSlicer/blob/main/doc/images/GUI/process-preset.png)
The below sections provide a detailed settings explanation as well as tips and tricks in setting these for optimal print results.
### Quality Settings
![process-quality](https://github.com/SoftFever/OrcaSlicer/blob/main/doc/images/GUI/process/process-quality.png?raw=true)
- [Layer Height Settings](quality_settings_layer_height)
- [Line Width Settings](quality_settings_line_width)
- [Seam Settings](quality_settings_seam)
- [Precision](quality_settings_precision)
- [Precise Wall](quality_settings_precision#precise-wall)
- [Precise Z Height](quality_settings_precision#precise-z-height)
- [Slice gap closing radius](quality_settings_precision#slice-gap-closing-radius)
- [Resolution](quality_settings_precision#resolution)
- [Arc fitting](quality_settings_precision#arc-fitting)
- [X-Y Compensation](quality_settings_precision#x-y-compensation)
- [Elephant foot compensation](quality_settings_precision#elephant-foot-compensation)
- [Precise wall](quality_settings_precision#precise-wall)
- [Precise Z Height](quality_settings_precision#precise-z-height)
- [Polyholes](quality_settings_precision#polyholes)
- [Ironing](quality_settings_ironing)
- [Wall generator](quality_settings_wall_generator)
- [Walls and surfaces](quality_settings_wall_and_surfaces)
- [Bridging](quality_settings_bridging)
### Strength Settings
![process-strength](https://github.com/SoftFever/OrcaSlicer/blob/main/doc/images/GUI/process/process-strength.png?raw=true)
- [Walls](strength_settings_walls)
- [Top and Bottom Shells](strength_settings_top_bottom_shells)
- [Infill](strength_settings_infill)
- [Advanced](strength_settings_advanced)
### Speed Settings
![process-speed](https://github.com/SoftFever/OrcaSlicer/blob/main/doc/images/GUI/process/process-speed.png?raw=true)
- [Initial Layer Speed](speed_settings_initial_layer_speed)
- [Other Layers Speed](speed_settings_other_layers_speed)
- [Overhang Speed](speed_settings_overhang_speed)
- [Travel Speed](speed_settings_travel)
- [Acceleration](speed_settings_acceleration)
- [Jerk (XY)](speed_settings_jerk_xy)
- [Advanced / Extrusion rate smoothing](speed_settings_advanced)
### Support Settings
![process-support](https://github.com/SoftFever/OrcaSlicer/blob/main/doc/images/GUI/process/process-support.png?raw=true)
- [Support](support_settings_support)
- [Raft](support_settings_raft)
- [Support Filament](support_settings_filament)
- [Support Ironing](support_settings_ironing)
- [Advanced](support_settings_advanced)
- [Tree Supports](support_settings_tree)
### Multimaterial Settings
![process-multimaterial](https://github.com/SoftFever/OrcaSlicer/blob/main/doc/images/GUI/process/process-multimaterial.png?raw=true)
- [Prime Tower](multimaterial_settings_prime_tower)
- [Filament for Features](multimaterial_settings_filament_for_features)
- [Ooze Prevention](multimaterial_settings_ooze_prevention)
- [Flush Options](multimaterial_settings_flush_options)
- [Advanced](multimaterial_settings_advanced)
### Others Settings
![process-others](https://github.com/SoftFever/OrcaSlicer/blob/main/doc/images/GUI/process/process-others.png?raw=true)
[Skirt](others_settings_skirt)
[Brim](others_settings_brim)
[Special Mode](others_settings_special_mode)
[G-Code Output](others_settings_g_code_output)
[Post Processing Scripts](others_settings_post_processing_scripts)
[Notes](others_settings_notes)
## Calibrations
The [Calibration Guide](Calibration) outlines Orca’s key calibration tests and their suggested order of execution.
- [Temperature](temp-calib)
- [Flow Rate](flow-rate-calib)
- [Pressure Advance](pressure-advance-calib)
- [Adaptive Pressure Advance Guide](adaptive-pressure-advance-calib)
- [Retraction](retraction-calib)
- [Tolerance](tolerance-calib)
- Advanced:
- [Volumetric Speed](volumetric-speed-calib)
- [Cornering (Jerk & Junction Deviation)](cornering-calib)
- [Input Shaping](input-shaping-calib)
## Developer Section
This is a documentation from someone exploring the code and is by no means complete or even completely accurate. Please edit the parts you might find inaccurate. This is probably going to be helpful nonetheless.
- [How to build Orca Slicer](How-to-build)
- [Localization and translation guide](Localization_guide)
- [How to create profiles](How-to-create-profiles)
- [How to contribute to the wiki](How-to-wiki)
- [Preset, PresetBundle and PresetCollection](Preset-and-bundle)
- [Plater, Sidebar, Tab, ComboBox](plater-sidebar-tab-combobox)
- [Slicing Call Hierarchy](slicing-hierarchy)
Reference in a new issue View git blame Copy permalink