For PA-cf material, forcing cooling for all outer
wall and using lower fan speed for infill and inner
wall can get more high strength.
Add this cooling strategy.
When set overhang fan threshold to be 0%, then bridge
and all outer wall will be force to cool with
the overhang fan speed.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ideed1ac8690f1eeb68aad760678db76bb4dae8ec
See the new requirement of the latest update at
github issue #317
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I68c9922a272b1d426126a531bfdee7a4f7e53620
This patch can make sure that the cooling fan will not
be enabled during change fimanet.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I9f480b99116d62fe7522233b69b5bca209663821
hrc determine which filament could be printed by the nozzle
if the filament required hrc smaller than the nozzle hrc
the fillament could be printed
either of it be zero means use other printers
or user want to print it anyway
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ic32dfaed4f9c80774a670c362de612254f3a5ed0
In some complicated cases or irregular shape, the direction
of external bridge is not good when calculated automaticlly.
So user may use modifier to change bridge direction.
This is handling for github issue #340
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I3baf313f47925fa7e6aa087f5896b0af560f902d
When fuzzy skin is enabled, show more related settings
so that user can tune.
This is enhancement for github issue #44
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I35e3883983b62117c4306dd894a04edd40c70f8e
We discover a good quaility interface can help remove support. When
enabling interface, directly generating circles from overhang polygons
gives fairly good quality.
Change-Id: I5d347fa7abaacea839650b6fd3a8c2c73abd5e56
(cherry picked from commit 474cbf7d59beda63e9ef1ec8b52636f2674811c7)
So we can set lower acceleration for outer wall now.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ib4728bf16f6c540afca62f423c8aab4c9e0c4d02
Some sentenses are only slightly different which is
unnecessary. Making them the same can save a
translation and also keep consistency.
Change-Id: Ie59c0bf788a31ee0c6a0d792af7b3d532fe34f75
(cherry picked from commit eb69195569518e3be61e5a8887ea317fbe3e7302)
The first layer order should be outer wall first,
when the object indeed has brim.
So must regenerate wall when switch to manual brim.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I44fd0686b7a0e836337f5e6ff8ee311ea0c7bceb
Change-Id: I48f34039635803c3f1cee4cc2c853a0ffa5b451a
Signed-off-by: Stone Li <stone.li@bambulab.com>
(cherry picked from commit 387ba2a5aac05d3b3af0923f88415188ae8cb44e)
Signed-off-by: Stone Li <stone.li@bambulab.com>
This reverts commit ccf1746530a6f68d38a9b6714e70a0acdbec5b8c.
Reason for revert: multi color printing has problem
Change-Id: Ibc53b99a715b987ee447d7c3b03407de2790abaf
Also change words for extruder clearance parameters.
Change-Id: I736fd9049d184c140b33078d78f764b4fe172765
(cherry picked from commit e70c0c0ea133cffa5788efbfc9633332b196e8df)
1. use strict ordering to ensure the printing order is right
2. reduce height-to-lid to 100mm considering towline is lower than lid
and may collid with objects
TODO: printing brim may still collide, need to subtract inflated boundary of
others during brim generation
Change-Id: Icf0cba10c579d28fabd97764c1b3abec267ebd9b
(cherry picked from commit 46c6f5ff94488b2f4481bf1d34555f4a7c45e135)
This may cause tall objects be printed before short ones. There are two
possible solutions:
1. do strict ordering only when y-overlap is large enough (the one
chosen in this commit)
2. when considering vertical collision with rod, the actual expansion
can be much smaller (because the rod is only slightly off extruder).
But this solution requires an extra parameter. Let's hold it for a
while.
Change-Id: Icc9a4796d49dad93cbcc20d4103e641a48886e5e
(cherry picked from commit 6a958b1fa9e58e4ca3be63b4918da77bcdc53314)
(cherry picked from commit ceff67789c27ea576afd663a2e5bae9a10241728)
1. Previous logic can't guarantee left-to-right printing order, so
toolhead may crash on the right side. In the new algorithm printing
order is guaranteed.
2. Clearance radius should be the max of 3 directions (left, bottom,
up), not including right, otherwise collision may happen on bottom or
up directions.
3. Add is_extrusion_cali_object property to handle extrusion brim
overlap better.
Change-Id: I44868b9925d983f5cca0c31d35dfa28d895fadbf
The original patch can't fix empty layer issue
Revert.
This reverts commit 152a650fb80a84523e977b15f5f30d28837d80e9.
Change-Id: Ib6d47ac981fca24ca953b45068703bbcd231cf95
Copied objects share extrusion paths but they should be treated
seperately.
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: I891c70d261a2fa5b198ec776694d74eeb8fd987f
Revert "ENH: save uniform scale to an app_config item" Revert "ENH: do uniform scale if uniform_scale is true"
Change-Id: I069baecec143e77d796247f29cd5478b877971fb
(cherry picked from commit c7cf95cf5c365f314a53fead6612fac84a0a5f71)
This is a bug when printing multi filament
When the filament changing is finished before printing
first layer, the temperature should be resumed to be
initial layer nozzle temperature as well.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I82231f8a47fac1995d8f1ba12c4f7797afce2891
Copied objects share extrusion paths but they should be treated
seperately.
Thanks hisptoot for the fix.
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: I24d3050df7d284e92fc50a0213023a43ee8c529c
Add paint-on support on vertical faces of slender rods
Jira: Studio/STIDIO-970
Change-Id: If280b570a8076059b5583f385ba6517bf305723b
(cherry picked from commit 6832ee98ac146421c061fa90840c2751c3b3d875)
