FIX: Calibration related translation

Change-Id: I3845cec9ba2d826a1e264ec2d4f8d9b428ab3af9

bbl/i18n/en/BambuStudio_en.po

@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-07-13 17:13+0800\n"
+"POT-Creation-Date: 2023-07-21 18:36+0800\n"
 "Language: en\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -832,6 +832,9 @@ msgstr "Cone"
 msgid "Bambu Cube"
 msgstr ""
 
+msgid "Bambu Cube V2"
+msgstr ""
+
 msgid "3DBenchy"
 msgstr ""
 
@@ -2638,6 +2641,12 @@ msgstr "Update failed."
 msgid "Failed to start printing job"
 msgstr "Failed to start print job"
 
+msgid "Invalid nozzle diameter"
+msgstr ""
+
+msgid "Calibration error"
+msgstr ""
+
 msgid "TPU is not supported by AMS."
 msgstr ""
 
@@ -7084,10 +7093,10 @@ msgid ""
 "decrease it slightly to have smooth surface finish"
 msgstr ""
 
-msgid "Bottom surface flow ratio"
+msgid "Initial layer flow ratio"
 msgstr ""
 
-msgid "This factor affects the amount of material for bottom solid infill"
+msgid "This factor affects the amount of material for the initial layer"
 msgstr ""
 
 msgid "Only one wall on top surfaces"
@@ -9449,6 +9458,13 @@ msgstr "Finish"
 msgid "Wiki"
 msgstr ""
 
+msgid "How to use calibration result?"
+msgstr ""
+
+msgid ""
+"You could change the Flow Dynamics Calibration Factor in material editing"
+msgstr ""
+
 msgid ""
 "The current firmware version of the printer does not support calibration.\n"
 "Please upgrade the printer firmware."
@@ -9501,6 +9517,9 @@ msgstr ""
 msgid "Please select filament to calibrate."
 msgstr ""
 
+msgid "Connecting to printer..."
+msgstr ""
+
 msgid "The failed test result has been droped."
 msgstr ""
 
@@ -9560,47 +9579,43 @@ msgid ""
 "investigating the root cause to do improvements with new updates."
 msgstr ""
 
-msgid "When you need to use Flow Rate Calibration"
+msgid "When to use Flow Rate Calibration"
 msgstr ""
 
 msgid ""
 "After using Flow Dynamics Calibration, there might still be some extrusion "
 "issues, such as:\n"
-"1. Over-Extrusion: If you see excess material on your printed object, "
-"forming blobs or zits, or the layers seem thicker than expected and not "
-"uniform, it could be a sign of over-extrusion. This can also manifest "
-"through problems in parts that need to be assembled not fitting as "
-"expected.\n"
-"2. Under-Extrusion: Signs include missing layers or very thin layers, weak "
-"infill strength, or gaps in the top layer of the model, even if the print is "
-"slow. This could mean that your printer isn't extruding enough filament.\n"
-"3. Poor Surface Quality: If the surface of your prints seems rough or "
-"uneven, this could be a result of an incorrect flow rate.\n"
-"4. Weak Structural Integrity: If your prints break easily or don't seem as "
-"sturdy as they should be, this might be due to under-extrusion or poor layer "
-"adhesion."
+"1. Over-Extrusion: Excess material on your printed object, forming blobs or "
+"zits, or the layers seem thicker than expected and not uniform.\n"
+"2. Under-Extrusion: Very thin layers, weak infill strength, or gaps in the "
+"top layer of the model, even when printing slowly.\n"
+"3. Poor Surface Quality: The surface of your prints seems rough or uneven.\n"
+"4. Weak Structural Integrity: Prints break easily or don't seem as sturdy as "
+"they should be."
 msgstr ""
 
 msgid ""
-"Beyond fixing the noted printing defects, Flow Rate Calibration is crucial "
-"for foaming materials like LW-PLA used in RC planes. These materials expand "
-"greatly when heated, and calibration provides a useful reference flow rate "
-"to achieve good printing results with these special filaments."
+"In addition, Flow Rate Calibration is crucial for foaming materials like LW-"
+"PLA used in RC planes. These materials expand greatly when heated, and "
+"calibration provides a useful reference flow rate."
 msgstr ""
 
 msgid ""
 "Flow Rate Calibration measures the ratio of expected to actual extrusion "
-"volumes. This ratio is normally stable and the default setting works well in "
-"Bambu Lab printers and official filaments as they were pre-calibrated and "
-"fine tuned. For a regular filament, you usually won't need to perform a Flow "
-"Rate Calibration. For more details, please check out the wiki article.\n"
-"\n"
-"Flow Rate Calibration utilizes Bambu Lab's Micro-Lidar technology, directly "
-"measuring calibration the calibration patterns. However, please be advised "
-"that the efficacy and accuracy of this method may be compromised with "
-"specific types of materials. Particularly, filaments that are transparent or "
-"semi-transparent, sparkling-particled, or have a high-reflective finish may "
-"not be suitable for this calibration and can produce less-than-desirable "
+"volumes. The default setting works well in Bambu Lab printers and official "
+"filaments as they were pre-calibrated and fine-tuned. For a regular "
+"filament, you usually won't need to perform a Flow Rate Calibration unless "
+"you still see the listed defects after you have done other calibrations. For "
+"more details, please check out the wiki article."
+msgstr ""
+
+msgid ""
+"Auto Flow Rate Calibration utilizes Bambu Lab's Micro-Lidar technology, "
+"directly measuring the calibration patterns. However, please be advised that "
+"the efficacy and accuracy of this method may be compromised with specific "
+"types of materials. Particularly, filaments that are transparent or semi-"
+"transparent, sparkling-particled, or have a high-reflective finish may not "
+"be suitable for this calibration and can produce less-than-desirable "
 "results.\n"
 "\n"
 "The calibration results may vary between each calibration or filament. We "
@@ -9668,7 +9683,7 @@ msgstr ""
 msgid "Preset"
 msgstr ""
 
-msgid "Record"
+msgid "Record Factor"
 msgstr ""
 
 msgid "We found the best flow ratio for you"
@@ -9731,12 +9746,15 @@ msgstr ""
 msgid "Printing Parameters"
 msgstr ""
 
-msgid "Please select the nozzle diameter of your printer"
+msgid "- ℃"
 msgstr ""
 
-msgid "Please select the plate type of your printer"
+msgid " ℃"
 msgstr ""
 
+msgid "Plate Type"
+msgstr "Plate Type"
+
 msgid "filament position"
 msgstr ""
 
@@ -9758,13 +9776,16 @@ msgstr ""
 msgid "Extra info"
 msgstr ""
 
-msgid "Record Factor"
-msgstr ""
-
 #, c-format, boost-format
 msgid "%s is not compatible with %s"
 msgstr ""
 
+msgid "TPU is not supported for Flow Dynamics Auto-Calibration."
+msgstr ""
+
+msgid "Connecting to printer"
+msgstr ""
+
 msgid "The nozzle diameter has been synchronized from the printer Settings"
 msgstr ""
 
@@ -11004,9 +11025,6 @@ msgstr ""
 #~ msgid "Plate %d: %s does not support filament %s (%s).\n"
 #~ msgstr "Plate %d: %s does not support filament %s (%s).\n"
 
-#~ msgid "Plate Type"
-#~ msgstr "Plate Type"
-
 #~ msgid "Plate type"
 #~ msgstr "Plate type"