update loacale

localization/i18n/ko/OrcaSlicer_ko.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-09-30 10:27+0800\n"
+"POT-Creation-Date: 2023-10-11 22:28+0800\n"
 "PO-Revision-Date: 2023-10-09 12:04+0900\n"
 "Last-Translator: Hotsolidinfill, crwusiz <crwusiz@naver.com>\n"
 "Language-Team: \n"
@@ -1199,8 +1199,8 @@ msgstr ""
 "이 조치는 잘라내기 연결을 끊습니다.\n"
 "그 이후에는 모델 일관성을 보장할 수 없습니다.\n"
 "\n"
-"꽉찬 부품 또는 비우기 부피로 조작하려면 먼저 잘라내기 정보를 무효화해야 합"
-"니다."
+"꽉찬 부품 또는 비우기 부피로 조작하려면 먼저 잘라내기 정보를 무효화해야 합니"
+"다."
 
 msgid "Delete all connectors"
 msgstr "모든 커넥터 삭제"
@@ -4339,6 +4339,24 @@ msgstr "필라멘트 설정"
 msgid "Printer settings"
 msgstr "프린터 설정"
 
+msgid "Remove current plate (if not last one)"
+msgstr ""
+
+msgid "Auto orient objects on current plate"
+msgstr ""
+
+msgid "Arrange objects on current plate"
+msgstr ""
+
+msgid "Unlock current plate"
+msgstr ""
+
+msgid "Lock current plate"
+msgstr ""
+
+msgid "Customize current plate"
+msgstr ""
+
 msgid "Untitled"
 msgstr "제목 없음"
 
@@ -5721,8 +5739,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add "
-"Primitive\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add Primitive"
+"\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "툴헤드 없이 시간 경과를 기록할 경우 \"타임랩스 닦기 타워\"를 추가하는 것이 좋"
 "습니다\n"
@@ -7169,6 +7187,19 @@ msgstr ""
 "코끼리 발 효과(Elephant foot effect)를 보정하기 위해 빌드 플레이트의 초기 레"
 "이어를 축소합니다"
 
+msgid "Elephant foot compensation layers"
+msgstr ""
+
+msgid ""
+"The number of layers on which the elephant foot compensation will be active. "
+"The first layer will be shrunk by the elephant foot compensation value, then "
+"the next layers will be linearly shrunk less, up to the layer indicated by "
+"this value."
+msgstr ""
+
+msgid "layers"
+msgstr "레이어"
+
 msgid ""
 "Slicing height for each layer. Smaller layer height means more accurate and "
 "more printing time"
@@ -7721,9 +7752,6 @@ msgstr ""
 "빌드 플레이트의 접착력 향상을 위해 첫 레이어부터 특정 레이어까지의 모든 냉각 "
 "팬을 정지합니다"
 
-msgid "layers"
-msgstr "레이어"
-
 msgid "Don't support bridges"
 msgstr "다리 지지대 미생성"
 
@@ -8464,10 +8492,10 @@ msgstr "팬 최대 속도 레이어"
 
 msgid ""
 "Fan speed will be ramped up linearly from zero at layer "
-"\"close_fan_the_first_x_layers\" to maximum at layer "
-"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
-"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
-"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
+"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
+"\". \"full_fan_speed_layer\" will be ignored if lower than "
+"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
+"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
 msgstr ""
 "팬 속도는 \"close_fan_the_first_x_layers\" 의 0에서 \"full_fan_speed_layer\" "
 "의 최고 속도까지 선형적으로 증가합니다. \"full_fan_speed_layer\"가 "
@@ -8805,6 +8833,9 @@ msgstr "모든 꽉찬 레이어"
 msgid "Ironing Pattern"
 msgstr "다림질 패턴"
 
+msgid "The pattern that will be used when ironing"
+msgstr ""
+
 msgid "Ironing flow"
 msgstr "다림질 유량"
 
@@ -8827,6 +8858,14 @@ msgstr "다림질 속도"
 msgid "Print speed of ironing lines"
 msgstr "다림질 선의 출력 속도"
 
+msgid "Ironing angle"
+msgstr ""
+
+msgid ""
+"The angle ironing is done at. A negative number disables this function and "
+"uses the default method."
+msgstr ""
+
 msgid "This gcode part is inserted at every layer change after lift z"
 msgstr "이 G코드는 Z올리기 이후 모든 레이어 변경에 삽입됩니다"
 
@@ -10280,6 +10319,34 @@ msgstr ""
 "곽선을 더 크게 만듭니다. 음수 값은 윤곽선을 더 작게 만듭니다. 이 기능은 개체"
 "의 조립 문제가 있을 때 크기를 약간 조정하는 데 사용됩니다"
 
+msgid "Convert holes to polyholes"
+msgstr ""
+
+msgid ""
+"Search for almost-circular holes that span more than one layer and convert "
+"the geometry to polyholes. Use the nozzle size and the (biggest) diameter to "
+"compute the polyhole.\n"
+"See http://hydraraptor.blogspot.com/2011/02/polyholes.html"
+msgstr ""
+
+msgid "Polyhole detection margin"
+msgstr ""
+
+#, c-format, boost-format
+msgid ""
+"Maximum defection of a point to the estimated radius of the circle.\n"
+"As cylinders are often exported as triangles of varying size, points may not "
+"be on the circle circumference. This setting allows you some leway to "
+"broaden the detection.\n"
+"In mm or in % of the radius."
+msgstr ""
+
+msgid "Polyhole twist"
+msgstr ""
+
+msgid "Rotate the polyhole every layer."
+msgstr ""
+
 msgid "G-code thumbnails"
 msgstr "G코드 미리보기(썸네일)"