mirror of
https://github.com/SoftFever/OrcaSlicer.git
synced 2025-07-06 22:47:32 -06:00
update locale
This commit is contained in:
SoftFever
parent
27eb7bbe9f
commit
1fa6ee78e7
19 changed files with 274 additions and 133 deletions
|
|
@ -8,7 +8,7 @@ msgid ""
|
|||
msgstr ""
|
||||
"Project-Id-Version: PACKAGE VERSION\n"
|
||||
"Report-Msgid-Bugs-To: \n"
|
||||
"POT-Creation-Date: 2023-08-14 19:56+0800\n"
|
||||
"POT-Creation-Date: 2023-08-19 22:08+0800\n"
|
||||
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
|
||||
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
|
||||
"Language-Team: LANGUAGE <LL@li.org>\n"
|
||||
|
|
@ -4610,6 +4610,12 @@ msgstr ""
|
|||
msgid "Plate name"
|
||||
msgstr ""
|
||||
|
||||
msgid "Customize"
|
||||
msgstr ""
|
||||
|
||||
msgid "First Layer print sequence"
|
||||
msgstr ""
|
||||
|
||||
msgid "Same as Global Bed Type"
|
||||
msgstr ""
|
||||
|
||||
|
|
@ -4992,8 +4998,8 @@ msgstr ""
|
|||
msgid ""
|
||||
"When recording timelapse without toolhead, it is recommended to add a "
|
||||
"\"Timelapse Wipe Tower\" \n"
|
||||
"by right-click the empty position of build plate and choose \"Add "
|
||||
"Primitive\"->\"Timelapse Wipe Tower\"."
|
||||
"by right-click the empty position of build plate and choose \"Add Primitive"
|
||||
"\"->\"Timelapse Wipe Tower\"."
|
||||
msgstr ""
|
||||
|
||||
msgid "Line width"
|
||||
|
|
@ -6363,6 +6369,9 @@ msgstr ""
|
|||
msgid "Bed types supported by the printer"
|
||||
msgstr ""
|
||||
|
||||
msgid "First layer print sequence"
|
||||
msgstr ""
|
||||
|
||||
msgid "This G-code is inserted at every layer change before lifting z"
|
||||
msgstr ""
|
||||
|
||||
|
|
@ -7198,10 +7207,10 @@ msgstr ""
|
|||
|
||||
msgid ""
|
||||
"Fan speed will be ramped up linearly from zero at layer "
|
||||
"\"close_fan_the_first_x_layers\" to maximum at layer "
|
||||
"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
|
||||
"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
|
||||
"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
|
||||
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
|
||||
"\". \"full_fan_speed_layer\" will be ignored if lower than "
|
||||
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
|
||||
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
|
||||
msgstr ""
|
||||
|
||||
msgid "Support interface fan speed"
|
||||
|
|
|
|||
|
|
@ -7,7 +7,7 @@ msgid ""
|
|||
msgstr ""
|
||||
"Project-Id-Version: \n"
|
||||
"Report-Msgid-Bugs-To: \n"
|
||||
"POT-Creation-Date: 2023-08-14 19:56+0800\n"
|
||||
"POT-Creation-Date: 2023-08-19 22:08+0800\n"
|
||||
"PO-Revision-Date: 2023-07-17 21:51+0200\n"
|
||||
"Last-Translator: Momo <renemosner@seznam.cz>\n"
|
||||
"Language-Team: \n"
|
||||
|
|
@ -4895,6 +4895,12 @@ msgstr "Tisková sekvence"
|
|||
msgid "Plate name"
|
||||
msgstr "Název Podložky"
|
||||
|
||||
msgid "Customize"
|
||||
msgstr ""
|
||||
|
||||
msgid "First Layer print sequence"
|
||||
msgstr ""
|
||||
|
||||
msgid "Same as Global Bed Type"
|
||||
msgstr "Stejné jako globální typ Podložky"
|
||||
|
||||
|
|
@ -5317,8 +5323,8 @@ msgstr ""
|
|||
msgid ""
|
||||
"When recording timelapse without toolhead, it is recommended to add a "
|
||||
"\"Timelapse Wipe Tower\" \n"
|
||||
"by right-click the empty position of build plate and choose \"Add "
|
||||
"Primitive\"->\"Timelapse Wipe Tower\"."
|
||||
"by right-click the empty position of build plate and choose \"Add Primitive"
|
||||
"\"->\"Timelapse Wipe Tower\"."
|
||||
msgstr ""
|
||||
"Při nahrávání časosběru bez nástrojové hlavy se doporučuje přidat "
|
||||
"\"Timelapse Wipe Tower\" \n"
|
||||
|
|
@ -6823,6 +6829,9 @@ msgstr ""
|
|||
msgid "Bed types supported by the printer"
|
||||
msgstr "Typy podložek podporované tiskárnou"
|
||||
|
||||
msgid "First layer print sequence"
|
||||
msgstr ""
|
||||
|
||||
msgid "This G-code is inserted at every layer change before lifting z"
|
||||
msgstr "Tento G-kód se vkládá při každé změně vrstvy před zvednutím z"
|
||||
|
||||
|
|
@ -7804,10 +7813,10 @@ msgstr "Maximální otáčky ventilátoru ve vrstvě"
|
|||
|
||||
msgid ""
|
||||
"Fan speed will be ramped up linearly from zero at layer "
|
||||
"\"close_fan_the_first_x_layers\" to maximum at layer "
|
||||
"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
|
||||
"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
|
||||
"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
|
||||
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
|
||||
"\". \"full_fan_speed_layer\" will be ignored if lower than "
|
||||
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
|
||||
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
|
||||
msgstr ""
|
||||
"Otáčky ventilátoru se lineárně zvýší z nuly ve vrstvě "
|
||||
"\"close_fan_first_layers\" na maximum ve vrstvě \"full_fan_speed_layer\". "
|
||||
|
|
@ -10125,8 +10134,8 @@ msgid ""
|
|||
msgstr ""
|
||||
"Plochou na podložku\n"
|
||||
"Věděli jste, že můžete rychle nastavit orientaci modelu tak, aby jedna z "
|
||||
"jeho stěn spočívala na tiskovém podloží? Vyberte funkci \"Plochou na "
|
||||
"podložku\" nebo stiskněte klávesu <b>F</b>."
|
||||
"jeho stěn spočívala na tiskovém podloží? Vyberte funkci \"Plochou na podložku"
|
||||
"\" nebo stiskněte klávesu <b>F</b>."
|
||||
|
||||
#: resources/data/hints.ini: [hint:Object List]
|
||||
msgid ""
|
||||
|
|
|
|||
|
|
@ -2,7 +2,7 @@ msgid ""
|
|||
msgstr ""
|
||||
"Project-Id-Version: Orca Slicer\n"
|
||||
"Report-Msgid-Bugs-To: \n"
|
||||
"POT-Creation-Date: 2023-08-18 09:11+0200\n"
|
||||
"POT-Creation-Date: 2023-08-19 22:08+0800\n"
|
||||
"PO-Revision-Date: \n"
|
||||
"Last-Translator: Heiko Liebscher <hliebschergmail.com>\n"
|
||||
"Language-Team: \n"
|
||||
|
|
@ -4658,7 +4658,7 @@ msgstr "Anzahl der aktuell ausgewählten Teile: %1%\n"
|
|||
|
||||
#, boost-format
|
||||
msgid "Number of currently selected objects: %1%\n"
|
||||
msgstr "Anzahl der aktuell ausgewählten Objekte: %1%"
|
||||
msgstr "Anzahl der aktuell ausgewählten Objekte: %1%\n"
|
||||
|
||||
#, boost-format
|
||||
msgid "Part name: %1%\n"
|
||||
|
|
@ -5005,6 +5005,12 @@ msgstr "Druckreihenfolge"
|
|||
msgid "Plate name"
|
||||
msgstr "Platten-Name"
|
||||
|
||||
msgid "Customize"
|
||||
msgstr ""
|
||||
|
||||
msgid "First Layer print sequence"
|
||||
msgstr ""
|
||||
|
||||
msgid "Same as Global Bed Type"
|
||||
msgstr "Entspricht dem allgemeinen Bettyp"
|
||||
|
||||
|
|
@ -5458,13 +5464,13 @@ msgstr ""
|
|||
msgid ""
|
||||
"When recording timelapse without toolhead, it is recommended to add a "
|
||||
"\"Timelapse Wipe Tower\" \n"
|
||||
"by right-click the empty position of build plate and choose \"Add "
|
||||
"Primitive\"->\"Timelapse Wipe Tower\"."
|
||||
"by right-click the empty position of build plate and choose \"Add Primitive"
|
||||
"\"->\"Timelapse Wipe Tower\"."
|
||||
msgstr ""
|
||||
"Wenn Sie einen Zeitraffer ohne Werkzeugkopf aufnehmen, wird empfohlen, einen "
|
||||
"\"Timelapse Wischturm\" hinzuzufügen, indem Sie mit der rechten Maustaste "
|
||||
"auf die leere Position der Bauplatte klicken und \"Primitiv hinzufügen\"-"
|
||||
">\"Timelapse Wischturm\" wählen."
|
||||
"auf die leere Position der Bauplatte klicken und \"Primitiv hinzufügen\"->"
|
||||
"\"Timelapse Wischturm\" wählen."
|
||||
|
||||
msgid "Line width"
|
||||
msgstr "Breite der Linie"
|
||||
|
|
@ -7016,6 +7022,9 @@ msgstr ""
|
|||
msgid "Bed types supported by the printer"
|
||||
msgstr "Vom Drucker unterstützte Druckbettypen"
|
||||
|
||||
msgid "First layer print sequence"
|
||||
msgstr ""
|
||||
|
||||
msgid "This G-code is inserted at every layer change before lifting z"
|
||||
msgstr ""
|
||||
"Dieser G-Code wird bei jedem Schichtwechsel vor dem anheben von Z eingefügt."
|
||||
|
|
@ -7159,7 +7168,7 @@ msgstr ""
|
|||
msgid "One wall threshold"
|
||||
msgstr "Schwellenwert für eine Wand"
|
||||
|
||||
#, c-format, boost-format
|
||||
#, fuzzy, c-format, boost-format
|
||||
msgid ""
|
||||
"If a top surface has to be printed and it's partially covered by another "
|
||||
"layer, it won't be considered at a top layer where its width is below this "
|
||||
|
|
@ -8063,13 +8072,13 @@ msgstr "Volle Lüfterdrehzahl ab Schicht"
|
|||
|
||||
msgid ""
|
||||
"Fan speed will be ramped up linearly from zero at layer "
|
||||
"\"close_fan_the_first_x_layers\" to maximum at layer "
|
||||
"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
|
||||
"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
|
||||
"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
|
||||
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
|
||||
"\". \"full_fan_speed_layer\" will be ignored if lower than "
|
||||
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
|
||||
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
|
||||
msgstr ""
|
||||
"Die Lüftergeschwindigkeit wird linear von Null bei der "
|
||||
"Schicht\"close_fan_the_first_x_layers\" auf das Maximum bei der Schicht "
|
||||
"Die Lüftergeschwindigkeit wird linear von Null bei der Schicht"
|
||||
"\"close_fan_the_first_x_layers\" auf das Maximum bei der Schicht "
|
||||
"\"full_fan_speed_layer\" erhöht. \"full_fan_speed_layer\" wird ignoriert, "
|
||||
"wenn es niedriger ist als \"close_fan_the_first_x_layers\",in diesem Fall "
|
||||
"läuft der Lüfter bei Schicht \"close_fan_the_first_x_layers\"+ 1 mit maximal "
|
||||
|
|
|
|||
|
|
@ -2,7 +2,7 @@ msgid ""
|
|||
msgstr ""
|
||||
"Project-Id-Version: Orca Slicer\n"
|
||||
"Report-Msgid-Bugs-To: \n"
|
||||
"POT-Creation-Date: 2023-08-14 19:56+0800\n"
|
||||
"POT-Creation-Date: 2023-08-19 22:08+0800\n"
|
||||
"PO-Revision-Date: \n"
|
||||
"Last-Translator: \n"
|
||||
"Language-Team: \n"
|
||||
|
|
@ -4851,6 +4851,12 @@ msgstr "Print sequence"
|
|||
msgid "Plate name"
|
||||
msgstr "Plate name"
|
||||
|
||||
msgid "Customize"
|
||||
msgstr ""
|
||||
|
||||
msgid "First Layer print sequence"
|
||||
msgstr ""
|
||||
|
||||
msgid "Same as Global Bed Type"
|
||||
msgstr "Same as Global Plate Type"
|
||||
|
||||
|
|
@ -5275,13 +5281,13 @@ msgstr ""
|
|||
msgid ""
|
||||
"When recording timelapse without toolhead, it is recommended to add a "
|
||||
"\"Timelapse Wipe Tower\" \n"
|
||||
"by right-click the empty position of build plate and choose \"Add "
|
||||
"Primitive\"->\"Timelapse Wipe Tower\"."
|
||||
"by right-click the empty position of build plate and choose \"Add Primitive"
|
||||
"\"->\"Timelapse Wipe Tower\"."
|
||||
msgstr ""
|
||||
"When recording timelapse without toolhead, it is recommended to add a "
|
||||
"\"Timelapse Wipe Tower\" \n"
|
||||
"by right-click the empty position of build plate and choose \"Add "
|
||||
"Primitive\"->\"Timelapse Wipe Tower\"."
|
||||
"by right-click the empty position of build plate and choose \"Add Primitive"
|
||||
"\"->\"Timelapse Wipe Tower\"."
|
||||
|
||||
msgid "Line width"
|
||||
msgstr "Line width"
|
||||
|
|
@ -6778,6 +6784,9 @@ msgstr ""
|
|||
msgid "Bed types supported by the printer"
|
||||
msgstr "Bed types supported by the printer"
|
||||
|
||||
msgid "First layer print sequence"
|
||||
msgstr ""
|
||||
|
||||
msgid "This G-code is inserted at every layer change before lifting z"
|
||||
msgstr "This G-code is inserted at every layer change before lifting z."
|
||||
|
||||
|
|
@ -7712,10 +7721,10 @@ msgstr "Full fan speed at layer"
|
|||
|
||||
msgid ""
|
||||
"Fan speed will be ramped up linearly from zero at layer "
|
||||
"\"close_fan_the_first_x_layers\" to maximum at layer "
|
||||
"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
|
||||
"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
|
||||
"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
|
||||
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
|
||||
"\". \"full_fan_speed_layer\" will be ignored if lower than "
|
||||
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
|
||||
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
|
||||
msgstr ""
|
||||
|
||||
msgid "Support interface fan speed"
|
||||
|
|
|
|||
|
|
@ -2,7 +2,7 @@ msgid ""
|
|||
msgstr ""
|
||||
"Project-Id-Version: Orca Slicer\n"
|
||||
"Report-Msgid-Bugs-To: \n"
|
||||
"POT-Creation-Date: 2023-08-14 19:56+0800\n"
|
||||
"POT-Creation-Date: 2023-08-19 22:08+0800\n"
|
||||
"PO-Revision-Date: \n"
|
||||
"Last-Translator: \n"
|
||||
"Language-Team: \n"
|
||||
|
|
@ -4967,6 +4967,12 @@ msgstr "Secuencia de impresión"
|
|||
msgid "Plate name"
|
||||
msgstr "Nombre de Bandeja"
|
||||
|
||||
msgid "Customize"
|
||||
msgstr ""
|
||||
|
||||
msgid "First Layer print sequence"
|
||||
msgstr ""
|
||||
|
||||
msgid "Same as Global Bed Type"
|
||||
msgstr "Lo mismo que el Tipo de Cama Global"
|
||||
|
||||
|
|
@ -5411,8 +5417,8 @@ msgstr ""
|
|||
msgid ""
|
||||
"When recording timelapse without toolhead, it is recommended to add a "
|
||||
"\"Timelapse Wipe Tower\" \n"
|
||||
"by right-click the empty position of build plate and choose \"Add "
|
||||
"Primitive\"->\"Timelapse Wipe Tower\"."
|
||||
"by right-click the empty position of build plate and choose \"Add Primitive"
|
||||
"\"->\"Timelapse Wipe Tower\"."
|
||||
msgstr ""
|
||||
"Cuando grabamos timelapse sin cabezal de impresión, es recomendable añadir "
|
||||
"un \"Torre de Purga de Intervalo\" \n"
|
||||
|
|
@ -6958,6 +6964,9 @@ msgstr ""
|
|||
msgid "Bed types supported by the printer"
|
||||
msgstr "Tipos de cama que admite la impresora"
|
||||
|
||||
msgid "First layer print sequence"
|
||||
msgstr ""
|
||||
|
||||
msgid "This G-code is inserted at every layer change before lifting z"
|
||||
msgstr "Este G-Code se inserta en cada cambio de capa antes de levantar z"
|
||||
|
||||
|
|
@ -7997,10 +8006,10 @@ msgstr "Velocidad máxima del ventilador en la capa"
|
|||
|
||||
msgid ""
|
||||
"Fan speed will be ramped up linearly from zero at layer "
|
||||
"\"close_fan_the_first_x_layers\" to maximum at layer "
|
||||
"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
|
||||
"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
|
||||
"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
|
||||
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
|
||||
"\". \"full_fan_speed_layer\" will be ignored if lower than "
|
||||
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
|
||||
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
|
||||
msgstr ""
|
||||
"La velocidad de ventilador se incrementará linealmente de cero a "
|
||||
"\"close_fan_the_first_x_layers\" al máximo de capa \"full_fan_speed_layer\". "
|
||||
|
|
@ -10389,8 +10398,8 @@ msgid ""
|
|||
msgstr ""
|
||||
"Colocar en la cara\n"
|
||||
"¿Sabías que puedes orientar rápidamente un modelo para que una de sus caras "
|
||||
"quede sobre el lecho de impresión? Seleccione la función \"Colocar en la "
|
||||
"cara\" o pulse la tecla <b>F</b>."
|
||||
"quede sobre el lecho de impresión? Seleccione la función \"Colocar en la cara"
|
||||
"\" o pulse la tecla <b>F</b>."
|
||||
|
||||
#: resources/data/hints.ini: [hint:Object List]
|
||||
msgid ""
|
||||
|
|
|
|||
|
|
@ -6,7 +6,7 @@ msgid ""
|
|||
msgstr ""
|
||||
"Project-Id-Version: Orca Slicer\n"
|
||||
"Report-Msgid-Bugs-To: \n"
|
||||
"POT-Creation-Date: 2023-08-14 19:56+0800\n"
|
||||
"POT-Creation-Date: 2023-08-19 22:08+0800\n"
|
||||
"PO-Revision-Date: \n"
|
||||
"Last-Translator: \n"
|
||||
"Language-Team: Guislain Cyril\n"
|
||||
|
|
@ -4979,6 +4979,12 @@ msgstr "Séquence d'impression"
|
|||
msgid "Plate name"
|
||||
msgstr "Nom du plateau"
|
||||
|
||||
msgid "Customize"
|
||||
msgstr ""
|
||||
|
||||
msgid "First Layer print sequence"
|
||||
msgstr ""
|
||||
|
||||
msgid "Same as Global Bed Type"
|
||||
msgstr "Identique au type de plateau par défaut"
|
||||
|
||||
|
|
@ -5441,8 +5447,8 @@ msgstr ""
|
|||
msgid ""
|
||||
"When recording timelapse without toolhead, it is recommended to add a "
|
||||
"\"Timelapse Wipe Tower\" \n"
|
||||
"by right-click the empty position of build plate and choose \"Add "
|
||||
"Primitive\"->\"Timelapse Wipe Tower\"."
|
||||
"by right-click the empty position of build plate and choose \"Add Primitive"
|
||||
"\"->\"Timelapse Wipe Tower\"."
|
||||
msgstr ""
|
||||
"Lors de l'enregistrement d'un Timelapse sans tête d'outil, il est recommandé "
|
||||
"d'ajouter une \"Tour d’essuyage Timelapse\"\n"
|
||||
|
|
@ -7011,6 +7017,9 @@ msgstr ""
|
|||
msgid "Bed types supported by the printer"
|
||||
msgstr "Types de plateaux pris en charge par l'imprimante"
|
||||
|
||||
msgid "First layer print sequence"
|
||||
msgstr ""
|
||||
|
||||
msgid "This G-code is inserted at every layer change before lifting z"
|
||||
msgstr "Ce G-code est inséré à chaque changement de couche avant la levée en Z"
|
||||
|
||||
|
|
@ -8022,10 +8031,10 @@ msgstr "Vitesse maximale du ventilateur à la couche"
|
|||
|
||||
msgid ""
|
||||
"Fan speed will be ramped up linearly from zero at layer "
|
||||
"\"close_fan_the_first_x_layers\" to maximum at layer "
|
||||
"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
|
||||
"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
|
||||
"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
|
||||
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
|
||||
"\". \"full_fan_speed_layer\" will be ignored if lower than "
|
||||
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
|
||||
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
|
||||
msgstr ""
|
||||
"La vitesse du ventilateur augmentera de manière linéaire à partir de zéro à "
|
||||
"la couche \"close_fan_the_first_x_layers\" jusqu’au maximum à la couche "
|
||||
|
|
|
|||
|
|
@ -2,7 +2,7 @@ msgid ""
|
|||
msgstr ""
|
||||
"Project-Id-Version: Orca Slicer\n"
|
||||
"Report-Msgid-Bugs-To: \n"
|
||||
"POT-Creation-Date: 2023-08-14 19:56+0800\n"
|
||||
"POT-Creation-Date: 2023-08-19 22:08+0800\n"
|
||||
"Language: hu\n"
|
||||
"MIME-Version: 1.0\n"
|
||||
"Content-Type: text/plain; charset=UTF-8\n"
|
||||
|
|
@ -4889,6 +4889,12 @@ msgstr "Nyomtatás sorrendje"
|
|||
msgid "Plate name"
|
||||
msgstr "Plate name"
|
||||
|
||||
msgid "Customize"
|
||||
msgstr ""
|
||||
|
||||
msgid "First Layer print sequence"
|
||||
msgstr ""
|
||||
|
||||
msgid "Same as Global Bed Type"
|
||||
msgstr "Ugyanaz, mint a globális tálca típusa"
|
||||
|
||||
|
|
@ -5321,8 +5327,8 @@ msgstr ""
|
|||
msgid ""
|
||||
"When recording timelapse without toolhead, it is recommended to add a "
|
||||
"\"Timelapse Wipe Tower\" \n"
|
||||
"by right-click the empty position of build plate and choose \"Add "
|
||||
"Primitive\"->\"Timelapse Wipe Tower\"."
|
||||
"by right-click the empty position of build plate and choose \"Add Primitive"
|
||||
"\"->\"Timelapse Wipe Tower\"."
|
||||
msgstr ""
|
||||
"Ha a nyomtatófej nélküli timelapse engedélyezve van, javasoljuk, hogy "
|
||||
"helyezz el a tálcán egy „Timelapse törlőtornyot“. Ehhez kattints jobb "
|
||||
|
|
@ -6848,6 +6854,9 @@ msgstr ""
|
|||
msgid "Bed types supported by the printer"
|
||||
msgstr "Nyomtató által támogatott asztaltípusok"
|
||||
|
||||
msgid "First layer print sequence"
|
||||
msgstr ""
|
||||
|
||||
msgid "This G-code is inserted at every layer change before lifting z"
|
||||
msgstr "Ez a G-kód minden rétegváltáshoz bekerül a Z tengely emelése előtt."
|
||||
|
||||
|
|
@ -7787,10 +7796,10 @@ msgstr "Teljes ventilátor fordulatszám ennél a rétegnél"
|
|||
|
||||
msgid ""
|
||||
"Fan speed will be ramped up linearly from zero at layer "
|
||||
"\"close_fan_the_first_x_layers\" to maximum at layer "
|
||||
"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
|
||||
"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
|
||||
"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
|
||||
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
|
||||
"\". \"full_fan_speed_layer\" will be ignored if lower than "
|
||||
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
|
||||
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
|
||||
msgstr ""
|
||||
|
||||
msgid "Support interface fan speed"
|
||||
|
|
|
|||
|
|
@ -2,7 +2,7 @@ msgid ""
|
|||
msgstr ""
|
||||
"Project-Id-Version: Orca Slicer\n"
|
||||
"Report-Msgid-Bugs-To: \n"
|
||||
"POT-Creation-Date: 2023-08-14 19:56+0800\n"
|
||||
"POT-Creation-Date: 2023-08-19 22:08+0800\n"
|
||||
"Language: it\n"
|
||||
"MIME-Version: 1.0\n"
|
||||
"Content-Type: text/plain; charset=UTF-8\n"
|
||||
|
|
@ -4877,6 +4877,12 @@ msgstr "Print sequence"
|
|||
msgid "Plate name"
|
||||
msgstr "Nome Piatto"
|
||||
|
||||
msgid "Customize"
|
||||
msgstr ""
|
||||
|
||||
msgid "First Layer print sequence"
|
||||
msgstr ""
|
||||
|
||||
msgid "Same as Global Bed Type"
|
||||
msgstr "Uguale al tipo di piano globale"
|
||||
|
||||
|
|
@ -5309,8 +5315,8 @@ msgstr ""
|
|||
msgid ""
|
||||
"When recording timelapse without toolhead, it is recommended to add a "
|
||||
"\"Timelapse Wipe Tower\" \n"
|
||||
"by right-click the empty position of build plate and choose \"Add "
|
||||
"Primitive\"->\"Timelapse Wipe Tower\"."
|
||||
"by right-click the empty position of build plate and choose \"Add Primitive"
|
||||
"\"->\"Timelapse Wipe Tower\"."
|
||||
msgstr ""
|
||||
"Quando si registra un timelapse senza testa di satmpa, si consiglia di "
|
||||
"aggiungere un \"Timelapse Torre di pulizia\"\n"
|
||||
|
|
@ -6207,8 +6213,8 @@ msgid ""
|
|||
msgstr ""
|
||||
"È stato rilevato un aggiornamento importante che deve essere eseguito prima "
|
||||
"che la stampa possa continuare. Si desidera aggiornare ora? È possibile "
|
||||
"effettuare l'aggiornamento anche in un secondo momento da \"Aggiorna "
|
||||
"firmware\"."
|
||||
"effettuare l'aggiornamento anche in un secondo momento da \"Aggiorna firmware"
|
||||
"\"."
|
||||
|
||||
msgid ""
|
||||
"The firmware version is abnormal. Repairing and updating are required before "
|
||||
|
|
@ -6821,6 +6827,9 @@ msgstr ""
|
|||
msgid "Bed types supported by the printer"
|
||||
msgstr "Bed types supported by the printer"
|
||||
|
||||
msgid "First layer print sequence"
|
||||
msgstr ""
|
||||
|
||||
msgid "This G-code is inserted at every layer change before lifting z"
|
||||
msgstr "This G-code is inserted at every layer change before lifting z."
|
||||
|
||||
|
|
@ -7760,10 +7769,10 @@ msgstr "Massima velocità della ventola al layer"
|
|||
|
||||
msgid ""
|
||||
"Fan speed will be ramped up linearly from zero at layer "
|
||||
"\"close_fan_the_first_x_layers\" to maximum at layer "
|
||||
"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
|
||||
"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
|
||||
"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
|
||||
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
|
||||
"\". \"full_fan_speed_layer\" will be ignored if lower than "
|
||||
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
|
||||
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
|
||||
msgstr ""
|
||||
|
||||
msgid "Support interface fan speed"
|
||||
|
|
@ -11827,8 +11836,8 @@ msgstr ""
|
|||
#~ "Quando si registra un timelapse senza testa di satmpa, si consiglia di "
|
||||
#~ "aggiungere un \"Timelapse Torre di pulizia\"\n"
|
||||
#~ "facendo clic con il pulsante destro del mouse sulla posizione vuota del "
|
||||
#~ "piatto e scegli \"Aggiungi primitiva\" ->\"Timelapse Torre di "
|
||||
#~ "pulizia\"».\n"
|
||||
#~ "piatto e scegli \"Aggiungi primitiva\" ->\"Timelapse Torre di pulizia"
|
||||
#~ "\"».\n"
|
||||
|
||||
#~ msgid ""
|
||||
#~ "When sparse infill density is low, the internal solid infill or internal "
|
||||
|
|
|
|||
|
|
@ -2,7 +2,7 @@ msgid ""
|
|||
msgstr ""
|
||||
"Project-Id-Version: Orca Slicer\n"
|
||||
"Report-Msgid-Bugs-To: \n"
|
||||
"POT-Creation-Date: 2023-08-14 19:56+0800\n"
|
||||
"POT-Creation-Date: 2023-08-19 22:08+0800\n"
|
||||
"PO-Revision-Date: \n"
|
||||
"Last-Translator: \n"
|
||||
"Language-Team: \n"
|
||||
|
|
@ -4767,6 +4767,12 @@ msgstr "造形シーケンス"
|
|||
msgid "Plate name"
|
||||
msgstr "Plate name"
|
||||
|
||||
msgid "Customize"
|
||||
msgstr ""
|
||||
|
||||
msgid "First Layer print sequence"
|
||||
msgstr ""
|
||||
|
||||
msgid "Same as Global Bed Type"
|
||||
msgstr "全般設定の「ベッドタイプ」と同様"
|
||||
|
||||
|
|
@ -5171,8 +5177,8 @@ msgstr ""
|
|||
msgid ""
|
||||
"When recording timelapse without toolhead, it is recommended to add a "
|
||||
"\"Timelapse Wipe Tower\" \n"
|
||||
"by right-click the empty position of build plate and choose \"Add "
|
||||
"Primitive\"->\"Timelapse Wipe Tower\"."
|
||||
"by right-click the empty position of build plate and choose \"Add Primitive"
|
||||
"\"->\"Timelapse Wipe Tower\"."
|
||||
msgstr ""
|
||||
"ヘッド無しのタイムラプスビデオを録画する時に、「タイムラプスプライムタワー」"
|
||||
"を追加してください。プレートで右クリックして、「プリミティブを追加」→「タイム"
|
||||
|
|
@ -6616,6 +6622,9 @@ msgstr ""
|
|||
msgid "Bed types supported by the printer"
|
||||
msgstr "適応ベッド種類"
|
||||
|
||||
msgid "First layer print sequence"
|
||||
msgstr ""
|
||||
|
||||
msgid "This G-code is inserted at every layer change before lifting z"
|
||||
msgstr "積層が変わる直前に実行するG-codeです。"
|
||||
|
||||
|
|
@ -7508,10 +7517,10 @@ msgstr "最大回転速度の積層"
|
|||
|
||||
msgid ""
|
||||
"Fan speed will be ramped up linearly from zero at layer "
|
||||
"\"close_fan_the_first_x_layers\" to maximum at layer "
|
||||
"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
|
||||
"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
|
||||
"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
|
||||
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
|
||||
"\". \"full_fan_speed_layer\" will be ignored if lower than "
|
||||
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
|
||||
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
|
||||
msgstr ""
|
||||
|
||||
msgid "Support interface fan speed"
|
||||
|
|
|
|||
|
|
@ -7,7 +7,7 @@ msgid ""
|
|||
msgstr ""
|
||||
"Project-Id-Version: Orca Slicer\n"
|
||||
"Report-Msgid-Bugs-To: \n"
|
||||
"POT-Creation-Date: 2023-08-14 19:56+0800\n"
|
||||
"POT-Creation-Date: 2023-08-19 22:08+0800\n"
|
||||
"PO-Revision-Date: 2023-08-03 10:45+0900\n"
|
||||
"Last-Translator: Hotsolidinfill\n"
|
||||
"Language-Team: \n"
|
||||
|
|
@ -4829,6 +4829,12 @@ msgstr "출력 순서"
|
|||
msgid "Plate name"
|
||||
msgstr "플레이트 이름"
|
||||
|
||||
msgid "Customize"
|
||||
msgstr ""
|
||||
|
||||
msgid "First Layer print sequence"
|
||||
msgstr ""
|
||||
|
||||
msgid "Same as Global Bed Type"
|
||||
msgstr "글로벌 베드유형과 동일"
|
||||
|
||||
|
|
@ -5243,8 +5249,8 @@ msgstr ""
|
|||
msgid ""
|
||||
"When recording timelapse without toolhead, it is recommended to add a "
|
||||
"\"Timelapse Wipe Tower\" \n"
|
||||
"by right-click the empty position of build plate and choose \"Add "
|
||||
"Primitive\"->\"Timelapse Wipe Tower\"."
|
||||
"by right-click the empty position of build plate and choose \"Add Primitive"
|
||||
"\"->\"Timelapse Wipe Tower\"."
|
||||
msgstr ""
|
||||
"툴헤드 없이 시간 경과를 기록할 경우 \"시간 경과 제거 타워\"를 추가하는 것이 "
|
||||
"좋습니다\n"
|
||||
|
|
@ -6728,6 +6734,9 @@ msgstr ""
|
|||
msgid "Bed types supported by the printer"
|
||||
msgstr "프린터가 지원하는 침대 유형"
|
||||
|
||||
msgid "First layer print sequence"
|
||||
msgstr ""
|
||||
|
||||
msgid "This G-code is inserted at every layer change before lifting z"
|
||||
msgstr "이 G코드는 Z를 올리기 전에 모든 레이어 변경에 삽입됩니다"
|
||||
|
||||
|
|
@ -7675,10 +7684,10 @@ msgstr "팬 최대 속도 레이어"
|
|||
|
||||
msgid ""
|
||||
"Fan speed will be ramped up linearly from zero at layer "
|
||||
"\"close_fan_the_first_x_layers\" to maximum at layer "
|
||||
"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
|
||||
"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
|
||||
"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
|
||||
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
|
||||
"\". \"full_fan_speed_layer\" will be ignored if lower than "
|
||||
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
|
||||
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
|
||||
msgstr ""
|
||||
"팬 속도는 \"close_fan_the_first_x_layers\" 의 0에서 \"full_fan_speed_layer\" "
|
||||
"의 최고 속도까지 선형적으로 증가합니다. \"full_fan_speed_layer\"가 "
|
||||
|
|
|
|||
|
|
@ -2,7 +2,7 @@ msgid ""
|
|||
msgstr ""
|
||||
"Project-Id-Version: Orca Slicer\n"
|
||||
"Report-Msgid-Bugs-To: \n"
|
||||
"POT-Creation-Date: 2023-08-14 19:56+0800\n"
|
||||
"POT-Creation-Date: 2023-08-19 22:08+0800\n"
|
||||
"Language: nl\n"
|
||||
"MIME-Version: 1.0\n"
|
||||
"Content-Type: text/plain; charset=UTF-8\n"
|
||||
|
|
@ -4933,6 +4933,12 @@ msgstr "Afdrukvolgorde"
|
|||
msgid "Plate name"
|
||||
msgstr "Plate name"
|
||||
|
||||
msgid "Customize"
|
||||
msgstr ""
|
||||
|
||||
msgid "First Layer print sequence"
|
||||
msgstr ""
|
||||
|
||||
msgid "Same as Global Bed Type"
|
||||
msgstr "Hetzelfde als Global Bed Type"
|
||||
|
||||
|
|
@ -5379,8 +5385,8 @@ msgstr ""
|
|||
msgid ""
|
||||
"When recording timelapse without toolhead, it is recommended to add a "
|
||||
"\"Timelapse Wipe Tower\" \n"
|
||||
"by right-click the empty position of build plate and choose \"Add "
|
||||
"Primitive\"->\"Timelapse Wipe Tower\"."
|
||||
"by right-click the empty position of build plate and choose \"Add Primitive"
|
||||
"\"->\"Timelapse Wipe Tower\"."
|
||||
msgstr ""
|
||||
"Bij het opnemen van timelapse zonder toolhead is het aan te raden om een "
|
||||
"„Timelapse Wipe Tower” toe te voegen \n"
|
||||
|
|
@ -6923,6 +6929,9 @@ msgstr ""
|
|||
msgid "Bed types supported by the printer"
|
||||
msgstr "Printbedden ondersteund door de printer"
|
||||
|
||||
msgid "First layer print sequence"
|
||||
msgstr ""
|
||||
|
||||
msgid "This G-code is inserted at every layer change before lifting z"
|
||||
msgstr ""
|
||||
"De G-code wordt bij iedere laagwisseling toegevoegd voor het optillen van Z"
|
||||
|
|
@ -7874,10 +7883,10 @@ msgstr "Volledige snelheid op laag"
|
|||
|
||||
msgid ""
|
||||
"Fan speed will be ramped up linearly from zero at layer "
|
||||
"\"close_fan_the_first_x_layers\" to maximum at layer "
|
||||
"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
|
||||
"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
|
||||
"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
|
||||
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
|
||||
"\". \"full_fan_speed_layer\" will be ignored if lower than "
|
||||
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
|
||||
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
|
||||
msgstr ""
|
||||
|
||||
msgid "Support interface fan speed"
|
||||
|
|
|
|||
|
|
@ -7,7 +7,7 @@ msgid ""
|
|||
msgstr ""
|
||||
"Project-Id-Version: OrcaSlicer\n"
|
||||
"Report-Msgid-Bugs-To: \n"
|
||||
"POT-Creation-Date: 2023-08-14 19:56+0800\n"
|
||||
"POT-Creation-Date: 2023-08-19 22:08+0800\n"
|
||||
"PO-Revision-Date: 2023-08-08 15:05+0300\n"
|
||||
"Last-Translator: Ilya <Lizardjazz1@gmail.com>\n"
|
||||
"Language-Team: SPb 3D Printing\n"
|
||||
|
|
@ -15,8 +15,8 @@ msgstr ""
|
|||
"MIME-Version: 1.0\n"
|
||||
"Content-Type: text/plain; charset=UTF-8\n"
|
||||
"Content-Transfer-Encoding: 8bit\n"
|
||||
"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && "
|
||||
"n%10<=4 && (n%100<12 || n%100>14) ? 1 : 2);\n"
|
||||
"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n"
|
||||
"%10<=4 && (n%100<12 || n%100>14) ? 1 : 2);\n"
|
||||
"X-Generator: Poedit 3.3.2\n"
|
||||
|
||||
msgid "Supports Painting"
|
||||
|
|
@ -4949,6 +4949,12 @@ msgstr "Последовательность печати"
|
|||
msgid "Plate name"
|
||||
msgstr "Название области"
|
||||
|
||||
msgid "Customize"
|
||||
msgstr ""
|
||||
|
||||
msgid "First Layer print sequence"
|
||||
msgstr ""
|
||||
|
||||
msgid "Same as Global Bed Type"
|
||||
msgstr "То же, что и глобальный тип стола"
|
||||
|
||||
|
|
@ -5386,8 +5392,8 @@ msgstr ""
|
|||
msgid ""
|
||||
"When recording timelapse without toolhead, it is recommended to add a "
|
||||
"\"Timelapse Wipe Tower\" \n"
|
||||
"by right-click the empty position of build plate and choose \"Add "
|
||||
"Primitive\"->\"Timelapse Wipe Tower\"."
|
||||
"by right-click the empty position of build plate and choose \"Add Primitive"
|
||||
"\"->\"Timelapse Wipe Tower\"."
|
||||
msgstr ""
|
||||
"При записи таймлапса без инструментальной головки рекомендуется добавить "
|
||||
"\"Timelapse Wipe Tower\"\n"
|
||||
|
|
@ -6915,6 +6921,9 @@ msgstr ""
|
|||
msgid "Bed types supported by the printer"
|
||||
msgstr "Типы столов, поддерживаемые принтером"
|
||||
|
||||
msgid "First layer print sequence"
|
||||
msgstr ""
|
||||
|
||||
msgid "This G-code is inserted at every layer change before lifting z"
|
||||
msgstr "Типы столов, поддерживаемые принтером"
|
||||
|
||||
|
|
@ -7931,10 +7940,10 @@ msgstr "Полная скорость вентилятора на слое"
|
|||
|
||||
msgid ""
|
||||
"Fan speed will be ramped up linearly from zero at layer "
|
||||
"\"close_fan_the_first_x_layers\" to maximum at layer "
|
||||
"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
|
||||
"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
|
||||
"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
|
||||
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
|
||||
"\". \"full_fan_speed_layer\" will be ignored if lower than "
|
||||
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
|
||||
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
|
||||
msgstr ""
|
||||
"Скорость вентилятора линейно увеличивается от нуля на уровне "
|
||||
"«close_fan_the_first_x_layers» до максимума на уровне "
|
||||
|
|
|
|||
|
|
@ -2,7 +2,7 @@ msgid ""
|
|||
msgstr ""
|
||||
"Project-Id-Version: Orca Slicer\n"
|
||||
"Report-Msgid-Bugs-To: \n"
|
||||
"POT-Creation-Date: 2023-08-14 19:56+0800\n"
|
||||
"POT-Creation-Date: 2023-08-19 22:08+0800\n"
|
||||
"Language: sv\n"
|
||||
"MIME-Version: 1.0\n"
|
||||
"Content-Type: text/plain; charset=UTF-8\n"
|
||||
|
|
@ -4862,6 +4862,12 @@ msgstr "Utskrifts sekvens"
|
|||
msgid "Plate name"
|
||||
msgstr "Plattans namn"
|
||||
|
||||
msgid "Customize"
|
||||
msgstr ""
|
||||
|
||||
msgid "First Layer print sequence"
|
||||
msgstr ""
|
||||
|
||||
msgid "Same as Global Bed Type"
|
||||
msgstr "Samma som Global Bed Type"
|
||||
|
||||
|
|
@ -5293,8 +5299,8 @@ msgstr ""
|
|||
msgid ""
|
||||
"When recording timelapse without toolhead, it is recommended to add a "
|
||||
"\"Timelapse Wipe Tower\" \n"
|
||||
"by right-click the empty position of build plate and choose \"Add "
|
||||
"Primitive\"->\"Timelapse Wipe Tower\"."
|
||||
"by right-click the empty position of build plate and choose \"Add Primitive"
|
||||
"\"->\"Timelapse Wipe Tower\"."
|
||||
msgstr ""
|
||||
"När du spelar in timelapse utan verktygshuvud rekommenderas att du lägger "
|
||||
"till ett \"Timelapse Wipe Tower\".\n"
|
||||
|
|
@ -6791,6 +6797,9 @@ msgstr ""
|
|||
msgid "Bed types supported by the printer"
|
||||
msgstr "Byggplattans typ stöds av skrivaren"
|
||||
|
||||
msgid "First layer print sequence"
|
||||
msgstr ""
|
||||
|
||||
msgid "This G-code is inserted at every layer change before lifting z"
|
||||
msgstr "Denna G-kod används för varje lager innan Z axis lyfts"
|
||||
|
||||
|
|
@ -7071,9 +7080,9 @@ msgid ""
|
|||
"quality for needle and small details"
|
||||
msgstr ""
|
||||
"Aktivera detta val för att sänka utskifts hastigheten för att göra den sista "
|
||||
"lager tiden inte kortare än lager tidströskeln \"Max fläkthastighets "
|
||||
"tröskel\", detta så att lager kan kylas under en längre tid. Detta kan "
|
||||
"förbättra kylnings kvaliteten för små detaljer"
|
||||
"lager tiden inte kortare än lager tidströskeln \"Max fläkthastighets tröskel"
|
||||
"\", detta så att lager kan kylas under en längre tid. Detta kan förbättra "
|
||||
"kylnings kvaliteten för små detaljer"
|
||||
|
||||
msgid "Normal printing"
|
||||
msgstr "Normal utskrift"
|
||||
|
|
@ -7719,10 +7728,10 @@ msgstr "Full fläkthastighet vid lager"
|
|||
|
||||
msgid ""
|
||||
"Fan speed will be ramped up linearly from zero at layer "
|
||||
"\"close_fan_the_first_x_layers\" to maximum at layer "
|
||||
"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
|
||||
"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
|
||||
"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
|
||||
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
|
||||
"\". \"full_fan_speed_layer\" will be ignored if lower than "
|
||||
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
|
||||
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
|
||||
msgstr ""
|
||||
|
||||
msgid "Support interface fan speed"
|
||||
|
|
@ -10495,9 +10504,9 @@ msgstr ""
|
|||
#~ "Tack för att du har köpt en Bambu Lab enhet. Innan du använder din Bambu "
|
||||
#~ "Lab enhet ska du läsa villkoren. Genom att klicka för att godkänna "
|
||||
#~ "användningen av din Bambu Lab enhet godkänner du att följa "
|
||||
#~ "sekretesspolicyn och användningsvillkoren (gemensamt kallade "
|
||||
#~ "\"Villkor\"). Om du inte följer eller samtycker till Bambu Labs "
|
||||
#~ "integritetspolicy ska du inte använda Bambu Labs utrustning och tjänster."
|
||||
#~ "sekretesspolicyn och användningsvillkoren (gemensamt kallade \"Villkor"
|
||||
#~ "\"). Om du inte följer eller samtycker till Bambu Labs integritetspolicy "
|
||||
#~ "ska du inte använda Bambu Labs utrustning och tjänster."
|
||||
|
||||
#~ msgid "and"
|
||||
#~ msgstr "och"
|
||||
|
|
|
|||
|
|
@ -7,7 +7,7 @@ msgid ""
|
|||
msgstr ""
|
||||
"Project-Id-Version: \n"
|
||||
"Report-Msgid-Bugs-To: \n"
|
||||
"POT-Creation-Date: 2023-08-14 19:56+0800\n"
|
||||
"POT-Creation-Date: 2023-08-19 22:08+0800\n"
|
||||
"PO-Revision-Date: 2023-08-10 20:25-0400\n"
|
||||
"Last-Translator: \n"
|
||||
"Language-Team: \n"
|
||||
|
|
@ -15,8 +15,8 @@ msgstr ""
|
|||
"MIME-Version: 1.0\n"
|
||||
"Content-Type: text/plain; charset=UTF-8\n"
|
||||
"Content-Transfer-Encoding: 8bit\n"
|
||||
"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && "
|
||||
"n%10<=4 && (n%100<12 || n%100>14) ? 1 : 2);\n"
|
||||
"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n"
|
||||
"%10<=4 && (n%100<12 || n%100>14) ? 1 : 2);\n"
|
||||
"X-Generator: Poedit 3.3.2\n"
|
||||
|
||||
msgid "Supports Painting"
|
||||
|
|
@ -4939,6 +4939,12 @@ msgstr "Послідовність друку"
|
|||
msgid "Plate name"
|
||||
msgstr "Назва пластини"
|
||||
|
||||
msgid "Customize"
|
||||
msgstr ""
|
||||
|
||||
msgid "First Layer print sequence"
|
||||
msgstr ""
|
||||
|
||||
msgid "Same as Global Bed Type"
|
||||
msgstr "Те ж, що й глобальний тип столу"
|
||||
|
||||
|
|
@ -5368,8 +5374,8 @@ msgstr ""
|
|||
msgid ""
|
||||
"When recording timelapse without toolhead, it is recommended to add a "
|
||||
"\"Timelapse Wipe Tower\" \n"
|
||||
"by right-click the empty position of build plate and choose \"Add "
|
||||
"Primitive\"->\"Timelapse Wipe Tower\"."
|
||||
"by right-click the empty position of build plate and choose \"Add Primitive"
|
||||
"\"->\"Timelapse Wipe Tower\"."
|
||||
msgstr ""
|
||||
"При записі таймлапсу без інструментальної головки рекомендується додати "
|
||||
"“Timelapse Wipe Tower” \n"
|
||||
|
|
@ -6889,6 +6895,9 @@ msgstr ""
|
|||
msgid "Bed types supported by the printer"
|
||||
msgstr "Типи ліжок, які підтримує принтер"
|
||||
|
||||
msgid "First layer print sequence"
|
||||
msgstr ""
|
||||
|
||||
msgid "This G-code is inserted at every layer change before lifting z"
|
||||
msgstr "Типи ліжок, які підтримує принтер"
|
||||
|
||||
|
|
@ -7888,10 +7897,10 @@ msgstr "Повна швидкість вентилятора на шарі"
|
|||
|
||||
msgid ""
|
||||
"Fan speed will be ramped up linearly from zero at layer "
|
||||
"\"close_fan_the_first_x_layers\" to maximum at layer "
|
||||
"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
|
||||
"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
|
||||
"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
|
||||
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
|
||||
"\". \"full_fan_speed_layer\" will be ignored if lower than "
|
||||
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
|
||||
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
|
||||
msgstr ""
|
||||
"Швидкість вентилятора лінійно збільшується від нуля на "
|
||||
"рівні«close_fan_the_first_x_layers» до максимуму на рівні "
|
||||
|
|
|
|||
|
|
@ -6,7 +6,7 @@ msgid ""
|
|||
msgstr ""
|
||||
"Project-Id-Version: Slic3rPE\n"
|
||||
"Report-Msgid-Bugs-To: \n"
|
||||
"POT-Creation-Date: 2023-08-14 19:56+0800\n"
|
||||
"POT-Creation-Date: 2023-08-19 22:08+0800\n"
|
||||
"PO-Revision-Date: 2023-04-01 13:21+0800\n"
|
||||
"Last-Translator: Jiang Yue <maze1024@gmail.com>\n"
|
||||
"Language-Team: \n"
|
||||
|
|
@ -4719,6 +4719,12 @@ msgstr "打印顺序"
|
|||
msgid "Plate name"
|
||||
msgstr "盘名称"
|
||||
|
||||
msgid "Customize"
|
||||
msgstr "自定义"
|
||||
|
||||
msgid "First Layer print sequence"
|
||||
msgstr ""
|
||||
|
||||
msgid "Same as Global Bed Type"
|
||||
msgstr "跟随全局热床类型"
|
||||
|
||||
|
|
@ -5124,8 +5130,8 @@ msgstr ""
|
|||
msgid ""
|
||||
"When recording timelapse without toolhead, it is recommended to add a "
|
||||
"\"Timelapse Wipe Tower\" \n"
|
||||
"by right-click the empty position of build plate and choose \"Add "
|
||||
"Primitive\"->\"Timelapse Wipe Tower\"."
|
||||
"by right-click the empty position of build plate and choose \"Add Primitive"
|
||||
"\"->\"Timelapse Wipe Tower\"."
|
||||
msgstr ""
|
||||
"在录制无工具头延时摄影视频时，建议添加“延时摄影擦料塔”\n"
|
||||
"右键单击打印板的空白位置，选择“添加标准模型”->“延时摄影擦料塔”。"
|
||||
|
|
@ -6529,6 +6535,9 @@ msgstr "首层热床温度。0值表示这个耗材丝不支持纹理PEI热床"
|
|||
msgid "Bed types supported by the printer"
|
||||
msgstr "打印机所支持的热床类型"
|
||||
|
||||
msgid "First layer print sequence"
|
||||
msgstr ""
|
||||
|
||||
msgid "This G-code is inserted at every layer change before lifting z"
|
||||
msgstr "在每次换层抬升z高度之前插入这段G-code"
|
||||
|
||||
|
|
@ -7421,10 +7430,10 @@ msgstr "满速风扇在"
|
|||
|
||||
msgid ""
|
||||
"Fan speed will be ramped up linearly from zero at layer "
|
||||
"\"close_fan_the_first_x_layers\" to maximum at layer "
|
||||
"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
|
||||
"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
|
||||
"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
|
||||
"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
|
||||
"\". \"full_fan_speed_layer\" will be ignored if lower than "
|
||||
"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
|
||||
"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
|
||||
msgstr ""
|
||||
"风扇速度将从“禁用第一层”的零线性上升到“全风扇速度层”的最大。如果低于“禁用风扇"
|
||||
"第一层”，则“全风扇速度第一层”将被忽略，在这种情况下，风扇将在“禁用风扇第一"
|
||||
|
|
@ -9713,6 +9722,12 @@ msgstr ""
|
|||
"提高强度\n"
|
||||
"你知道吗？你可以使用更多的墙层数和更高的疏散填充密度来提高模型的强度。"
|
||||
|
||||
#~ msgid "First layer filament sequence"
|
||||
#~ msgstr "首层耗材打印顺序"
|
||||
|
||||
#~ msgid "The failed test result has been dropped."
|
||||
#~ msgstr "测试失败的结果已被删除。"
|
||||
|
||||
#~ msgid ""
|
||||
#~ "The configuration may be generated by a newer version of BambuStudio."
|
||||
#~ msgstr "此配置可能由新版本的Bambu Studio生成。"
|
||||
|
|
@ -14583,8 +14598,8 @@ msgstr ""
|
|||
#~ msgstr "正在准备设置页"
|
||||
|
||||
#~ msgid ""
|
||||
#~ "You have the following presets with saved options for \"Print Host "
|
||||
#~ "upload\""
|
||||
#~ "You have the following presets with saved options for \"Print Host upload"
|
||||
#~ "\""
|
||||
#~ msgstr "您的以下预设中包含未保存的选项“打印主机上传”"
|
||||
|
||||
#~ msgid ""
|
||||
|
|
|
|||
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Loading…
Add table
Add a link
Reference in a new issue