Lukas Matena
f0e9ad46ec
Renamed the gcfMarlin enum value to gcfMarlinLegacy so we never mistake it for the new one
...
There should be no functional change.
2021-04-06 15:45:49 +02:00
Lukas Matena
151a76ee92
Duplicated Marlin firmware flavor to 'Marlin (legacy)' and 'Marlin Firmware'
...
The two flavors should be identical after this commit, except that GCodeProcessor.cpp was not updated. This shall be done in a later step.
2021-04-06 15:45:49 +02:00
Lukas Matena
7fb9610d3a
Merge branch 'lm_wipe_tower_improvements'
2021-04-06 15:45:36 +02:00
Lukas Matena
58a811a638
Wipe tower: correctly detect first layer even with 'No sparse layers' option enabled
2021-04-06 15:37:39 +02:00
Lukas Matena
43d9e38325
Wipe tower: reorder extruders so first layer starts with soluble if possible
...
That way it will not be wiped on first layer
2021-04-06 15:37:39 +02:00
Lukas Matena
5d636ab853
Wipe tower: respect first_layer_speed
2021-04-06 15:37:39 +02:00
enricoturri1966
5d4b7c03b6
Extended interface of project dirty state manager
2021-04-06 13:17:29 +02:00
enricoturri1966
144e37c274
1st installment of project dirty state manager
2021-04-06 10:00:17 +02:00
Lukas Matena
3459231111
Wipe tower: set travel feedrate for a move from custom toolchange position to the wipe tower ( #5483 )
2021-04-05 23:39:27 +02:00
Lukas Matena
67bc2e472f
Wipe tower: fix wipe moves after recent changes
2021-04-05 23:39:27 +02:00
Lukas Matena
a6ddab856b
Wipe tower: refactoring of brim and solid infill on first layer
2021-04-05 23:39:27 +02:00
Lukas Matena
f6de946dd7
Wipe tower: don't use soluble filament for perimeters, sparse infill or first layer
2021-04-05 23:39:27 +02:00
Lukas Matena
3ed68ac28a
Wipe tower: slightly changed finish_layer logic so it can be called after any toolchange
2021-04-05 23:39:27 +02:00
Lukas Matena
cc7ef40e20
Wipe tower: remove unfinished square wipe tower option
2021-04-05 23:39:27 +02:00
Lukas Matena
97c4c02001
Wipe tower: don't do sparse infill when there is a soluble filament above it
2021-04-05 23:39:27 +02:00
Lukáš Hejl
dd4b26ba25
Fix of 7bd412a2ca
2021-04-05 20:32:41 +02:00
Pascal de Bruijn
d09871441a
creality.ini: add Tough PLAs
2021-04-05 17:24:16 +02:00
Lukáš Hejl
7bd412a2ca
A few test cases for Voronoi diagrams.
...
A few test cases collected from multi-material segmentation. All new test cases are suppressed not to fail a building process.
2021-04-05 16:47:00 +02:00
Pascal de Bruijn
744311f3c3
creality.ini: improve bridging
2021-04-04 15:24:57 +02:00
tamasmeszaros
04526d5c28
Merge branch 'tm_libnest2d_backport'
2021-04-01 09:50:12 +02:00
enricoturri1966
194cab75d9
Refactoring in GCodeViewer
2021-04-01 08:24:19 +02:00
YuSanka
46e4f54fd0
Auto color change: next improvements
2021-03-31 15:10:48 +02:00
tamasmeszaros
f117d02750
Back-porting improvements for libnest2d
2021-03-31 09:36:54 +02:00
enricoturri1966
ab3890dab5
Follow-up of 3fce8398f0 - Fixed build warnings
2021-03-31 08:54:58 +02:00
Lukas Matena
7007bf665c
Added a missing include for gcc
2021-03-30 23:04:42 +02:00
YuSanka
c71fe03022
Fixed rescale for nodes with itInstanceRoot | itLayerRoot types
2021-03-30 18:26:28 +02:00
tamasmeszaros
a62a02aca1
Merge branch 'tm_fix_wx_linking'
2021-03-30 14:17:31 +02:00
tamasmeszaros
fabb6716ee
Extend wx png and expat fixes for all of its built-in libraries
...
That means adding tiff and jpeg
2021-03-30 12:56:37 +02:00
enricoturri1966
3fce8398f0
Follow-up of 6ffa51da58 - Modified export of final M73 lines for remaining time to next printer stop accordingly to firmware specifications
2021-03-30 09:59:10 +02:00
Vojtech Bubnik
e94a4da954
Merge branch 'master' of https://github.com/Prusa3d/PrusaSlicer
2021-03-29 14:15:27 +02:00
Vojtech Bubnik
acce99f29b
Fixed some compilation warnings in MutablePolygon.cpp
2021-03-29 14:15:18 +02:00
rtyr
525f05c975
updated min_slic3r_version to 2.4.0-alpha0
2021-03-29 09:38:59 +02:00
rtyr
507ba46ecc
updated min_slic3r_version to 2.4.0-alpha0
2021-03-29 09:38:01 +02:00
YuSanka
45ac53efa1
Code refactoring to reduce switch statements on ConfigOptionEnum<> templates
2021-03-26 19:01:10 +01:00
YuSanka
2c23e25497
DoubleSlider: fix for 1c2d264570
2021-03-26 13:34:37 +01:00
Vojtech Bubnik
13c178b7f7
Enabling ASAN on MSVC
2021-03-25 10:12:02 +01:00
enricoturri1966
68303059a6
Extract bed size from gcode produced with Simplify3d
2021-03-25 09:23:14 +01:00
YuSanka
3a5360651d
Added "Printable" menu item for multiple selection
2021-03-24 20:26:31 +01:00
enricoturri1966
cfcce6f29a
Follow-up of 10c3e82917 - Updated version for unpublished techs in Technologies.hpp
2021-03-24 14:30:46 +01:00
enricoturri1966
a542fea7da
Merge remote-tracking branch 'origin/et_extended_m73'
2021-03-24 12:07:55 +01:00
enricoturri1966
645e5b6862
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_extended_m73
2021-03-24 12:05:36 +01:00
enricoturri1966
9c951b3108
Fixed parsing of g-code files generated by newer versions of Simplify3D
2021-03-24 11:36:16 +01:00
YuSanka
8bc23c90fc
Suppress to show Search window on the Plater using Ctrl+F shortcut, when we are at Preview mode
2021-03-24 11:32:33 +01:00
Oleksandra Yushchenko
4496e2a8ce
Follow-up of 908c48ae6a -> Fixed update after switching tab after editing custom g-code in settings tabs ( #6258 )
2021-03-24 11:20:57 +01:00
YuSanka
991fa67fd1
OptionsSearcher improvements: Fixed a key for option() and groups_and_categories.
...
It contains "preset_type;opt_key" now. This key helps to avoid a collisions by using a same options key from different type presets.
Example: Option "elefant_foot_compensation" is in Print presets and SLA_printer presets
2021-03-24 11:14:07 +01:00
Vojtech Bubnik
10c3e82917
Updated version number,
...
alpha stores configs in alpha directory.
2021-03-23 13:50:53 +01:00
enricoturri1966
a0feb0f652
Preview and G-code viewer - Fixed synchronization between markers for pause print, color changes, custom g-code, retractions, deretractions and current line shown in g-code window
2021-03-23 12:46:04 +01:00
Lukas Matena
cafa5b26a8
Compilation fixes
2021-03-23 12:40:29 +01:00
Vojtech Bubnik
af9c7c967f
Implementing a new switch for the shape of support towers:
...
expanded to a grid (the old way) vs.
snug (like the upstream Slic3r, Cura or Ideamaker).
Snug supports suffered from the degeneracies when merging overhang islands
over a large number of layers when projecting the support towers down.
We borrowed the idea & a bit of code from Cura by simplifying the support
polygons by closing the concave cracks, see the smooth_outward() function
and the MutablePolygon class.
Fixes Support problems with models with hole in the walls. #555
Fixes Support in the Air #740
Fixes [Bug] Supports generated beyond bed edges (X<0 and X>250) and where none are needed. #902
Fixes Unable to remove support material/can't change support "inflation distance" #2708
Fixes FR: support inflation and support conform to boundary #4783
Fixes Support blocker not working on this model #1346
Fixes Unnecessary support material #1993
Fixes support blocker enforcer issue #6240
2021-03-23 11:06:45 +01:00
Vojtech Bubnik
00295919bf
Fixes of MutablePolygon
2021-03-23 11:06:45 +01:00
