1. set wipe tower real height
2. fix wipe tower small arc error
3. add rib_width constraint to ensure that the rib wall of the wipetower are attached to the infill.
jira: STUDIO-10540
Change-Id: Idfdc809f0236121d98587ac2a09a2ebbf5caf945
(cherry picked from commit 3a7dcfd23249571224a4d538c55907a0a5c6154d)
1.Also add a new field to mark whether enable high low temp mix
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I208e0e7a4ce75feccc8659ecf940447e591d9505
(cherry picked from commit e79ba2f1ec64953100319a3d86ef9105cc7c3567)
and reduce the travel speed inside the wipe_tower
jira: none
Change-Id: I3b07ee62623e0cdc2f1824f0011f95776020bee1
(cherry picked from commit 1aad582e08229fad1f935e257c1335dcfdbe406c)
2. use most used extruder for timelapse without wipe tower
3. apply retract_when_changing_layer for multi_extruder
jira: none
Change-Id: I4ff00573fd8a6ee9fa42877e3e7056d547e4d864
(cherry picked from commit 4715fa14edf2bdfc1170b0461da699903a3078a4)
for X and P machine
2. remove lift and retract in filament_change_gcode and layer_change_gcode
jira: none
Change-Id: I3da2d3ac7f0100d1963dcbb1228323666a060534
(cherry picked from commit 5c3d804b9fbe65532d2717e60b5f1143710b0ecf)
1. support traditional timelapse for H2D when printing by object
2. insert timelapse gcode when close wipe tower
3. remove hard gcode before filament gcode
jira: none
Change-Id: Ib56c21b1f07832f2cbc8ba5ab7f2e8653b3105bf
(cherry picked from commit 7613474cefd210685d16a5585608c0c7cb7efa95)
(cherry picked from commit fff787345625a0031934e609b1b3709e39decd4a)
and modify the path of travel to the wipe_tower after flushing
jira:none
Change-Id: Id4b0571fd12372c59cf522c13e256c7cc4ac3565
(cherry picked from commit 17771d0fbf753dd22411ce490586958bd643264e)
and add most used_extruder for print by object
jira:none
Change-Id: I021069e865992828b098d73c0d704ba7edbd55d8
(cherry picked from commit ae62f7b8e4b4258318c0d941963eddfb70e86c15)
1.Compare stats of AutoForFlush with other filament map modes
2.Refine the function signature of filament group
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Iec2aff069d8c44343df8b82f045c61354c7d1c2a
(cherry picked from commit 95e49986f32070756182a31843f4f37f863f07ac)
1.Should get value by filament id instead of extruder id
2.Fix many other issues caused by incorrect usage
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I3278d7de0f8976a97c9e5ccef80bba4a58553f5a
(cherry picked from commit 30c51dd1171fc16ba778308745fab2eb246aedd0)
(cherry picked from commit e9027478f8948352d99d33519994b044ca18a65a)
1. Set shared retract length size to 2. Filaments in one extruder
shares the param
2. Move toolchange function before unretract function in append_tcr
to get the correct logic
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I215a542ce36107071fad39f1f9e30234fb19a3a0
(cherry picked from commit c4ef6e9e0950c58a8c5f612662145c6a256884ad)
Jira: none
while there is no non support filament
set first print filament to initial_no_support_extruder
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: If2fee560772c9a7cfa1855efc85116fb7df04760
(cherry picked from commit 361d7489929dfc1a3b266951f0302f25cf48edcc)
1.Only do reorder if requseted.In by object mode,we only need
to collect the filaments in the object for filament grouping
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id88f2449c6d3c5d45b9ff87513308d997fa72da1
(cherry picked from commit 7b5818fe6c538123373243ec8dfedc3c2fa68e6d)
to support different printable height of multi_extruder
jira:none
Change-Id: I265c65e15fc8f598c3456556557bb6977b5de820
(cherry picked from commit 933adbaaf0eaf361e39f131dd5536dca91214d43)
1. Machine with multi extruder should set length of extruder offset
to extruder num
2. Register retract_restart_extra
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ic3eb324cb91dc70b091c8922936d2709c361cc38
(cherry picked from commit 13df1ee7bab2bf13c9f5ffca6ad1228ff48e885e)
