Wiki Update part 4 (#9872)

* How to wiki

* Local images + pressure-advance realocation

* fill patterns WIP

+ Patch Until they fix this: https://github.com/orgs/community/discussions/118296

* Wiki images update 8fff1ca

Updated images with new style from commit 8fff1ca (pr: #9797)

* Internal Wiki Links + standardization

* Update Flow Calibration image

Co-Authored-By: Dowsha3d <216038220+dowsha3d@users.noreply.github.com>

* Seam wiki merge

* Updated Wiki Home

* MD Final lines

* How to index

---------

Co-authored-by: Dowsha3d <216038220+dowsha3d@users.noreply.github.com>

doc/print_settings/quality/quality_settings_line_width.md

@@ -2,21 +2,21 @@
 
 These settings control how wide the extruded lines are.
 
-- **Default**: The default line width in mm or as a percentage of the nozzle size.
+- **Default:** The default line width in mm or as a percentage of the nozzle size.
 
-- **First Layer**: The line width of the first layer. Typically, this is wider than the rest of the print, to promote better bed adhesion. See tips below for why.
+- **First Layer:** The line width of the first layer. Typically, this is wider than the rest of the print, to promote better bed adhesion. See tips below for why.
 
-- **Outer Wall**: The line width in mm or as a percentage of the nozzle size used when printing the model’s external wall perimeters.
+- **Outer Wall:** The line width in mm or as a percentage of the nozzle size used when printing the model’s external wall perimeters.
 
-- **Inner Wall**: The line width in mm or as a percentage of the nozzle size used when printing the model’s internal wall perimeters.
+- **Inner Wall:** The line width in mm or as a percentage of the nozzle size used when printing the model’s internal wall perimeters.
 
-- **Top Surface**: The line width in mm or as a percentage of the nozzle size used when printing the model’s top surface.
+- **Top Surface:** The line width in mm or as a percentage of the nozzle size used when printing the model’s top surface.
 
-- **Sparse Infill**: The line width in mm or as a percentage of the nozzle size used when printing the model’s sparse infill.
+- **Sparse Infill:** The line width in mm or as a percentage of the nozzle size used when printing the model’s sparse infill.
 
-- **Internal Solid Infill**: The line width in mm or as a percentage of the nozzle size used when printing the model’s internal solid infill.
+- **Internal Solid Infill:** The line width in mm or as a percentage of the nozzle size used when printing the model’s internal solid infill.
 
-- **Support**: The line width in mm or as a percentage of the nozzle size used when printing the model’s support structures.
+- **Support:** The line width in mm or as a percentage of the nozzle size used when printing the model’s support structures.
 
 ## Tips:
 
@@ -40,4 +40,4 @@ These settings control how wide the extruded lines are.
 
 10. **For supports, using 100% or less line width will make the supports weaker** by reducing their layer adhesion, making them easier to remove.
 
-11. **If your printer is limited mechanically, try to maintain the material flow as consistent as possible between critical features of your model**, to ease the load on the extruder having to adapt its flow between them. This is especially useful for printers that do not use pressure advance/linear advance and if your extruder is not as capable mechanically. You can do that by adjusting the line widths and speeds to reduce the variation between critical features (e.g., external and internal wall flow). For example, print them at the same speed and the same line width, or print the external perimeter slightly wider and slightly slower than the internal perimeter. Material flow can be visualized in the sliced model – flow drop down.
+11. **If your printer is limited mechanically, try to maintain the material flow as consistent as possible between critical features of your model**, to ease the load on the extruder having to adapt its flow between them. This is especially useful for printers that do not use pressure advance/linear advance and if your extruder is not as capable mechanically. You can do that by adjusting the line widths and speeds to reduce the variation between critical features (e.g., external and internal wall flow). For example, print them at the same speed and the same line width, or print the external perimeter slightly wider and slightly slower than the internal perimeter. Material flow can be visualized in the sliced model – flow drop down.