Update locale

1. include PhysicalPrinterDialog.cpp in the list.txt
2. Update Chinese translation
3. Add handy models to the translation list
This commit is contained in:
SoftFever 2023-05-14 12:30:13 +08:00
parent 37e105c1e8
commit 7fc16d8774
21 changed files with 3525 additions and 1523 deletions

View file

@ -8,7 +8,7 @@ msgid ""
msgstr "" msgstr ""
"Project-Id-Version: PACKAGE VERSION\n" "Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: \n" "Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2023-05-08 16:37+0200\n" "POT-Creation-Date: 2023-05-14 11:52+0800\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n" "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n" "Language-Team: LANGUAGE <LL@li.org>\n"
@ -17,29 +17,6 @@ msgstr ""
"Content-Type: text/plain; charset=UTF-8\n" "Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n" "Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=INTEGER; plural=EXPRESSION;\n" "Plural-Forms: nplurals=INTEGER; plural=EXPRESSION;\n"
msgid "Physical Printer"
msgstr ""
msgid "HTTPS CA file is optional. It is only needed if you use HTTPS with a self-signed certificate."
msgstr ""
msgid "On this system, %s uses HTTPS certificates from the system Certificate Store or Keychain."
msgstr ""
msgid "To use a custom CA file, please import your CA file into Certificate Store / Keychain."
msgstr ""
msgid "Send to print"
msgstr ""
msgid "Upload"
msgstr ""
msgid "Upload and Print"
msgstr ""
msgid "Use forward slashes ( / ) as a directory separator if needed."
msgstr ""
msgid "Supports Painting" msgid "Supports Painting"
msgstr "" msgstr ""
@ -3197,6 +3174,9 @@ msgstr ""
msgid "Retraction test" msgid "Retraction test"
msgstr "" msgstr ""
msgid "Orca Tolerance Test"
msgstr ""
msgid "Max flowrate" msgid "Max flowrate"
msgstr "" msgstr ""
@ -4978,8 +4958,8 @@ msgstr ""
msgid "" msgid ""
"When recording timelapse without toolhead, it is recommended to add a " "When recording timelapse without toolhead, it is recommended to add a "
"\"Timelapse Wipe Tower\" \n" "\"Timelapse Wipe Tower\" \n"
"by right-click the empty position of build plate and choose \"Add " "by right-click the empty position of build plate and choose \"Add Primitive"
"Primitive\"->\"Timelapse Wipe Tower\"." "\"->\"Timelapse Wipe Tower\"."
msgstr "" msgstr ""
msgid "Line width" msgid "Line width"
@ -7066,10 +7046,10 @@ msgstr ""
msgid "" msgid ""
"Fan speed will be ramped up linearly from zero at layer " "Fan speed will be ramped up linearly from zero at layer "
"\"close_fan_the_first_x_layers\" to maximum at layer " "\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower " "\". \"full_fan_speed_layer\" will be ignored if lower than "
"than \"close_fan_the_first_x_layers\", in which case the fan will be running " "\"close_fan_the_first_x_layers\", in which case the fan will be running at "
"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." "maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
msgstr "" msgstr ""
msgid "Support interface fan speed" msgid "Support interface fan speed"
@ -8690,6 +8670,49 @@ msgstr ""
msgid "mm/mm" msgid "mm/mm"
msgstr "" msgstr ""
msgid "Physical Printer"
msgstr ""
msgid "Print Host upload"
msgstr ""
msgid "Test"
msgstr ""
msgid "Could not get a valid Printer Host reference"
msgstr ""
msgid "Success!"
msgstr ""
msgid "Refresh Printers"
msgstr ""
msgid ""
"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
"signed certificate."
msgstr ""
msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*"
msgstr ""
msgid "Open CA certificate file"
msgstr ""
#, possible-c-format, possible-boost-format
msgid ""
"On this system, %s uses HTTPS certificates from the system Certificate Store "
"or Keychain."
msgstr ""
msgid ""
"To use a custom CA file, please import your CA file into Certificate Store / "
"Keychain."
msgstr ""
msgid "Connection to printers connected via the print host failed."
msgstr ""
#: resources/data/hints.ini: [hint:3D Scene Operations] #: resources/data/hints.ini: [hint:3D Scene Operations]
msgid "3D Scene Operations\nDid you know how to control view and object/part selection with mouse and touchpanel in the 3D scene?" msgid "3D Scene Operations\nDid you know how to control view and object/part selection with mouse and touchpanel in the 3D scene?"
msgstr "" msgstr ""
@ -8789,4 +8812,3 @@ msgstr ""
#: resources/data/hints.ini: [hint:Improve strength] #: resources/data/hints.ini: [hint:Improve strength]
msgid "Improve strength\nDid you know that you can use more wall loops and higher sparse infill density to improve the strength of the model?" msgid "Improve strength\nDid you know that you can use more wall loops and higher sparse infill density to improve the strength of the model?"
msgstr "" msgstr ""

View file

@ -7,7 +7,7 @@ msgid ""
msgstr "" msgstr ""
"Project-Id-Version: \n" "Project-Id-Version: \n"
"Report-Msgid-Bugs-To: \n" "Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2023-04-29 20:13+0800\n" "POT-Creation-Date: 2023-05-14 11:27+0800\n"
"PO-Revision-Date: 2023-03-31 22:48+0200\n" "PO-Revision-Date: 2023-03-31 22:48+0200\n"
"Last-Translator: Momo <renemosner@seznam.cz>\n" "Last-Translator: Momo <renemosner@seznam.cz>\n"
"Language-Team: \n" "Language-Team: \n"
@ -3350,6 +3350,12 @@ msgstr "Průtok"
msgid "Pressure advance" msgid "Pressure advance"
msgstr "Předstih tlaku" msgstr "Předstih tlaku"
msgid "Retraction test"
msgstr ""
msgid "Orca Tolerance Test"
msgstr ""
msgid "Max flowrate" msgid "Max flowrate"
msgstr "Max. průtok" msgstr "Max. průtok"
@ -5319,9 +5325,6 @@ msgstr "Výstup G-kódu"
msgid "Post-processing Scripts" msgid "Post-processing Scripts"
msgstr "Skripty Post-processing" msgstr "Skripty Post-processing"
msgid "Post-processing scripts"
msgstr ""
msgid "Frequent" msgid "Frequent"
msgstr "Časté" msgstr "Časté"
@ -5458,6 +5461,12 @@ msgstr ""
msgid "Printable space" msgid "Printable space"
msgstr "Prostor pro tisk" msgstr "Prostor pro tisk"
msgid "Cooling Fan"
msgstr ""
msgid "Fan speed-up time"
msgstr ""
msgid "Extruder Clearance" msgid "Extruder Clearance"
msgstr "Vzdálenost extrudéru" msgstr "Vzdálenost extrudéru"
@ -6812,8 +6821,8 @@ msgstr ""
"jak velká šířka linky bez podpěry spodní vrstvy. 0% znamená vynucení " "jak velká šířka linky bez podpěry spodní vrstvy. 0% znamená vynucení "
"chlazení pro celou vnější stěnu bez ohledu na míru převisu" "chlazení pro celou vnější stěnu bez ohledu na míru převisu"
msgid "Bridge direction" msgid "Bridge infill direction"
msgstr "Směr mostu" msgstr "Směr výplně mostu"
msgid "" msgid ""
"Bridging angle override. If left to zero, the bridging angle will be " "Bridging angle override. If left to zero, the bridging angle will be "
@ -7404,14 +7413,6 @@ msgid ""
"of line" "of line"
msgstr "Úhel pro vzor řídké výplně, který řídí začátek nebo hlavní směr linky" msgstr "Úhel pro vzor řídké výplně, který řídí začátek nebo hlavní směr linky"
msgid "Bridge infill direction"
msgstr "Směr výplně mostu"
msgid ""
"Angle for bridge infill pattern, which controls the start or main direction "
"of line"
msgstr "Úhel pro vzor výplně mostu, který řídí začátek nebo hlavní směr linky"
msgid "Sparse infill density" msgid "Sparse infill density"
msgstr "Hustota řídké výplně" msgstr "Hustota řídké výplně"
@ -7565,6 +7566,14 @@ msgstr "Rychlost pohybu první vrstvy"
msgid "Travel speed of initial layer" msgid "Travel speed of initial layer"
msgstr "Cestovní rychlost počáteční vrstvy" msgstr "Cestovní rychlost počáteční vrstvy"
msgid "Number of slow layers"
msgstr ""
msgid ""
"The first few layers are printed slower than normal. The speed is gradually "
"increased in a linear fashion over the specified number of layers."
msgstr ""
msgid "Initial layer nozzle temperature" msgid "Initial layer nozzle temperature"
msgstr "Teplota trysky první vrstvy" msgstr "Teplota trysky první vrstvy"
@ -7574,6 +7583,24 @@ msgstr "Teplota trysky pro tisk první vrstvy při použití tohoto filamentu"
msgid "Full fan speed at layer" msgid "Full fan speed at layer"
msgstr "Maximální otáčky ventilátoru ve vrstvě" msgstr "Maximální otáčky ventilátoru ve vrstvě"
msgid ""
"Fan speed will be ramped up linearly from zero at layer "
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
"\". \"full_fan_speed_layer\" will be ignored if lower than "
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
msgstr ""
msgid "Support interface fan speed"
msgstr ""
msgid ""
"This fan speed is enforced during all support interfaces, to be able to "
"weaken their bonding with a high fan speed.\n"
"Set to -1 to disable this override.\n"
"Can only be overriden by disable_fan_first_layers."
msgstr ""
msgid "" msgid ""
"Randomly jitter while printing the wall, so that the surface has a rough " "Randomly jitter while printing the wall, so that the surface has a rough "
"look. This setting controls the fuzzy position" "look. This setting controls the fuzzy position"
@ -7697,6 +7724,35 @@ msgstr ""
msgid "Enable this option if machine has auxiliary part cooling fan" msgid "Enable this option if machine has auxiliary part cooling fan"
msgstr "Povolte tuto možnost, pokud má stroj pomocný chladicí ventilátor" msgstr "Povolte tuto možnost, pokud má stroj pomocný chladicí ventilátor"
msgid ""
"Start the fan this number of seconds earlier than its target start time (you "
"can use fractional seconds). It assumes infinite acceleration for this time "
"estimation, and will only take into account G1 and G0 moves (arc fitting is "
"unsupported).\n"
"It won't move fan comands from custom gcodes (they act as a sort of "
"'barrier').\n"
"It won't move fan comands into the start gcode if the 'only custom start "
"gcode' is activated.\n"
"Use 0 to deactivate."
msgstr ""
msgid "Only overhangs"
msgstr ""
msgid "Will only take into account the delay for the cooling of overhangs."
msgstr ""
msgid "Fan kick-start time"
msgstr ""
msgid ""
"Emit a max fan speed command for this amount of seconds before reducing to "
"target speed to kick-start the cooling fan.\n"
"This is useful for fans where a low PWM/power may be insufficient to get the "
"fan started spinning from a stop, or to get the fan up to speed faster.\n"
"Set to 0 to deactivate."
msgstr ""
msgid "G-code flavor" msgid "G-code flavor"
msgstr "Druh G-code" msgstr "Druh G-code"
@ -8252,8 +8308,8 @@ msgstr "Mezera švu"
msgid "" msgid ""
"In order to reduce the visibility of the seam in a closed loop extrusion, " "In order to reduce the visibility of the seam in a closed loop extrusion, "
"the loop is interrupted and shortened by a specified amount.\n" "the loop is interrupted and shortened by a specified amount.\n"
"This amount can be specified in millimeters or as a percentage of the current " "This amount can be specified in millimeters or as a percentage of the "
"extruder diameter. The default value for this parameter is 15%." "current extruder diameter. The default value for this parameter is 15%."
msgstr "" msgstr ""
"Aby se snížila viditelnost švu při vytlačování s uzavřenou smyčkou, smyčka " "Aby se snížila viditelnost švu při vytlačování s uzavřenou smyčkou, smyčka "
"se přeruší a zkrátí o zadanou hodnotu.\n" "se přeruší a zkrátí o zadanou hodnotu.\n"
@ -9388,6 +9444,58 @@ msgstr ""
"start > 10 kroků >= 0\n" "start > 10 kroků >= 0\n"
"konec > začátek + krok)" "konec > začátek + krok)"
msgid "Start retraction length: "
msgstr ""
msgid "End retraction length: "
msgstr ""
msgid "mm/mm"
msgstr ""
msgid "Physical Printer"
msgstr ""
msgid "Print Host upload"
msgstr ""
msgid "Test"
msgstr ""
msgid "Could not get a valid Printer Host reference"
msgstr ""
msgid "Success!"
msgstr ""
msgid "Refresh Printers"
msgstr ""
msgid ""
"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
"signed certificate."
msgstr ""
msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*"
msgstr ""
msgid "Open CA certificate file"
msgstr ""
#, c-format, boost-format
msgid ""
"On this system, %s uses HTTPS certificates from the system Certificate Store "
"or Keychain."
msgstr ""
msgid ""
"To use a custom CA file, please import your CA file into Certificate Store / "
"Keychain."
msgstr ""
msgid "Connection to printers connected via the print host failed."
msgstr ""
#: resources/data/hints.ini: [hint:3D Scene Operations] #: resources/data/hints.ini: [hint:3D Scene Operations]
msgid "" msgid ""
"3D Scene Operations\n" "3D Scene Operations\n"
@ -9653,6 +9761,15 @@ msgstr ""
"Did jste, že ke zlepšení pevnosti modelu můžete použít více smyček na stěně " "Did jste, že ke zlepšení pevnosti modelu můžete použít více smyček na stěně "
"a vyšší hustotu výplně?" "a vyšší hustotu výplně?"
#~ msgid "Bridge direction"
#~ msgstr "Směr mostu"
#~ msgid ""
#~ "Angle for bridge infill pattern, which controls the start or main "
#~ "direction of line"
#~ msgstr ""
#~ "Úhel pro vzor výplně mostu, který řídí začátek nebo hlavní směr linky"
#~ msgid "Keep upper part" #~ msgid "Keep upper part"
#~ msgstr "Zachovat horní část" #~ msgstr "Zachovat horní část"

View file

@ -2,7 +2,7 @@ msgid ""
msgstr "" msgstr ""
"Project-Id-Version: Orca Slicer\n" "Project-Id-Version: Orca Slicer\n"
"Report-Msgid-Bugs-To: \n" "Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2023-05-08 16:37+0200\n" "POT-Creation-Date: 2023-05-14 11:27+0800\n"
"PO-Revision-Date: \n" "PO-Revision-Date: \n"
"Last-Translator: Heiko Liebscher <hliebschergmail.com>\n" "Last-Translator: Heiko Liebscher <hliebschergmail.com>\n"
"Language-Team: \n" "Language-Team: \n"
@ -13,46 +13,6 @@ msgstr ""
"Plural-Forms: nplurals=2; plural=(n==1) ? 0 : 1;\n" "Plural-Forms: nplurals=2; plural=(n==1) ? 0 : 1;\n"
"X-Generator: Poedit 3.2.2\n" "X-Generator: Poedit 3.2.2\n"
#, fuzzy
msgid "Physical Printer"
msgstr "Drucker"
msgid ""
"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
"signed certificate."
msgstr ""
"Die HTTPS-CA-Datei ist optional. Sie wird nur benötigt, wenn Sie HTTPS mit "
"einem selbstsignierten Zertifikat verwenden."
msgid ""
"On this system, %s uses HTTPS certificates from the system Certificate Store "
"or Keychain."
msgstr ""
"Auf diesem System verwendet %s HTTPS-Zertifikate aus dem "
"Systemzertifikatspeicher oder dem Schlüsselbund."
msgid ""
"To use a custom CA file, please import your CA file into Certificate Store / "
"Keychain."
msgstr ""
"Um eine benutzerdefinierte CA-Datei zu verwenden, importieren Sie bitte Ihre "
"CA-Datei in den Zertifikatspeicher / das Schlüsselbund."
#, fuzzy
msgid "Send to print"
msgstr "Zum Drucker senden"
#, fuzzy
msgid "Upload"
msgstr "Entladen"
msgid "Upload and Print"
msgstr "Hochladen und Drucken"
msgid "Use forward slashes ( / ) as a directory separator if needed."
msgstr ""
"Verwenden Sie bei Bedarf Schrägstriche (/) als Verzeichnistrennzeichen."
msgid "Supports Painting" msgid "Supports Painting"
msgstr "Stützen aufmalen" msgstr "Stützen aufmalen"
@ -3480,6 +3440,9 @@ msgstr "Pressure advance"
msgid "Retraction test" msgid "Retraction test"
msgstr "Rückzugslängen Test" msgstr "Rückzugslängen Test"
msgid "Orca Tolerance Test"
msgstr ""
msgid "Max flowrate" msgid "Max flowrate"
msgstr "Maximale Durchflussrate" msgstr "Maximale Durchflussrate"
@ -5458,13 +5421,13 @@ msgstr ""
msgid "" msgid ""
"When recording timelapse without toolhead, it is recommended to add a " "When recording timelapse without toolhead, it is recommended to add a "
"\"Timelapse Wipe Tower\" \n" "\"Timelapse Wipe Tower\" \n"
"by right-click the empty position of build plate and choose \"Add " "by right-click the empty position of build plate and choose \"Add Primitive"
"Primitive\"->\"Timelapse Wipe Tower\"." "\"->\"Timelapse Wipe Tower\"."
msgstr "" msgstr ""
"Wenn Sie einen Zeitraffer ohne Werkzeugkopf aufnehmen, wird empfohlen, einen " "Wenn Sie einen Zeitraffer ohne Werkzeugkopf aufnehmen, wird empfohlen, einen "
"\"Timelapse Wischturm\" hinzuzufügen, indem Sie mit der rechten Maustaste " "\"Timelapse Wischturm\" hinzuzufügen, indem Sie mit der rechten Maustaste "
"auf die leere Position der Bauplatte klicken und \"Primitiv hinzufügen\"-" "auf die leere Position der Bauplatte klicken und \"Primitiv hinzufügen\"->"
">\"Timelapse Wischturm\" wählen." "\"Timelapse Wischturm\" wählen."
msgid "Line width" msgid "Line width"
msgstr "Breite der Linie" msgstr "Breite der Linie"
@ -7894,13 +7857,13 @@ msgstr "Volle Lüfterdrehzahl ab Schicht"
msgid "" msgid ""
"Fan speed will be ramped up linearly from zero at layer " "Fan speed will be ramped up linearly from zero at layer "
"\"close_fan_the_first_x_layers\" to maximum at layer " "\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower " "\". \"full_fan_speed_layer\" will be ignored if lower than "
"than \"close_fan_the_first_x_layers\", in which case the fan will be running " "\"close_fan_the_first_x_layers\", in which case the fan will be running at "
"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." "maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
msgstr "" msgstr ""
"Die Lüftergeschwindigkeit wird linear von Null bei der " "Die Lüftergeschwindigkeit wird linear von Null bei der Schicht"
"Schicht\"close_fan_the_first_x_layers\" auf das Maximum bei der Schicht " "\"close_fan_the_first_x_layers\" auf das Maximum bei der Schicht "
"\"full_fan_speed_layer\" erhöht. \"full_fan_speed_layer\" wird ignoriert, " "\"full_fan_speed_layer\" erhöht. \"full_fan_speed_layer\" wird ignoriert, "
"wenn es niedriger ist als \"close_fan_the_first_x_layers\",in diesem Fall " "wenn es niedriger ist als \"close_fan_the_first_x_layers\",in diesem Fall "
"läuft der Lüfter bei Schicht \"close_fan_the_first_x_layers\"+ 1 mit maximal " "läuft der Lüfter bei Schicht \"close_fan_the_first_x_layers\"+ 1 mit maximal "
@ -9876,6 +9839,56 @@ msgstr "Ende Rückzugslänge"
msgid "mm/mm" msgid "mm/mm"
msgstr "" msgstr ""
#, fuzzy
msgid "Physical Printer"
msgstr "Drucker"
msgid "Print Host upload"
msgstr ""
msgid "Test"
msgstr ""
msgid "Could not get a valid Printer Host reference"
msgstr ""
msgid "Success!"
msgstr ""
msgid "Refresh Printers"
msgstr ""
msgid ""
"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
"signed certificate."
msgstr ""
"Die HTTPS-CA-Datei ist optional. Sie wird nur benötigt, wenn Sie HTTPS mit "
"einem selbstsignierten Zertifikat verwenden."
msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*"
msgstr ""
msgid "Open CA certificate file"
msgstr ""
#, c-format, boost-format
msgid ""
"On this system, %s uses HTTPS certificates from the system Certificate Store "
"or Keychain."
msgstr ""
"Auf diesem System verwendet %s HTTPS-Zertifikate aus dem "
"Systemzertifikatspeicher oder dem Schlüsselbund."
msgid ""
"To use a custom CA file, please import your CA file into Certificate Store / "
"Keychain."
msgstr ""
"Um eine benutzerdefinierte CA-Datei zu verwenden, importieren Sie bitte Ihre "
"CA-Datei in den Zertifikatspeicher / das Schlüsselbund."
msgid "Connection to printers connected via the print host failed."
msgstr ""
#: resources/data/hints.ini: [hint:3D Scene Operations] #: resources/data/hints.ini: [hint:3D Scene Operations]
msgid "" msgid ""
"3D Scene Operations\n" "3D Scene Operations\n"
@ -10149,6 +10162,21 @@ msgstr ""
"Wussten Sie, dass Sie die Festigkeit des Modells durch mehr Wandschleifen " "Wussten Sie, dass Sie die Festigkeit des Modells durch mehr Wandschleifen "
"und eine höhere Dichte der Füllung verbessern können?" "und eine höhere Dichte der Füllung verbessern können?"
#, fuzzy
#~ msgid "Send to print"
#~ msgstr "Zum Drucker senden"
#, fuzzy
#~ msgid "Upload"
#~ msgstr "Entladen"
#~ msgid "Upload and Print"
#~ msgstr "Hochladen und Drucken"
#~ msgid "Use forward slashes ( / ) as a directory separator if needed."
#~ msgstr ""
#~ "Verwenden Sie bei Bedarf Schrägstriche (/) als Verzeichnistrennzeichen."
#, fuzzy #, fuzzy
#~ msgid "Fan Speedup Time" #~ msgid "Fan Speedup Time"
#~ msgstr "Lüftergeschwindigkeit: " #~ msgstr "Lüftergeschwindigkeit: "

View file

@ -2,7 +2,7 @@ msgid ""
msgstr "" msgstr ""
"Project-Id-Version: Orca Slicer\n" "Project-Id-Version: Orca Slicer\n"
"Report-Msgid-Bugs-To: \n" "Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2023-05-08 16:37+0200\n" "POT-Creation-Date: 2023-05-14 11:27+0800\n"
"PO-Revision-Date: \n" "PO-Revision-Date: \n"
"Last-Translator: \n" "Last-Translator: \n"
"Language-Team: \n" "Language-Team: \n"
@ -13,40 +13,6 @@ msgstr ""
"Plural-Forms: nplurals=2; plural=(n==1) ? 0 : 1;\n" "Plural-Forms: nplurals=2; plural=(n==1) ? 0 : 1;\n"
"X-Generator: Poedit 3.1\n" "X-Generator: Poedit 3.1\n"
#, fuzzy
msgid "Physical Printer"
msgstr "Printer"
msgid ""
"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
"signed certificate."
msgstr ""
msgid ""
"On this system, %s uses HTTPS certificates from the system Certificate Store "
"or Keychain."
msgstr ""
msgid ""
"To use a custom CA file, please import your CA file into Certificate Store / "
"Keychain."
msgstr ""
#, fuzzy
msgid "Send to print"
msgstr "Send to printer"
#, fuzzy
msgid "Upload"
msgstr "Unload"
#, fuzzy
msgid "Upload and Print"
msgstr "Uploading"
msgid "Use forward slashes ( / ) as a directory separator if needed."
msgstr ""
msgid "Supports Painting" msgid "Supports Painting"
msgstr "Support Painting" msgstr "Support Painting"
@ -3314,6 +3280,9 @@ msgstr ""
msgid "Retraction test" msgid "Retraction test"
msgstr "" msgstr ""
msgid "Orca Tolerance Test"
msgstr ""
msgid "Max flowrate" msgid "Max flowrate"
msgstr "" msgstr ""
@ -5118,13 +5087,13 @@ msgstr ""
msgid "" msgid ""
"When recording timelapse without toolhead, it is recommended to add a " "When recording timelapse without toolhead, it is recommended to add a "
"\"Timelapse Wipe Tower\" \n" "\"Timelapse Wipe Tower\" \n"
"by right-click the empty position of build plate and choose \"Add " "by right-click the empty position of build plate and choose \"Add Primitive"
"Primitive\"->\"Timelapse Wipe Tower\"." "\"->\"Timelapse Wipe Tower\"."
msgstr "" msgstr ""
"When recording timelapse without toolhead, it is recommended to add a " "When recording timelapse without toolhead, it is recommended to add a "
"\"Timelapse Wipe Tower\" \n" "\"Timelapse Wipe Tower\" \n"
"by right-click the empty position of build plate and choose \"Add " "by right-click the empty position of build plate and choose \"Add Primitive"
"Primitive\"->\"Timelapse Wipe Tower\"." "\"->\"Timelapse Wipe Tower\"."
msgid "Line width" msgid "Line width"
msgstr "Line width" msgstr "Line width"
@ -7364,10 +7333,10 @@ msgstr "Full fan speed at layer"
msgid "" msgid ""
"Fan speed will be ramped up linearly from zero at layer " "Fan speed will be ramped up linearly from zero at layer "
"\"close_fan_the_first_x_layers\" to maximum at layer " "\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower " "\". \"full_fan_speed_layer\" will be ignored if lower than "
"than \"close_fan_the_first_x_layers\", in which case the fan will be running " "\"close_fan_the_first_x_layers\", in which case the fan will be running at "
"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." "maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
msgstr "" msgstr ""
msgid "Support interface fan speed" msgid "Support interface fan speed"
@ -9103,6 +9072,50 @@ msgstr "Retraction Length"
msgid "mm/mm" msgid "mm/mm"
msgstr "" msgstr ""
#, fuzzy
msgid "Physical Printer"
msgstr "Printer"
msgid "Print Host upload"
msgstr ""
msgid "Test"
msgstr ""
msgid "Could not get a valid Printer Host reference"
msgstr ""
msgid "Success!"
msgstr ""
msgid "Refresh Printers"
msgstr ""
msgid ""
"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
"signed certificate."
msgstr ""
msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*"
msgstr ""
msgid "Open CA certificate file"
msgstr ""
#, c-format, boost-format
msgid ""
"On this system, %s uses HTTPS certificates from the system Certificate Store "
"or Keychain."
msgstr ""
msgid ""
"To use a custom CA file, please import your CA file into Certificate Store / "
"Keychain."
msgstr ""
msgid "Connection to printers connected via the print host failed."
msgstr ""
#: resources/data/hints.ini: [hint:3D Scene Operations] #: resources/data/hints.ini: [hint:3D Scene Operations]
msgid "" msgid ""
"3D Scene Operations\n" "3D Scene Operations\n"
@ -9287,6 +9300,18 @@ msgid ""
"density to improve the strength of the model?" "density to improve the strength of the model?"
msgstr "" msgstr ""
#, fuzzy
#~ msgid "Send to print"
#~ msgstr "Send to printer"
#, fuzzy
#~ msgid "Upload"
#~ msgstr "Unload"
#, fuzzy
#~ msgid "Upload and Print"
#~ msgstr "Uploading"
#~ msgid "Keep upper part" #~ msgid "Keep upper part"
#~ msgstr "Keep upper part" #~ msgstr "Keep upper part"

View file

@ -2,7 +2,7 @@ msgid ""
msgstr "" msgstr ""
"Project-Id-Version: Orca Slicer\n" "Project-Id-Version: Orca Slicer\n"
"Report-Msgid-Bugs-To: \n" "Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2023-04-29 20:13+0800\n" "POT-Creation-Date: 2023-05-14 11:27+0800\n"
"Language: es\n" "Language: es\n"
"MIME-Version: 1.0\n" "MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n" "Content-Type: text/plain; charset=UTF-8\n"
@ -3311,6 +3311,12 @@ msgstr ""
msgid "Pressure advance" msgid "Pressure advance"
msgstr "" msgstr ""
msgid "Retraction test"
msgstr ""
msgid "Orca Tolerance Test"
msgstr ""
msgid "Max flowrate" msgid "Max flowrate"
msgstr "" msgstr ""
@ -5209,9 +5215,6 @@ msgstr ""
msgid "Post-processing Scripts" msgid "Post-processing Scripts"
msgstr "" msgstr ""
msgid "Post-processing scripts"
msgstr ""
msgid "Frequent" msgid "Frequent"
msgstr "Frecuente" msgstr "Frecuente"
@ -5353,6 +5356,12 @@ msgstr "Final del Código G de filamento "
msgid "Printable space" msgid "Printable space"
msgstr "Espacio imprimible" msgstr "Espacio imprimible"
msgid "Cooling Fan"
msgstr ""
msgid "Fan speed-up time"
msgstr ""
msgid "Extruder Clearance" msgid "Extruder Clearance"
msgstr "" msgstr ""
@ -6677,7 +6686,7 @@ msgid ""
"all outer wall no matter how much overhang degree" "all outer wall no matter how much overhang degree"
msgstr "" msgstr ""
msgid "Bridge direction" msgid "Bridge infill direction"
msgstr "" msgstr ""
msgid "" msgid ""
@ -7247,14 +7256,6 @@ msgstr ""
"Ángulo para el patrón de relleno disperso, que controla el inicio o la " "Ángulo para el patrón de relleno disperso, que controla el inicio o la "
"dirección principal de la línea" "dirección principal de la línea"
msgid "Bridge infill direction"
msgstr ""
msgid ""
"Angle for bridge infill pattern, which controls the start or main direction "
"of line"
msgstr ""
msgid "Sparse infill density" msgid "Sparse infill density"
msgstr "Densidad de relleno" msgstr "Densidad de relleno"
@ -7404,6 +7405,14 @@ msgstr ""
msgid "Travel speed of initial layer" msgid "Travel speed of initial layer"
msgstr "" msgstr ""
msgid "Number of slow layers"
msgstr ""
msgid ""
"The first few layers are printed slower than normal. The speed is gradually "
"increased in a linear fashion over the specified number of layers."
msgstr ""
msgid "Initial layer nozzle temperature" msgid "Initial layer nozzle temperature"
msgstr "Temperatura de la boquilla de la capa inicial" msgstr "Temperatura de la boquilla de la capa inicial"
@ -7415,6 +7424,24 @@ msgstr ""
msgid "Full fan speed at layer" msgid "Full fan speed at layer"
msgstr "Velocidad máxima del ventilador en la capa" msgstr "Velocidad máxima del ventilador en la capa"
msgid ""
"Fan speed will be ramped up linearly from zero at layer "
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
"\". \"full_fan_speed_layer\" will be ignored if lower than "
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
msgstr ""
msgid "Support interface fan speed"
msgstr ""
msgid ""
"This fan speed is enforced during all support interfaces, to be able to "
"weaken their bonding with a high fan speed.\n"
"Set to -1 to disable this override.\n"
"Can only be overriden by disable_fan_first_layers."
msgstr ""
msgid "" msgid ""
"Randomly jitter while printing the wall, so that the surface has a rough " "Randomly jitter while printing the wall, so that the surface has a rough "
"look. This setting controls the fuzzy position" "look. This setting controls the fuzzy position"
@ -7538,6 +7565,35 @@ msgstr ""
"Habilite esta opción si la máquina tiene un ventilador auxiliar de " "Habilite esta opción si la máquina tiene un ventilador auxiliar de "
"refrigeración de piezas" "refrigeración de piezas"
msgid ""
"Start the fan this number of seconds earlier than its target start time (you "
"can use fractional seconds). It assumes infinite acceleration for this time "
"estimation, and will only take into account G1 and G0 moves (arc fitting is "
"unsupported).\n"
"It won't move fan comands from custom gcodes (they act as a sort of "
"'barrier').\n"
"It won't move fan comands into the start gcode if the 'only custom start "
"gcode' is activated.\n"
"Use 0 to deactivate."
msgstr ""
msgid "Only overhangs"
msgstr ""
msgid "Will only take into account the delay for the cooling of overhangs."
msgstr ""
msgid "Fan kick-start time"
msgstr ""
msgid ""
"Emit a max fan speed command for this amount of seconds before reducing to "
"target speed to kick-start the cooling fan.\n"
"This is useful for fans where a low PWM/power may be insufficient to get the "
"fan started spinning from a stop, or to get the fan up to speed faster.\n"
"Set to 0 to deactivate."
msgstr ""
msgid "G-code flavor" msgid "G-code flavor"
msgstr "Tipo de código G" msgstr "Tipo de código G"
@ -8082,8 +8138,8 @@ msgstr ""
msgid "" msgid ""
"In order to reduce the visibility of the seam in a closed loop extrusion, " "In order to reduce the visibility of the seam in a closed loop extrusion, "
"the loop is interrupted and shortened by a specified amount.\n" "the loop is interrupted and shortened by a specified amount.\n"
"This amount can be specified in millimeters or as a percentage of the current " "This amount can be specified in millimeters or as a percentage of the "
"extruder diameter. The default value for this parameter is 15%." "current extruder diameter. The default value for this parameter is 15%."
msgstr "" msgstr ""
msgid "Role base wipe speed" msgid "Role base wipe speed"
@ -9122,6 +9178,58 @@ msgid ""
"end > start + step)" "end > start + step)"
msgstr "" msgstr ""
msgid "Start retraction length: "
msgstr ""
msgid "End retraction length: "
msgstr ""
msgid "mm/mm"
msgstr ""
msgid "Physical Printer"
msgstr ""
msgid "Print Host upload"
msgstr ""
msgid "Test"
msgstr ""
msgid "Could not get a valid Printer Host reference"
msgstr ""
msgid "Success!"
msgstr ""
msgid "Refresh Printers"
msgstr ""
msgid ""
"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
"signed certificate."
msgstr ""
msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*"
msgstr ""
msgid "Open CA certificate file"
msgstr ""
#, c-format, boost-format
msgid ""
"On this system, %s uses HTTPS certificates from the system Certificate Store "
"or Keychain."
msgstr ""
msgid ""
"To use a custom CA file, please import your CA file into Certificate Store / "
"Keychain."
msgstr ""
msgid "Connection to printers connected via the print host failed."
msgstr ""
#: resources/data/hints.ini: [hint:3D Scene Operations] #: resources/data/hints.ini: [hint:3D Scene Operations]
msgid "" msgid ""
"3D Scene Operations\n" "3D Scene Operations\n"

File diff suppressed because it is too large Load diff

View file

@ -2,7 +2,7 @@ msgid ""
msgstr "" msgstr ""
"Project-Id-Version: Orca Slicer\n" "Project-Id-Version: Orca Slicer\n"
"Report-Msgid-Bugs-To: \n" "Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2023-04-29 20:13+0800\n" "POT-Creation-Date: 2023-05-14 11:27+0800\n"
"Language: hu\n" "Language: hu\n"
"MIME-Version: 1.0\n" "MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n" "Content-Type: text/plain; charset=UTF-8\n"
@ -3302,6 +3302,12 @@ msgstr ""
msgid "Pressure advance" msgid "Pressure advance"
msgstr "" msgstr ""
msgid "Retraction test"
msgstr ""
msgid "Orca Tolerance Test"
msgstr ""
msgid "Max flowrate" msgid "Max flowrate"
msgstr "" msgstr ""
@ -5185,9 +5191,6 @@ msgstr "G-kód kimenet"
msgid "Post-processing Scripts" msgid "Post-processing Scripts"
msgstr "" msgstr ""
msgid "Post-processing scripts"
msgstr ""
msgid "Frequent" msgid "Frequent"
msgstr "Gyakori" msgstr "Gyakori"
@ -5326,6 +5329,12 @@ msgstr "Filament befejező G-kód"
msgid "Printable space" msgid "Printable space"
msgstr "Nyomtatási terület" msgstr "Nyomtatási terület"
msgid "Cooling Fan"
msgstr ""
msgid "Fan speed-up time"
msgstr ""
msgid "Extruder Clearance" msgid "Extruder Clearance"
msgstr "" msgstr ""
@ -6645,7 +6654,7 @@ msgid ""
"all outer wall no matter how much overhang degree" "all outer wall no matter how much overhang degree"
msgstr "" msgstr ""
msgid "Bridge direction" msgid "Bridge infill direction"
msgstr "" msgstr ""
msgid "" msgid ""
@ -7214,14 +7223,6 @@ msgstr ""
"A ritkás kitöltési minta szöge, amely a vonal kezdő- vagy fő irányát " "A ritkás kitöltési minta szöge, amely a vonal kezdő- vagy fő irányát "
"szabályozza" "szabályozza"
msgid "Bridge infill direction"
msgstr ""
msgid ""
"Angle for bridge infill pattern, which controls the start or main direction "
"of line"
msgstr ""
msgid "Sparse infill density" msgid "Sparse infill density"
msgstr "Kitöltés sűrűsége" msgstr "Kitöltés sűrűsége"
@ -7371,6 +7372,14 @@ msgstr ""
msgid "Travel speed of initial layer" msgid "Travel speed of initial layer"
msgstr "" msgstr ""
msgid "Number of slow layers"
msgstr ""
msgid ""
"The first few layers are printed slower than normal. The speed is gradually "
"increased in a linear fashion over the specified number of layers."
msgstr ""
msgid "Initial layer nozzle temperature" msgid "Initial layer nozzle temperature"
msgstr "Az első réteg fúvóka hőmérséklete" msgstr "Az első réteg fúvóka hőmérséklete"
@ -7380,6 +7389,24 @@ msgstr "A fúvóka hőmérséklete az első réteg nyomtatásakor ezzel a filame
msgid "Full fan speed at layer" msgid "Full fan speed at layer"
msgstr "Teljes ventilátor fordulatszám ennél a rétegnél" msgstr "Teljes ventilátor fordulatszám ennél a rétegnél"
msgid ""
"Fan speed will be ramped up linearly from zero at layer "
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
"\". \"full_fan_speed_layer\" will be ignored if lower than "
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
msgstr ""
msgid "Support interface fan speed"
msgstr ""
msgid ""
"This fan speed is enforced during all support interfaces, to be able to "
"weaken their bonding with a high fan speed.\n"
"Set to -1 to disable this override.\n"
"Can only be overriden by disable_fan_first_layers."
msgstr ""
msgid "" msgid ""
"Randomly jitter while printing the wall, so that the surface has a rough " "Randomly jitter while printing the wall, so that the surface has a rough "
"look. This setting controls the fuzzy position" "look. This setting controls the fuzzy position"
@ -7502,6 +7529,35 @@ msgstr ""
"Engedélyezd ezt az opciót, ha a gép rendelkezik kiegészítő tárgyhűtő " "Engedélyezd ezt az opciót, ha a gép rendelkezik kiegészítő tárgyhűtő "
"ventilátorral" "ventilátorral"
msgid ""
"Start the fan this number of seconds earlier than its target start time (you "
"can use fractional seconds). It assumes infinite acceleration for this time "
"estimation, and will only take into account G1 and G0 moves (arc fitting is "
"unsupported).\n"
"It won't move fan comands from custom gcodes (they act as a sort of "
"'barrier').\n"
"It won't move fan comands into the start gcode if the 'only custom start "
"gcode' is activated.\n"
"Use 0 to deactivate."
msgstr ""
msgid "Only overhangs"
msgstr ""
msgid "Will only take into account the delay for the cooling of overhangs."
msgstr ""
msgid "Fan kick-start time"
msgstr ""
msgid ""
"Emit a max fan speed command for this amount of seconds before reducing to "
"target speed to kick-start the cooling fan.\n"
"This is useful for fans where a low PWM/power may be insufficient to get the "
"fan started spinning from a stop, or to get the fan up to speed faster.\n"
"Set to 0 to deactivate."
msgstr ""
msgid "G-code flavor" msgid "G-code flavor"
msgstr "G-kód változat" msgstr "G-kód változat"
@ -8046,8 +8102,8 @@ msgstr ""
msgid "" msgid ""
"In order to reduce the visibility of the seam in a closed loop extrusion, " "In order to reduce the visibility of the seam in a closed loop extrusion, "
"the loop is interrupted and shortened by a specified amount.\n" "the loop is interrupted and shortened by a specified amount.\n"
"This amount can be specified in millimeters or as a percentage of the current " "This amount can be specified in millimeters or as a percentage of the "
"extruder diameter. The default value for this parameter is 15%." "current extruder diameter. The default value for this parameter is 15%."
msgstr "" msgstr ""
msgid "Role base wipe speed" msgid "Role base wipe speed"
@ -9088,6 +9144,58 @@ msgid ""
"end > start + step)" "end > start + step)"
msgstr "" msgstr ""
msgid "Start retraction length: "
msgstr ""
msgid "End retraction length: "
msgstr ""
msgid "mm/mm"
msgstr ""
msgid "Physical Printer"
msgstr ""
msgid "Print Host upload"
msgstr ""
msgid "Test"
msgstr ""
msgid "Could not get a valid Printer Host reference"
msgstr ""
msgid "Success!"
msgstr ""
msgid "Refresh Printers"
msgstr ""
msgid ""
"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
"signed certificate."
msgstr ""
msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*"
msgstr ""
msgid "Open CA certificate file"
msgstr ""
#, c-format, boost-format
msgid ""
"On this system, %s uses HTTPS certificates from the system Certificate Store "
"or Keychain."
msgstr ""
msgid ""
"To use a custom CA file, please import your CA file into Certificate Store / "
"Keychain."
msgstr ""
msgid "Connection to printers connected via the print host failed."
msgstr ""
#: resources/data/hints.ini: [hint:3D Scene Operations] #: resources/data/hints.ini: [hint:3D Scene Operations]
msgid "" msgid ""
"3D Scene Operations\n" "3D Scene Operations\n"

View file

@ -2,7 +2,7 @@ msgid ""
msgstr "" msgstr ""
"Project-Id-Version: Orca Slicer\n" "Project-Id-Version: Orca Slicer\n"
"Report-Msgid-Bugs-To: \n" "Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2023-04-29 20:13+0800\n" "POT-Creation-Date: 2023-05-14 11:27+0800\n"
"Language: it\n" "Language: it\n"
"MIME-Version: 1.0\n" "MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n" "Content-Type: text/plain; charset=UTF-8\n"
@ -3276,6 +3276,12 @@ msgstr ""
msgid "Pressure advance" msgid "Pressure advance"
msgstr "" msgstr ""
msgid "Retraction test"
msgstr ""
msgid "Orca Tolerance Test"
msgstr ""
msgid "Max flowrate" msgid "Max flowrate"
msgstr "" msgstr ""
@ -5147,9 +5153,6 @@ msgstr ""
msgid "Post-processing Scripts" msgid "Post-processing Scripts"
msgstr "" msgstr ""
msgid "Post-processing scripts"
msgstr ""
msgid "Frequent" msgid "Frequent"
msgstr "Frequent" msgstr "Frequent"
@ -5285,6 +5288,12 @@ msgstr "Filament end G-code"
msgid "Printable space" msgid "Printable space"
msgstr "Printable space" msgstr "Printable space"
msgid "Cooling Fan"
msgstr ""
msgid "Fan speed-up time"
msgstr ""
msgid "Extruder Clearance" msgid "Extruder Clearance"
msgstr "" msgstr ""
@ -6591,7 +6600,7 @@ msgid ""
"all outer wall no matter how much overhang degree" "all outer wall no matter how much overhang degree"
msgstr "" msgstr ""
msgid "Bridge direction" msgid "Bridge infill direction"
msgstr "" msgstr ""
msgid "" msgid ""
@ -7154,14 +7163,6 @@ msgstr ""
"This is the angle for sparse infill pattern, which controls the start or " "This is the angle for sparse infill pattern, which controls the start or "
"main direction of lines." "main direction of lines."
msgid "Bridge infill direction"
msgstr ""
msgid ""
"Angle for bridge infill pattern, which controls the start or main direction "
"of line"
msgstr ""
msgid "Sparse infill density" msgid "Sparse infill density"
msgstr "Sparse infill density" msgstr "Sparse infill density"
@ -7312,6 +7313,14 @@ msgstr ""
msgid "Travel speed of initial layer" msgid "Travel speed of initial layer"
msgstr "" msgstr ""
msgid "Number of slow layers"
msgstr ""
msgid ""
"The first few layers are printed slower than normal. The speed is gradually "
"increased in a linear fashion over the specified number of layers."
msgstr ""
msgid "Initial layer nozzle temperature" msgid "Initial layer nozzle temperature"
msgstr "First layer nozzle temperature" msgstr "First layer nozzle temperature"
@ -7321,6 +7330,24 @@ msgstr "Nozzle temperature for printing the first layer with this filament"
msgid "Full fan speed at layer" msgid "Full fan speed at layer"
msgstr "Massima velocità della ventola al layer" msgstr "Massima velocità della ventola al layer"
msgid ""
"Fan speed will be ramped up linearly from zero at layer "
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
"\". \"full_fan_speed_layer\" will be ignored if lower than "
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
msgstr ""
msgid "Support interface fan speed"
msgstr ""
msgid ""
"This fan speed is enforced during all support interfaces, to be able to "
"weaken their bonding with a high fan speed.\n"
"Set to -1 to disable this override.\n"
"Can only be overriden by disable_fan_first_layers."
msgstr ""
msgid "" msgid ""
"Randomly jitter while printing the wall, so that the surface has a rough " "Randomly jitter while printing the wall, so that the surface has a rough "
"look. This setting controls the fuzzy position" "look. This setting controls the fuzzy position"
@ -7442,6 +7469,35 @@ msgstr ""
msgid "Enable this option if machine has auxiliary part cooling fan" msgid "Enable this option if machine has auxiliary part cooling fan"
msgstr "Enable this option if the machine has an auxiliary part cooling fan" msgstr "Enable this option if the machine has an auxiliary part cooling fan"
msgid ""
"Start the fan this number of seconds earlier than its target start time (you "
"can use fractional seconds). It assumes infinite acceleration for this time "
"estimation, and will only take into account G1 and G0 moves (arc fitting is "
"unsupported).\n"
"It won't move fan comands from custom gcodes (they act as a sort of "
"'barrier').\n"
"It won't move fan comands into the start gcode if the 'only custom start "
"gcode' is activated.\n"
"Use 0 to deactivate."
msgstr ""
msgid "Only overhangs"
msgstr ""
msgid "Will only take into account the delay for the cooling of overhangs."
msgstr ""
msgid "Fan kick-start time"
msgstr ""
msgid ""
"Emit a max fan speed command for this amount of seconds before reducing to "
"target speed to kick-start the cooling fan.\n"
"This is useful for fans where a low PWM/power may be insufficient to get the "
"fan started spinning from a stop, or to get the fan up to speed faster.\n"
"Set to 0 to deactivate."
msgstr ""
msgid "G-code flavor" msgid "G-code flavor"
msgstr "Formato G-code" msgstr "Formato G-code"
@ -7975,8 +8031,8 @@ msgstr ""
msgid "" msgid ""
"In order to reduce the visibility of the seam in a closed loop extrusion, " "In order to reduce the visibility of the seam in a closed loop extrusion, "
"the loop is interrupted and shortened by a specified amount.\n" "the loop is interrupted and shortened by a specified amount.\n"
"This amount can be specified in millimeters or as a percentage of the current " "This amount can be specified in millimeters or as a percentage of the "
"extruder diameter. The default value for this parameter is 15%." "current extruder diameter. The default value for this parameter is 15%."
msgstr "" msgstr ""
msgid "Role base wipe speed" msgid "Role base wipe speed"
@ -9006,6 +9062,58 @@ msgid ""
"end > start + step)" "end > start + step)"
msgstr "" msgstr ""
msgid "Start retraction length: "
msgstr ""
msgid "End retraction length: "
msgstr ""
msgid "mm/mm"
msgstr ""
msgid "Physical Printer"
msgstr ""
msgid "Print Host upload"
msgstr ""
msgid "Test"
msgstr ""
msgid "Could not get a valid Printer Host reference"
msgstr ""
msgid "Success!"
msgstr ""
msgid "Refresh Printers"
msgstr ""
msgid ""
"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
"signed certificate."
msgstr ""
msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*"
msgstr ""
msgid "Open CA certificate file"
msgstr ""
#, c-format, boost-format
msgid ""
"On this system, %s uses HTTPS certificates from the system Certificate Store "
"or Keychain."
msgstr ""
msgid ""
"To use a custom CA file, please import your CA file into Certificate Store / "
"Keychain."
msgstr ""
msgid "Connection to printers connected via the print host failed."
msgstr ""
#: resources/data/hints.ini: [hint:3D Scene Operations] #: resources/data/hints.ini: [hint:3D Scene Operations]
msgid "" msgid ""
"3D Scene Operations\n" "3D Scene Operations\n"

View file

@ -2,7 +2,7 @@ msgid ""
msgstr "" msgstr ""
"Project-Id-Version: Orca Slicer\n" "Project-Id-Version: Orca Slicer\n"
"Report-Msgid-Bugs-To: \n" "Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2023-04-29 20:13+0800\n" "POT-Creation-Date: 2023-05-14 11:27+0800\n"
"PO-Revision-Date: \n" "PO-Revision-Date: \n"
"Last-Translator: \n" "Last-Translator: \n"
"Language-Team: \n" "Language-Team: \n"
@ -3258,6 +3258,12 @@ msgstr ""
msgid "Pressure advance" msgid "Pressure advance"
msgstr "" msgstr ""
msgid "Retraction test"
msgstr ""
msgid "Orca Tolerance Test"
msgstr ""
msgid "Max flowrate" msgid "Max flowrate"
msgstr "" msgstr ""
@ -5160,9 +5166,6 @@ msgstr "G-code出力"
msgid "Post-processing Scripts" msgid "Post-processing Scripts"
msgstr "" msgstr ""
msgid "Post-processing scripts"
msgstr ""
msgid "Frequent" msgid "Frequent"
msgstr "よく使う" msgstr "よく使う"
@ -5292,6 +5295,12 @@ msgstr "フィラメント終了G-code"
msgid "Printable space" msgid "Printable space"
msgstr "造形可能領域" msgstr "造形可能領域"
msgid "Cooling Fan"
msgstr ""
msgid "Fan speed-up time"
msgstr ""
msgid "Extruder Clearance" msgid "Extruder Clearance"
msgstr "押出機クリアランス" msgstr "押出機クリアランス"
@ -6591,8 +6600,8 @@ msgstr ""
"how much width of the line without support from lower layer. 0% means " "how much width of the line without support from lower layer. 0% means "
"forcing cooling for all outer wall no matter the overhang degree." "forcing cooling for all outer wall no matter the overhang degree."
msgid "Bridge direction" msgid "Bridge infill direction"
msgstr "ブリッジ方向" msgstr ""
msgid "" msgid ""
"Bridging angle override. If left to zero, the bridging angle will be " "Bridging angle override. If left to zero, the bridging angle will be "
@ -7143,14 +7152,6 @@ msgid ""
"of line" "of line"
msgstr "スパース インフィル パターンの角度です" msgstr "スパース インフィル パターンの角度です"
msgid "Bridge infill direction"
msgstr ""
msgid ""
"Angle for bridge infill pattern, which controls the start or main direction "
"of line"
msgstr ""
msgid "Sparse infill density" msgid "Sparse infill density"
msgstr "充填密度" msgstr "充填密度"
@ -7295,6 +7296,14 @@ msgstr ""
msgid "Travel speed of initial layer" msgid "Travel speed of initial layer"
msgstr "" msgstr ""
msgid "Number of slow layers"
msgstr ""
msgid ""
"The first few layers are printed slower than normal. The speed is gradually "
"increased in a linear fashion over the specified number of layers."
msgstr ""
msgid "Initial layer nozzle temperature" msgid "Initial layer nozzle temperature"
msgstr "1層目のズル温度" msgstr "1層目のズル温度"
@ -7304,6 +7313,24 @@ msgstr "1層目でのズル温度"
msgid "Full fan speed at layer" msgid "Full fan speed at layer"
msgstr "最大回転速度の積層" msgstr "最大回転速度の積層"
msgid ""
"Fan speed will be ramped up linearly from zero at layer "
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
"\". \"full_fan_speed_layer\" will be ignored if lower than "
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
msgstr ""
msgid "Support interface fan speed"
msgstr ""
msgid ""
"This fan speed is enforced during all support interfaces, to be able to "
"weaken their bonding with a high fan speed.\n"
"Set to -1 to disable this override.\n"
"Can only be overriden by disable_fan_first_layers."
msgstr ""
msgid "" msgid ""
"Randomly jitter while printing the wall, so that the surface has a rough " "Randomly jitter while printing the wall, so that the surface has a rough "
"look. This setting controls the fuzzy position" "look. This setting controls the fuzzy position"
@ -7415,6 +7442,35 @@ msgstr "HRC"
msgid "Enable this option if machine has auxiliary part cooling fan" msgid "Enable this option if machine has auxiliary part cooling fan"
msgstr "パーツ補助冷却ファンがある場合有効にしてください" msgstr "パーツ補助冷却ファンがある場合有効にしてください"
msgid ""
"Start the fan this number of seconds earlier than its target start time (you "
"can use fractional seconds). It assumes infinite acceleration for this time "
"estimation, and will only take into account G1 and G0 moves (arc fitting is "
"unsupported).\n"
"It won't move fan comands from custom gcodes (they act as a sort of "
"'barrier').\n"
"It won't move fan comands into the start gcode if the 'only custom start "
"gcode' is activated.\n"
"Use 0 to deactivate."
msgstr ""
msgid "Only overhangs"
msgstr ""
msgid "Will only take into account the delay for the cooling of overhangs."
msgstr ""
msgid "Fan kick-start time"
msgstr ""
msgid ""
"Emit a max fan speed command for this amount of seconds before reducing to "
"target speed to kick-start the cooling fan.\n"
"This is useful for fans where a low PWM/power may be insufficient to get the "
"fan started spinning from a stop, or to get the fan up to speed faster.\n"
"Set to 0 to deactivate."
msgstr ""
msgid "G-code flavor" msgid "G-code flavor"
msgstr "G-codeスタイル" msgstr "G-codeスタイル"
@ -7936,8 +7992,8 @@ msgstr ""
msgid "" msgid ""
"In order to reduce the visibility of the seam in a closed loop extrusion, " "In order to reduce the visibility of the seam in a closed loop extrusion, "
"the loop is interrupted and shortened by a specified amount.\n" "the loop is interrupted and shortened by a specified amount.\n"
"This amount can be specified in millimeters or as a percentage of the current " "This amount can be specified in millimeters or as a percentage of the "
"extruder diameter. The default value for this parameter is 15%." "current extruder diameter. The default value for this parameter is 15%."
msgstr "" msgstr ""
msgid "Role base wipe speed" msgid "Role base wipe speed"
@ -8987,6 +9043,58 @@ msgid ""
"end > start + step)" "end > start + step)"
msgstr "" msgstr ""
msgid "Start retraction length: "
msgstr ""
msgid "End retraction length: "
msgstr ""
msgid "mm/mm"
msgstr ""
msgid "Physical Printer"
msgstr ""
msgid "Print Host upload"
msgstr ""
msgid "Test"
msgstr ""
msgid "Could not get a valid Printer Host reference"
msgstr ""
msgid "Success!"
msgstr ""
msgid "Refresh Printers"
msgstr ""
msgid ""
"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
"signed certificate."
msgstr ""
msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*"
msgstr ""
msgid "Open CA certificate file"
msgstr ""
#, c-format, boost-format
msgid ""
"On this system, %s uses HTTPS certificates from the system Certificate Store "
"or Keychain."
msgstr ""
msgid ""
"To use a custom CA file, please import your CA file into Certificate Store / "
"Keychain."
msgstr ""
msgid "Connection to printers connected via the print host failed."
msgstr ""
#: resources/data/hints.ini: [hint:3D Scene Operations] #: resources/data/hints.ini: [hint:3D Scene Operations]
msgid "" msgid ""
"3D Scene Operations\n" "3D Scene Operations\n"
@ -9226,6 +9334,9 @@ msgstr ""
"強度の向上\n" "強度の向上\n"
"壁面層数やインフィルの充填密度を増やして造形強度を向上できます。" "壁面層数やインフィルの充填密度を増やして造形強度を向上できます。"
#~ msgid "Bridge direction"
#~ msgstr "ブリッジ方向"
#~ msgid "Keep upper part" #~ msgid "Keep upper part"
#~ msgstr "上の部分を残す" #~ msgstr "上の部分を残す"

View file

@ -130,4 +130,5 @@ src/libslic3r/PrintObject.cpp
src/libslic3r/PrintObjectSlice.cpp src/libslic3r/PrintObjectSlice.cpp
src/libslic3r/PlaceholderParser.cpp src/libslic3r/PlaceholderParser.cpp
src/libslic3r/TreeSupport.cpp src/libslic3r/TreeSupport.cpp
src/slic3r/GUI/calib_dlg.cpp src/slic3r/GUI/calib_dlg.cpp
src/slic3r/GUI/PhysicalPrinterDialog.cpp

View file

@ -2,7 +2,7 @@ msgid ""
msgstr "" msgstr ""
"Project-Id-Version: Orca Slicer\n" "Project-Id-Version: Orca Slicer\n"
"Report-Msgid-Bugs-To: \n" "Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2023-04-29 20:13+0800\n" "POT-Creation-Date: 2023-05-14 11:27+0800\n"
"Language: nl\n" "Language: nl\n"
"MIME-Version: 1.0\n" "MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n" "Content-Type: text/plain; charset=UTF-8\n"
@ -3311,6 +3311,12 @@ msgstr ""
msgid "Pressure advance" msgid "Pressure advance"
msgstr "" msgstr ""
msgid "Retraction test"
msgstr ""
msgid "Orca Tolerance Test"
msgstr ""
msgid "Max flowrate" msgid "Max flowrate"
msgstr "" msgstr ""
@ -5215,9 +5221,6 @@ msgstr ""
msgid "Post-processing Scripts" msgid "Post-processing Scripts"
msgstr "" msgstr ""
msgid "Post-processing scripts"
msgstr ""
msgid "Frequent" msgid "Frequent"
msgstr "Veelgebruikt" msgstr "Veelgebruikt"
@ -5357,6 +5360,12 @@ msgstr "Filament einde G-code"
msgid "Printable space" msgid "Printable space"
msgstr "Ruimte waarbinnen geprint kan worden" msgstr "Ruimte waarbinnen geprint kan worden"
msgid "Cooling Fan"
msgstr ""
msgid "Fan speed-up time"
msgstr ""
msgid "Extruder Clearance" msgid "Extruder Clearance"
msgstr "" msgstr ""
@ -6684,7 +6693,7 @@ msgid ""
"all outer wall no matter how much overhang degree" "all outer wall no matter how much overhang degree"
msgstr "" msgstr ""
msgid "Bridge direction" msgid "Bridge infill direction"
msgstr "" msgstr ""
msgid "" msgid ""
@ -7256,14 +7265,6 @@ msgstr ""
"Dit is de hoek voor een dun opvulpatroon, dat het begin of de hoofdrichting " "Dit is de hoek voor een dun opvulpatroon, dat het begin of de hoofdrichting "
"van de lijnen bepaalt." "van de lijnen bepaalt."
msgid "Bridge infill direction"
msgstr ""
msgid ""
"Angle for bridge infill pattern, which controls the start or main direction "
"of line"
msgstr ""
msgid "Sparse infill density" msgid "Sparse infill density"
msgstr "Vulling percentage" msgstr "Vulling percentage"
@ -7415,6 +7416,14 @@ msgstr ""
msgid "Travel speed of initial layer" msgid "Travel speed of initial layer"
msgstr "" msgstr ""
msgid "Number of slow layers"
msgstr ""
msgid ""
"The first few layers are printed slower than normal. The speed is gradually "
"increased in a linear fashion over the specified number of layers."
msgstr ""
msgid "Initial layer nozzle temperature" msgid "Initial layer nozzle temperature"
msgstr "Nozzle temperatuur voor de eerste laag" msgstr "Nozzle temperatuur voor de eerste laag"
@ -7426,6 +7435,24 @@ msgstr ""
msgid "Full fan speed at layer" msgid "Full fan speed at layer"
msgstr "Volledige snelheid op laag" msgstr "Volledige snelheid op laag"
msgid ""
"Fan speed will be ramped up linearly from zero at layer "
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
"\". \"full_fan_speed_layer\" will be ignored if lower than "
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
msgstr ""
msgid "Support interface fan speed"
msgstr ""
msgid ""
"This fan speed is enforced during all support interfaces, to be able to "
"weaken their bonding with a high fan speed.\n"
"Set to -1 to disable this override.\n"
"Can only be overriden by disable_fan_first_layers."
msgstr ""
msgid "" msgid ""
"Randomly jitter while printing the wall, so that the surface has a rough " "Randomly jitter while printing the wall, so that the surface has a rough "
"look. This setting controls the fuzzy position" "look. This setting controls the fuzzy position"
@ -7549,6 +7576,35 @@ msgid "Enable this option if machine has auxiliary part cooling fan"
msgstr "" msgstr ""
"Schakel deze optie in als de machine een ventilator voor de enclosure heeft" "Schakel deze optie in als de machine een ventilator voor de enclosure heeft"
msgid ""
"Start the fan this number of seconds earlier than its target start time (you "
"can use fractional seconds). It assumes infinite acceleration for this time "
"estimation, and will only take into account G1 and G0 moves (arc fitting is "
"unsupported).\n"
"It won't move fan comands from custom gcodes (they act as a sort of "
"'barrier').\n"
"It won't move fan comands into the start gcode if the 'only custom start "
"gcode' is activated.\n"
"Use 0 to deactivate."
msgstr ""
msgid "Only overhangs"
msgstr ""
msgid "Will only take into account the delay for the cooling of overhangs."
msgstr ""
msgid "Fan kick-start time"
msgstr ""
msgid ""
"Emit a max fan speed command for this amount of seconds before reducing to "
"target speed to kick-start the cooling fan.\n"
"This is useful for fans where a low PWM/power may be insufficient to get the "
"fan started spinning from a stop, or to get the fan up to speed faster.\n"
"Set to 0 to deactivate."
msgstr ""
msgid "G-code flavor" msgid "G-code flavor"
msgstr "G-code type" msgstr "G-code type"
@ -8097,8 +8153,8 @@ msgstr ""
msgid "" msgid ""
"In order to reduce the visibility of the seam in a closed loop extrusion, " "In order to reduce the visibility of the seam in a closed loop extrusion, "
"the loop is interrupted and shortened by a specified amount.\n" "the loop is interrupted and shortened by a specified amount.\n"
"This amount can be specified in millimeters or as a percentage of the current " "This amount can be specified in millimeters or as a percentage of the "
"extruder diameter. The default value for this parameter is 15%." "current extruder diameter. The default value for this parameter is 15%."
msgstr "" msgstr ""
msgid "Role base wipe speed" msgid "Role base wipe speed"
@ -9141,6 +9197,58 @@ msgid ""
"end > start + step)" "end > start + step)"
msgstr "" msgstr ""
msgid "Start retraction length: "
msgstr ""
msgid "End retraction length: "
msgstr ""
msgid "mm/mm"
msgstr ""
msgid "Physical Printer"
msgstr ""
msgid "Print Host upload"
msgstr ""
msgid "Test"
msgstr ""
msgid "Could not get a valid Printer Host reference"
msgstr ""
msgid "Success!"
msgstr ""
msgid "Refresh Printers"
msgstr ""
msgid ""
"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
"signed certificate."
msgstr ""
msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*"
msgstr ""
msgid "Open CA certificate file"
msgstr ""
#, c-format, boost-format
msgid ""
"On this system, %s uses HTTPS certificates from the system Certificate Store "
"or Keychain."
msgstr ""
msgid ""
"To use a custom CA file, please import your CA file into Certificate Store / "
"Keychain."
msgstr ""
msgid "Connection to printers connected via the print host failed."
msgstr ""
#: resources/data/hints.ini: [hint:3D Scene Operations] #: resources/data/hints.ini: [hint:3D Scene Operations]
msgid "" msgid ""
"3D Scene Operations\n" "3D Scene Operations\n"

View file

@ -2,7 +2,7 @@ msgid ""
msgstr "" msgstr ""
"Project-Id-Version: Orca Slicer\n" "Project-Id-Version: Orca Slicer\n"
"Report-Msgid-Bugs-To: \n" "Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2023-04-29 20:13+0800\n" "POT-Creation-Date: 2023-05-14 11:27+0800\n"
"Language: sv\n" "Language: sv\n"
"MIME-Version: 1.0\n" "MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n" "Content-Type: text/plain; charset=UTF-8\n"
@ -3280,6 +3280,12 @@ msgstr ""
msgid "Pressure advance" msgid "Pressure advance"
msgstr "" msgstr ""
msgid "Retraction test"
msgstr ""
msgid "Orca Tolerance Test"
msgstr ""
msgid "Max flowrate" msgid "Max flowrate"
msgstr "" msgstr ""
@ -5148,9 +5154,6 @@ msgstr ""
msgid "Post-processing Scripts" msgid "Post-processing Scripts"
msgstr "" msgstr ""
msgid "Post-processing scripts"
msgstr ""
msgid "Frequent" msgid "Frequent"
msgstr "Återkommande" msgstr "Återkommande"
@ -5287,6 +5290,12 @@ msgstr "Filament stop G-kod"
msgid "Printable space" msgid "Printable space"
msgstr "Utskriftsbar yta" msgstr "Utskriftsbar yta"
msgid "Cooling Fan"
msgstr ""
msgid "Fan speed-up time"
msgstr ""
msgid "Extruder Clearance" msgid "Extruder Clearance"
msgstr "" msgstr ""
@ -6586,7 +6595,7 @@ msgid ""
"all outer wall no matter how much overhang degree" "all outer wall no matter how much overhang degree"
msgstr "" msgstr ""
msgid "Bridge direction" msgid "Bridge infill direction"
msgstr "" msgstr ""
msgid "" msgid ""
@ -7145,14 +7154,6 @@ msgstr ""
"Vinkeln för sparsam ifyllnads mönster, som styr start- eller huvudriktningen " "Vinkeln för sparsam ifyllnads mönster, som styr start- eller huvudriktningen "
"för linjer" "för linjer"
msgid "Bridge infill direction"
msgstr ""
msgid ""
"Angle for bridge infill pattern, which controls the start or main direction "
"of line"
msgstr ""
msgid "Sparse infill density" msgid "Sparse infill density"
msgstr "Sparsam ifyllnads densitet" msgstr "Sparsam ifyllnads densitet"
@ -7302,6 +7303,14 @@ msgstr ""
msgid "Travel speed of initial layer" msgid "Travel speed of initial layer"
msgstr "" msgstr ""
msgid "Number of slow layers"
msgstr ""
msgid ""
"The first few layers are printed slower than normal. The speed is gradually "
"increased in a linear fashion over the specified number of layers."
msgstr ""
msgid "Initial layer nozzle temperature" msgid "Initial layer nozzle temperature"
msgstr "Nozzel temperatur för första lager" msgstr "Nozzel temperatur för första lager"
@ -7311,6 +7320,24 @@ msgstr "Nozzel temperatur för första lager med detta filament"
msgid "Full fan speed at layer" msgid "Full fan speed at layer"
msgstr "Full fläkthastighet vid lager" msgstr "Full fläkthastighet vid lager"
msgid ""
"Fan speed will be ramped up linearly from zero at layer "
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
"\". \"full_fan_speed_layer\" will be ignored if lower than "
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
msgstr ""
msgid "Support interface fan speed"
msgstr ""
msgid ""
"This fan speed is enforced during all support interfaces, to be able to "
"weaken their bonding with a high fan speed.\n"
"Set to -1 to disable this override.\n"
"Can only be overriden by disable_fan_first_layers."
msgstr ""
msgid "" msgid ""
"Randomly jitter while printing the wall, so that the surface has a rough " "Randomly jitter while printing the wall, so that the surface has a rough "
"look. This setting controls the fuzzy position" "look. This setting controls the fuzzy position"
@ -7432,6 +7459,35 @@ msgstr ""
msgid "Enable this option if machine has auxiliary part cooling fan" msgid "Enable this option if machine has auxiliary part cooling fan"
msgstr "Aktivera detta val om maskinen har extra kylfläkt" msgstr "Aktivera detta val om maskinen har extra kylfläkt"
msgid ""
"Start the fan this number of seconds earlier than its target start time (you "
"can use fractional seconds). It assumes infinite acceleration for this time "
"estimation, and will only take into account G1 and G0 moves (arc fitting is "
"unsupported).\n"
"It won't move fan comands from custom gcodes (they act as a sort of "
"'barrier').\n"
"It won't move fan comands into the start gcode if the 'only custom start "
"gcode' is activated.\n"
"Use 0 to deactivate."
msgstr ""
msgid "Only overhangs"
msgstr ""
msgid "Will only take into account the delay for the cooling of overhangs."
msgstr ""
msgid "Fan kick-start time"
msgstr ""
msgid ""
"Emit a max fan speed command for this amount of seconds before reducing to "
"target speed to kick-start the cooling fan.\n"
"This is useful for fans where a low PWM/power may be insufficient to get the "
"fan started spinning from a stop, or to get the fan up to speed faster.\n"
"Set to 0 to deactivate."
msgstr ""
msgid "G-code flavor" msgid "G-code flavor"
msgstr "G-kod smak" msgstr "G-kod smak"
@ -7970,8 +8026,8 @@ msgstr ""
msgid "" msgid ""
"In order to reduce the visibility of the seam in a closed loop extrusion, " "In order to reduce the visibility of the seam in a closed loop extrusion, "
"the loop is interrupted and shortened by a specified amount.\n" "the loop is interrupted and shortened by a specified amount.\n"
"This amount can be specified in millimeters or as a percentage of the current " "This amount can be specified in millimeters or as a percentage of the "
"extruder diameter. The default value for this parameter is 15%." "current extruder diameter. The default value for this parameter is 15%."
msgstr "" msgstr ""
msgid "Role base wipe speed" msgid "Role base wipe speed"
@ -8998,6 +9054,58 @@ msgid ""
"end > start + step)" "end > start + step)"
msgstr "" msgstr ""
msgid "Start retraction length: "
msgstr ""
msgid "End retraction length: "
msgstr ""
msgid "mm/mm"
msgstr ""
msgid "Physical Printer"
msgstr ""
msgid "Print Host upload"
msgstr ""
msgid "Test"
msgstr ""
msgid "Could not get a valid Printer Host reference"
msgstr ""
msgid "Success!"
msgstr ""
msgid "Refresh Printers"
msgstr ""
msgid ""
"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
"signed certificate."
msgstr ""
msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*"
msgstr ""
msgid "Open CA certificate file"
msgstr ""
#, c-format, boost-format
msgid ""
"On this system, %s uses HTTPS certificates from the system Certificate Store "
"or Keychain."
msgstr ""
msgid ""
"To use a custom CA file, please import your CA file into Certificate Store / "
"Keychain."
msgstr ""
msgid "Connection to printers connected via the print host failed."
msgstr ""
#: resources/data/hints.ini: [hint:3D Scene Operations] #: resources/data/hints.ini: [hint:3D Scene Operations]
msgid "" msgid ""
"3D Scene Operations\n" "3D Scene Operations\n"

View file

@ -6,7 +6,7 @@ msgid ""
msgstr "" msgstr ""
"Project-Id-Version: Slic3rPE\n" "Project-Id-Version: Slic3rPE\n"
"Report-Msgid-Bugs-To: \n" "Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2023-04-29 20:13+0800\n" "POT-Creation-Date: 2023-05-14 11:27+0800\n"
"PO-Revision-Date: 2023-04-01 13:21+0800\n" "PO-Revision-Date: 2023-04-01 13:21+0800\n"
"Last-Translator: Jiang Yue <maze1024@gmail.com>\n" "Last-Translator: Jiang Yue <maze1024@gmail.com>\n"
"Language-Team: \n" "Language-Team: \n"
@ -812,16 +812,16 @@ msgid "Load..."
msgstr "加载..." msgstr "加载..."
msgid "Orca Cube" msgid "Orca Cube"
msgstr "" msgstr "Orca方块"
msgid "3DBenchy" msgid "3DBenchy"
msgstr "" msgstr "小船"
msgid "Autodesk FDM Test" msgid "Autodesk FDM Test"
msgstr "" msgstr "欧特克FDM测试"
msgid "Voron Cube" msgid "Voron Cube"
msgstr "" msgstr "Voron方块"
msgid "Cube" msgid "Cube"
msgstr "立方体" msgstr "立方体"
@ -3239,6 +3239,12 @@ msgstr "流量"
msgid "Pressure advance" msgid "Pressure advance"
msgstr "压力提前" msgstr "压力提前"
msgid "Retraction test"
msgstr "回抽测试"
msgid "Orca Tolerance Test"
msgstr "Orca误差测试"
msgid "Max flowrate" msgid "Max flowrate"
msgstr "最大体积流量" msgstr "最大体积流量"
@ -5119,9 +5125,6 @@ msgstr "G-code 输出"
msgid "Post-processing Scripts" msgid "Post-processing Scripts"
msgstr "后处理脚本" msgstr "后处理脚本"
msgid "Post-processing scripts"
msgstr ""
msgid "Frequent" msgid "Frequent"
msgstr "常用" msgstr "常用"
@ -5241,6 +5244,12 @@ msgstr "耗材丝结束G-code"
msgid "Printable space" msgid "Printable space"
msgstr "可打印区域" msgstr "可打印区域"
msgid "Cooling Fan"
msgstr "冷却风扇"
msgid "Fan speed-up time"
msgstr "风扇响应时间"
msgid "Extruder Clearance" msgid "Extruder Clearance"
msgstr "挤出机避让空间" msgstr "挤出机避让空间"
@ -6499,8 +6508,8 @@ msgstr ""
"有下层支撑的线的宽度是多少。0%%意味着无论悬垂程度如何,都要对所有外壁强制冷" "有下层支撑的线的宽度是多少。0%%意味着无论悬垂程度如何,都要对所有外壁强制冷"
"却。" "却。"
msgid "Bridge direction" msgid "Bridge infill direction"
msgstr "桥接方向" msgstr "拉桥填充方向"
msgid "" msgid ""
"Bridging angle override. If left to zero, the bridging angle will be " "Bridging angle override. If left to zero, the bridging angle will be "
@ -7039,14 +7048,6 @@ msgid ""
"of line" "of line"
msgstr "稀疏填充图案的角度,决定走线的开始或整体方向。" msgstr "稀疏填充图案的角度,决定走线的开始或整体方向。"
msgid "Bridge infill direction"
msgstr "拉桥填充方向"
msgid ""
"Angle for bridge infill pattern, which controls the start or main direction "
"of line"
msgstr ""
msgid "Sparse infill density" msgid "Sparse infill density"
msgstr "稀疏填充密度" msgstr "稀疏填充密度"
@ -7188,6 +7189,14 @@ msgstr "首层空驶速度"
msgid "Travel speed of initial layer" msgid "Travel speed of initial layer"
msgstr "首层空驶速度" msgstr "首层空驶速度"
msgid "Number of slow layers"
msgstr "慢速打印层数"
msgid ""
"The first few layers are printed slower than normal. The speed is gradually "
"increased in a linear fashion over the specified number of layers."
msgstr "减慢前几层的打印速度。打印速度会逐渐加速到满速"
msgid "Initial layer nozzle temperature" msgid "Initial layer nozzle temperature"
msgstr "首层打印温度" msgstr "首层打印温度"
@ -7197,6 +7206,27 @@ msgstr "打印首层时的喷嘴温度"
msgid "Full fan speed at layer" msgid "Full fan speed at layer"
msgstr "满速风扇在" msgstr "满速风扇在"
msgid ""
"Fan speed will be ramped up linearly from zero at layer "
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
"\". \"full_fan_speed_layer\" will be ignored if lower than "
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
msgstr ""
"风扇速度将从“禁用第一层”的零线性上升到“全风扇速度层”的最大。如果低于“禁用风扇"
"第一层”,则“全风扇速度第一层”将被忽略,在这种情况下,风扇将在“禁用风扇第一"
"层”+1层以最大允许速度运行。"
msgid "Support interface fan speed"
msgstr "支撐接触面风扇"
msgid ""
"This fan speed is enforced during all support interfaces, to be able to "
"weaken their bonding with a high fan speed.\n"
"Set to -1 to disable this override.\n"
"Can only be overriden by disable_fan_first_layers."
msgstr "此风扇速度在所有支撑接触层打印期间强制执行"
msgid "" msgid ""
"Randomly jitter while printing the wall, so that the surface has a rough " "Randomly jitter while printing the wall, so that the surface has a rough "
"look. This setting controls the fuzzy position" "look. This setting controls the fuzzy position"
@ -7303,6 +7333,39 @@ msgstr "洛氏硬度"
msgid "Enable this option if machine has auxiliary part cooling fan" msgid "Enable this option if machine has auxiliary part cooling fan"
msgstr "如果机器有辅助部件冷却风扇,勾选该选项" msgstr "如果机器有辅助部件冷却风扇,勾选该选项"
msgid ""
"Start the fan this number of seconds earlier than its target start time (you "
"can use fractional seconds). It assumes infinite acceleration for this time "
"estimation, and will only take into account G1 and G0 moves (arc fitting is "
"unsupported).\n"
"It won't move fan comands from custom gcodes (they act as a sort of "
"'barrier').\n"
"It won't move fan comands into the start gcode if the 'only custom start "
"gcode' is activated.\n"
"Use 0 to deactivate."
msgstr ""
"把风扇启动指令往前移动指定时间以补偿风扇的启动时间。目前支支持G1 G0指令\n"
"设为0以禁用此选项"
msgid "Only overhangs"
msgstr "仅悬垂"
msgid "Will only take into account the delay for the cooling of overhangs."
msgstr "仅对悬垂有效"
msgid "Fan kick-start time"
msgstr "风扇"
msgid ""
"Emit a max fan speed command for this amount of seconds before reducing to "
"target speed to kick-start the cooling fan.\n"
"This is useful for fans where a low PWM/power may be insufficient to get the "
"fan started spinning from a stop, or to get the fan up to speed faster.\n"
"Set to 0 to deactivate."
msgstr ""
"让风扇满速运行指定时间以帮助风扇顺利启动\n"
"设为0禁用此选项"
msgid "G-code flavor" msgid "G-code flavor"
msgstr "G-code风格" msgstr "G-code风格"
@ -7812,8 +7875,8 @@ msgstr "接缝留空"
msgid "" msgid ""
"In order to reduce the visibility of the seam in a closed loop extrusion, " "In order to reduce the visibility of the seam in a closed loop extrusion, "
"the loop is interrupted and shortened by a specified amount.\n" "the loop is interrupted and shortened by a specified amount.\n"
"This amount can be specified in millimeters or as a percentage of the current " "This amount can be specified in millimeters or as a percentage of the "
"extruder diameter. The default value for this parameter is 15%." "current extruder diameter. The default value for this parameter is 15%."
msgstr "" msgstr ""
msgid "Role base wipe speed" msgid "Role base wipe speed"
@ -8019,7 +8082,7 @@ msgid "The z gap between the bottom support interface and object"
msgstr "支撑生成于模型表面时支撑面底部和模型之间的z间隙" msgstr "支撑生成于模型表面时支撑面底部和模型之间的z间隙"
msgid "Support/raft base" msgid "Support/raft base"
msgstr "" msgstr "支撑/筏层主体"
msgid "" msgid ""
"Filament to print support base and raft. \"Default\" means no specific " "Filament to print support base and raft. \"Default\" means no specific "
@ -8038,7 +8101,7 @@ msgid ""
msgstr "使用圈形走线覆盖顶部接触面。默认关闭。" msgstr "使用圈形走线覆盖顶部接触面。默认关闭。"
msgid "Support/raft interface" msgid "Support/raft interface"
msgstr "" msgstr "支撑/筏层界面"
msgid "" msgid ""
"Filament to print support interface. \"Default\" means no specific filament " "Filament to print support interface. \"Default\" means no specific filament "
@ -8719,21 +8782,6 @@ msgstr "支撑:正在生成多边形"
msgid "Support: generate toolpath" msgid "Support: generate toolpath"
msgstr "支撑:正在生成走线路径" msgstr "支撑:正在生成走线路径"
msgid "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension."
msgstr "未知的文件格式。输入文件的扩展名必须为.stl、.obj 或 .amf.xml。"
msgid "Loading of a model file failed."
msgstr "加载模型文件失败。"
msgid "The supplied file couldn't be read because it's empty"
msgstr "无法读取提供的文件,因为该文件为空。"
msgid "Unknown file format. Input file must have .3mf or .zip.amf extension."
msgstr "未知的文件格式。输入文件的扩展名必须为.3mf或.zip .amf。"
msgid "Canceled"
msgstr "已取消"
#, c-format, boost-format #, c-format, boost-format
msgid "Support: generate polygons at layer %d" msgid "Support: generate polygons at layer %d"
msgstr "支撑:正在生成层%d的多边形" msgstr "支撑:正在生成层%d的多边形"
@ -8836,7 +8884,7 @@ msgid "End volumetric speed: "
msgstr "结束流量" msgstr "结束流量"
msgid "step: " msgid "step: "
msgstr "流量步距" msgstr "步距"
msgid "" msgid ""
"Please input valid values:\n" "Please input valid values:\n"
@ -8859,6 +8907,58 @@ msgid ""
"end > start + step)" "end > start + step)"
msgstr "" msgstr ""
msgid "Start retraction length: "
msgstr "起始回抽长度"
msgid "End retraction length: "
msgstr "结束回抽长度"
msgid "mm/mm"
msgstr ""
msgid "Physical Printer"
msgstr "物理打印机"
msgid "Print Host upload"
msgstr ""
msgid "Test"
msgstr ""
msgid "Could not get a valid Printer Host reference"
msgstr ""
msgid "Success!"
msgstr ""
msgid "Refresh Printers"
msgstr ""
msgid ""
"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
"signed certificate."
msgstr ""
msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*"
msgstr ""
msgid "Open CA certificate file"
msgstr ""
#, c-format, boost-format
msgid ""
"On this system, %s uses HTTPS certificates from the system Certificate Store "
"or Keychain."
msgstr ""
msgid ""
"To use a custom CA file, please import your CA file into Certificate Store / "
"Keychain."
msgstr ""
msgid "Connection to printers connected via the print host failed."
msgstr ""
#: resources/data/hints.ini: [hint:3D Scene Operations] #: resources/data/hints.ini: [hint:3D Scene Operations]
msgid "" msgid ""
"3D Scene Operations\n" "3D Scene Operations\n"
@ -9104,8 +9204,26 @@ msgstr ""
"提高强度\n" "提高强度\n"
"你知道吗?你可以使用更多的墙层数和更高的疏散填充密度来提高模型的强度。" "你知道吗?你可以使用更多的墙层数和更高的疏散填充密度来提高模型的强度。"
#~ msgid "Physical Printer" #~ msgid "Bridge direction"
#~ msgstr "物理打印机" #~ msgstr "桥接方向"
#~ msgid ""
#~ "Unknown file format. Input file must have .stl, .obj, .amf(.xml) "
#~ "extension."
#~ msgstr "未知的文件格式。输入文件的扩展名必须为.stl、.obj 或 .amf.xml。"
#~ msgid "Loading of a model file failed."
#~ msgstr "加载模型文件失败。"
#~ msgid "The supplied file couldn't be read because it's empty"
#~ msgstr "无法读取提供的文件,因为该文件为空。"
#~ msgid ""
#~ "Unknown file format. Input file must have .3mf or .zip.amf extension."
#~ msgstr "未知的文件格式。输入文件的扩展名必须为.3mf或.zip .amf。"
#~ msgid "Canceled"
#~ msgstr "已取消"
#~ msgid "Keep upper part" #~ msgid "Keep upper part"
#~ msgstr "保留上半部分" #~ msgstr "保留上半部分"

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

View file

@ -490,13 +490,13 @@ wxMenu* MenuFactory::append_submenu_add_generic(wxMenu* menu, ModelVolumeType ty
[type, item](wxCommandEvent &) { [type, item](wxCommandEvent &) {
std::vector<boost::filesystem::path> input_files; std::vector<boost::filesystem::path> input_files;
std::string file_name = item; std::string file_name = item;
if (file_name == "Orca Cube") if (file_name == L("Orca Cube"))
file_name = "OrcaCube_v2.3mf"; file_name = "OrcaCube_v2.3mf";
else if (file_name == "3DBenchy") else if (file_name == L("3DBenchy"))
file_name = "3DBenchy.stl"; file_name = "3DBenchy.stl";
else if (file_name == "Autodesk FDM Test") else if (file_name == L("Autodesk FDM Test"))
file_name = "ksr_fdmtest_v4.stl"; file_name = "ksr_fdmtest_v4.stl";
else if (file_name == "Voron Cube") else if (file_name == L("Voron Cube"))
file_name = "Voron_Design_Cube_v7.stl"; file_name = "Voron_Design_Cube_v7.stl";
else else
return; return;

View file

@ -2714,6 +2714,14 @@ void MainFrame::init_menubar_as_editor()
}, "", nullptr, }, "", nullptr,
[this]() {return m_plater->is_view3D_shown();; }, this); [this]() {return m_plater->is_view3D_shown();; }, this);
// Tolerance Test
append_menu_item(calib_menu, wxID_ANY, _L("Orca Tolerance Test"), _L("Orca Tolerance Test"),
[this](wxCommandEvent&) {
m_plater->new_project();
m_plater->add_model(false, Slic3r::resources_dir() + "/calib/tolerance_test/OrcaToleranceTest.stl");
}, "", nullptr,
[this]() {return m_plater->is_view3D_shown();; }, this);
// Advance calibrations // Advance calibrations
auto advance_menu = new wxMenu(); auto advance_menu = new wxMenu();
append_menu_item( append_menu_item(
@ -2731,16 +2739,8 @@ void MainFrame::init_menubar_as_editor()
m_vfa_test_dlg = new VFA_Test_Dlg((wxWindow*)this, wxID_ANY, m_plater); m_vfa_test_dlg = new VFA_Test_Dlg((wxWindow*)this, wxID_ANY, m_plater);
m_vfa_test_dlg->ShowModal(); m_vfa_test_dlg->ShowModal();
}, "", nullptr, }, "", nullptr,
[this]() {return m_plater->is_view3D_shown();; }, this); [this]() {return m_plater->is_view3D_shown();; }, this);
append_menu_item(
advance_menu, wxID_ANY, _L("Orca Tolerance Test"), _L("Orca Tolerance Test"),
[this](wxCommandEvent&) {
m_plater->new_project();
m_plater->add_model(false, Slic3r::resources_dir() + "/calib/tolerance_test/OrcaToleranceTest.stl");
}, "", nullptr,
[this]() {return m_plater->is_view3D_shown();; }, this);
append_submenu(calib_menu, advance_menu, wxID_ANY, _L("More..."), _L("More calibrations"), "", append_submenu(calib_menu, advance_menu, wxID_ANY, _L("More..."), _L("More calibrations"), "",
[this]() {return m_plater->is_view3D_shown();; }); [this]() {return m_plater->is_view3D_shown();; });
// help // help