LovelyTwo
3359dadd32
Port automatic hole to polyhole conversion from SuperSlicer
...
Co-authored-by: supermerill <merill@free.fr>
2023-10-07 10:15:21 +11:00
Noisyfox
993e653c54
Fix crash when switching infill pattern between cubic & adaptive cubic
...
Cheery picked from prusa3d/PrusaSlicer@2b0a7ccb2c
2023-10-06 23:09:01 +08:00
Noisyfox
b41fdcdc50
Fix issue with overhang-extra-perimeter on complicated multi-part models ( #2326 )
2023-10-06 22:12:11 +08:00
Ocraftyone
ee9f651511
Fix M141 S0 at end of gcode ( #2328 )
...
* remove hardcoded set chamber temp gcode
* Revert "remove hardcoded set chamber temp gcode"
This reverts commit 8fc1f4a38113087a8fb11901981ca8c9cfdf7777.
* disable heated chamber only if chamber is used/defined
2023-10-05 22:02:15 +08:00
Ocraftyone
709504a2d1
toggle visibility of ironing_pattern on selection of ironing type ( #2321 )
...
* toggle visibility of ironing_pattern on selection of ironing type
* add a tooltip to ironing_pattern
2023-10-05 20:14:53 +08:00
Noisyfox
cf8052cbfd
Fix crash when use adaptive cubic sparse infill ( #2315 ) ( #2318 )
2023-10-05 20:13:22 +08:00
Ocraftyone
a523979ac3
add ironing angle ( #2320 )
2023-10-04 22:48:35 +08:00
Ioannis Giannakas
466538e44e
Inner-Outer-Inner mode - additional fix where an external perimeter is shared between multiple islands in the same ordered_extrusions perimeter list ( #2276 )
...
* Updated inner outer inner algorithm
* debug msg
* Revert "debug msg"
This reverts commit 32ce6f209626c56912f8
2023-10-03 23:22:33 +08:00
SoftFever
4cb84b6c73
Fix during_print_exhaust_fan_speed_num error
2023-10-03 23:05:55 +08:00
bitingsock
bda8249e06
Add elephant foot compensation over multiple layers ( #2254 )
...
#https://github.com/prusa3d/PrusaSlicer/pull/10976
Co-authored-by: Roberto Mozzicato <bitblasters@gmail.com>
2023-09-30 18:12:12 +08:00
SoftFever
d6c4c4b46b
fix crashes
...
Signed-off-by: SoftFever <softfeverever@gmail.com>
2023-09-30 09:52:20 +08:00
SoftFever
59bab91da9
Merge branch 'merge-upstream'
...
Signed-off-by: SoftFever <softfeverever@gmail.com>
# Conflicts:
# src/libslic3r/Preset.cpp
# src/libslic3r/PrintConfig.cpp
# src/libslic3r/PrintConfig.hpp
2023-09-30 09:51:56 +08:00
niklasb
7a7187f9ed
Add: option to setup a cost per hour per printer #571 ( #2247 )
2023-09-29 23:44:05 +08:00
Noisyfox
761db8537e
Update error message to make it a bit more informative ( #2249 )
2023-09-29 23:39:58 +08:00
Noisyfox
ee0e6a7227
Port "Extend sparse infill" from Prusa ( #2134 )
...
* Remove BambuLab's implementation of solid infill bridging enhancement
, will use Prusa's instead
* Port "Extend sparse infill" from Prusa
* Improve anchoring by shifting the lines half-spacing
* Add missing fill patterns
* Improve anchoring by keeping fine details
* Make sure the opposite directions do not cancel each other
---------
Co-authored-by: Pavel Mikus <pavel.mikus.mail@seznam.cz>
2023-09-29 23:39:12 +08:00
SoftFever
4fd2177625
fix errors
...
Signed-off-by: SoftFever <softfeverever@gmail.com>
2023-09-29 19:47:13 +08:00
SoftFever
b8172316b8
Merge branch 'v1.7.2-remote'
...
Signed-off-by: SoftFever <softfeverever@gmail.com>
# Conflicts:
# deps/ZLIB/ZLIB.cmake
# localization/i18n/OrcaSlicer.pot
# localization/i18n/de/OrcaSlicer_de.po
# localization/i18n/en/OrcaSlicer_en.po
# localization/i18n/es/OrcaSlicer_es.po
# localization/i18n/fr/OrcaSlicer_fr.po
# localization/i18n/hu/OrcaSlicer_hu.po
# localization/i18n/it/OrcaSlicer_it.po
# localization/i18n/ja/OrcaSlicer_ja.po
# localization/i18n/ko/OrcaSlicer_ko.po
# localization/i18n/list.txt
# localization/i18n/nl/OrcaSlicer_nl.po
# localization/i18n/sv/OrcaSlicer_sv.po
# localization/i18n/zh_cn/OrcaSlicer_zh_CN.po
# resources/calib/PressureAdvance/pa_pattern.3mf
# resources/handy_models/Disc.stl
# resources/i18n/de/BambuStudio.mo
# resources/i18n/en/BambuStudio.mo
# resources/i18n/es/BambuStudio.mo
# resources/i18n/fr/BambuStudio.mo
# resources/i18n/hu/BambuStudio.mo
# resources/i18n/it/BambuStudio.mo
# resources/i18n/ja/BambuStudio.mo
# resources/i18n/ko/BambuStudio.mo
# resources/i18n/nl/BambuStudio.mo
# resources/i18n/sv/BambuStudio.mo
# resources/i18n/zh_cn/BambuStudio.mo
# resources/profiles/Anycubic.json
# resources/profiles/Anycubic/machine/Anycubic Kobra 2 0.4 nozzle.json
# resources/profiles/BBL.json
# resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.2 nozzle.json
# resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.4 nozzle.json
# resources/profiles/BBL/filament/Bambu ASA @BBL X1C.json
# resources/profiles/BBL/filament/Bambu PA-CF @base.json
# resources/profiles/BBL/filament/Bambu PA6-CF @BBL X1C.json
# resources/profiles/BBL/filament/Bambu PA6-CF @base.json
# resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C.json
# resources/profiles/BBL/filament/Bambu Support W @BBL X1.json
# resources/profiles/BBL/filament/Bambu TPU 95A @BBL X1.json
# resources/profiles/BBL/filament/Generic HIPS @BBL X1C 0.2 nozzle.json
# resources/profiles/BBL/filament/Generic HIPS @BBL X1C.json
# resources/profiles/BBL/filament/Generic PA-CF.json
# resources/profiles/BBL/filament/Generic PC.json
# resources/profiles/BBL/filament/Generic PETG-CF @BBL X1C.json
# resources/profiles/BBL/filament/Generic PLA @0.2 nozzle.json
# resources/profiles/BBL/filament/Generic PLA High Speed @BBL P1P 0.2 nozzle.json
# resources/profiles/BBL/filament/Generic PLA High Speed @BBL P1P.json
# resources/profiles/BBL/filament/Generic PLA High Speed @BBL X1C 0.2 nozzle.json
# resources/profiles/BBL/filament/Generic PLA High Speed @BBL X1C.json
# resources/profiles/BBL/filament/Generic PLA-CF.json
# resources/profiles/BBL/filament/Generic PLA.json
# resources/profiles/BBL/filament/Generic TPU.json
# resources/profiles/BBL/filament/Overture Matte PLA @BBL P1P 0.2 nozzle.json
# resources/profiles/BBL/filament/Overture Matte PLA @BBL P1P.json
# resources/profiles/BBL/filament/Overture Matte PLA @BBL X1.json
# resources/profiles/BBL/filament/Overture Matte PLA @BBL X1C 0.2 nozzle.json
# resources/profiles/BBL/filament/Overture Matte PLA @BBL X1C.json
# resources/profiles/BBL/filament/Overture Matte PLA @base.json
# resources/profiles/BBL/filament/Overture PLA @BBL P1P 0.2 nozzle.json
# resources/profiles/BBL/filament/Overture PLA @BBL P1P.json
# resources/profiles/BBL/filament/Overture PLA @BBL X1.json
# resources/profiles/BBL/filament/Overture PLA @BBL X1C 0.2 nozzle.json
# resources/profiles/BBL/filament/Overture PLA @BBL X1C.json
# resources/profiles/BBL/filament/Overture PLA @base.json
# resources/profiles/BBL/filament/P1P/Bambu TPU 95A @BBL P1P.json
# resources/profiles/BBL/filament/P1P/Generic PLA @BBL P1P 0.2 nozzle.json
# resources/profiles/BBL/filament/P1P/Generic TPU @BBL P1P.json
# resources/profiles/BBL/filament/P1P/eSUN PLA+ @BBL P1P 0.2 nozzle.json
# resources/profiles/BBL/filament/P1P/eSUN PLA+ @BBL P1P.json
# resources/profiles/BBL/filament/PolyLite ABS @BBL P1P 0.2 nozzle.json
# resources/profiles/BBL/filament/PolyLite ABS @BBL P1P.json
# resources/profiles/BBL/filament/PolyLite ABS @BBL X1C 0.2 nozzle.json
# resources/profiles/BBL/filament/PolyLite ABS @BBL X1C.json
# resources/profiles/BBL/filament/PolyLite ABS @base.json
# resources/profiles/BBL/filament/PolyLite ASA @BBL P1P 0.2 nozzle.json
# resources/profiles/BBL/filament/PolyLite ASA @BBL P1P.json
# resources/profiles/BBL/filament/PolyLite ASA @BBL X1C 0.2 nozzle.json
# resources/profiles/BBL/filament/PolyLite ASA @BBL X1C.json
# resources/profiles/BBL/filament/PolyLite ASA @base.json
# resources/profiles/BBL/filament/PolyLite PETG @BBL P1P 0.2 nozzle.json
# resources/profiles/BBL/filament/PolyLite PETG @BBL P1P.json
# resources/profiles/BBL/filament/PolyLite PETG @BBL X1C 0.2 nozzle.json
# resources/profiles/BBL/filament/PolyLite PETG @BBL X1C.json
# resources/profiles/BBL/filament/PolyLite PETG @base.json
# resources/profiles/BBL/filament/PolyLite PLA @BBL X1.json
# resources/profiles/BBL/filament/PolyTerra PLA @BBL X1.json
# resources/profiles/BBL/filament/eSUN PLA+ @BBL X1.json
# resources/profiles/BBL/filament/eSUN PLA+ @BBL X1C 0.2 nozzle.json
# resources/profiles/BBL/filament/eSUN PLA+ @BBL X1C.json
# resources/profiles/BBL/machine/Bambu Lab P1P 0.2 nozzle.json
# resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle.json
# resources/profiles/BBL/machine/Bambu Lab P1P 0.6 nozzle.json
# resources/profiles/BBL/machine/Bambu Lab P1P 0.8 nozzle.json
# resources/profiles/BBL/machine/Bambu Lab P1S 0.2 nozzle.json
# resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle.json
# resources/profiles/BBL/machine/Bambu Lab P1S 0.6 nozzle.json
# resources/profiles/BBL/machine/Bambu Lab P1S 0.8 nozzle.json
# resources/profiles/BBL/machine/Bambu Lab X1 0.2 nozzle.json
# resources/profiles/BBL/machine/Bambu Lab X1 0.4 nozzle.json
# resources/profiles/BBL/machine/Bambu Lab X1 0.6 nozzle.json
# resources/profiles/BBL/machine/Bambu Lab X1 0.8 nozzle.json
# resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.2 nozzle.json
# resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle.json
# resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.6 nozzle.json
# resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.8 nozzle.json
# resources/profiles/BBL/machine/fdm_bbl_3dp_001_common.json
# resources/profiles/BBL/process/0.06mm Standard @BBL X1C 0.2 nozzle.json
# resources/profiles/BBL/process/0.08mm Extra Fine @BBL P1P.json
# resources/profiles/BBL/process/0.08mm Extra Fine @BBL X1C.json
# resources/profiles/BBL/process/0.08mm Standard @BBL X1C 0.2 nozzle.json
# resources/profiles/BBL/process/0.10mm Standard @BBL P1P 0.2 nozzle.json
# resources/profiles/BBL/process/0.10mm Standard @BBL X1C 0.2 nozzle.json
# resources/profiles/BBL/process/0.12mm Fine @BBL P1P.json
# resources/profiles/BBL/process/0.12mm Fine @BBL X1C.json
# resources/profiles/BBL/process/0.12mm Standard @BBL X1C 0.2 nozzle.json
# resources/profiles/BBL/process/0.14mm Standard @BBL X1C 0.2 nozzle.json
# resources/profiles/BBL/process/0.16mm Optimal @BBL P1P.json
# resources/profiles/BBL/process/0.16mm Optimal @BBL X1C.json
# resources/profiles/BBL/process/0.18mm Standard @BBL X1C 0.6 nozzle.json
# resources/profiles/BBL/process/0.20mm Standard @BBL P1P.json
# resources/profiles/BBL/process/0.20mm Standard @BBL X1C.json
# resources/profiles/BBL/process/0.20mm Strength @BBL P1P.json
# resources/profiles/BBL/process/0.20mm Strength @BBL X1C.json
# resources/profiles/BBL/process/0.24mm Draft @BBL P1P.json
# resources/profiles/BBL/process/0.24mm Draft @BBL X1C.json
# resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.6 nozzle.json
# resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.8 nozzle.json
# resources/profiles/BBL/process/0.28mm Extra Draft @BBL P1P.json
# resources/profiles/BBL/process/0.28mm Extra Draft @BBL X1C.json
# resources/profiles/BBL/process/0.30mm Standard @BBL P1P 0.6 nozzle.json
# resources/profiles/BBL/process/0.30mm Standard @BBL X1 0.6 nozzle.json
# resources/profiles/BBL/process/0.30mm Standard @BBL X1C 0.6 nozzle.json
# resources/profiles/BBL/process/0.30mm Strength @BBL X1C 0.6 nozzle.json
# resources/profiles/BBL/process/0.32mm Standard @BBL X1C 0.8 nozzle.json
# resources/profiles/BBL/process/0.36mm Standard @BBL X1C 0.6 nozzle.json
# resources/profiles/BBL/process/0.40mm Standard @BBL P1P 0.8 nozzle.json
# resources/profiles/BBL/process/0.40mm Standard @BBL X1 0.8 nozzle.json
# resources/profiles/BBL/process/0.40mm Standard @BBL X1C 0.8 nozzle.json
# resources/profiles/BBL/process/0.42mm Standard @BBL X1C 0.6 nozzle.json
# resources/profiles/BBL/process/0.48mm Standard @BBL X1C 0.8 nozzle.json
# resources/profiles/BBL/process/0.56mm Standard @BBL X1C 0.8 nozzle.json
# resources/profiles/BBL/process/fdm_process_bbl_common.json
# resources/profiles/Creality.json
# resources/profiles/Creality/machine/Creality CR-10 Max 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality CR-10 V2 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality CR-6 Max 0.2 nozzle.json
# resources/profiles/Creality/machine/Creality CR-6 Max 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality CR-6 Max 0.6 nozzle.json
# resources/profiles/Creality/machine/Creality CR-6 Max 0.8 nozzle.json
# resources/profiles/Creality/machine/Creality CR-6 SE 0.2 nozzle.json
# resources/profiles/Creality/machine/Creality CR-6 SE 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality CR-6 SE 0.6 nozzle.json
# resources/profiles/Creality/machine/Creality CR-6 SE 0.8 nozzle.json
# resources/profiles/Creality/machine/Creality Ender-3 S1 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality Ender-3 S1 Pro 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality Ender-5 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality Ender-5 Plus 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality Ender-5 S1 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality Ender-5S 0.4 nozzle.json
# resources/profiles/Creality/machine/Creality Ender-6 0.4 nozzle.json
# resources/profiles/Elegoo.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 2 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 2D 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 2S 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 3 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 3 Max 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 3 Plus 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune 3 Pro 0.4 nozzle.json
# resources/profiles/Elegoo/machine/Elegoo Neptune X 0.4 nozzle.json
# resources/profiles/Prusa.json
# resources/profiles/Prusa/machine/Prusa MINI 0.4 nozzle.json
# resources/profiles/Prusa/machine/Prusa MK3S 0.4 nozzle.json
# resources/profiles/Qidi/machine/Qidi X-CF Pro 0.4 nozzle.json
# resources/profiles/Qidi/machine/Qidi X-Max 0.4 nozzle.json
# resources/profiles/Qidi/machine/Qidi X-Max 3 0.4 nozzle.json
# resources/profiles/Qidi/machine/Qidi X-Plus 0.4 nozzle.json
# resources/profiles/Qidi/machine/Qidi X-Plus 3 0.4 nozzle.json
# resources/profiles/Qidi/machine/Qidi X-Smart 3 0.4 nozzle.json
# resources/profiles/Tronxy.json
# resources/profiles/Tronxy/machine/Tronxy X5SA 400 0.4 nozzle.json
# resources/profiles/Tronxy/process/0.08mm Extra Fine @Tronxy.json
# resources/profiles/Tronxy/process/0.12mm Fine @Tronxy.json
# resources/profiles/Tronxy/process/0.15mm Optimal @Tronxy.json
# resources/profiles/Tronxy/process/0.20mm Standard @Tronxy.json
# resources/profiles/Tronxy/process/0.24mm Draft @Tronxy.json
# resources/profiles/Tronxy/process/0.28mm Extra Draft @Tronxy.json
# resources/profiles/Voxelab/machine/Voxelab Aquila X2 0.4 nozzle.json
# resources/web/data/text.js
# src/OrcaSlicer.cpp
# src/libslic3r/GCode.cpp
# src/libslic3r/GCode/SeamPlacer.cpp
# src/libslic3r/GCode/SeamPlacer.hpp
# src/libslic3r/GCodeWriter.cpp
# src/libslic3r/GCodeWriter.hpp
# src/libslic3r/Preset.cpp
# src/libslic3r/PresetBundle.cpp
# src/libslic3r/Print.cpp
# src/libslic3r/PrintConfig.cpp
# src/libslic3r/PrintConfig.hpp
# src/libslic3r/TreeSupport.cpp
# src/libslic3r/calib.cpp
# src/libslic3r/calib.hpp
# src/slic3r/GUI/BackgroundSlicingProcess.cpp
# src/slic3r/GUI/BedShapeDialog.cpp
# src/slic3r/GUI/ConfigManipulation.cpp
# src/slic3r/GUI/GUI.cpp
# src/slic3r/GUI/GUI_App.cpp
# src/slic3r/GUI/GUI_Factories.cpp
# src/slic3r/GUI/GUI_ObjectList.cpp
# src/slic3r/GUI/Jobs/ArrangeJob.cpp
# src/slic3r/GUI/OptionsGroup.cpp
# src/slic3r/GUI/PartPlate.cpp
# src/slic3r/GUI/PartPlate.hpp
# src/slic3r/GUI/Plater.cpp
# src/slic3r/GUI/StatusPanel.cpp
# src/slic3r/GUI/Tab.cpp
# src/slic3r/GUI/Widgets/AMSControl.hpp
# version.inc
2023-09-29 19:46:49 +08:00
Scott Mudge
3433e7bfa0
Fix build warnings on windows, fix various bugs/logic errors/missing returns/etc, update boost::bind ( #2229 )
...
Fix build warnings on windows, fix various bugs/logic errors/missing returns/etc, update boost::bind.
2023-09-27 23:55:23 +08:00
Ioannis Giannakas
cf846195cc
Porting of Pressure Equalizer feature from Prusa Slicer 2.6.x ( #2161 )
...
* Overhang perimeter handling
Updated code to handle overhang perimeters as an overhang and not as a bridge.
* Preparing to add curled extrusions identification
* Porting curling calculations from Prusa Slier 2.6.1
* Prototype 1 - slowdown extended to detect curled edges and further reduce speed
First prototype of the code submitted.
* Working prototype - 2
Code is now finally working - external perimeters are slowed down as needed when there is likelyhood of curling up.
ToDo:
1. Reslicing the model causes the algorithm not to run - need to find where this fails to trigger the call for this.
2. Slowdown of internal perimeters not working yet.
* Updated to use overhang wall speed instead of bridging speed for this algorithm
* Fixed bug in speed calculation and tweaked parameters for high speed printer
Fixed bug in speed calculation and tweaked parameters for high speed printer
* Attempting to fix "set started" not being set
* Parameter tweak after print tests
* Fixed estimation not running when model is re-sliced.
* Removing debug printf statements and fixed threading flag.
* Fixed threading
* Parameter tweaks following print tests
* Made this as an option in the GUI
* Reintroduced handling of bridges as per original design
* UI line toggling when option makes sense to be visible.
* Fixed bug in field visibility & made it default to off
* Code optimisation
* Initial commit of code from Prusa Slicer 2.6.1
* Ported ExtrusionRole from Prusa Slicer 2.6.1
* fix compile errors
* Update GCode.hpp
* code changes to invoke pressure equalizer
* attempting to trigger pressure equalizer
(Not compiling)
* Update Fill.cpp
* Update Fill.cpp
* Pressure equaliser layer result update
* Further commits
* Merged PR https://github.com/prusa3d/PrusaSlicer/pull/9622
* First complete working version
* Update PressureEqualizer.cpp
* Implemented parameter in GUI
* Toggle fields according to compatibility
* Updated UI toggles between extrusion rate slope and arc fitting.
* Updated tooltip
* Introduced parameter smoothing segment length
This parameter influences the number of division a line will undergo in response to the requirement to adhere to the extrusion rate flow adjustment.
* Internal parameter and tool tip tweaking
* Parameter and tool tip tweaking
* Updated parameters and tooltip following testing.
* Sync PressureEq with latest PrusaSlicer
* Revert "Sync PressureEq with latest PrusaSlicer"
This reverts commit 131fb94c6b
2023-09-27 21:44:45 +08:00
SoftFever
33f91c026a
Hide purge tower preview in case of no tool changes
2023-09-25 23:17:56 +08:00
SoftFever
f06b7cb526
QoL: improve PA Line method
...
Signed-off-by: SoftFever <softfeverever@gmail.com>
2023-09-25 20:39:02 +08:00
Noisyfox
7ef43f6849
Various support improvements and bugfixes ( #2202 )
...
* Organic supports: Added check for variable layer height, with which
Organic supports are not compatible.
Fixes prusa3d/PrusaSlicer#9528 and similar.
Check the object max Z against build volume Z in Print::validate().
Cherry-picked from prusa3d/PrusaSlicer@5b94971
* Fix crash with default tree support
* Show "support_critical_regions_only" only when using auto normal tree supports (#2195 )
* Fix organic tree check
---------
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
2023-09-24 22:58:04 +08:00
lane.wei
b8834c59cb
FIX: fix the config parse error for some language
...
JIRA: github-2568
Change-Id: Idd1ccb118dde4d0fe663ee4d1e4426c0e504ff1e
2023-09-23 00:48:53 +08:00
lane.wei
03f7bcec51
FIX: CLI: refine some logic
...
1. sometimes the pipe open failed,
add some retry logic;
2. return the reason when no-check=1 while validate fail;
3. return an error when duplicate object under spiral-mode when not using
by-object print sequence
JIRA: MAK-xxxx
Change-Id: I3792d89dbbe560a8febe0f0154bccb8f573959a5
2023-09-23 00:48:53 +08:00
lane.wei
805248f38a
ENH: 3mf: improve some logic
...
1. skip file including /../
2. use snprintf instead of sprintf
JIRA: jira-xxxx
Change-Id: I6695dc11f9f4af4318038e6db5c219fd14e73aef
2023-09-22 16:21:26 +08:00
Arthur
2293b33e73
ENH: do not include brim_max in bed shrink
...
Including brim_max in bed shrink will make available area of bed be
small when an object has tree support, because this object will have
a brim_width as large as 24mm now.
Jira: MAK-2048
Change-Id: I309c0ec14e4acd75dcfc2fff0e7ea3558b43cc4c
2023-09-22 16:21:26 +08:00
zhimin.zeng
a1d3823521
FIX: the wipe tower is not generated with a multi-color 3mf
...
open a multi-color 3mf after another one, the wipe tower is not generated
Jira: 4528
Change-Id: I3b9b67e6a19f6d1b620b5aeca25e32710193574c
2023-09-22 16:21:26 +08:00
zhimin.zeng
5010994d88
FIX: add log for cali
...
Jira: XXXX
Change-Id: Ifce2d57d2694c5b39fec93529e6efffa036b8e68
(cherry picked from commit e9ffe4de41096b01f6918eafec5b365360b9cff0)
2023-09-22 16:21:26 +08:00
Arthur
0b4b6cde4f
ENH: sync master with auto-arranging and brim
...
auto-arranging considers wipe tower from smooth timelapse
Change-Id: I5dd72260c777abfd2894776b2588bb3ff4224416
2023-09-22 16:21:26 +08:00
Arthur
f2396b839c
FIX: cmd line auto arrage for sequential printing not working
...
min_obj_disance was not set for sequential printing of cmd line.
Jira: None
Change-Id: Idce14aedf8448a0917533efb93f7c78fff34587d
2023-09-22 16:21:26 +08:00
Arthur
d8ba43d979
ENH: improve auto-arranging objects with tree support
...
We decide to set brim width of all objects to MAX_BRANCH_RADIUS_FIRST_LAYER if there is an object with tree support after discussion.
Jira: MAK-2009
Change-Id: I4c4940800632c433235966b01c44ac910e33a51c
2023-09-22 16:21:26 +08:00
Arthur
793a642bd7
ENH: improve auto-arranging of A1 mini
...
1. the best object pos of A1 mini is [0.7,0.5] of bed.
2. dominant direction is more accurate (solve the problem that cubes are
not arranged neatly).
Jira: STUDIO-4356
Change-Id: I8931f51a97bee96d5d9e75306481eae2e0cdc059
2023-09-22 16:21:26 +08:00
manch1n
7beed5d6dd
NEW: add align_to_y_axis option for auto-arrange
...
1. Add align_to_y_axis option for auto-arrange.
This is useful for auto-arranging of i3 type printers.
2. Change default value of align_to_origin to true when switching
from non-i3 printers to i3 printers.
JIRA: STUDIO-2583
Change-Id: I7dabab846022a0da030a9fec060a60a4207537a0
2023-09-22 16:21:26 +08:00
chunmao.guo
e789489ed9
NEW: add best_object_pos for auto-arranging
...
For i3 printers, best object position may not be the bed center,
we need to align objects to the specified best_object_pos.
Jira: STUDIO-4133
Change-Id: I06e31e597d2dd8288eb24a52d836cc8a134a4111
2023-09-22 16:21:26 +08:00
zhimin.zeng
264f02e8d8
FIX: Adjust error information storage method
...
Jira: XXXX
Change-Id: If6564f6425678faa2df9b08d9c7642afb7ffbe50
2023-09-22 16:21:26 +08:00
Arthur
cd7437946c
FIX: auto arrange may put objects with tree supports too close
...
Increase the brim width to the max full diameter of tree supports.
Jira: MAK-2009
Change-Id: If44da7107f79eddccca42a54484806269e3fee5c
(cherry picked from commit 8a60e8787d7be1ad147edb78eca7f2259a27927b)
2023-09-22 16:21:26 +08:00
Stone Li
623a4b3635
ENH: modify some words for translation
...
Change-Id: I912b0b13e3603abe483d0cb27f7ff6eea3ee7a3a
Signed-off-by: Stone Li <stone.li@bambulab.com>
2023-09-22 16:21:26 +08:00
shuai.liu
1e1125b785
FIX: [STUDIO-3921] orientation bug
...
JIRA: STUDIO-3921
fix the orientation bug that multiple objects does not perform the same
increase num of hull faces to iterate
Change-Id: I9c662e1e7858521585de612d7f1e9cd213e183bb
(cherry picked from commit 7ce0ba3e037f9b2a6d420ab302913753f9ea7544)
2023-09-22 16:21:26 +08:00
zhimin.zeng
cdbbdafc59
FIX: print by object not support timelapse for I3
...
Jira: XXXX
Change-Id: I8354971843f1e020db0f6407348cfa220ad514f2
2023-09-22 16:21:26 +08:00
lane.wei
85ea716961
FIX: CLI: fix the png decoding error
...
JIRA: MAK-xxxx(no jira currently)
Change-Id: Id99511355cec7a51cafd5254f308c60a7ac1f57d
2023-09-22 16:21:26 +08:00
xun.zhang
50051b82d1
ENH: modify tooltip in chamber temp
...
Also remove bed_temperature_difference in config
jira: STUDIO-4197
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id992bf0a6b5496038d513a6243b54c5232113515
(cherry picked from commit bda89606a36f3629ad1e1721e005242911635cbd)
2023-09-22 16:21:26 +08:00
shuai.liu
b9cc020fea
ENH: auto adapt distance in arrangement
...
JIRA: STUDIO-4408
1. if min_obj_distance is 0, use auto mode
2. normal support, 5mm gap, tree support, 22mm gap, no support, 0.1mm
gap
Change-Id: I906ccf267bef1f33a946572614d658fd50cfcda3
(cherry picked from commit 3c65150434c9938442b0c8d7995f21bb5e50db89)
2023-09-22 16:21:26 +08:00
xun.zhang
6574a0fec4
ENH: fix full_label problem in chamber temp
...
STUIDO:3518
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id714e518fdc8fb15dfd64046afb4806ea95a31ba
2023-09-22 16:21:26 +08:00
xun.zhang
58658ebcb5
ENH: optimize exhaust fan param display
...
1.Optimize exhaust fan param display
2.Set max chamber temp to 60
jira:STUDIO-3518
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I0663803381f38f717554da4aefc61e02a8c1f37e
2023-09-22 16:21:26 +08:00
xun.zhang
60bb7309ac
ENH: disable edit support chamber temp
...
jira:STUDIO-4230
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I4873badacc5d3947f56df1ea367481ddae748fff
2023-09-22 16:21:26 +08:00
xun.zhang
5a39eca04b
FIX: optimize exhaust fan ui logic
...
1. Enable open support_activate_air_filtration
2. Fix display exhaust fan params when support_activate_air_filtration is closed
jira:STUDIO-4230
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ieddba4bb104b6068b5afb4c109ea6b90d7c4045b
2023-09-22 16:21:26 +08:00
xun.zhang
13bb1552aa
ENH: add protection for chamber temperature
...
As title. Also add time for waiting chamber temp in printing time
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I8054080d2e8821e421a6d03222b8b25365b5977f
2023-09-22 16:21:26 +08:00
xun.zhang
2d40511488
ENH: add filament PPA-GF
...
1.Add filament Generic PPA-GF
2.Set Generic PPA-CF filament type to PPA-CF
jira: STUDIO-3518
Change-Id: I1b81bca3774944aebdf15f88213fcb9b36b93e41
2023-09-22 16:21:26 +08:00
xun.zhang
596fcb0f69
ENH: add filement type pps-cf
...
jira: STUDIO-3518
Change-Id: Ifebaa96ca2e8336bf5449d7c9bd053ab00ab8041
2023-09-22 16:21:26 +08:00
zhimin.zeng
f964842d8f
FIX: filament override is not correct
...
Multiple filament slots does not change the actual filament settings
Jira: 3797
Change-Id: Ib377b4c79aae731caa97b408e84a87a33b3bb155
(cherry picked from commit 7d704d8f0bae14f16087c77c1bd90946632330a6)
(cherry picked from commit 43e8956a1ffc9e2afbc82fdb77565f0543ac8a68)
2023-09-22 16:21:26 +08:00
