Joseph Lenox
488feb2335
Added --no-gui flag to force CLI usage (allows for CLI usage with AppImage build).
...
Forced --gui flag in AppImage build.
2017-11-30 18:42:31 +01:00
bubnikv
82bde51c27
Removed the 'simple' mode.
2017-06-14 11:48:08 +02:00
bubnikv
72ae3585e4
Removed a broken Arc Fitting feature.
...
Removed the questionable Pressure Advance feature. It is better to use the Pressure Advance implemented into a firmware.
Added a C++ implementation of GCodeReader and SpiralVase, thanks to @alexrj
Added a C++ implementation of GCodeTimeEstimator, thanks to @lordofhyphens
2017-04-26 14:24:31 +02:00
bubnikv
bc7ff623f8
Updated from upstream,
...
build instructions for Windows point to Prusa3D instructions.
2017-03-23 17:00:46 +01:00
Ralph Giles
061a79bfbd
Readme improvements ( #3679 )
...
* Use svg badge for travis build status.
This avoids bluriness with high-density displays. We're already
using svg for the appveyor status.
* Update README to use https urls.
Both xkcd and freenode are available securely now.
2017-02-21 13:12:21 +01:00
Joseph Lenox
abda054720
Cherry-picked Repetier acceleration fixes, thanks to @lordofhyphens
...
e0d8101627885f27b8ae
2017-02-10 09:39:19 +01:00
bubnikv
1fb57e439e
Defined the +-* operators on Pointf.
...
Removed the deprecated VibrationLimit feature.
Added triangle infill.
The Prusa3D fork of Slic3r has been marked as "Slic3r Prusa Edition"
with menus pointing to the prusa3d/slic3r github release page
and Prusa3D drivers downloads page.
2016-10-21 16:53:42 +02:00
bubnikv
47cc9687a0
Added a new switch: ensure_vertical_shell_thickness
...
This enables a zig-zag infill similar to Cura or Simplify3D
on overhangs.
2016-10-16 22:11:19 +02:00
bubnikv
ca98e2655a
New command line option: --dont-arrange
...
Don't arrange the objects on the build plate. The model coordinates
define the absolute positions on the build plate.
The option --print-center will be ignored.
Also there is a fix in the command line invocation of --duplicate-grid
so it will run, but still there is something broken there and the results
are not correct.
2016-09-05 11:32:58 +02:00
Alessandro Ranellucci
8138fbf349
New --retract-lift-above and --retract-lift-below options. #763 #3057
2015-12-18 18:36:39 +01:00
Alessandro Ranellucci
57e6a7becd
Fix --help output: --retract-layer-change is disabled by default. #2846
2015-05-25 00:35:57 +02:00
Alessandro Ranellucci
1180a6d83f
Merge pull request #2508 from strahlex/machinekit-gcode
...
added support Machinekit flavour GCode
2015-02-15 17:00:08 +01:00
Alessandro Ranellucci
43f4806142
Load files into the GUI when supplying them as command line arguments along with the --gui switch. #2644
2015-02-14 12:54:06 +01:00
Alexander Rössler
d35226b889
added support Machinekit flavour GCode
2015-02-06 18:48:46 +01:00
Alessandro Ranellucci
07cd25d0ec
New option for customization of infill/perimeters overlap. #2459
2015-02-01 12:08:25 +01:00
Alessandro Ranellucci
059b00a829
New --before-layer-change option and new layer_z placeholder. #2602
2015-01-30 20:08:00 +01:00
Cyryl Plotnicki-Chudyk
1bc83e658b
use 'perl Build.PL --sudo' instead of 'sudo perl Build.PL'
2015-01-20 16:48:15 +01:00
Alessandro Ranellucci
7b980c1dc9
New option for vertical distance between object and support material, with special handling of the 0 case that disabled bridge flow/speed in order to allow for soluble material. #2491 #2272 #2069 #1942 #2435 #1703
2015-01-19 09:52:24 +01:00
Alessandro Ranellucci
306bc02e29
Fix --help, wrong default were displayed for a couple options. #2541
2015-01-15 17:49:22 +01:00
adius
4b38cffc60
Fix typo in documentation
2015-01-13 00:19:01 +01:00
Alessandro Ranellucci
47e4e8bb66
Option to use volumetric E values. #1746
2015-01-05 19:39:10 +01:00
Alessandro Ranellucci
c00061678b
Use perimeter extruder for brim. #618
2014-12-17 00:45:05 +01:00
Alessandro Ranellucci
e79aa2e81c
New --solid-infill-extruder option. Includes a refactoring of the strategy used to order layer extrusions according to their extruder and island; toolchanges and travel moves should be more optimized now. #618
2014-12-17 00:34:00 +01:00
Alessandro Ranellucci
ff9b53260d
New experimental feature for pressure management. Credits to @llluis for the original implementation. #1203 #1677 #2018
2014-11-24 18:22:39 +01:00
Alessandro Ranellucci
c2e710d092
Removed --g0
2014-10-21 21:41:11 +02:00
Alessandro Ranellucci
0d2dcbc85b
Typo in command line help (wrong default for default_acceleration). #2283
2014-09-24 22:25:23 +02:00
Alessandro Ranellucci
a776cf280b
New --split option
2014-08-03 16:08:04 +02:00
Alessandro Ranellucci
a02ea2842c
Change default layer height to 0.3mm
2014-07-23 14:15:14 +02:00
Alessandro Ranellucci
f81232b79d
Remove --bed-size from --help output
2014-07-04 10:56:06 +02:00
Alessandro Ranellucci
e3e69251cb
New XY Size Compensation option. #581 #56
2014-06-10 13:28:57 +02:00
Alessandro Ranellucci
3599bd0bae
Distinct extrusion width for external perimeters
2014-06-09 21:22:15 +02:00
Alessandro Ranellucci
88a2e5c791
Typo seal -> seam :-)
2014-05-24 22:10:28 +02:00
Alessandro Ranellucci
a3bd1b5302
New seal_position option that replaces randomize_start, start_perimeters_at_concave_points and start_perimeters_at_non_overhang. The two latter options are now always on by default. A new "Aligned" seal position value has been added, that forces starting points to be aligned when not randomized. #1741 #925
2014-05-22 19:34:49 +02:00
Alessandro Ranellucci
8ca352eb62
Separate speed option for support material interface. #2009
2014-05-21 15:21:20 +02:00
Y. Sapir
85bca96982
Add dir --output msg to README, too.
2014-04-27 14:21:59 +03:00
Alessandro Ranellucci
ce9cf4d964
Don't put supports under bridges and potential bridges
2014-04-26 17:19:50 +02:00
Alessandro Ranellucci
fe1691c151
New --cut feature
2014-04-25 10:20:30 +02:00
Alessandro Ranellucci
7421a7bf63
Turn fill_density into percentage
2014-03-22 16:23:33 +01:00
Alessandro Ranellucci
05c3c56745
Update README
2013-11-16 10:20:11 +01:00
Alessandro Ranellucci
beb7939e22
Rename standby_temperature to ooze_prevention. #1523
2013-11-15 16:01:15 +01:00
Alessandro Ranellucci
bcc061176c
New option to use G10/G11 for firmware-controlled retraction. #1494
2013-10-27 16:59:18 +01:00
Alessandro Ranellucci
ae7600ee55
Update MANIFEST
2013-09-19 16:06:57 +02:00
Alessandro Ranellucci
213f832e75
Tiny fixed to README [ci skip]
2013-09-19 12:11:22 +02:00
Alessandro Ranellucci
b90a896a50
Update README [ci skip]
2013-09-19 12:09:13 +02:00
