* fix typo and tooltip
* merge pot po german
* fix more
* merge with bambu master pot
* fix po to Softfever
* fix
* build new Softfever pot mege with xx.po
* enable hints in german again
* Force using of monotonic infill pattern for internal solid infill to get rid of redundant gap fills.
* Fix an issue "Patterntype for Solid and top layer #134"
Add the option to use non-relative extrusion in printer config screen. Some extruders do not play well with relative extrusion...
Remove reference to multi-extruder
Remove reference to multi-extruder
change g-code comment for M83 relative extrusion
changed comment for M83
Remove commented line of code
In this specific case, we delete the old line of code because it refers to a variable that was deleted from the rest of the code (RELATIVE_E_AXIS)
* fix more colors
* fix more color on Mac
Signed-off-by: SoftFever <103989404+SoftFever@users.noreply.github.com>
* fix new windows issue on Mac
Signed-off-by: SoftFever <103989404+SoftFever@users.noreply.github.com>
#137
* Support more PrusaSlicer variables
Signed-off-by: SoftFever <103989404+SoftFever@users.noreply.github.com>
* enhance compatibility: bed_shape and wipe_start_x
* fix more color
* build deps
* only build for PR
Signed-off-by: SoftFever <softfeverever@gmail.com>
Signed-off-by: SoftFever <103989404+SoftFever@users.noreply.github.com>
Signed-off-by: SoftFever <softfeverever@gmail.com>
Clipper2 doesn't solve wrong line issue for some
specific model and sometimes has performance issue.
Return to clipper1.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I906f8b81083ac8c03ecc9fe3e8d2ade20be95c04
wxWidgets on Linux uses GStreamer as its back-end for wxMediaCtrl, which
doesn't have a bambu: URI handler. On Windows, this is handled by a Windows
Media subsystem plugin, and on Mac, this is handled with a BambuPlayer
class. Luckily, the libBambuSource.so binary that is distributed with the
network plugin package already contains support for receiving h.264 data
from the network, and the API is the same as is used by the tiny
bambusource.exe binary on Windows; we glue this into a GStreamer source
plugin that registers a URI handler for bambu:.
To make this work, we make a few additional changes elsewhere. GStreamer
seems to have trouble rendering an Xv overlay onto a 32bpp X visual, but
Bambu Slicer seems to request a 32bpp visual for some background
transparency in the Notebook; it doesn't seem to use it in an interesting
way on Linux, though, so we remove that request for transparency to allow
Bambu Studio to render to a 24bpp visual. The media controller
infrastructure also makes a few assumptions about when sizing information
can be queried from a wxMediaCtrl backend that do not hold true on Linux; we
either fix those assumptions, or fake them out, as needed. We also make a
few changes needed to successfully compile C.
This has only been tested with the GStreamer backend for wxWidgets --
notably, not the GStreamer-play backend (these are, astonishingly, two
different things!). If you find that this seems not to work, consider
*un*installing the libgstreamer-plugins-bad1.0-dev package and then
rebuilding wxWidgets.
On Linux, wxGTK by default attempts to use EGL if it is available on the
system, rather than GLX. Unfortunately, the ancient version of GLEW that we
packaged in did not support EGL, and even if it did, the configuration was
not set up to enable EGL. To solve this, we:
* upgrade GLEW to version 2.2.0, from upstream GitHub
* modify the Bambu build process to enforce that we use GLEW from the
built dependency
* remove the "extra" even older GLEW that was packaged
* modify GLEW's CMake configuration to enable EGL support when it is
available on the system (using the same test as wxWidgets uses to decide
whether to enable EGL support); if EGL isn't available at compile time,
both GLEW and wxWidgets will fall back on GLX
Note that you probably will have to blow away your CMakeCache for this to
work correctly -- otherwise, you may end up with the system GLEW, if you
have one installed (which is probably not what you want -- on Ubuntu, the
system GLEW is GLX, not EGL).
* Remove limitations for bed_exclude_area
Was limited to 256mm, not ractical to exlcude half of the bed (for instance on IDEX printers)
* Add RatRig V-Cast printer
Add RatRig V-Cast printer
Add RatRig V-Cast printer
Add RatRig V-Cast printer
Clipper2 doesn't solve wrong line issue for some
specific model and sometimes has performance issue.
Return to clipper1.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I906f8b81083ac8c03ecc9fe3e8d2ade20be95c04
1.add pauseprint will not cause preview page refresh
2.fix add custom Gcode window and jump to layer window cannot input after reslice
Change-Id: I4f75457b6d6172080715393c975169c8f16464b9
