Updating position to gcode writer in wipe tower
miss plate offset.
This is handling for github issue #2256
github: github issue #2256
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I915591ee919d10bb5bd2c2dcd5f1e98fd4b66503
* First working brim ear impl, ported from SuperSlicer
* Make brim ears configurable
* Generate ears only if ear size > 0
* Fix `Polygon::convex_points` as well as brim ear max angle
* Fix another error in `Polygon::convex_points` and `Polygon::concave_points`
* Apply brim ears to inner brims as well
* tweak hide and disable condition a bit
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
A new extrusion role - erInternalBridgeInfill is introduced.
SuperSlicer's implementation is referenced.
Signed-off-by: SoftFever <103989404+SoftFever@users.noreply.github.com>
Previously holes of enforcer_polygons was taken as contours,
which caused enforcers inside a hole were too large.
Jira: STUDIO-3877
Change-Id: If38c34e2469b822012a2ed0b082783563fe99228
Addind only the include dirs is wrong. The cmake boost_headeronly
library contains more settings.
Without adding the cmake boost_headeronly library, the compilation of
imgui is missing the defines for the boost library (f.e.
BOOST_LOG_DYN_LINK) and it will result in linker errors.
Co-authored-by: SoftFever <softfeverever@gmail.com>
1. Changed printing speed for all PA tests, where the speed will be calculated by max(100, outer_wall_speed) with consideration of max_volumetric_speed.
2. PA tower now uses the classic wall generator.
#1616
* First working conical overhang impl
* Add settings for Make overhang printable
* Added an Advanced setting to the Quality menu for Make overhang printable
* Allow toggling the feature and adjusting the angle threshold
* Retain recesses in the bottom of the model when "Make Overhangs Printable" is turned on
* Add settings for Make overhang printable hole size
* Allow disabling conical overhang per modifier
* Should check upper layer instead
* Skip unnecessary layers
* Apply conical overhang before any size compensation
which fixs the `lslices` not being updated issue and also the elephant foot compensation
* 1. Fix an issue that changing make_overhang_printable related parameters won't clear caches properly.
2. Tweak the logic of make_overhang_printable parameter so that it works for per region/object/print level. Remove make_overhang_printable_disable parameter.
* Change default make_overhang_printable_angle to 55
* One more missing commit
* 1. Skip checking default_region_config()->make_overhang_printable
2. Handle make_overhang_printable_angle and make_overhang_printable_hole_size value change
---------
Co-authored-by: David Bern <odie5533@users.noreply.github.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Port single wall on top surface from classic wall generator to Arachne
* Move the surface split code into a separate function to be shared between classic and Arachne. This also adds bridge detection to Arachne as well.
* Remove unwanted infills
* Fix insets calculating
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Calculate extrusion width %s as a function of nozzle width, not layer height
* handled more width conversions
* more missing percent handling
* even more missed percent handling
* even more more extrusion % handling
* some fixes
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
