Profile rework (#4)

* default BBL profile

* voron

* wip

* Voron profile

* Prusa MK3S

* add Prusa mk3s

* fix an issue that print_host value was not retrieved.

* add chamber temperature option for filament

* slightly adjust thumbernail angle

* Revert "slightly adjust thumbernail angle"

This reverts commit 6ad38efb36.

* add `one wall on first layer` option

* save preset for connection

* remove unused options

* set default 3000 accl for MK3S

* tweak profile

* update Voron logo

* UI twwaks

* Readme update

* change abs default nozzle temp

* misc

* tweak profiles

* Update README

resources/profiles/Prusa/machine/Prusa MK3S 0.4 nozzle.json

@@ -0,0 +1,34 @@
+{
+  "type": "machine",
+  "setting_id": "GM003",
+  "name": "Prusa MK3S 0.4 nozzle",
+  "from": "system",
+  "instantiation": "true",
+  "inherits": "fdm_machine_common",
+  "printer_model": "Prusa MK3S",
+  "default_filament_profile": [
+      "Prusa Generic PLA"
+  ],
+  "default_print_profile": "0.20mm Standard @MK3S",
+  "nozzle_diameter": [
+      "0.4"
+  ],
+  "bed_exclude_area": [
+    "0x0"
+  ],
+  "printable_area": [
+    "0x0",
+    "250x0",
+    "250x210",
+    "0x210"
+  ],
+  "printable_height": "210",
+  "machine_start_gcode": "M862.3 P \"[printer_model]\" ; printer model check\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp for bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set bed temp\nM109 R170 ; wait for bed leveling temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp\nM204 T1250 ; set travel acceleration\nG28 ; home all without mesh bed level\nG29 ; mesh bed leveling \nM204 T[machine_max_acceleration_travel] ; restore travel acceleration\nM104 S[nozzle_temperature_initial_layer] ; set extruder temp\nG92 E0\nG1 Y-2 X179 F2400\nG1 Z3 F720\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\n\n; intro line\nG1 X170 F1000\nG1 Z0.2 F720\nG1 X110 E8 F900\nG1 X40 E10 F700\nG92 E0\n\nM221 S95 ; set flow",
+  "machine_end_gcode": "G1 E-1 F2100 ; retract\n{if max_layer_z < 210}G1 Z{min(max_layer_z+2, 210)} F720 ; Move print head up{endif}\nG1 X178 Y178 F4200 ; park print head\n{if max_layer_z < 210}G1 Z{min(max_layer_z+30, 210)} F720 ; Move print head further up{endif}\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM221 S100 ; reset flow\nM900 K0 ; reset LA\nM84 ; disable motors",
+  "layer_change_gcode": "",
+  "scan_first_layer": "0",
+  "machine_load_filament_time": "17",
+  "machine_unload_filament_time": "16",
+  "nozzle_type": "hardened_steel",
+  "auxiliary_fan": "0"
+}

resources/profiles/Prusa/machine/Prusa MK3S.json

@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "Prusa MK3S",
+    "model_id": "MK3S",
+    "nozzle_diameter": "0.4",
+    "machine_tech": "FFF",
+    "family": "Prusa",
+    "bed_model": "mk3_bed.stl",
+    "bed_texture": "mk3.svg",
+    "hotend_model": "bbl-3dp-hotend.stl",
+    "default_materials": "Prusa Generic ABS;Prusa Generic PLA;Prusa Generic PLA-CF;Prusa Generic PETG;Prusa Generic TPU;Prusa Generic ASA;Prusa Generic PC;Prusa Generic PVA;Prusa Generic PA;Prusa Generic PA-CF"
+}

resources/profiles/Prusa/machine/fdm_machine_common.json

@@ -0,0 +1,137 @@
+{
+    "type": "machine",
+    "name": "fdm_machine_common",
+    "from": "system",
+    "instantiation": "false",
+    "gcode_flavor": "marlin",
+    "machine_start_gcode": "",
+    "machine_end_gcode": "",
+    "extruder_colour": [
+        "#018001"
+    ],
+    "extruder_offset": [
+        "0x0"
+    ],
+    "machine_max_acceleration_e": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_extruding": [
+        "2000",
+        "2000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_travel": [
+        "3000",
+        "3000"
+    ],
+    "machine_max_acceleration_x": [
+        "2000",
+        "2000"
+    ],
+    "machine_max_acceleration_y": [
+        "2000",
+        "2000"
+    ],
+    "machine_max_acceleration_z": [
+        "300",
+        "200"
+    ],
+    "machine_max_speed_e": [
+        "25",
+        "25"
+    ],
+    "machine_max_speed_x": [
+        "300",
+        "200"
+    ],
+    "machine_max_speed_y": [
+        "300",
+        "200"
+    ],
+    "machine_max_speed_z": [
+        "12",
+        "12"
+    ],
+    "machine_max_jerk_e": [
+        "2.5",
+        "2.5"
+    ],
+    "machine_max_jerk_x": [
+        "9",
+        "9"
+    ],
+    "machine_max_jerk_y": [
+        "9",
+        "9"
+    ],
+    "machine_max_jerk_z": [
+        "0.2",
+        "0.4"
+    ],
+    "machine_min_extruding_rate": [
+        "0",
+        "0"
+    ],
+    "machine_min_travel_rate": [
+        "0",
+        "0"
+    ],
+    "max_layer_height": [
+        "0.3"
+    ],
+    "min_layer_height": [
+        "0.08"
+    ],
+    "printable_height": "250",
+    "extruder_clearance_radius": "65",
+    "extruder_clearance_height_to_rod": "36",
+    "extruder_clearance_height_to_lid": "140",
+    "nozzle_diameter": [
+        "0.4"
+    ],
+    "printer_settings_id": "",
+    "printer_technology": "FFF",
+    "printer_variant": "0.4",
+    "retraction_minimum_travel": [
+        "1"
+    ],
+    "retract_before_wipe": [
+        "70%"
+    ],
+    "retract_when_changing_layer": [
+        "1"
+    ],
+    "retraction_length": [
+        "0.8"
+    ],
+    "retract_length_toolchange": [
+        "2"
+    ],
+    "z_hop": [
+        "0.4"
+    ],
+    "retract_restart_extra": [
+        "0"
+    ],
+    "retract_restart_extra_toolchange": [
+        "0"
+    ],
+    "retraction_speed": [
+        "30"
+    ],
+    "deretraction_speed": [
+        "30"
+    ],
+    "silent_mode": "0",
+    "single_extruder_multi_material": "1",
+    "change_filament_gcode": "",
+    "layer_change_gcode": "",
+    "machine_pause_gcode": "M400 U1\n",
+    "wipe": [
+        "1"
+    ]
+}