Fix german hotkey #950 (#984)

* fix empty label

* many typos fixed

* Magic Hotkey fix

* Typo in initial Setup Wizard #982

bbl/i18n/OrcaSlicer.pot

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-04-29 20:13+0800\n"
+"POT-Creation-Date: 2023-05-06 13:46+0200\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -17,7 +17,6 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=INTEGER; plural=EXPRESSION;\n"
-
 msgid "Physical Printer"
 msgstr ""
 
@@ -4976,8 +4975,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
+"by right-click the empty position of build plate and choose \"Add "
-"\"->\"Timelapse Wipe Tower\"."
+"Primitive\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 
 msgid "Line width"
@@ -5040,9 +5039,6 @@ msgstr ""
 msgid "Post-processing Scripts"
 msgstr ""
 
-msgid "Post-processing scripts"
-msgstr ""
-
 msgid "Frequent"
 msgstr ""
 
@@ -5159,6 +5155,12 @@ msgstr ""
 msgid "Printable space"
 msgstr ""
 
+msgid "Cooling Fan"
+msgstr ""
+
+msgid "Fan speedup time"
+msgstr ""
+
 msgid "Extruder Clearance"
 msgstr ""
 
@@ -6389,7 +6391,7 @@ msgid ""
 "all outer wall no matter how much overhang degree"
 msgstr ""
 
-msgid "Bridge direction"
+msgid "Bridge infill direction"
 msgstr ""
 
 msgid ""
@@ -6901,14 +6903,6 @@ msgid ""
 "of line"
 msgstr ""
 
-msgid "Bridge infill direction"
-msgstr ""
-
-msgid ""
-"Angle for bridge infill pattern, which controls the start or main direction "
-"of line"
-msgstr ""
-
 msgid "Sparse infill density"
 msgstr ""
 
@@ -7164,6 +7158,38 @@ msgstr ""
 msgid "Enable this option if machine has auxiliary part cooling fan"
 msgstr ""
 
+msgid "Fan Speedup Time"
+msgstr ""
+
+msgid ""
+"Start the fan this number of seconds earlier than its target start time (you "
+"can use fractional seconds). It assumes infinite acceleration for this time "
+"estimation, and will only take into account G1 and G0 moves (arc fitting is "
+"unsupported).\n"
+"It won't move fan comands from custom gcodes (they act as a sort of "
+"'barrier').\n"
+"It won't move fan comands into the start gcode if the 'only custom start "
+"gcode' is activated.\n"
+"Use 0 to deactivate."
+msgstr ""
+
+msgid "Only overhangs"
+msgstr ""
+
+msgid "Will only take into account the delay for the cooling of overhangs."
+msgstr ""
+
+msgid "Fan kick-start time"
+msgstr ""
+
+msgid ""
+"Emit a max fan speed command for this amount of seconds before reducing to "
+"target speed to kick-start the cooling fan.\n"
+"This is useful for fans where a low PWM/power may be insufficient to get the "
+"fan started spinning from a stop, or to get the fan up to speed faster.\n"
+"Set to 0 to deactivate."
+msgstr ""
+
 msgid "G-code flavor"
 msgstr ""
 
@@ -7655,8 +7681,8 @@ msgstr ""
 msgid ""
 "In order to reduce the visibility of the seam in a closed loop extrusion, "
 "the loop is interrupted and shortened by a specified amount.\n"
-"This amount can be specified in millimeters or as a percentage of the current "
+"This amount can be specified in millimeters or as a percentage of the "
-"extruder diameter. The default value for this parameter is 15%."
+"current extruder diameter. The default value for this parameter is 15%."
 msgstr ""
 
 msgid "Role base wipe speed"

resources/profiles/Custom.json

@@ -5,7 +5,7 @@
     "description": "My configurations",
     "machine_model_list": [
         {
-            "name": "Generaic Klipper Printer",
+            "name": "Generic Klipper Printer",
             "sub_path": "machine/MyKlipper.json"
         },
         {

resources/profiles/Custom/machine/MyKlipper 0.4 nozzle.json

@@ -5,7 +5,7 @@
   "from": "system",
   "instantiation": "true",
   "inherits": "fdm_klipper_common",
-  "printer_model": "Generaic Klipper Printer",
+  "printer_model": "Generic Klipper Printer",
   "nozzle_diameter": [
     "0.4"
   ],

resources/profiles/Custom/machine/MyKlipper.json

@@ -1,6 +1,6 @@
 {
     "type": "machine_model",
-    "name": "Generaic Klipper Printer",
+    "name": "Generic Klipper Printer",
     "model_id": "my_klipper_01",
     "nozzle_diameter": "0.4",
     "machine_tech": "FFF",

src/libslic3r/PrintConfig.cpp

@@ -1764,7 +1764,7 @@ void PrintConfigDef::init_fff_params()
     def->set_default_value(new ConfigOptionBool(false));
 
     def = this->add("fan_speedup_time", coFloat);
-    def->label = L("");
+    def->label = L("Fan Speedup Time");
     def->tooltip = L("Start the fan this number of seconds earlier than its target start time (you can use fractional seconds)."
         " It assumes infinite acceleration for this time estimation, and will only take into account G1 and G0 moves (arc fitting"
         " is unsupported)."