diff --git a/localization/i18n/OrcaSlicer.pot b/localization/i18n/OrcaSlicer.pot index b917fc9d23..419a2f1f4a 100644 --- a/localization/i18n/OrcaSlicer.pot +++ b/localization/i18n/OrcaSlicer.pot @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-08-14 19:56+0800\n" +"POT-Creation-Date: 2023-08-19 22:08+0800\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -4610,6 +4610,12 @@ msgstr "" msgid "Plate name" msgstr "" +msgid "Customize" +msgstr "" + +msgid "First Layer print sequence" +msgstr "" + msgid "Same as Global Bed Type" msgstr "" @@ -4992,8 +4998,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" msgid "Line width" @@ -6363,6 +6369,9 @@ msgstr "" msgid "Bed types supported by the printer" msgstr "" +msgid "First layer print sequence" +msgstr "" + msgid "This G-code is inserted at every layer change before lifting z" msgstr "" @@ -7198,10 +7207,10 @@ msgstr "" msgid "" "Fan speed will be ramped up linearly from zero at layer " -"\"close_fan_the_first_x_layers\" to maximum at layer " -"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower " -"than \"close_fan_the_first_x_layers\", in which case the fan will be running " -"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." +"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer" +"\". \"full_fan_speed_layer\" will be ignored if lower than " +"\"close_fan_the_first_x_layers\", in which case the fan will be running at " +"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "" msgid "Support interface fan speed" diff --git a/localization/i18n/cs/OrcaSlicer_cs.po b/localization/i18n/cs/OrcaSlicer_cs.po index 8f7dae2733..1206e28d8f 100644 --- a/localization/i18n/cs/OrcaSlicer_cs.po +++ b/localization/i18n/cs/OrcaSlicer_cs.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-08-14 19:56+0800\n" +"POT-Creation-Date: 2023-08-19 22:08+0800\n" "PO-Revision-Date: 2023-07-17 21:51+0200\n" "Last-Translator: Momo \n" "Language-Team: \n" @@ -4895,6 +4895,12 @@ msgstr "Tisková sekvence" msgid "Plate name" msgstr "Název Podložky" +msgid "Customize" +msgstr "" + +msgid "First Layer print sequence" +msgstr "" + msgid "Same as Global Bed Type" msgstr "Stejné jako globální typ Podložky" @@ -5317,8 +5323,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "Při nahrávání časosběru bez nástrojové hlavy se doporučuje přidat " "\"Timelapse Wipe Tower\" \n" @@ -6823,6 +6829,9 @@ msgstr "" msgid "Bed types supported by the printer" msgstr "Typy podložek podporované tiskárnou" +msgid "First layer print sequence" +msgstr "" + msgid "This G-code is inserted at every layer change before lifting z" msgstr "Tento G-kód se vkládá při každé změně vrstvy před zvednutím z" @@ -7804,10 +7813,10 @@ msgstr "Maximální otáčky ventilátoru ve vrstvě" msgid "" "Fan speed will be ramped up linearly from zero at layer " -"\"close_fan_the_first_x_layers\" to maximum at layer " -"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower " -"than \"close_fan_the_first_x_layers\", in which case the fan will be running " -"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." +"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer" +"\". \"full_fan_speed_layer\" will be ignored if lower than " +"\"close_fan_the_first_x_layers\", in which case the fan will be running at " +"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "" "Otáčky ventilátoru se lineárně zvýší z nuly ve vrstvě " "\"close_fan_first_layers\" na maximum ve vrstvě \"full_fan_speed_layer\". " @@ -10125,8 +10134,8 @@ msgid "" msgstr "" "Plochou na podložku\n" "Věděli jste, že můžete rychle nastavit orientaci modelu tak, aby jedna z " -"jeho stěn spočívala na tiskovém podloží? Vyberte funkci \"Plochou na " -"podložku\" nebo stiskněte klávesu F." +"jeho stěn spočívala na tiskovém podloží? Vyberte funkci \"Plochou na podložku" +"\" nebo stiskněte klávesu F." #: resources/data/hints.ini: [hint:Object List] msgid "" diff --git a/localization/i18n/de/OrcaSlicer_de.po b/localization/i18n/de/OrcaSlicer_de.po index f556aafdb8..201eb3db7a 100644 --- a/localization/i18n/de/OrcaSlicer_de.po +++ b/localization/i18n/de/OrcaSlicer_de.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-08-18 09:11+0200\n" +"POT-Creation-Date: 2023-08-19 22:08+0800\n" "PO-Revision-Date: \n" "Last-Translator: Heiko Liebscher \n" "Language-Team: \n" @@ -4658,7 +4658,7 @@ msgstr "Anzahl der aktuell ausgewählten Teile: %1%\n" #, boost-format msgid "Number of currently selected objects: %1%\n" -msgstr "Anzahl der aktuell ausgewählten Objekte: %1%" +msgstr "Anzahl der aktuell ausgewählten Objekte: %1%\n" #, boost-format msgid "Part name: %1%\n" @@ -5005,6 +5005,12 @@ msgstr "Druckreihenfolge" msgid "Plate name" msgstr "Platten-Name" +msgid "Customize" +msgstr "" + +msgid "First Layer print sequence" +msgstr "" + msgid "Same as Global Bed Type" msgstr "Entspricht dem allgemeinen Bettyp" @@ -5458,13 +5464,13 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "Wenn Sie einen Zeitraffer ohne Werkzeugkopf aufnehmen, wird empfohlen, einen " "\"Timelapse Wischturm\" hinzuzufügen, indem Sie mit der rechten Maustaste " -"auf die leere Position der Bauplatte klicken und \"Primitiv hinzufügen\"-" -">\"Timelapse Wischturm\" wählen." +"auf die leere Position der Bauplatte klicken und \"Primitiv hinzufügen\"->" +"\"Timelapse Wischturm\" wählen." msgid "Line width" msgstr "Breite der Linie" @@ -7016,6 +7022,9 @@ msgstr "" msgid "Bed types supported by the printer" msgstr "Vom Drucker unterstützte Druckbettypen" +msgid "First layer print sequence" +msgstr "" + msgid "This G-code is inserted at every layer change before lifting z" msgstr "" "Dieser G-Code wird bei jedem Schichtwechsel vor dem anheben von Z eingefügt." @@ -7159,7 +7168,7 @@ msgstr "" msgid "One wall threshold" msgstr "Schwellenwert für eine Wand" -#, c-format, boost-format +#, fuzzy, c-format, boost-format msgid "" "If a top surface has to be printed and it's partially covered by another " "layer, it won't be considered at a top layer where its width is below this " @@ -8063,13 +8072,13 @@ msgstr "Volle Lüfterdrehzahl ab Schicht" msgid "" "Fan speed will be ramped up linearly from zero at layer " -"\"close_fan_the_first_x_layers\" to maximum at layer " -"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower " -"than \"close_fan_the_first_x_layers\", in which case the fan will be running " -"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." +"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer" +"\". \"full_fan_speed_layer\" will be ignored if lower than " +"\"close_fan_the_first_x_layers\", in which case the fan will be running at " +"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "" -"Die Lüftergeschwindigkeit wird linear von Null bei der " -"Schicht\"close_fan_the_first_x_layers\" auf das Maximum bei der Schicht " +"Die Lüftergeschwindigkeit wird linear von Null bei der Schicht" +"\"close_fan_the_first_x_layers\" auf das Maximum bei der Schicht " "\"full_fan_speed_layer\" erhöht. \"full_fan_speed_layer\" wird ignoriert, " "wenn es niedriger ist als \"close_fan_the_first_x_layers\",in diesem Fall " "läuft der Lüfter bei Schicht \"close_fan_the_first_x_layers\"+ 1 mit maximal " diff --git a/localization/i18n/en/OrcaSlicer_en.po b/localization/i18n/en/OrcaSlicer_en.po index 1492174ded..017f3749f5 100644 --- a/localization/i18n/en/OrcaSlicer_en.po +++ b/localization/i18n/en/OrcaSlicer_en.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-08-14 19:56+0800\n" +"POT-Creation-Date: 2023-08-19 22:08+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -4851,6 +4851,12 @@ msgstr "Print sequence" msgid "Plate name" msgstr "Plate name" +msgid "Customize" +msgstr "" + +msgid "First Layer print sequence" +msgstr "" + msgid "Same as Global Bed Type" msgstr "Same as Global Plate Type" @@ -5275,13 +5281,13 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgid "Line width" msgstr "Line width" @@ -6778,6 +6784,9 @@ msgstr "" msgid "Bed types supported by the printer" msgstr "Bed types supported by the printer" +msgid "First layer print sequence" +msgstr "" + msgid "This G-code is inserted at every layer change before lifting z" msgstr "This G-code is inserted at every layer change before lifting z." @@ -7712,10 +7721,10 @@ msgstr "Full fan speed at layer" msgid "" "Fan speed will be ramped up linearly from zero at layer " -"\"close_fan_the_first_x_layers\" to maximum at layer " -"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower " -"than \"close_fan_the_first_x_layers\", in which case the fan will be running " -"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." +"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer" +"\". \"full_fan_speed_layer\" will be ignored if lower than " +"\"close_fan_the_first_x_layers\", in which case the fan will be running at " +"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "" msgid "Support interface fan speed" diff --git a/localization/i18n/es/OrcaSlicer_es.po b/localization/i18n/es/OrcaSlicer_es.po index b11bf8cda4..1a2b93f58c 100644 --- a/localization/i18n/es/OrcaSlicer_es.po +++ b/localization/i18n/es/OrcaSlicer_es.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-08-14 19:56+0800\n" +"POT-Creation-Date: 2023-08-19 22:08+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -4967,6 +4967,12 @@ msgstr "Secuencia de impresión" msgid "Plate name" msgstr "Nombre de Bandeja" +msgid "Customize" +msgstr "" + +msgid "First Layer print sequence" +msgstr "" + msgid "Same as Global Bed Type" msgstr "Lo mismo que el Tipo de Cama Global" @@ -5411,8 +5417,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "Cuando grabamos timelapse sin cabezal de impresión, es recomendable añadir " "un \"Torre de Purga de Intervalo\" \n" @@ -6958,6 +6964,9 @@ msgstr "" msgid "Bed types supported by the printer" msgstr "Tipos de cama que admite la impresora" +msgid "First layer print sequence" +msgstr "" + msgid "This G-code is inserted at every layer change before lifting z" msgstr "Este G-Code se inserta en cada cambio de capa antes de levantar z" @@ -7997,10 +8006,10 @@ msgstr "Velocidad máxima del ventilador en la capa" msgid "" "Fan speed will be ramped up linearly from zero at layer " -"\"close_fan_the_first_x_layers\" to maximum at layer " -"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower " -"than \"close_fan_the_first_x_layers\", in which case the fan will be running " -"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." +"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer" +"\". \"full_fan_speed_layer\" will be ignored if lower than " +"\"close_fan_the_first_x_layers\", in which case the fan will be running at " +"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "" "La velocidad de ventilador se incrementará linealmente de cero a " "\"close_fan_the_first_x_layers\" al máximo de capa \"full_fan_speed_layer\". " @@ -10389,8 +10398,8 @@ msgid "" msgstr "" "Colocar en la cara\n" "¿Sabías que puedes orientar rápidamente un modelo para que una de sus caras " -"quede sobre el lecho de impresión? Seleccione la función \"Colocar en la " -"cara\" o pulse la tecla F." +"quede sobre el lecho de impresión? Seleccione la función \"Colocar en la cara" +"\" o pulse la tecla F." #: resources/data/hints.ini: [hint:Object List] msgid "" diff --git a/localization/i18n/fr/OrcaSlicer_fr.po b/localization/i18n/fr/OrcaSlicer_fr.po index 58a8f29c55..c83bef0556 100644 --- a/localization/i18n/fr/OrcaSlicer_fr.po +++ b/localization/i18n/fr/OrcaSlicer_fr.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-08-14 19:56+0800\n" +"POT-Creation-Date: 2023-08-19 22:08+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: Guislain Cyril\n" @@ -4979,6 +4979,12 @@ msgstr "Séquence d'impression" msgid "Plate name" msgstr "Nom du plateau" +msgid "Customize" +msgstr "" + +msgid "First Layer print sequence" +msgstr "" + msgid "Same as Global Bed Type" msgstr "Identique au type de plateau par défaut" @@ -5441,8 +5447,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "Lors de l'enregistrement d'un Timelapse sans tête d'outil, il est recommandé " "d'ajouter une \"Tour d’essuyage Timelapse\"\n" @@ -7011,6 +7017,9 @@ msgstr "" msgid "Bed types supported by the printer" msgstr "Types de plateaux pris en charge par l'imprimante" +msgid "First layer print sequence" +msgstr "" + msgid "This G-code is inserted at every layer change before lifting z" msgstr "Ce G-code est inséré à chaque changement de couche avant la levée en Z" @@ -8022,10 +8031,10 @@ msgstr "Vitesse maximale du ventilateur à la couche" msgid "" "Fan speed will be ramped up linearly from zero at layer " -"\"close_fan_the_first_x_layers\" to maximum at layer " -"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower " -"than \"close_fan_the_first_x_layers\", in which case the fan will be running " -"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." +"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer" +"\". \"full_fan_speed_layer\" will be ignored if lower than " +"\"close_fan_the_first_x_layers\", in which case the fan will be running at " +"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "" "La vitesse du ventilateur augmentera de manière linéaire à partir de zéro à " "la couche \"close_fan_the_first_x_layers\" jusqu’au maximum à la couche " diff --git a/localization/i18n/hu/OrcaSlicer_hu.po b/localization/i18n/hu/OrcaSlicer_hu.po index 1053c57a26..ac904af7a3 100644 --- a/localization/i18n/hu/OrcaSlicer_hu.po +++ b/localization/i18n/hu/OrcaSlicer_hu.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-08-14 19:56+0800\n" +"POT-Creation-Date: 2023-08-19 22:08+0800\n" "Language: hu\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -4889,6 +4889,12 @@ msgstr "Nyomtatás sorrendje" msgid "Plate name" msgstr "Plate name" +msgid "Customize" +msgstr "" + +msgid "First Layer print sequence" +msgstr "" + msgid "Same as Global Bed Type" msgstr "Ugyanaz, mint a globális tálca típusa" @@ -5321,8 +5327,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "Ha a nyomtatófej nélküli timelapse engedélyezve van, javasoljuk, hogy " "helyezz el a tálcán egy „Timelapse törlőtornyot“. Ehhez kattints jobb " @@ -6848,6 +6854,9 @@ msgstr "" msgid "Bed types supported by the printer" msgstr "Nyomtató által támogatott asztaltípusok" +msgid "First layer print sequence" +msgstr "" + msgid "This G-code is inserted at every layer change before lifting z" msgstr "Ez a G-kód minden rétegváltáshoz bekerül a Z tengely emelése előtt." @@ -7787,10 +7796,10 @@ msgstr "Teljes ventilátor fordulatszám ennél a rétegnél" msgid "" "Fan speed will be ramped up linearly from zero at layer " -"\"close_fan_the_first_x_layers\" to maximum at layer " -"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower " -"than \"close_fan_the_first_x_layers\", in which case the fan will be running " -"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." +"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer" +"\". \"full_fan_speed_layer\" will be ignored if lower than " +"\"close_fan_the_first_x_layers\", in which case the fan will be running at " +"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "" msgid "Support interface fan speed" diff --git a/localization/i18n/it/OrcaSlicer_it.po b/localization/i18n/it/OrcaSlicer_it.po index bbef881bb5..49bf1503e3 100644 --- a/localization/i18n/it/OrcaSlicer_it.po +++ b/localization/i18n/it/OrcaSlicer_it.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-08-14 19:56+0800\n" +"POT-Creation-Date: 2023-08-19 22:08+0800\n" "Language: it\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -4877,6 +4877,12 @@ msgstr "Print sequence" msgid "Plate name" msgstr "Nome Piatto" +msgid "Customize" +msgstr "" + +msgid "First Layer print sequence" +msgstr "" + msgid "Same as Global Bed Type" msgstr "Uguale al tipo di piano globale" @@ -5309,8 +5315,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "Quando si registra un timelapse senza testa di satmpa, si consiglia di " "aggiungere un \"Timelapse Torre di pulizia\"\n" @@ -6207,8 +6213,8 @@ msgid "" msgstr "" "È stato rilevato un aggiornamento importante che deve essere eseguito prima " "che la stampa possa continuare. Si desidera aggiornare ora? È possibile " -"effettuare l'aggiornamento anche in un secondo momento da \"Aggiorna " -"firmware\"." +"effettuare l'aggiornamento anche in un secondo momento da \"Aggiorna firmware" +"\"." msgid "" "The firmware version is abnormal. Repairing and updating are required before " @@ -6821,6 +6827,9 @@ msgstr "" msgid "Bed types supported by the printer" msgstr "Bed types supported by the printer" +msgid "First layer print sequence" +msgstr "" + msgid "This G-code is inserted at every layer change before lifting z" msgstr "This G-code is inserted at every layer change before lifting z." @@ -7760,10 +7769,10 @@ msgstr "Massima velocità della ventola al layer" msgid "" "Fan speed will be ramped up linearly from zero at layer " -"\"close_fan_the_first_x_layers\" to maximum at layer " -"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower " -"than \"close_fan_the_first_x_layers\", in which case the fan will be running " -"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." +"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer" +"\". \"full_fan_speed_layer\" will be ignored if lower than " +"\"close_fan_the_first_x_layers\", in which case the fan will be running at " +"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "" msgid "Support interface fan speed" @@ -11827,8 +11836,8 @@ msgstr "" #~ "Quando si registra un timelapse senza testa di satmpa, si consiglia di " #~ "aggiungere un \"Timelapse Torre di pulizia\"\n" #~ "facendo clic con il pulsante destro del mouse sulla posizione vuota del " -#~ "piatto e scegli \"Aggiungi primitiva\" ->\"Timelapse Torre di " -#~ "pulizia\"».\n" +#~ "piatto e scegli \"Aggiungi primitiva\" ->\"Timelapse Torre di pulizia" +#~ "\"».\n" #~ msgid "" #~ "When sparse infill density is low, the internal solid infill or internal " diff --git a/localization/i18n/ja/OrcaSlicer_ja.po b/localization/i18n/ja/OrcaSlicer_ja.po index 4fbce6a809..a52cb62e00 100644 --- a/localization/i18n/ja/OrcaSlicer_ja.po +++ b/localization/i18n/ja/OrcaSlicer_ja.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-08-14 19:56+0800\n" +"POT-Creation-Date: 2023-08-19 22:08+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -4767,6 +4767,12 @@ msgstr "造形シーケンス" msgid "Plate name" msgstr "Plate name" +msgid "Customize" +msgstr "" + +msgid "First Layer print sequence" +msgstr "" + msgid "Same as Global Bed Type" msgstr "全般設定の「ベッドタイプ」と同様" @@ -5171,8 +5177,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "ヘッド無しのタイムラプスビデオを録画する時に、「タイムラプスプライムタワー」" "を追加してください。プレートで右クリックして、「プリミティブを追加」→「タイム" @@ -6616,6 +6622,9 @@ msgstr "" msgid "Bed types supported by the printer" msgstr "適応ベッド種類" +msgid "First layer print sequence" +msgstr "" + msgid "This G-code is inserted at every layer change before lifting z" msgstr "積層が変わる直前に実行するG-codeです。" @@ -7508,10 +7517,10 @@ msgstr "最大回転速度の積層" msgid "" "Fan speed will be ramped up linearly from zero at layer " -"\"close_fan_the_first_x_layers\" to maximum at layer " -"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower " -"than \"close_fan_the_first_x_layers\", in which case the fan will be running " -"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." +"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer" +"\". \"full_fan_speed_layer\" will be ignored if lower than " +"\"close_fan_the_first_x_layers\", in which case the fan will be running at " +"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "" msgid "Support interface fan speed" diff --git a/localization/i18n/ko/OrcaSlicer_ko.po b/localization/i18n/ko/OrcaSlicer_ko.po index f32fb88072..555c373552 100644 --- a/localization/i18n/ko/OrcaSlicer_ko.po +++ b/localization/i18n/ko/OrcaSlicer_ko.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-08-14 19:56+0800\n" +"POT-Creation-Date: 2023-08-19 22:08+0800\n" "PO-Revision-Date: 2023-08-03 10:45+0900\n" "Last-Translator: Hotsolidinfill\n" "Language-Team: \n" @@ -4829,6 +4829,12 @@ msgstr "출력 순서" msgid "Plate name" msgstr "플레이트 이름" +msgid "Customize" +msgstr "" + +msgid "First Layer print sequence" +msgstr "" + msgid "Same as Global Bed Type" msgstr "글로벌 베드유형과 동일" @@ -5243,8 +5249,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "툴헤드 없이 시간 경과를 기록할 경우 \"시간 경과 제거 타워\"를 추가하는 것이 " "좋습니다\n" @@ -6728,6 +6734,9 @@ msgstr "" msgid "Bed types supported by the printer" msgstr "프린터가 지원하는 침대 유형" +msgid "First layer print sequence" +msgstr "" + msgid "This G-code is inserted at every layer change before lifting z" msgstr "이 G코드는 Z를 올리기 전에 모든 레이어 변경에 삽입됩니다" @@ -7675,10 +7684,10 @@ msgstr "팬 최대 속도 레이어" msgid "" "Fan speed will be ramped up linearly from zero at layer " -"\"close_fan_the_first_x_layers\" to maximum at layer " -"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower " -"than \"close_fan_the_first_x_layers\", in which case the fan will be running " -"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." +"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer" +"\". \"full_fan_speed_layer\" will be ignored if lower than " +"\"close_fan_the_first_x_layers\", in which case the fan will be running at " +"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "" "팬 속도는 \"close_fan_the_first_x_layers\" 의 0에서 \"full_fan_speed_layer\" " "의 최고 속도까지 선형적으로 증가합니다. \"full_fan_speed_layer\"가 " diff --git a/localization/i18n/nl/OrcaSlicer_nl.po b/localization/i18n/nl/OrcaSlicer_nl.po index 227e9344bf..48d68bedd1 100644 --- a/localization/i18n/nl/OrcaSlicer_nl.po +++ b/localization/i18n/nl/OrcaSlicer_nl.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-08-14 19:56+0800\n" +"POT-Creation-Date: 2023-08-19 22:08+0800\n" "Language: nl\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -4933,6 +4933,12 @@ msgstr "Afdrukvolgorde" msgid "Plate name" msgstr "Plate name" +msgid "Customize" +msgstr "" + +msgid "First Layer print sequence" +msgstr "" + msgid "Same as Global Bed Type" msgstr "Hetzelfde als Global Bed Type" @@ -5379,8 +5385,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "Bij het opnemen van timelapse zonder toolhead is het aan te raden om een " "„Timelapse Wipe Tower” toe te voegen \n" @@ -6923,6 +6929,9 @@ msgstr "" msgid "Bed types supported by the printer" msgstr "Printbedden ondersteund door de printer" +msgid "First layer print sequence" +msgstr "" + msgid "This G-code is inserted at every layer change before lifting z" msgstr "" "De G-code wordt bij iedere laagwisseling toegevoegd voor het optillen van Z" @@ -7874,10 +7883,10 @@ msgstr "Volledige snelheid op laag" msgid "" "Fan speed will be ramped up linearly from zero at layer " -"\"close_fan_the_first_x_layers\" to maximum at layer " -"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower " -"than \"close_fan_the_first_x_layers\", in which case the fan will be running " -"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." +"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer" +"\". \"full_fan_speed_layer\" will be ignored if lower than " +"\"close_fan_the_first_x_layers\", in which case the fan will be running at " +"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "" msgid "Support interface fan speed" diff --git a/localization/i18n/ru/OrcaSlicer_ru.po b/localization/i18n/ru/OrcaSlicer_ru.po index 4ad10b0e90..1bf8430ba8 100644 --- a/localization/i18n/ru/OrcaSlicer_ru.po +++ b/localization/i18n/ru/OrcaSlicer_ru.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: OrcaSlicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-08-14 19:56+0800\n" +"POT-Creation-Date: 2023-08-19 22:08+0800\n" "PO-Revision-Date: 2023-08-08 15:05+0300\n" "Last-Translator: Ilya \n" "Language-Team: SPb 3D Printing\n" @@ -15,8 +15,8 @@ msgstr "" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && " -"n%10<=4 && (n%100<12 || n%100>14) ? 1 : 2);\n" +"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n" +"%10<=4 && (n%100<12 || n%100>14) ? 1 : 2);\n" "X-Generator: Poedit 3.3.2\n" msgid "Supports Painting" @@ -4949,6 +4949,12 @@ msgstr "Последовательность печати" msgid "Plate name" msgstr "Название области" +msgid "Customize" +msgstr "" + +msgid "First Layer print sequence" +msgstr "" + msgid "Same as Global Bed Type" msgstr "То же, что и глобальный тип стола" @@ -5386,8 +5392,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "При записи таймлапса без инструментальной головки рекомендуется добавить " "\"Timelapse Wipe Tower\"\n" @@ -6915,6 +6921,9 @@ msgstr "" msgid "Bed types supported by the printer" msgstr "Типы столов, поддерживаемые принтером" +msgid "First layer print sequence" +msgstr "" + msgid "This G-code is inserted at every layer change before lifting z" msgstr "Типы столов, поддерживаемые принтером" @@ -7931,10 +7940,10 @@ msgstr "Полная скорость вентилятора на слое" msgid "" "Fan speed will be ramped up linearly from zero at layer " -"\"close_fan_the_first_x_layers\" to maximum at layer " -"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower " -"than \"close_fan_the_first_x_layers\", in which case the fan will be running " -"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." +"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer" +"\". \"full_fan_speed_layer\" will be ignored if lower than " +"\"close_fan_the_first_x_layers\", in which case the fan will be running at " +"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "" "Скорость вентилятора линейно увеличивается от нуля на уровне " "«close_fan_the_first_x_layers» до максимума на уровне " diff --git a/localization/i18n/sv/OrcaSlicer_sv.po b/localization/i18n/sv/OrcaSlicer_sv.po index 2c7dde1678..af0edb4f5b 100644 --- a/localization/i18n/sv/OrcaSlicer_sv.po +++ b/localization/i18n/sv/OrcaSlicer_sv.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-08-14 19:56+0800\n" +"POT-Creation-Date: 2023-08-19 22:08+0800\n" "Language: sv\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -4862,6 +4862,12 @@ msgstr "Utskrifts sekvens" msgid "Plate name" msgstr "Plattans namn" +msgid "Customize" +msgstr "" + +msgid "First Layer print sequence" +msgstr "" + msgid "Same as Global Bed Type" msgstr "Samma som Global Bed Type" @@ -5293,8 +5299,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "När du spelar in timelapse utan verktygshuvud rekommenderas att du lägger " "till ett \"Timelapse Wipe Tower\".\n" @@ -6791,6 +6797,9 @@ msgstr "" msgid "Bed types supported by the printer" msgstr "Byggplattans typ stöds av skrivaren" +msgid "First layer print sequence" +msgstr "" + msgid "This G-code is inserted at every layer change before lifting z" msgstr "Denna G-kod används för varje lager innan Z axis lyfts" @@ -7071,9 +7080,9 @@ msgid "" "quality for needle and small details" msgstr "" "Aktivera detta val för att sänka utskifts hastigheten för att göra den sista " -"lager tiden inte kortare än lager tidströskeln \"Max fläkthastighets " -"tröskel\", detta så att lager kan kylas under en längre tid. Detta kan " -"förbättra kylnings kvaliteten för små detaljer" +"lager tiden inte kortare än lager tidströskeln \"Max fläkthastighets tröskel" +"\", detta så att lager kan kylas under en längre tid. Detta kan förbättra " +"kylnings kvaliteten för små detaljer" msgid "Normal printing" msgstr "Normal utskrift" @@ -7719,10 +7728,10 @@ msgstr "Full fläkthastighet vid lager" msgid "" "Fan speed will be ramped up linearly from zero at layer " -"\"close_fan_the_first_x_layers\" to maximum at layer " -"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower " -"than \"close_fan_the_first_x_layers\", in which case the fan will be running " -"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." +"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer" +"\". \"full_fan_speed_layer\" will be ignored if lower than " +"\"close_fan_the_first_x_layers\", in which case the fan will be running at " +"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "" msgid "Support interface fan speed" @@ -10495,9 +10504,9 @@ msgstr "" #~ "Tack för att du har köpt en Bambu Lab enhet. Innan du använder din Bambu " #~ "Lab enhet ska du läsa villkoren. Genom att klicka för att godkänna " #~ "användningen av din Bambu Lab enhet godkänner du att följa " -#~ "sekretesspolicyn och användningsvillkoren (gemensamt kallade " -#~ "\"Villkor\"). Om du inte följer eller samtycker till Bambu Labs " -#~ "integritetspolicy ska du inte använda Bambu Labs utrustning och tjänster." +#~ "sekretesspolicyn och användningsvillkoren (gemensamt kallade \"Villkor" +#~ "\"). Om du inte följer eller samtycker till Bambu Labs integritetspolicy " +#~ "ska du inte använda Bambu Labs utrustning och tjänster." #~ msgid "and" #~ msgstr "och" diff --git a/localization/i18n/uk/OrcaSlicer_uk.po b/localization/i18n/uk/OrcaSlicer_uk.po index a5930ba08b..71904d9da9 100644 --- a/localization/i18n/uk/OrcaSlicer_uk.po +++ b/localization/i18n/uk/OrcaSlicer_uk.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-08-14 19:56+0800\n" +"POT-Creation-Date: 2023-08-19 22:08+0800\n" "PO-Revision-Date: 2023-08-10 20:25-0400\n" "Last-Translator: \n" "Language-Team: \n" @@ -15,8 +15,8 @@ msgstr "" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && " -"n%10<=4 && (n%100<12 || n%100>14) ? 1 : 2);\n" +"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n" +"%10<=4 && (n%100<12 || n%100>14) ? 1 : 2);\n" "X-Generator: Poedit 3.3.2\n" msgid "Supports Painting" @@ -4939,6 +4939,12 @@ msgstr "Послідовність друку" msgid "Plate name" msgstr "Назва пластини" +msgid "Customize" +msgstr "" + +msgid "First Layer print sequence" +msgstr "" + msgid "Same as Global Bed Type" msgstr "Те ж, що й глобальний тип столу" @@ -5368,8 +5374,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "При записі таймлапсу без інструментальної головки рекомендується додати " "“Timelapse Wipe Tower” \n" @@ -6889,6 +6895,9 @@ msgstr "" msgid "Bed types supported by the printer" msgstr "Типи ліжок, які підтримує принтер" +msgid "First layer print sequence" +msgstr "" + msgid "This G-code is inserted at every layer change before lifting z" msgstr "Типи ліжок, які підтримує принтер" @@ -7888,10 +7897,10 @@ msgstr "Повна швидкість вентилятора на шарі" msgid "" "Fan speed will be ramped up linearly from zero at layer " -"\"close_fan_the_first_x_layers\" to maximum at layer " -"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower " -"than \"close_fan_the_first_x_layers\", in which case the fan will be running " -"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." +"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer" +"\". \"full_fan_speed_layer\" will be ignored if lower than " +"\"close_fan_the_first_x_layers\", in which case the fan will be running at " +"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "" "Швидкість вентилятора лінійно збільшується від нуля на " "рівні«close_fan_the_first_x_layers» до максимуму на рівні " diff --git a/localization/i18n/zh_cn/OrcaSlicer_zh_CN.po b/localization/i18n/zh_cn/OrcaSlicer_zh_CN.po index c5453a06c8..ab81c3f0c9 100644 --- a/localization/i18n/zh_cn/OrcaSlicer_zh_CN.po +++ b/localization/i18n/zh_cn/OrcaSlicer_zh_CN.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: Slic3rPE\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-08-14 19:56+0800\n" +"POT-Creation-Date: 2023-08-19 22:08+0800\n" "PO-Revision-Date: 2023-04-01 13:21+0800\n" "Last-Translator: Jiang Yue \n" "Language-Team: \n" @@ -4719,6 +4719,12 @@ msgstr "打印顺序" msgid "Plate name" msgstr "盘名称" +msgid "Customize" +msgstr "自定义" + +msgid "First Layer print sequence" +msgstr "" + msgid "Same as Global Bed Type" msgstr "跟随全局热床类型" @@ -5124,8 +5130,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "在录制无工具头延时摄影视频时，建议添加“延时摄影擦料塔”\n" "右键单击打印板的空白位置，选择“添加标准模型”->“延时摄影擦料塔”。" @@ -6529,6 +6535,9 @@ msgstr "首层热床温度。0值表示这个耗材丝不支持纹理PEI热床" msgid "Bed types supported by the printer" msgstr "打印机所支持的热床类型" +msgid "First layer print sequence" +msgstr "" + msgid "This G-code is inserted at every layer change before lifting z" msgstr "在每次换层抬升z高度之前插入这段G-code" @@ -7421,10 +7430,10 @@ msgstr "满速风扇在" msgid "" "Fan speed will be ramped up linearly from zero at layer " -"\"close_fan_the_first_x_layers\" to maximum at layer " -"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower " -"than \"close_fan_the_first_x_layers\", in which case the fan will be running " -"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." +"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer" +"\". \"full_fan_speed_layer\" will be ignored if lower than " +"\"close_fan_the_first_x_layers\", in which case the fan will be running at " +"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "" "风扇速度将从“禁用第一层”的零线性上升到“全风扇速度层”的最大。如果低于“禁用风扇" "第一层”，则“全风扇速度第一层”将被忽略，在这种情况下，风扇将在“禁用风扇第一" @@ -9713,6 +9722,12 @@ msgstr "" "提高强度\n" "你知道吗？你可以使用更多的墙层数和更高的疏散填充密度来提高模型的强度。" +#~ msgid "First layer filament sequence" +#~ msgstr "首层耗材打印顺序" + +#~ msgid "The failed test result has been dropped." +#~ msgstr "测试失败的结果已被删除。" + #~ msgid "" #~ "The configuration may be generated by a newer version of BambuStudio." #~ msgstr "此配置可能由新版本的Bambu Studio生成。" @@ -14583,8 +14598,8 @@ msgstr "" #~ msgstr "正在准备设置页" #~ msgid "" -#~ "You have the following presets with saved options for \"Print Host " -#~ "upload\"" +#~ "You have the following presets with saved options for \"Print Host upload" +#~ "\"" #~ msgstr "您的以下预设中包含未保存的选项“打印主机上传”" #~ msgid "" diff --git a/resources/i18n/de/OrcaSlicer.mo b/resources/i18n/de/OrcaSlicer.mo index f444cc93e0..2e7ffb49af 100644 Binary files a/resources/i18n/de/OrcaSlicer.mo and b/resources/i18n/de/OrcaSlicer.mo differ diff --git a/resources/i18n/en/OrcaSlicer.mo b/resources/i18n/en/OrcaSlicer.mo index 9cce2c316a..4b0fb4706c 100644 Binary files a/resources/i18n/en/OrcaSlicer.mo and b/resources/i18n/en/OrcaSlicer.mo differ diff --git a/resources/i18n/es/OrcaSlicer.mo b/resources/i18n/es/OrcaSlicer.mo index 5b21077dc9..540756fc4b 100644 Binary files a/resources/i18n/es/OrcaSlicer.mo and b/resources/i18n/es/OrcaSlicer.mo differ diff --git a/resources/i18n/zh_cn/OrcaSlicer.mo b/resources/i18n/zh_cn/OrcaSlicer.mo index 468dd44a6f..645d911d6f 100644 Binary files a/resources/i18n/zh_cn/OrcaSlicer.mo and b/resources/i18n/zh_cn/OrcaSlicer.mo differ