3D-printing/OrcaSlicer
1
0
Fork 0
mirror of https://github.com/SoftFever/OrcaSlicer.git synced 2025-07-11 16:57:53 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions 1

comments...

Browse source
This commit is contained in:
tamasmeszaros 2018-11-21 10:00:49 +01:00
parent 37b5cb9a4d
commit 897ca1aa44
2 changed files with 10 additions and 7 deletions
Download patch file Download diff file Expand all files Collapse all files

11
src/libslic3r/SLAPrint.cpp
View file

@ -133,6 +133,15 @@ void SLAPrint::process()
double ilhd = m_material_config.initial_layer_height.getFloat();
auto ilh = float(ilhd);
// The slicing will be performed on an imaginary 1D grid which starts from
// the bottom of the bounding box created around the supported model. So
// the first layer which is usually thicker will be part of the supports
// not the model geometry. Exception is when the model is not in the air
// (elevation is zero) and no pad creation was requested. In this case the
// model geometry starts on the ground level and the initial layer is part
// of it. In any case, the model and the supports have to be sliced in the
// same imaginary grid (the height vector argument to TriangleMeshSlicer).
// Slicing the model object. This method is oversimplified and needs to
// be compared with the fff slicing algorithm for verification
auto slice_model = [this, ilh, ilhd](SLAPrintObject& po) {
@ -152,7 +161,7 @@ void SLAPrint::process()
std::vector<float> heights;
// The first layer (the one before the initial height) is added only
// if the there is no pad and no elevation value
// if there is no pad and no elevation value
if(minZ >= gnd) heights.emplace_back(minZ);
for(float h = minZ + ilh; h < maxZ; h += flh)