Jerk handling has been changed in printer.
Changed in slicer as well.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ic3aef43a534a7f0b85b734e747dc3ca883faaa46
This patch can make sure that the cooling fan will not
be enabled during change fimanet.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I9f480b99116d62fe7522233b69b5bca209663821
Towline may be even lower than the upper rod. Let's
take away 10mm tolerance.
Change-Id: I13972fc4ecb0671e1af4b2c6d102e319417e532f
(cherry picked from commit cedcb862556c8c9014a91ef2aad8f39fc118d925)
1. use strict ordering to ensure the printing order is right
2. reduce height-to-lid to 100mm considering towline is lower than lid
and may collid with objects
TODO: printing brim may still collide, need to subtract inflated boundary of
others during brim generation
Change-Id: Icf0cba10c579d28fabd97764c1b3abec267ebd9b
(cherry picked from commit 46c6f5ff94488b2f4481bf1d34555f4a7c45e135)
1. Previous logic can't guarantee left-to-right printing order, so
toolhead may crash on the right side. In the new algorithm printing
order is guaranteed.
2. Clearance radius should be the max of 3 directions (left, bottom,
up), not including right, otherwise collision may happen on bottom or
up directions.
3. Add is_extrusion_cali_object property to handle extrusion brim
overlap better.
Change-Id: I44868b9925d983f5cca0c31d35dfa28d895fadbf
This is change requirement from printer developer
for github issue #393
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ief306d89dba70d8515050cbd842edc4e1d22822e
filament_max_volumetric may be 0 which cause zero
flushing speed. Add protection for this issue.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I866b9d97c9c6d97122a4a2beaf508ce9c72ee3b2
Add M400 to avoid temperature switched before flush end.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I118bb240357e5c820c15e46ae34efa62248fdacc
