1 extrude move to dustbin
2 max vol of TPU 95A of X1 to 3.6
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I0b9d2a1db9c57c58255f95aad8a77772317a3ec9
1. add gcode command for void printing detection
2. fix the issue that the toolhead is not at excess chute position when
smooth timelapse ends, by adding 2s pause after M991 command.
Jira: STUDIO-1996
Change-Id: I40cf16116e742744cea9bd90969e556a9ea2b2f1
(cherry picked from commit 2fbf7ffe6b1bd8850a76e229ff91750c689721b9)
1 Use 25% infill density. 60% is too high and useless
2 update filament change gcode
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I9a1fbbfb56b61723aa6e9d6bc44a22f467d92562
Jerk handling has been changed in printer.
Changed in slicer as well.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ic3aef43a534a7f0b85b734e747dc3ca883faaa46
This patch can make sure that the cooling fan will not
be enabled during change fimanet.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I9f480b99116d62fe7522233b69b5bca209663821
Towline may be even lower than the upper rod. Let's
take away 10mm tolerance.
Change-Id: I13972fc4ecb0671e1af4b2c6d102e319417e532f
(cherry picked from commit cedcb862556c8c9014a91ef2aad8f39fc118d925)
1. use strict ordering to ensure the printing order is right
2. reduce height-to-lid to 100mm considering towline is lower than lid
and may collid with objects
TODO: printing brim may still collide, need to subtract inflated boundary of
others during brim generation
Change-Id: Icf0cba10c579d28fabd97764c1b3abec267ebd9b
(cherry picked from commit 46c6f5ff94488b2f4481bf1d34555f4a7c45e135)
1. Previous logic can't guarantee left-to-right printing order, so
toolhead may crash on the right side. In the new algorithm printing
order is guaranteed.
2. Clearance radius should be the max of 3 directions (left, bottom,
up), not including right, otherwise collision may happen on bottom or
up directions.
3. Add is_extrusion_cali_object property to handle extrusion brim
overlap better.
Change-Id: I44868b9925d983f5cca0c31d35dfa28d895fadbf
This is change requirement from printer developer
for github issue #393
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ief306d89dba70d8515050cbd842edc4e1d22822e
filament_max_volumetric may be 0 which cause zero
flushing speed. Add protection for this issue.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I866b9d97c9c6d97122a4a2beaf508ce9c72ee3b2
Add M400 to avoid temperature switched before flush end.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I118bb240357e5c820c15e46ae34efa62248fdacc
