* Update all Mk4 pla filament to have proper ramming parameters
* Update all Mk4 PETG filament to have proper ramming parameters
* Update all Mk4 ABS filament to have proper ramming parameters
---------
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
* Ported ramming configuration improvements from prusa slicer: Hold cmd to move all values, more granular time settings and higher maximum values.
* improve variable name, change space
* Move the label under the ramming chart
* Experimenting with values label for ramming chart
* Fix the label position and make the background 20% transparent
* update the way the multiline label is done
* reorder commands
---------
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
* Large images optimizations
* Add image and update instructions for junction deviation
Added a new image illustrating the printer jerk limitation setting and updated the calibration documentation to clarify steps for setting Maximum Junction Deviation. Improved formatting and corrected a typo in the instructions.
* Update README links to Wiki
* Fix Wiki image paths + Typos
* Fixes, typos and Infill improvements
* Update VFA calibration guide and add resonance avoidance
Expanded the VFA calibration documentation with more detailed explanations of VFA causes, the VFA Speed Test, and how to use the Resonance Avoidance Speed Range. Added a new image illustrating the resonance avoidance configuration.
* Add surface density setting to top/bottom shells docs
* Ironing Wiki Wip
* Wall and surfaces wiki wip
* Fix top/bottom link
* Better topbottom reddirect
* bridging wiki wip
* Fix TOP bottom
* Wall wiki wip
* strength advanced wiki wip
* speed advance renaming
* inital speed wiki wip
* Other Layer Speed Wiki Wip...
* Speed overhang Wiki WIP
* Travel speed wiki wip
* Speed acceleration wiki wip
* Update speed_settings_initial_layer_speed.md
* Jerk Wiki Wip
* support wiki wip
* Raft wiki wip
* support filamnet wiki wip
* Support ironing wiki wip
* Support advanced Wiki Wip
* Tree wiki wip
* STL images optimizations
* Prime tower wiki wip
* Update PA line diagram images
Were bigger than original used to crop this ones.
* Ooze wiki wip
* Flush wiki wip
* Image optimizatios
* Clarify TPMS-D infill description
Updated the TPMS-D infill section to specify that it refers to the Schwarz Diamond surface, improving clarity for users. Also updated the infill calculator spreadsheet.
Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com>
* images+++
* Multimaterial advanced Wiki Wip
* Skirt Wiki Wip
* Brim wiki wip
* Add Junction Deviation formula to documentation
Included the mathematical formula for Junction Deviation in the cornering calibration documentation to clarify its calculation.
Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com>
* Others special mode Wiki Wip
Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com>
* Fix links
* Fill Multiline infill Wiki
Introduced a new section in the infill documentation describing the Fill Multiline setting, its differences from other slicers, and its use cases. Added a comparison table and illustrative GIF to clarify how OrcaSlicer maintains density and material usage when using multiple infill lines.
* Multiline infill wiki update
Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com>
* Multiline Tab.cpp
* Gcode output Wiki Wip
* Others wiki wips
* Home quality
* Add process links in home
* Quality Basic Missing descriptions
* Update quality_settings_bridging.md
* basic desc
* basic advance strentgth
* Basic speed
* basic other speeds
* Fix link
* Update speed_settings_overhang_speed.md
* Update speed_settings_travel.md
* Update speed_settings_acceleration.md
* Fix
* Expand documentation for acceleration and jerk settings
* Support wiki
* Raft wiki
* Support wiki desc
* Prime tower wiki
* Multimaterial wiki desc
* Filament to features wiki
* Ooze improve
* Fix duplicate text
* Fix typo in volumetric speed calibration guide
Corrected 'promoted' to 'prompted' in the instructions for entering test settings in the volumetric speed calibration documentation.
* centeres image
* Overlapping gif
* Others wiki basic desc
* Clarify retraction calibration recommendation
Expanded the explanation for calibrating retraction settings, specifying that it should be done after Flow and Pressure Advance calibration for optimal extrusion setup.
Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com>
* Links in Readme + minor change
Refined links and formatting in README for better navigation. Expanded wall printing order section in quality settings documentation to clarify Inner/Outer, Inner/Outer/Inner, and Outer/Inner modes. Updated calibration guide images and formatting for improved clarity.
* Add SVG icons to infill pattern comparison table
* Delete doc/images/gui directory
remplaced with GUI
* Create process-preset-full.png
---------
Co-authored-by: Rodrigo <162915171+RF47@users.noreply.github.com>
* GUI: Add filament notes to material selector tooltip
Enhances material selector tooltip to display filament notes from preset configuration.
Adds automatic truncation for notes longer than 200 characters with ellipsis.
Improves user experience by providing material context directly in tooltip.
Fixes#10037
* GUI: Add filament notes to material selector tooltip
Enhances material selector tooltip to display filament notes from preset configuration.
Adds automatic truncation for notes longer than 200 characters with ellipsis.
Improves user experience by providing material context directly in tooltip.
Fixes#10037
* GUI: Fix tooltip display for unsaved profile notes
* chore: Updated the documentation on how to build OrcaSlicer, adding instructions for macOS and Linux, and improving the structure and clarity of the sections.
* chore: Improve structure and clarity of the build instructions for macOS and Linux
* smooth tpmsd
Changed the number of initial segments in the make_waves function from 4 to 16 for finer wave discretization. This should improve the accuracy of the generated wave polylines.
* Update param_tpmsd.svg
* Infill Line Multiplier
* Modular Offset Function
* Lightning multiline
* Crosshatch Multiline
ipCrosshatch
* cleaning
Cleaning
clean2
* 3d Honeycomb
cut poliline ends
* Fill Tpmsd Multiline
Fill Tpmsd Multiline
* Update Multiline function
multiline funcion simplify
* Update FillTpmsD
* FillHoneycomb
* Update src/libslic3r/PrintConfig.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Fix Honeycomb Multiline
Simplify polylines in honeycomb infill generation
* Improve multiline infill support and pattern simplification
Moved multiline infill application after pattern translation and simplification in Fill3DHoneycomb, and added multiline support to FillAdaptive. Updated honeycomb and 3D honeycomb infill to simplify polylines to 5x line width. Extended GUI and config to support multiline for Adaptive Cubic infill pattern and clarified max value comment.
minimum changes
Co-Authored-By: Ian Bassi <12130714+ianalexis@users.noreply.github.com>
* Increase multiline fill spacing in honeycomb infill
Adjusts the spacing parameter in the multiline_fill function to 1.1 times the original spacing, potentially improving infill distribution or print quality.
* Refine fill_multiline tooltip and pattern support logic
Updated the tooltip for the 'fill_multiline' parameter to improve clarity and punctuation. Refactored the logic in ConfigManipulation.cpp to clarify which infill patterns support multiline infill.
* better management of non supported infill patterns
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
Co-authored-by: Ian Bassi <12130714+ianalexis@users.noreply.github.com>
* Enable toggling of surface density and overlap options
Added toggling for 'top_surface_density', 'bottom_surface_density', and 'top_bottom_infill_wall_overlap' fields in based on shell presence.
* un toggle shell overlapping option
---------
Co-authored-by: Rodrigo <162915171+RF47@users.noreply.github.com>
* fix: added skin_infill_line_width and skeleton_infill_line_width to print profiles as nozzle_size is greater than 0.4
* fix: update version to 0.0.0.1 in multiple process profiles
* fix: Set the default value for the skeleton infill width to 0 fork skipping the min check
* fix: Update default value for skeleton infill line width to 100%
Update fdm_marlin_common.json
fix for time discrepancy, ;LAYER_COUNT was missing which made it impossible for the anker M5/M5C to have a correct predicted time.
* Create top surface density option
* Update tooltip
* Specify what 0% top infill means
* Add density for bottom layers
* Discourage users from using top/bottom density incorrectly
* Fix percent don't need translation
* Fix incorrect indentation
---------
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
* SPE-2405: Add Zig Zag infill that is rectilinear infill but with a consistent pattern between layers.
This Zig Zag infill is inspired by the Zig Zag infill in Cura.
Change-Id: I798affa99f4b5c3bd67f47643e67530fb7c3e0cb
(cherry picked from commit 2808d04d5deef6f99f9618648e46f11de03efc98)
* Add Cross zag and locked-zag for shoes
Ported from BambuStudio
* wip
* sparse infill roratation template
* solid_infill_rotate_template
* remove rotate_solid_infill_direction
* hide sparse infill rotation template for non applicable infill pattern
* hide solid_infill_rotate_template for non supported solid infill patterns
* update icon
* support empty string for ConfigOptionFloats deserialize
* fix build errors
---------
Co-authored-by: Lukáš Hejl <hejl.lukas@gmail.com>
