SoftFever
ec7a7ff1ff
PA per filament
2022-11-05 14:49:37 +08:00
SoftFever
fdb4196ad5
handle klipper set_velocity_limit
2022-10-30 00:50:15 +08:00
SoftFever
a89a354c31
layer count issue fixed
2022-10-28 17:16:07 +08:00
SoftFever
bd672054cc
fix aux fan issue for third party printers
2022-10-25 21:42:36 +08:00
SoftFever
ec28acf476
Special handling temperature for Klipper
2022-10-25 10:40:23 +08:00
SoftFever
dd77599dea
small perimeter threshold
2022-10-24 22:35:40 +08:00
SoftFever
397e0f0a29
Merge branch 'SoftFever' into feature/small_perimeter
2022-10-24 14:53:58 +08:00
SoftFever
166832cd94
add back small perimeter support
2022-10-24 14:47:18 +08:00
SoftFever
e65ba104dd
support changing thumbnail size
2022-10-23 23:00:46 +08:00
SoftFever
cd71a86d3f
support klipper gcode flavor
2022-10-23 19:42:01 +08:00
SoftFever
658d41dd69
Omit M981 for third party printers
2022-10-23 15:49:02 +08:00
SoftFever
b7572b9004
Omit BBL specific gcodes for other machines
2022-10-22 00:19:08 +08:00
SoftFever
35455e6533
Merge branch 'master-remote' into feature/merge_remote_1.3
...
# Conflicts:
# bbl/i18n/zh_cn/BambuStudio_zh_CN.po
# resources/i18n/zh_cn/BambuStudio.mo
# resources/profiles/Voron.json
# resources/profiles/Voron/filament/Voron Generic ABS.json
# resources/profiles/Voron/filament/Voron Generic ASA.json
# resources/profiles/Voron/filament/Voron Generic PA-CF.json
# resources/profiles/Voron/filament/Voron Generic PA.json
# resources/profiles/Voron/filament/Voron Generic PC.json
# resources/profiles/Voron/filament/Voron Generic PETG.json
# resources/profiles/Voron/filament/Voron Generic PLA-CF.json
# resources/profiles/Voron/filament/Voron Generic PLA.json
# resources/profiles/Voron/filament/Voron Generic PVA.json
# resources/profiles/Voron/filament/Voron Generic TPU.json
# resources/profiles/Voron/filament/fdm_filament_abs.json
# resources/profiles/Voron/filament/fdm_filament_asa.json
# resources/profiles/Voron/filament/fdm_filament_common.json
# resources/profiles/Voron/filament/fdm_filament_pa.json
# resources/profiles/Voron/filament/fdm_filament_pc.json
# resources/profiles/Voron/filament/fdm_filament_pet.json
# resources/profiles/Voron/filament/fdm_filament_pla.json
# resources/profiles/Voron/filament/fdm_filament_pva.json
# resources/profiles/Voron/filament/fdm_filament_tpu.json
# resources/profiles/Voron/machine/Voron 0.1 0.4 nozzle.json
# resources/profiles/Voron/machine/Voron 0.1.json
# resources/profiles/Voron/machine/Voron 2.4 250 0.4 nozzle.json
# resources/profiles/Voron/machine/Voron 2.4 250.json
# resources/profiles/Voron/machine/Voron 2.4 300 0.4 nozzle.json
# resources/profiles/Voron/machine/Voron 2.4 300.json
# resources/profiles/Voron/machine/Voron 2.4 350 0.4 nozzle.json
# resources/profiles/Voron/machine/Voron 2.4 350.json
# resources/profiles/Voron/machine/Voron Trident 250 0.4 nozzle.json
# resources/profiles/Voron/machine/Voron Trident 250.json
# resources/profiles/Voron/machine/Voron Trident 300 0.4 nozzle.json
# resources/profiles/Voron/machine/Voron Trident 300.json
# resources/profiles/Voron/machine/Voron Trident 350 0.4 nozzle.json
# resources/profiles/Voron/machine/Voron Trident 350.json
# resources/profiles/Voron/machine/fdm_klipper_common.json
# resources/profiles/Voron/process/0.08mm Extra Fine @Voron.json
# resources/profiles/Voron/process/0.12mm Fine @Voron.json
# resources/profiles/Voron/process/0.15mm Optimal @Voron.json
# resources/profiles/Voron/process/0.20mm Standard @Voron.json
# resources/profiles/Voron/process/0.24mm Draft @Voron.json
# resources/profiles/Voron/process/0.28mm Extra Draft @Voron.json
# resources/profiles/Voron/process/fdm_process_voron_common.json
# src/libslic3r/Preset.cpp
# src/libslic3r/PrintConfig.cpp
# src/libslic3r/PrintConfig.hpp
# src/libslic3r/PrintObject.cpp
# src/slic3r/GUI/BackgroundSlicingProcess.cpp
# src/slic3r/GUI/Field.cpp
# src/slic3r/GUI/GLToolbar.cpp
# src/slic3r/GUI/GLToolbar.hpp
# src/slic3r/GUI/MainFrame.cpp
# src/slic3r/GUI/MainFrame.hpp
# src/slic3r/GUI/NotificationManager.cpp
# src/slic3r/GUI/PhysicalPrinterDialog.cpp
# src/slic3r/GUI/PhysicalPrinterDialog.hpp
# src/slic3r/GUI/Plater.cpp
# src/slic3r/GUI/Plater.hpp
# src/slic3r/GUI/PrintHostDialogs.cpp
# src/slic3r/GUI/PrintHostDialogs.hpp
# src/slic3r/Utils/PrintHost.cpp
2022-10-20 23:12:00 +08:00
SoftFever
293f2af0dc
move config info to the end of file
2022-10-20 21:30:42 +08:00
yifan.wu
aaa70fed23
FIX: fix print order issue of flush_into_support
...
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: Icc4cef72bed7e439b63a0f0fd02a85bbf890ea38
2022-10-20 19:34:37 +08:00
yifan.wu
946ba89cd7
FIX: fix an flush_into_support bug for copied objects
...
Copied objects share extrusion paths but they should be treated
seperately.
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: I891c70d261a2fa5b198ec776694d74eeb8fd987f
2022-10-20 19:34:37 +08:00
salt.wei
10d8b6c609
ENH: first layer nozzle temp doesn't work sometimes
...
This is a bug when printing multi filament
When the filament changing is finished before printing
first layer, the temperature should be resumed to be
initial layer nozzle temperature as well.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I82231f8a47fac1995d8f1ba12c4f7797afce2891
2022-10-20 19:34:37 +08:00
yifan.wu
76b40c9636
FIX: fix an flush_into_object bug for copied objects
...
Copied objects share extrusion paths but they should be treated
seperately.
Thanks hisptoot for the fix.
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: I24d3050df7d284e92fc50a0213023a43ee8c529c
2022-10-20 19:34:37 +08:00
xiang.zeng
9cf95696a4
NEW: enable lightning infill pattern for model and tree support
...
Change-Id: I6e2cbfdd30f8d222f88301ed0c8cc89e21cfdc24
(cherry picked from commit ddfee7c069cfc42685be509d48b8c609e1dc0cfc)
2022-10-20 19:34:37 +08:00
salt.wei
b8d9a2fdf3
ENH: add custom gcode back
...
Add custom gcode back, which can be inserted in
gcode viewer layer slider.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I270cc438bedf11b30f07f8f9bad6ae5436d5a2dd
2022-10-20 19:34:37 +08:00
salt.wei
c02dd81c61
ENH: emit printing acceleration before start gcode
...
As title. Make calibration to use printing acceleration,
although no-using has no influence on calibration.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I98cb791c1e0fba6b77360b60567c29511cff75b8
2022-10-20 19:34:37 +08:00
SoftFever
be75bfaacb
z lift type
2022-10-19 17:02:19 +08:00
SoftFever
d0fab5a5bd
Merge branch 'SoftFever' into feature/more_parameters
2022-10-18 18:06:39 +08:00
SoftFever
eebb69d3ae
more moonraker support
2022-10-18 18:06:28 +08:00
SoftFever
e131938cac
wip
2022-10-16 16:39:45 +08:00
SoftFever
1ef2b509e5
label objects by default
2022-10-13 22:33:59 +08:00
SoftFever
01d5dcdc09
Remove M900 S0 code.
2022-10-13 22:33:59 +08:00
SoftFever
65062d33eb
tweak some messages
2022-10-04 12:12:37 +08:00
SoftFever
bf7479ca35
Add following options:
...
1. Travel acceleration control
2. X Y jerk control for different parts
3. Manually Linear Advance control
2022-10-03 11:26:48 +08:00
SoftFever
5200e03257
Fix an issue that bed temperature for other layers is not set properly
2022-09-29 11:46:21 +08:00
SoftFever
0a09c7da07
Fix an issue that bed temperature for other layers are not set properly
2022-09-24 11:32:57 +08:00
SoftFever
fc96fa3bc0
Allow users to set acceleration for outer/inner walls
2022-09-22 23:46:01 +08:00
SoftFever
bb74438f7c
Merge remote-tracking branch 'remote/master' into SoftFever
...
# Conflicts:
# src/libslic3r/Preset.cpp
2022-09-09 21:54:57 +08:00
zhimin.zeng
96e827ca7f
FIX: the tree support use interface materials
...
Change-Id: I6c61c427095bf8157a2e29a8bb81a1754b6fd980
(cherry picked from commit 4b6d5c25599ca8c97184fd977a3bac2f278f8896)
2022-09-09 19:59:27 +08:00
Arthur
e7c977f86b
ENH: move first layer inspection before 2nd layer
...
So an object with a single layer won't do first layer inspection.
Change-Id: I43d8d41b64215b13573c517e6350f7feff5f2e33
2022-09-08 21:49:36 +08:00
salt.wei
4e1caa428d
ENH: wipe_distance should not to be 0 or negative value
...
As title, fix github issue #220
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: If63c839da1341ac2e16bbfa287c4e32564284d59
2022-09-08 21:49:36 +08:00
SoftFever
4fd174175c
Merge remote-tracking branch 'remote/master' into SoftFever
2022-09-03 00:17:59 +08:00
yifan.wu
0b323649d3
ENH: order support toolpaths to reduce extra travels
...
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: Ifae5807ff094eede1eaf7494430fdd174572a021
(cherry picked from commit dfb3fc991a6f4a6e7dcdcce902f26ffa789f57fb)
2022-09-02 13:16:54 +08:00
zhimin.zeng
5aaa785655
FIX: Slicing process crashes when enable timelapse
...
Change-Id: Idc3068b73809ee28fe685266fcd2355555e9f02a
2022-09-02 12:52:18 +08:00
zhimin.zeng
0ab13a6abb
ENH: Add Textured PEI Plate
...
Change-Id: I08178e86a8ccb23844cca00bc9d265df7507f910
(cherry picked from commit 8f101963ecab1352e2721ead83928b327d6c0dbd)
2022-09-02 12:52:18 +08:00
lane.wei
fdd9582e3e
add the logic to reduce slicing time between shared-mesh objects
...
also reduce the storage size
Change-Id: I61d6e0997979ec0ce701cc580fa6640a21b6260f
2022-09-02 12:52:18 +08:00
salt.wei
36528738fe
ENH: force retraction and wiping when leave external wall
...
This can reduce dragging and reduce seams
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I60e3c11493ca9ef00a8fd22c437f67cddac32724
2022-09-02 12:52:18 +08:00
salt.wei
d73142c2f9
ENH: new seam strategy from prusa2.5
...
As title. Thanks @Prusa
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I2fa177e27ac53211952ea9b6c62e98182b8f05ce
2022-09-02 12:52:18 +08:00
SoftFever
769bc14a8a
Merge remote-tracking branch 'remote/master' into SoftFever
...
# Conflicts:
# src/libslic3r/PerimeterGenerator.cpp
2022-08-28 12:03:49 +08:00
zhimin.zeng
f745c5fea2
ENH: Optimize and design the time-lapse wiper tower
...
Multiplex existing wipe tower and revert old time-lapse wipe tower code
Change-Id: Ia1cba9808647ea900f691b2c5d5887077be12d89
(cherry picked from commit 61f41df572d11b7cc738c34f2624fd123cd9a6df)
2022-08-26 09:25:59 +08:00
SoftFever
a3b3b368e2
Profile rework ( #4 )
...
* default BBL profile
* voron
* wip
* Voron profile
* Prusa MK3S
* add Prusa mk3s
* fix an issue that print_host value was not retrieved.
* add chamber temperature option for filament
* slightly adjust thumbernail angle
* Revert "slightly adjust thumbernail angle"
This reverts commit 6ad38efb36
2022-08-24 15:40:43 +08:00
SoftFever
488b1cd8f5
Support upload g-code to third-party printers
...
* wip
* fix cmake warning
* add UI and config options for Moonraker connection
* wip: copy whole print host UI from PS
* add more needed options
* wip 2
* fix string issue on Mac
* wip3
* fix cmake warning
* working
need tweaks
* cleanup
* support thumbnail
* fix DNS resolving issue in Windows
* code clean up
2022-08-20 23:06:41 +08:00
salt.wei
70313deaf0
ENH: fix one bug which cause zero speed when flushing
...
filament_max_volumetric may be 0 which cause zero
flushing speed. Add protection for this issue.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I866b9d97c9c6d97122a4a2beaf508ce9c72ee3b2
2022-08-08 22:19:42 +08:00
lane.wei
e9e4d75877
Update the codes to 01.01.00.10 for the formal release
...
1. first formal version of macos
2. add the bambu networking plugin install logic
3. auto compute the wipe volume when filament change
4. add the logic of wiping into support
5. refine the GUI layout and icons, improve the gui apperance in lots of
small places
6. serveral improve to support
7. support AMS auto-mapping
8. disable lots of unstable features: such as params table, media file download, HMS
9. fix serveral kinds of bugs
10. update the document of building
11. ...
2022-07-22 20:35:34 +08:00
lane.wei
1555904bef
Add the full source of BambuStudio
...
using version 1.0.10
2022-07-15 23:42:08 +08:00
