yw4z
3c65617139
Fixes / Improvements for Covers & Printer Selection dialog ( #11151 )
...
* init
* update
* Crop cover images
* match setup wizard UI
* update
* tiertime
* anycubic
* anycubic
* construct3d
* update
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
2025-11-04 10:16:06 +08:00
EmilVitus
6ab6b37c4a
Changed slash to backslash in before_layer_change_gcode ( #11226 )
2025-11-01 20:22:17 +08:00
yw4z
ff0507e5a3
Profile folder optimizations (Anycubic, Artillery, Bambu Lab, BIQU, Creality, Flashforge, Prusa, Ratrig, Sovol, Volumic, Voron, VzBot, Z-Bolt, Wanhao and more) ( #10806 )
...
* init
* voron covers
* voron models
* qidi hotends
* ultimaker
* seckit
* kingroon
* Update kp3s_bed.stl
* default hotend
* VzBot
* Update goliath.stl
* Construct3D
* comgrow
* biqu
* artillery
* anycubic
* bambulab
* flashforge
* chuanying
* update
* ratrig
* snapmaker
* Update sovol_zero_buildplate_model.stl
* sovol
* sovol
* Update wm_3dp_hotend.stl
* Update magicmaker_hotend.stl
* flsun
* iQ
* wanhao
* deltamaker
* phrozen
* MagicMaker covers
* z-bold
* volumic
* VzBot covers
* custom printers
* custom printer covers
* orca arena
* Update Orca Arena X1 Carbon_cover.png
* creality
* sovol sv08 max
* qidi texture
* Update qidi_xplus_buildplate_texture.png
* bump versions
* folgertech
* twotrees
* VzBot
* dremel
* FlyingBear
* Wanhao
* wanhao
* Delete 230 - Mono320x320.png
* voron
* voron
* voron
* seckit
* ultimaker
* kingroon
* default hotend
* Update qidi_xseries_gen3_hotend.stl
* Update deltamaker_2_buildplate_texture.svg
* vzbot
* Update goliath.stl
* biqu
* anycubic
* folgertech
* geetech
* ginger additive
* anycubic
* Update Wanhao D12-300_hotend.stl
* phrozen
* bump versions
* fix missing files on linux & add new models for sv07
* fix missing files
* Prusa
* update
* Update ultimaker_2_buildplate_model.stl
* fix all cover images
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
2025-10-25 15:41:29 +08:00
Anson Liu
fcb640bee1
Set Ironing angle setting to be a relative degree offset from top surface infill direction ( #10841 )
...
* Change ironing angle setting to be an offset angle from the top surface angle rather offset from the layer 0 angle that changes on each layer.
* Change Ironing angle offset range from [-1,359] to [0,359].
-1 is redundant because it is the same behavior as 0 offset.
* Change ironing_angle new default value to 0.
* Update existing print profiles' hardcoded ironing_angles from -1 to 0 to reflect new default value.
* Add migration for old -1 ironing_angle settings. Remove logic for -1 ironing_angle.
* Add u8 prefix for degree symbol string
* Use solid_infill_direction instead of infill_direction for top surface infill direction. Use calculate_infill_rotation_angle to add offset to solid_infill_rotate_template if used.
* Update quality settings wiki for Ironing
* Set f->is_using_template_angle when making ironing filler objects
* Update quality_settings_ironing link from #angle to #angle-offset
---------
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
2025-10-20 09:01:53 +08:00
Erik GS
737948be1f
[Profiles] Fix bed_exclude_area excluding the whole bed on Anycubic Kobra 3 ( #10914 )
Build all / Build All (push) Has been cancelled
Build all / Flatpak (push) Has been cancelled
2025-10-03 01:32:12 +08:00
frawg
fa6a73ec5e
Update Anycubic Kobra 2 Neo machine profile fine tune end gcode ( #10742 )
...
Build all / Build All (push) Has been cancelled
Build all / Flatpak (push) Has been cancelled
- Reduced total amount of retraction as stock PTFE liner may not be able to take the heat. (7mm to 3mm)
- Added X Y to final G28 to avoid crashing into prints.
Co-authored-by: frawg <>
2025-09-19 23:54:41 +08:00
SoftFever
4f50fdc94e
Fixed many profile issues and cleaned up some messes. ( #10686 )
2025-09-11 17:50:53 +08:00
frawg
756129fff2
Fix Anycubic Kobra 2 Neo Machine Profile ( #10548 )
...
Build all / Build All (push) Has been cancelled
Build all / Flatpak (push) Has been cancelled
* Updated machine start and end gcodes
* fix: Update Kobra 2 Neo profile for improved compatibility
- Switch gcode_flavor from marlin to marlin2
- Enable relative E distances for better extrusion control
- Add M420 S1 to start gcode to enable bed leveling mesh
- Add G92 E0 before layer changes to reset extruder position
- Fix end gcode formatting and add M83 for consistent relative mode
- Adjust purge line start position from Y3 to X10 Y5
* fix: Typo in end machine gcode
---------
Co-authored-by: frawg <>
2025-08-30 13:22:10 +08:00
EmilVitus
571adb9a3f
Fixed error in Anycubic Kobra 2 0.4 nozzle.json ( #10128 )
...
Update Anycubic Kobra 2 0.4 nozzle.json
Fixed error:
Relative extruder addressing requires resetting the
extruder position at each layer to prevent loss of
floating point accuracy.
2025-07-18 07:48:28 +08:00
felix-ebbe
736da49da4
updated Anycubic Kobra S1 cover to png with no background ( #9776 )
Build all / Build All (push) Waiting to run
Build all / Flatpak (push) Waiting to run
Publish docs to Wiki / Publish docs to Wiki (push) Has been cancelled
2025-06-01 22:54:20 +08:00
Thomas
83f8b6b625
Set Crosshatch as default infill pattern instead of grid ( #8952 )
2025-03-18 19:53:10 +08:00
Thomas
6473a0d2c8
Fix some filaments profiles for Anycubic Kobra S1 ( #8262 )
...
* Fix some filaments profiles for Anycubic Kobra S1
2025-02-01 21:24:45 +08:00
Thomas
1fc64c55a8
QOL fix : Removed filament_density: 0 from Kobra 3 profiles ( fixes #7367 ) ( #8209 )
...
Removed filament_density: 0 from Kobra 3 profiles (fixes #7367 )
2025-01-28 15:38:44 +08:00
Christian Kunis
23a31bcad9
Update Anycubic Kobra Machine Profile(s) ( #8170 )
...
* Update Anycubic Kobra 0.4 nozzle.json
Fix incorrect parameters for M204 in start gcode
* Update Anycubic Kobra end_gcode and travel speeds
* Update Anycubic i3 Mega S start and end gcode
2025-01-25 23:39:12 +08:00
Thomas
cd4a1e01ae
Add Anycubic Kobra S1 profile ( #7987 )
...
* Prettified generic filament files
* Added Anycubic Kobra S1
* Enabled precise outer walls
2025-01-12 22:33:31 +08:00
EnderPy
776901005c
Disable priming extruders on Anycubic Kobra 2 / 3 ( #7450 )
...
* Disable priming all extruders on start for Anycubic Kobra 3
* Disable prime all extruders for Anycubic Kobra 2 Pro / Plus / Max / Neo
2024-12-01 21:44:30 +08:00
cochcoder
736d50e623
Some cleanup
2024-10-14 15:30:19 -04:00
cochcoder
36a380b9c6
Initial add of Anycubic Kobra 2 Plus, Kobra 2 Max, Kobra 2 Pro, Kobra 2 Neo, Kobra 3
2024-10-12 00:13:33 -04:00
Noisyfox
d4c0a8b982
Fix Anycubic Kobra 0.4 nozzle profile ( #6678 )
...
* Fix Anycubic Kobra 0.4 nozzle profile
2024-09-08 22:52:54 +08:00
PugBuster
fc929ebb17
Added profiles for Anycubic Kobra standard ( #6660 )
...
Profile created based on information contained in the printer's firmware and profiles recommended by the manufacturer for Cura. It has been tested on various parts including 3DBenchy with more than satisfactory results.
2024-09-07 16:56:30 +08:00
SoftFever
0459c28596
Tweak default parameters
...
1. Change default ensure_vertical_shell_thickness value back to ensure_all as suggested by @igiannakas
2. Change default sparse_infill_pattern vaule to ipCrossHatch
2024-05-29 23:07:29 +08:00
SoftFever
f13dc1fdcd
bump profiles version to 2.1, change most profiles' top_surface_pattern to monotonicline as default pattern
2024-05-22 22:54:56 +08:00
Kristian Rekstad
f10df349e5
Fix invalid nozzle_type undefined for 'Anycubic Kobra 2 0.4 nozzle' system machine ( #5159 )
...
Fix invalid nozzle_type undefined
The correct value is undefine.
Related to a comment in #3991
2024-04-29 23:55:22 +08:00
Thomas
eae2703610
Optimized PNG files ( #4294 )
...
* Optimized PNG files
* Added back hints
* Revert "Added back hints"
This reverts commit e1d3890b08
2024-03-04 22:00:47 +08:00
Thomas
2e4e1a2e0f
[Fix] Fixed error in Anycubic Kobra 2 profile using "rectilinear" sparse infill ( #3664 )
...
Fixed error in Anycubic Kobra 2 profile "rectilinear" sparce infill doesn't exist, it is "zig-zag"
2024-01-15 22:15:40 +08:00
SoftFever
5213fbfa86
Support initial_tool variable for filename format
2023-11-13 22:25:32 +08:00
Garbg
fb4fa4d769
Add warning to anycubic vyper buildplate ( #2080 )
2023-09-12 20:50:31 +08:00
SoftFever
e624632969
semm
2023-09-09 13:19:59 +08:00
SoftFever
e6fcbfae07
fix
2023-08-26 20:55:44 +08:00
SoftFever
476c05a764
Bring back PrusaSlicer history till 2.4
2023-08-26 20:05:42 +08:00
SoftFever
2a478ab4f9
post changes after merging BS1.7.4
...
Remove tracking etc..
2023-08-26 18:45:43 +08:00
SoftFever
e65b11a831
Merge remote-tracking branch 'BS/v1.7.2'
...
Signed-off-by: SoftFever <103989404+SoftFever@users.noreply.github.com>
# Conflicts:
# .github/ISSUE_TEMPLATE/bug_report.md
# .github/workflows/build_ubuntu.yml
# .gitignore
# Containerfile
# Dockerfile
# README.md
# deps/Boost/Boost.cmake
# deps/OpenEXR/OpenEXR.cmake
# deps/OpenVDB/OpenVDB.cmake
# doc/How to build - Mac OS.md
# localization/i18n/OrcaSlicer.pot
# localization/i18n/de/OrcaSlicer_de.po
# localization/i18n/en/OrcaSlicer_en.po
# localization/i18n/es/OrcaSlicer_es.po
# localization/i18n/fr/OrcaSlicer_fr.po
# localization/i18n/hu/OrcaSlicer_hu.po
# localization/i18n/it/OrcaSlicer_it.po
# localization/i18n/ja/OrcaSlicer_ja.po
# localization/i18n/list.txt
# localization/i18n/nl/OrcaSlicer_nl.po
# localization/i18n/sv/OrcaSlicer_sv.po
# localization/i18n/zh_cn/OrcaSlicer_zh_CN.po
# resources/i18n/de/BambuStudio.mo
# resources/i18n/en/BambuStudio.mo
# resources/i18n/es/BambuStudio.mo
# resources/i18n/fr/BambuStudio.mo
# resources/i18n/hu/BambuStudio.mo
# resources/i18n/it/BambuStudio.mo
# resources/i18n/ja/BambuStudio.mo
# resources/i18n/nl/BambuStudio.mo
# resources/i18n/sv/BambuStudio.mo
# resources/i18n/zh_cn/BambuStudio.mo
# resources/images/im_all_plates_stats.svg
# resources/profiles/Anker.json
# resources/profiles/Anker/filament/Generic ASA @Anker.json
# resources/profiles/Anker/filament/Generic PA @Anker.json
# resources/profiles/Anker/filament/Generic PA-CF @Anker.json
# resources/profiles/Anker/filament/Generic PC @Anker.json
# resources/profiles/Anker/filament/Generic PETG @Anker.json
# resources/profiles/Anker/filament/Generic PLA-CF @Anker.json
# resources/profiles/Anker/filament/Generic PVA @Anker.json
# resources/profiles/Anker/filament/Generic TPU @Anker.json
# resources/profiles/Anker/machine/Anker M5 0.4 nozzle.json
# resources/profiles/Anker/machine/Anker M5.json
# resources/profiles/Anker/machine/Anker M5C 0.4 nozzle.json
# resources/profiles/Anker/machine/Anker M5C.json
# resources/profiles/Anker/machine/fdm_machine_common.json
# resources/profiles/Anker/process/0.05mm Ultradetail @Anker.json
# resources/profiles/Anker/process/0.15mm Fast @Anker.json
# resources/profiles/Anker/process/0.20mm Fast @Anker.json
# resources/profiles/Anker/process/0.20mm Standard @Anker.json
# resources/profiles/Anker/process/0.25mm Fast @Anker.json
# resources/profiles/Anker/process/fdm_process_common.json
# resources/profiles/Anycubic.json
# resources/profiles/Anycubic/machine/Anycubic 4Max Pro 0.4 nozzle.json
# resources/profiles/Anycubic/machine/Anycubic 4Max Pro 2 0.4 nozzle.json
# resources/profiles/Anycubic/machine/Anycubic 4Max Pro 2.json
# resources/profiles/Anycubic/machine/Anycubic 4Max Pro.json
# resources/profiles/Anycubic/machine/Anycubic Chiron 0.4 nozzle.json
# resources/profiles/Anycubic/machine/Anycubic Chiron.json
# resources/profiles/Anycubic/machine/Anycubic Kobra 2 0.4 nozzle.json
# resources/profiles/Anycubic/machine/Anycubic Kobra Max 0.4 nozzle.json
# resources/profiles/Anycubic/machine/Anycubic Kobra Max.json
# resources/profiles/Anycubic/machine/Anycubic Vyper 0.4 nozzle.json
# resources/profiles/Anycubic/machine/Anycubic Vyper.json
# resources/profiles/Anycubic/machine/Anycubic i3 Mega S 0.4 nozzle.json
# resources/profiles/Anycubic/machine/Anycubic i3 Mega S.json
# resources/profiles/Anycubic/machine/fdm_machine_common.json
# resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic 4MaxPro2.json
# resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Chiron.json
# resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Kobra2.json
# resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic KobraMax.json
# resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Vyper.json
# resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic i3MegaS.json
# resources/profiles/Anycubic/process/0.20mm Standard @Anycubic 4MaxPro.json
# resources/profiles/Anycubic/process/0.20mm Standard @Anycubic 4MaxPro2.json
# resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Chiron.json
# resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra2.json
# resources/profiles/Anycubic/process/0.20mm Standard @Anycubic KobraMax.json
# resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Vyper.json
# resources/profiles/Anycubic/process/0.20mm Standard @Anycubic i3MegaS.json
# resources/profiles/Anycubic/process/0.30mm Draft @Anycubic 4MaxPro2.json
# resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Chiron.json
# resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Kobra2.json
# resources/profiles/Anycubic/process/0.30mm Draft @Anycubic KobraMax.json
# resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Vyper.json
# resources/profiles/Anycubic/process/0.30mm Draft @Anycubic i3MegaS.json
# resources/profiles/Anycubic/process/fdm_process_common.json
# resources/profiles/BBL.json
# resources/profiles/BBL/process/fdm_process_bbl_common.json
# resources/profiles/Creality.json
# resources/profiles/Creality/filament/fdm_filament_abs.json
# resources/profiles/Creality/filament/fdm_filament_pla.json
# resources/profiles/Creality/machine/Creality CR-10 Max 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality CR-10 Max.json
# resources/profiles/Creality/machine/Creality CR-10 V2 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality CR-10 V2.json
# resources/profiles/Creality/machine/Creality Ender-3 S1 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality Ender-3 S1 Pro 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality Ender-3 S1 Pro.json
# resources/profiles/Creality/machine/Creality Ender-3 S1.json
# resources/profiles/Creality/machine/Creality Ender-3 V2 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality Ender-3 V2.json
# resources/profiles/Creality/machine/Creality Ender-5 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality Ender-5 Plus 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality Ender-5 Plus.json
# resources/profiles/Creality/machine/Creality Ender-5 S1 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality Ender-5 S1.json
# resources/profiles/Creality/machine/Creality Ender-5.json
# resources/profiles/Creality/machine/Creality Ender-5S 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality Ender-5S.json
# resources/profiles/Creality/machine/Creality Ender-6 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality Ender-6.json
# resources/profiles/Creality/machine/fdm_creality_common.json
# resources/profiles/Creality/machine/fdm_machine_common.json
# resources/profiles/Creality/process/0.12mm Fine @Creality CR10Max.json
# resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V2.json
# resources/profiles/Creality/process/0.15mm Optimal @Creality CR10Max.json
# resources/profiles/Creality/process/0.15mm Optimal @Creality Ender3V2.json
# resources/profiles/Creality/process/0.16mm Optimal @Creality CR10V2.json
# resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1.json
# resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Pro.json
# resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5.json
# resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5Plus.json
# resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S.json
# resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S1.json
# resources/profiles/Creality/process/0.16mm Optimal @Creality Ender6.json
# resources/profiles/Creality/process/0.20mm Standard @Creality CR10Max.json
# resources/profiles/Creality/process/0.20mm Standard @Creality CR10V2.json
# resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1.json
# resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Pro.json
# resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V2.json
# resources/profiles/Creality/process/0.20mm Standard @Creality Ender5.json
# resources/profiles/Creality/process/0.20mm Standard @Creality Ender5Plus.json
# resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S.json
# resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S1.json
# resources/profiles/Creality/process/0.20mm Standard @Creality Ender6.json
# resources/profiles/Creality/process/0.24mm Draft @Creality CR10Max.json
# resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V2.json
# resources/profiles/Creality/process/0.24mm Draft @Creality.json
# resources/profiles/Creality/process/fdm_process_creality_common.json
# resources/profiles/Custom/filament/My Generic PETG.json
# resources/profiles/Custom/filament/My Generic PLA.json
# resources/profiles/Elegoo.json
# resources/profiles/Elegoo/filament/fdm_filament_common.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 2 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 2.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 2D 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 2D.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 2S 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 2S.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 3 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 3 Max 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 3 Max.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 3 Plus 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 3 Plus.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 3 Pro 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 3 Pro.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 3.json
# resources/profiles/Elegoo/machine/Elegoo Neptune X 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune X.json
# resources/profiles/Elegoo/machine/Elegoo Neptune.json
# resources/profiles/Elegoo/machine/fdm_machine_common.json
# resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune.json
# resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune2.json
# resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune2D.json
# resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune2S.json
# resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune3.json
# resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune3Max.json
# resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune3Plus.json
# resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo Neptune3Pro.json
# resources/profiles/Elegoo/process/0.08mm Extra Fine @Elegoo NeptuneX.json
# resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune.json
# resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune2.json
# resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune2D.json
# resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune2S.json
# resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune3.json
# resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune3Max.json
# resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune3Plus.json
# resources/profiles/Elegoo/process/0.12mm Fine @Elegoo Neptune3Pro.json
# resources/profiles/Elegoo/process/0.12mm Fine @Elegoo NeptuneX.json
# resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune.json
# resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune2.json
# resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune2D.json
# resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune2S.json
# resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune3.json
# resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune3Max.json
# resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune3Plus.json
# resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo Neptune3Pro.json
# resources/profiles/Elegoo/process/0.16mm Optimal @Elegoo NeptuneX.json
# resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune.json
# resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune2.json
# resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune2D.json
# resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune2S.json
# resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune3.json
# resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune3Max.json
# resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune3Plus.json
# resources/profiles/Elegoo/process/0.20mm Standard @Elegoo Neptune3Pro.json
# resources/profiles/Elegoo/process/0.20mm Standard @Elegoo NeptuneX.json
# resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune.json
# resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune2.json
# resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune2D.json
# resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune2S.json
# resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune3.json
# resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune3Max.json
# resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune3Plus.json
# resources/profiles/Elegoo/process/0.24mm Draft @Elegoo Neptune3Pro.json
# resources/profiles/Elegoo/process/0.24mm Draft @Elegoo NeptuneX.json
# resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune.json
# resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune2.json
# resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune2D.json
# resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune2S.json
# resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune3.json
# resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune3Max.json
# resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune3Plus.json
# resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo Neptune3Pro.json
# resources/profiles/Elegoo/process/0.28mm Extra Draft @Elegoo NeptuneX.json
# resources/profiles/Prusa.json
# resources/profiles/Prusa/filament/fdm_filament_common.json
# resources/profiles/Prusa/machine/Prusa MINI 0.4 nozzle.json
# resources/profiles/Prusa/machine/Prusa MINI.json
# resources/profiles/Prusa/machine/Prusa MK3S 0.4 nozzle.json
# resources/profiles/Prusa/machine/Prusa MK3S.json
# resources/profiles/Prusa/machine/fdm_machine_common.json
# resources/profiles/Prusa/process/0.20mm Standard @MINI.json
# resources/profiles/Prusa/process/0.20mm Standard @MK3S.json
# resources/profiles/Qidi.json
# resources/profiles/Qidi/filament/fdm_filament_abs.json
# resources/profiles/Qidi/filament/fdm_filament_asa.json
# resources/profiles/Qidi/filament/fdm_filament_common.json
# resources/profiles/Qidi/filament/fdm_filament_pa.json
# resources/profiles/Qidi/filament/fdm_filament_pc.json
# resources/profiles/Qidi/filament/fdm_filament_pet.json
# resources/profiles/Qidi/filament/fdm_filament_pla.json
# resources/profiles/Qidi/filament/fdm_filament_pva.json
# resources/profiles/Qidi/filament/fdm_filament_tpu.json
# resources/profiles/Qidi/machine/Qidi X-CF Pro 0.4 nozzle.json
# resources/profiles/Qidi/machine/Qidi X-CF Pro.json
# resources/profiles/Qidi/machine/Qidi X-Max 0.4 nozzle.json
# resources/profiles/Qidi/machine/Qidi X-Max 3 0.4 nozzle.json
# resources/profiles/Qidi/machine/Qidi X-Max 3.json
# resources/profiles/Qidi/machine/Qidi X-Max.json
# resources/profiles/Qidi/machine/Qidi X-Plus 0.4 nozzle.json
# resources/profiles/Qidi/machine/Qidi X-Plus 3 0.4 nozzle.json
# resources/profiles/Qidi/machine/Qidi X-Plus 3.json
# resources/profiles/Qidi/machine/Qidi X-Plus.json
# resources/profiles/Qidi/machine/Qidi X-Smart 3 0.4 nozzle.json
# resources/profiles/Qidi/machine/Qidi X-Smart 3.json
# resources/profiles/Qidi/machine/fdm_machine_common.json
# resources/profiles/Qidi/machine/fdm_qidi_common.json
# resources/profiles/Qidi/machine/fdm_qidi_x3_common.json
# resources/profiles/Qidi/process/0.12mm Fine @Qidi XCFPro.json
# resources/profiles/Qidi/process/0.12mm Fine @Qidi XMax.json
# resources/profiles/Qidi/process/0.12mm Fine @Qidi XMax3.json
# resources/profiles/Qidi/process/0.12mm Fine @Qidi XPlus.json
# resources/profiles/Qidi/process/0.12mm Fine @Qidi XPlus3.json
# resources/profiles/Qidi/process/0.12mm Fine @Qidi XSmart3.json
# resources/profiles/Qidi/process/0.16mm Optimal @Qidi XCFPro.json
# resources/profiles/Qidi/process/0.16mm Optimal @Qidi XMax.json
# resources/profiles/Qidi/process/0.16mm Optimal @Qidi XMax3.json
# resources/profiles/Qidi/process/0.16mm Optimal @Qidi XPlus.json
# resources/profiles/Qidi/process/0.16mm Optimal @Qidi XPlus3.json
# resources/profiles/Qidi/process/0.16mm Optimal @Qidi XSmart3.json
# resources/profiles/Qidi/process/0.20mm Standard @Qidi XCFPro.json
# resources/profiles/Qidi/process/0.20mm Standard @Qidi XMax.json
# resources/profiles/Qidi/process/0.20mm Standard @Qidi XMax3.json
# resources/profiles/Qidi/process/0.20mm Standard @Qidi XPlus.json
# resources/profiles/Qidi/process/0.20mm Standard @Qidi XPlus3.json
# resources/profiles/Qidi/process/0.20mm Standard @Qidi XSmart3.json
# resources/profiles/Qidi/process/0.25mm Draft @Qidi XCFPro.json
# resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax.json
# resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax3.json
# resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus.json
# resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus3.json
# resources/profiles/Qidi/process/0.25mm Draft @Qidi XSmart3.json
# resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XCFPro.json
# resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax.json
# resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax3.json
# resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus.json
# resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus3.json
# resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XSmart3.json
# resources/profiles/Qidi/process/fdm_process_common.json
# resources/profiles/Qidi/process/fdm_process_qidi_common.json
# resources/profiles/Qidi/process/fdm_process_qidi_x3_common.json
# resources/profiles/Tronxy/filament/Tronxy Generic ABS.json
# resources/profiles/Tronxy/process/0.12mm Fine @Tronxy.json
# resources/profiles/Tronxy/process/0.15mm Optimal @Tronxy.json
# resources/profiles/Tronxy/process/0.20mm Standard @Tronxy.json
# resources/profiles/Tronxy/process/0.24mm Draft @Tronxy.json
# resources/profiles/Voron.json
# resources/profiles/Voron/filament/Generic ABS @Voron.json
# resources/profiles/Voron/filament/Generic ASA @Voron.json
# resources/profiles/Voron/filament/Generic PA @Voron.json
# resources/profiles/Voron/filament/Generic PETG @Voron.json
# resources/profiles/Voron/filament/Generic PVA @Voron.json
# resources/profiles/Voron/filament/Voron Generic PA-CF.json
# resources/profiles/Voron/filament/Voron Generic PC.json
# resources/profiles/Voron/filament/Voron Generic PLA-CF.json
# resources/profiles/Voron/filament/Voron Generic PLA.json
# resources/profiles/Voron/filament/Voron Generic TPU.json
# resources/profiles/Voron/machine/Voron 0.1.json
# resources/profiles/Voron/machine/Voron 2.4 250.json
# resources/profiles/Voron/machine/Voron 2.4 300.json
# resources/profiles/Voron/machine/Voron 2.4 350.json
# resources/profiles/Voron/machine/Voron Trident 250.json
# resources/profiles/Voron/machine/Voron Trident 300.json
# resources/profiles/Voron/machine/Voron Trident 350.json
# resources/profiles/Voron/process/fdm_process_voron_common.json
# resources/profiles/Voxelab.json
# resources/profiles/Voxelab/filament/Generic ABS @Voxelab.json
# resources/profiles/Voxelab/filament/Generic PLA @Voxelab.json
# resources/profiles/Voxelab/filament/fdm_filament_common.json
# resources/profiles/Voxelab/machine/Voxelab Aquila X2 0.4 nozzle.json
# resources/profiles/Voxelab/machine/Voxelab Aquila X2.json
# resources/profiles/Voxelab/machine/fdm_machine_common.json
# resources/profiles/Voxelab/process/0.16mm Optimal @Voxelab AquilaX2.json
# resources/profiles/Voxelab/process/0.20mm Standard @Voxelab AquilaX2.json
# resources/web/data/text.js
# resources/web/guide/21/21.js
# resources/web/guide/24/24.js
# src/BaseException.cpp
# src/OrcaSlicer.cpp
# src/libslic3r/AppConfig.cpp
# src/libslic3r/BoundingBox.hpp
# src/libslic3r/Extruder.hpp
# src/libslic3r/Fill/Fill.cpp
# src/libslic3r/Format/bbs_3mf.cpp
# src/libslic3r/GCode.cpp
# src/libslic3r/GCode.hpp
# src/libslic3r/GCode/CoolingBuffer.cpp
# src/libslic3r/GCode/GCodeProcessor.cpp
# src/libslic3r/GCode/GCodeProcessor.hpp
# src/libslic3r/GCode/WipeTower.cpp
# src/libslic3r/GCodeWriter.cpp
# src/libslic3r/GCodeWriter.hpp
# src/libslic3r/Model.cpp
# src/libslic3r/PerimeterGenerator.cpp
# src/libslic3r/Preset.cpp
# src/libslic3r/Preset.hpp
# src/libslic3r/PresetBundle.cpp
# src/libslic3r/PresetBundle.hpp
# src/libslic3r/Print.cpp
# src/libslic3r/Print.hpp
# src/libslic3r/PrintBase.hpp
# src/libslic3r/PrintConfig.cpp
# src/libslic3r/PrintConfig.hpp
# src/libslic3r/PrintObject.cpp
# src/libslic3r/TreeSupport.cpp
# src/libslic3r/Utils.hpp
# src/mcut/CMakeLists.txt
# src/slic3r/CMakeLists.txt
# src/slic3r/GUI/3DBed.cpp
# src/slic3r/GUI/AMSMaterialsSetting.cpp
# src/slic3r/GUI/AMSMaterialsSetting.hpp
# src/slic3r/GUI/BBLTopbar.cpp
# src/slic3r/GUI/BBLTopbar.hpp
# src/slic3r/GUI/BackgroundSlicingProcess.hpp
# src/slic3r/GUI/BindDialog.cpp
# src/slic3r/GUI/ConfigManipulation.cpp
# src/slic3r/GUI/DeviceManager.cpp
# src/slic3r/GUI/Field.cpp
# src/slic3r/GUI/GLCanvas3D.cpp
# src/slic3r/GUI/GUI_App.cpp
# src/slic3r/GUI/GUI_App.hpp
# src/slic3r/GUI/GUI_Factories.cpp
# src/slic3r/GUI/GUI_Factories.hpp
# src/slic3r/GUI/GUI_ObjectList.cpp
# src/slic3r/GUI/Gizmos/GLGizmoMeshBoolean.cpp
# src/slic3r/GUI/Jobs/ArrangeJob.cpp
# src/slic3r/GUI/Jobs/FillBedJob.cpp
# src/slic3r/GUI/MainFrame.cpp
# src/slic3r/GUI/MediaPlayCtrl.cpp
# src/slic3r/GUI/Monitor.cpp
# src/slic3r/GUI/PartPlate.cpp
# src/slic3r/GUI/PartPlate.hpp
# src/slic3r/GUI/PlateSettingsDialog.cpp
# src/slic3r/GUI/PlateSettingsDialog.hpp
# src/slic3r/GUI/Plater.cpp
# src/slic3r/GUI/Plater.hpp
# src/slic3r/GUI/PresetComboBoxes.cpp
# src/slic3r/GUI/ReleaseNote.cpp
# src/slic3r/GUI/SelectMachine.cpp
# src/slic3r/GUI/StatusPanel.cpp
# src/slic3r/GUI/Tab.cpp
# src/slic3r/GUI/Widgets/Label.cpp
# src/slic3r/GUI/Widgets/Label.hpp
# src/slic3r/GUI/Widgets/SideButton.cpp
# src/slic3r/GUI/calib_dlg.cpp
# src/slic3r/GUI/calib_dlg.hpp
# src/slic3r/GUI/wxExtensions.hpp
# src/slic3r/Utils/NetworkAgent.cpp
# src/slic3r/Utils/bambu_networking.hpp
# version.inc
2023-08-26 16:13:57 +08:00
rspython
1279beb3de
add Anycubic Kobra Plus profile based on Anycubic Kobra Max. ( #1823 )
...
Co-authored-by: HANDS Richard <richard.hands@soprasteria.com>
2023-08-18 18:53:49 +08:00
SoftFever
ab9873ff55
ENH: switch ironing_type to no ironing
...
This modification is based on Orca's commits 61db1ef36961db1ef369a1bc4b3a57
2023-08-15 21:39:51 +08:00
Lee Colarelli
d98059a0ec
ENH: Add Anycubic Kobra 2.
...
This modification is based on Orca's commit abc0f1c682#1765 )
* feat: added Anycubic Kobra 2
Signed-off-by: Lee Colarelli <lee@leecolarelli.com>
* fix: corrected buildplate texture size
Signed-off-by: Lee Colarelli <lee@leecolarelli.com>
* fix: corrected max layer height
Signed-off-by: Lee Colarelli <lee@leecolarelli.com>
* fix bed model
---------
Change-Id: I442995a3e80fef680f2d9a5ae1899a8ef5625795
Signed-off-by: Lee Colarelli <lee@leecolarelli.com>
2023-08-15 21:39:51 +08:00
SoftFever
61db1ef369
misc profile fixes
2023-08-11 21:13:53 +08:00
Lee Colarelli
abc0f1c682
feat: added Anycubic Kobra 2 ( #1765 )
...
* feat: added Anycubic Kobra 2
Signed-off-by: Lee Colarelli <lee@leecolarelli.com>
* fix: corrected buildplate texture size
Signed-off-by: Lee Colarelli <lee@leecolarelli.com>
* fix: corrected max layer height
Signed-off-by: Lee Colarelli <lee@leecolarelli.com>
* fix bed model
---------
Signed-off-by: Lee Colarelli <lee@leecolarelli.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
2023-08-11 20:26:20 +08:00
xun.zhang
a39c2018d4
ENH: optimize some params for third-party printer
...
Thanks for Orca's efforts to improve third-party profiles.
This modification is based on Orca's commits afdd753db7aaefc400e1afdd753db7aaefc400e1#1641
2. Revamp Qidi X3 printer profiles
3. Turn on accel_to_decel_enable for klipper machine by default
4. Many other profiles tweaks
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I7c3ffaec5b06df61eb44b1c565bcb4a6c8de89ea
2023-08-04 18:28:42 +08:00
SoftFever
afdd753db7
tweak profiles
2023-08-03 00:47:48 +08:00
SoftFever
aaefc400e1
Tweak profiles
...
1. Fix Voron Trident printable height issue #1641
2. Revamp Qidi X3 printer profiles
3. Turn on accel_to_decel_enable for klipper machine by default
4. Many other profiles tweaks
2023-07-31 19:52:56 +08:00
salt.wei
c5d70a846e
ENH: add setting of extruder type
...
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ic126466f6b579dd6a55a1ba16a63c015d538c750
2023-07-07 17:52:43 +08:00
xun.zhang
8a34f6b606
ENH: rename filament in machine default materials
...
Change-Id: Ib5df8be29e0a4d69f3e1acb3a2f8b04134ec7bde
2023-07-07 17:29:08 +08:00
xun.zhang
ee11ca6eeb
ENH: rename third-party printers' filaments
...
Change-Id: Ie6a52f5b91cba9be83c6160f64f5d7edd113c2e9
2023-07-07 17:29:08 +08:00
salt.wei
f84d38bea1
ENH: add more creatity printer
...
Thanks OrcaSlicer. Also fix wrong
setting id in orca profile
Add one py file to check whether has duplicated setting_id
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I8461a1ae754253d8265ae5239fe91cc7ec775564
2023-07-07 17:29:08 +08:00
salt.wei
b0e740ef22
ENH: pick more anycubic printer from orca
...
Thanks OrcaSlicer, also fix wrong setting id
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I017ee110e18e5e84d1b21113908b43e286fd6d4e
2023-07-07 17:29:08 +08:00
salt.wei
5d36231752
ENH: add prusa MK3 and mini printer
...
Thanks orca-slicer. Also fix the wrong
setting id from orca.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I68363dbc2a261a6ae13ac5569972446e032e77f0
2023-07-07 17:29:08 +08:00
fr3ak2402
7809fabcbf
add Raise3D printer profiles ( #1087 )
...
* add Raise3D printer profiles
Raise3D Pro3
Raise3D Pro3 Plus
* add more Sovol profiles
Sovol SV06
Sovol SV06 Plus
* Add & modify Anycubic profiles
Anycubic Chiron
Anycubic Kobra Max
Anycubic Vyper process 0.15mm & 0.30mm
2023-05-20 19:33:16 +08:00
fr3ak2402
e6f3427bb9
add Anycubic Vyper profile ( #1062 )
2023-05-14 21:10:55 +08:00
fr3ak2402
37e105c1e8
Improvement Artillery Sidewinder X2 Profile & other small changes ( #1053 )
...
* Add & revise FLSun Profile
FLSun Q5
FLSun QQ-S Pro
* Patch Artillery Sidewinder X2 profile
revision speed parameters
revision start & end code
* change Anycubic 4Max Pro image
* Adjustments to the profile of the Anycubic 4Max Pro
Preparation for adding more Anycubic printers
* add more Anycubic profiles
2023-05-14 09:18:02 +08:00
SoftFever
c81ca8c9d7
profile cover image reorg
2023-05-07 23:52:11 +08:00
